Analog Devices

LT1191CN8 - Ultra-High-Speed Video Op Amp | Analog Devices

MPN: LT1191CN8 ✗ پایان تولید
8-PDIP Package
حداقل سفارش: 1 |

LT1191CN8 نمای کلی

The Analog Devices LT1191CN8 is an ultra-high-speed, single-channel operational amplifier designed for video amplification and other wideband signal-conditioning applications. It is a standard general-purpose device in an 8-pin PDIP package with through-hole terminals, providing a straightforward panel, laboratory, and prototype implementation. The LT1191 family is associated with high-speed video amplification, where useful bandwidth, low distortion, fast settling behavior, and straightforward signal routing are more important than the low power consumption associated with precision amplifiers.

An operational amplifier is a high-gain, active differential-input device used to amplify a voltage difference between its inverting and non-inverting inputs. In the signal-chain hierarchy, the LT1191CN8 belongs to the operational-amplifier family within analog integrated circuits and can be used as a general-purpose voltage amplifier, video gain stage, line driver, or instrumentation block. Its single-channel architecture simplifies designs requiring one independently controlled high-speed signal path.

The key feature of the LT1191CN8 is its ultra-high-speed video-amplifier positioning. It is cataloged as a one-channel, standard, general-purpose amplifier with eight through-hole pins. This combination makes it useful where an existing through-hole video board must be serviced, prototyped, or maintained without converting the design to a surface-mount footprint. The older PDIP construction also provides generous physical spacing between leads, which can simplify breadboard and socket-based assembly.

Analog Devices acquired Linear Technology, and the LT1191 nomenclature remains associated with the original Linear Technology high-speed amplifier product line. The device is therefore best understood as a legacy but purpose-built video amplifier rather than as a low-noise precision op amp. Its design priority is high-frequency amplification, so applications should preserve short feedback paths, controlled source and load impedances, and a compact board layout to prevent parasitic capacitance from reducing practical bandwidth.

Typical uses include video distribution and gain control, high-speed instrumentation, pulse and waveform conditioning, active termination, laboratory test equipment, and retrofit or repair of legacy video electronics. In each case, the amplifier operates in a conventional feedback configuration, with external resistors setting gain and the source and load arranged to match the intended signal path. Power-supply bypassing and grounding remain important because the device’s wideband behavior can couple supply and return-path disturbances into the output signal.

The principal design trade-off is the 8-pin PDIP package. It is easy to prototype and replace manually, but it occupies more board area than an equivalent surface-mount package and is less suitable for compact production assemblies. Confirm the complete electrical limits and pin arrangement in the manufacturer datasheet before finalizing a high-gain or high-power design, especially when driving long cables or low-impedance loads.

This page consolidates the device’s catalog identity, package information, sourcing guidance, comparison criteria, and practical replacement considerations. It also distinguishes documented drop-in candidates from alternatives that merely perform a similar function, helping engineers confirm both mechanical fit and electrical behavior before committing to a replacement.

جایگزین‌های drop-in برای LT1191CN8 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

LT1190CN8

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-PDIP
Same single-channel 8-PDIP architecture; gain-bandwidth and compensation differences require circuit-level verification.

📋 جایگزین مرجع (خارج از کاتالوگ)

LT1192CN8

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-PDIP
Same single-channel 8-PDIP family construction; bandwidth and compensation characteristics differ from LT1191.

📋 جایگزین مرجع (خارج از کاتالوگ)

LT1194CN8

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-PDIP
Same 8-PDIP through-hole footprint and single-channel format; AC gain-bandwidth target differs.

📋 جایگزین مرجع (خارج از کاتالوگ)

LT1195CN8

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-PDIP
Same single-channel PDIP package; slew-rate, distortion, and compensation requirements must be rechecked.

📋 جایگزین مرجع (خارج از کاتالوگ)

LT1196CN8

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-PDIP
Same 8-pin through-hole video-amplifier format; high-frequency gain and load-drive differences require verification.

📋 جایگزین مرجع (خارج از کاتالوگ)

LT1191CN8 حداکثر مقادیر مجاز و مشخصات الکتریکی

Amplifier Type Ultra-high-speed operational amplifier
Number of Channels 1 channel
Product Classification Standard general-purpose video amplifier
Package Type 8-PDIP
Terminal Count 8 terminals
Terminal Form Through-hole
Temperature Grade Commercial grade
نوع نصب Through-hole PCB mount
Package Shape Rectangular

راهنمای پیکربندی پین LT1191CN8 rectangular

پیکربندی پین برای LT1191CN8 (پکیج rectangular). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج rectangular برای LT1191CN8

داده پین‌آوت تفصیلی موجود نیست برای LT1191CN8.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

LT1191CN8 مناسب است برای 6 کاربردs: Video Gain and Distribution, Laboratory Waveform Conditioning, Pulse and Digital Waveform Conditioning, Legacy Video Equipment Repair, Active Termination and Line Driving, Industrial Test and Measurement.

📺

Video Gain and Distribution

The LT1191CN8 is suitable for a wideband video gain or distribution stage when the board is built around an 8-PDIP through-hole footprint. Its single-channel architecture gives an independent amplifier path, while the ultra-high-speed video-amplifier positioning supports signals whose bandwidth approaches the useful limits of the circuit and cabling. The amplifier is normally configured with external feedback resistors, and the feedback loop should remain compact to limit parasitic feedback. Source and load impedances must be selected to avoid gain peaking and excessive output-current demand. Because the package has eight through-hole pins, the device also suits prototype boards, educational platforms, and legacy video equipment where a surface-mount footprint would require additional PCB redesign. Confirm the required closed-loop gain, supply voltage, output swing, and load capacitance against the Analog Devices datasheet before fixing the gain network.

🔧

Laboratory Waveform Conditioning

The LT1191CN8 can serve as the active element in laboratory waveform-conditioning and pulse-shaping equipment, where the 8-PDIP package makes breadboard and socket-based construction straightforward. A single amplifier channel is sufficient for one input/output route, and external resistors establish the required gain. The critical implementation consideration is layout: high-speed feedback nodes must be short, the ground return must be continuous, and supply bypass capacitors should be positioned close to the relevant pins. Long test leads and capacitance can alter the intended response even when the nominal gain is correct. Before using the device with arbitrary waveforms, verify input common-mode range, output swing, slew rate, and stable gain combinations in the manufacturer datasheet. This makes the LT1191CN8 most practical for reproducible instrumentation prototypes and restoration of existing laboratory signal paths.

⚡

Pulse and Digital Waveform Conditioning

The LT1191CN8 is appropriate for conditioning a pulse or digital-derived waveform when edge fidelity is more important than the low power consumption of a precision op amp. Its single-channel ultra-high-speed video-amplifier design can provide gain and level adjustment ahead of a comparator, logic input, timing circuit, or measurement instrument. Keep the feedback component close to the amplifier and use a ground reference that does not share a switching return path with digital timing circuitry. The 8-PDIP package is advantageous for quick replacement and service, although its larger footprint is less attractive for compact test equipment. Verify the maximum signal bandwidth, output drive, output-voltage range, and supply requirements in the Analog Devices datasheet. Also check that the selected closed-loop gain remains stable with the intended source impedance and cable capacitance before using it as a logic-interface replacement.

🔧

Legacy Video Equipment Repair

The LT1191CN8 is especially useful for repairing an 8-PDIP video-amplifier board when maintaining the original mechanical footprint is more important than miniaturization. The commercial-grade, single-channel device and through-hole construction support socketed replacement, manual rework, and straightforward test-point access. During repair, reproduce the original feedback network, supply arrangement, and termination impedance before substituting a modern amplifier. The replacement procedure should include checks for DC output offset, unstable oscillation, output clipping, and excessive supply current. A through-hole package also makes it easier to compare the failed device with a known-good board using the same probe geometry. Record the exact non-PBF MPN when the approved assembly requires that lead-finish configuration. Verify pin functions and maximum ratings against the manufacturer datasheet rather than relying on the physical outline alone.

🌐

Active Termination and Line Driving

The LT1191CN8 can be evaluated for active termination or low-impedance line-driving functions within a wideband analog system. Its ultra-high-speed video-amplifier construction is relevant when the output must preserve fast edges and maintain controlled impedance through a short cable or termination network. The 8-PDIP package provides a practical implementation format for test fixtures and compact laboratory units, and the single-channel architecture supports one independent termination path per device. Correct operation depends on selecting feedback components and load values compatible with the required gain and output-current capability. Avoid long point-to-point wiring, maintain a low-impedance ground plane, and place supply bypass components close to the device. Confirm the output-current, output-voltage, slew-rate, and stability limits for the intended load in the manufacturer datasheet before using the amplifier in a production cable interface.

🏭

Industrial Test and Measurement

The LT1191CN8 is suitable for industrial test and measurement prototypes that require a wideband amplifier with a conventional through-hole interface. One channel can amplify a sensor or instrument output before digitization, comparison, or recording, while the eight-pin PDIP construction simplifies assembly and maintenance. The primary engineering concern is preserving the intended signal integrity across the full measurement bandwidth. Use short traces, avoid test-point capacitance where possible, provide local supply bypassing, and return analog current through a quiet ground region. The amplifier should be selected only after confirming that its input range, output swing, load drive, and stability permit the selected operating point. Because commercial availability may be constrained, request lifecycle and allocation information before committing it to new production equipment. For compact production systems, a surface-mount high-speed amplifier may be more practical even when it requires a different footprint.

What is the LT1191CN8?
The LT1191CN8 is a single-channel, ultra-high-speed operational amplifier optimized for video amplification and wideband signal conditioning. According to the Analog Devices manufacturer datasheet, it is offered in an 8-PDIP through-hole package and is categorized as a standard general-purpose video amplifier. The single-channel configuration makes it appropriate for one high-speed analog path per device.
What package does the LT1191CN8 use?
The LT1191CN8 uses an 8-PDIP package with eight through-hole terminals and a rectangular package shape. Its lead spacing is useful for prototyping and legacy-board maintenance because it does not require a fine-pitch surface-mount assembly. The package designation is confirmed by the manufacturer’s product information and distributor catalog records for the exact LT1191CN8 part number.
Is the LT1191CN8 still available for purchase?
The LT1191CN8 is a legacy commercial-grade operational amplifier, and its current production status should be confirmed before a new design is released. Use the Request a Quote form on this page to request current availability, minimum order quantity, and lead time for the exact 8-PDIP part number. The quoted configuration should remain LT1191CN8 rather than the similarly named lead-free variant.
Where can I download the LT1191CN8 datasheet PDF?
Download the LT1191CN8 datasheet from the official Analog Devices documentation link on this page. The manufacturer datasheet is the authoritative source for the complete pin description, recommended operating conditions, electrical characteristics, and typical application circuits. Use the document-number and revision shown on the downloaded manufacturer document when recording it in an engineering qualification record.
Where can I find the LT1191CN8 pinout?
The LT1191CN8 pin assignment is documented in the Analog Devices manufacturer datasheet under the package and pin-description information. The device has eight through-hole pins in a PDIP arrangement. Before assigning PCB tracks, use the package drawing and pin-description table in the manufacturer document to identify power, ground, input, output, compensation, and any configuration pins.
How much does the LT1191CN8 cost?
The current price of the LT1191CN8 depends on market availability, order quantity, and whether the exact non-PBF 8-PDIP configuration remains production-supported. Submit a request through the Request a Quote form on this page for a current quotation. Include the required quantity, target delivery date, and whether you need tube, tray, or other authorized packaging.
What is the lead time for an LT1191CN8 order?
The lead time for LT1191CN8 depends on current manufacturer inventory, component lifecycle status, and the quantity being ordered. Request a Quote on this page for a current lead-time confirmation and a factory-availability statement for the exact 8-PDIP MPN. For maintenance work, include the target assembly date so obsolete or long-lead inventory can be identified during sourcing review.
Is the LT1191CN8 in stock?
Inventory for LT1191CN8 changes with order volume and regional supply conditions, so stock should be confirmed for the exact MPN rather than inferred from general family listings. Use the Request a Quote form on this page and specify the quantity and target date. This avoids accepting a shipment of the differently suffixed LT1191CN8#PBF configuration when your assembly requires the original non-PBF part.
What is the difference between the LT1191CN8 and LT1191CN8#PBF?
Both catalog records identify an 8-PDIP, single-channel general-purpose video amplifier, but the #PBF suffix conventionally distinguishes the lead-free termination finish from the original LT1191CN8 configuration. The two suffixes should not be treated as automatically interchangeable without checking lead finish, marking, procurement requirements, and customer drawings. Both forms appear in distributor records, but the exact ordering code must remain controlled through qualification.
When should I choose the LT1191CN8 over another video amplifier?
Choose the LT1191CN8 when maintaining or reproducing a through-hole video-amplifier design where the eight-pin PDIP footprint, single-channel architecture, and legacy supply-chain continuity are important. It is less attractive for a new compact assembly because surface-mount packages normally conserve board area. Verify bandwidth, supply voltage, load drive, distortion, and compensation requirements against the manufacturer datasheet before selecting it for a new signal chain.
Is the LT1191CN8 suitable for high-speed video applications?
Yes, the LT1191CN8 is specifically positioned as an ultra-high-speed video operational amplifier with one channel in an 8-PDIP package. The manufacturer datasheet provides the authoritative bandwidth, slew-rate, gain, and output-drive limits. Practical performance also depends on source impedance, load capacitance, feedback topology, trace length, supply decoupling, and a low-inductance ground return.
What can replace the LT1191CN8?
The best replacement is the part that matches all four mechanical and electrical requirements: an 8-PDIP footprint, the same pin functions, compatible supply voltage, and adequate bandwidth and output drive for the target signal path. LT1191-family devices in the same PDIP form may be candidates, but each must be checked against the manufacturer pinout and electrical tables. A functional video amplifier with a different package or pin arrangement is not a drop-in replacement.
Are the LT1191CN8 and LT1192CN8 pin-compatible?
The LT1191CN8 and LT1192CN8 belong to the same LT1191 family and can be evaluated as same-package candidates, but pin compatibility still depends on the exact suffix and manufacturer pin table. Confirm the supply connections, configuration pins, and package drawing in each datasheet. The practical selection point is usually the electrical performance required by the video signal path rather than package fit alone.
What are the key specifications of LT1191CN8 that engineers should know?
The key catalog specifications are one amplifier channel, an ultra-high-speed video-amplifier function, an 8-PDIP package, eight through-hole terminals, and a commercial temperature grade. According to the Analog Devices manufacturer datasheet, these characteristics place the device between general-purpose op amps and specialized wideband video amplifiers. Detailed voltage, bandwidth, slew-rate, and loading limits should be taken from the datasheet’s electrical-characteristics tables.
What is the best Analog Devices equivalent for the LT1191CN8?
An Analog Devices equivalent should be selected from the LT1191 family or another manufacturer-confirmed 8-pin PDIP video amplifier with the same pin functions and comparable electrical limits. Package equality alone does not establish drop-in compatibility. Compare supply range, gain, unity-gain bandwidth, slew rate, output-current capability, noise, distortion, and compensation method before approving a substitute for the LT1191CN8.
How should I design the PCB around the LT1191CN8?
Route the feedback loop as a short, compact loop and keep the op-amp input and output connections away from noisy switching nodes. Place power-decoupling capacitors close to the supply and ground pins, use a continuous ground plane, and avoid long parallel runs that can add capacitive loading. Follow the Analog Devices datasheet for lead dimensions, decoupling recommendations, and any configuration-resistor values.

داده‌های مرجع مهندسی برای LT1191CN8 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Select the LT1191CN8 when maintaining or reproducing a legacy 8-PDIP video-amplifier circuit and its single-channel wideband behavior are the primary requirements. Its through-hole construction is particularly useful for sockets, breadboards, manual repair, and prototype boards, while its video-amplifier positioning suits high-speed signal paths. LT1190CN8 and LT1192CN8 are the closest same-family candidates when their manufacturer electrical tables show a better bandwidth, compensation, supply, or load-drive match. LT1194CN8, LT1195CN8, and LT1196CN8 should be considered only after verifying their exact pin functions and application requirements. Do not choose any candidate from package shape alone: an 8-PDIP outline can hide different compensation or configuration pins. For a new compact product, a surface-mount high-speed amplifier may be preferable, but it requires a new footprint and signal-integrity review. For exact LT1191CN8 procurement, maintain the original suffix rather than accepting a lead-free or functionally similar variant without qualification.

مقایسه با جایگزین‌ها

پارامتر این محصول LT1190CN8 LT1192CN8 LT1194CN8 LT1195CN8 LT1196CN8
Package 8-PDIP through-hole 8-PDIP through-hole 8-PDIP through-hole 8-PDIP through-hole 8-PDIP through-hole 8-PDIP through-hole
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Channel Count 1 channel 1 channel 1 channel 1 channel 1 channel 1 channel
Product Function Ultra-high-speed video operational amplifier Ultra-high-speed video operational amplifier Ultra-high-speed video operational amplifier Ultra-high-speed video operational amplifier Ultra-high-speed video operational amplifier Ultra-high-speed video operational amplifier
Terminal Count 8 terminals 8 terminals 8 terminals 8 terminals 8 terminals 8 terminals
Terminal Form Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole

تفاوت‌های کلیدی

  • Single-channel high-speed video amplifier in a serviceable through-hole package (در مقابلLT1192CN8)
  • Direct fit for legacy 8-pin video-amplifier boards (در مقابلLT1196CN8)
  • Family option for bandwidth and compensation optimization (در مقابلLT1190CN8)

یادداشت‌های طراحی

Keep the op-amp feedback loop physically short and route both input and feedback conductors away from clocks, switching converters, and high-current return paths. The eight-pin PDIP arrangement provides convenient lead spacing, but long traces can still introduce parasitic capacitance that changes closed-loop gain or causes instability. Use a continuous ground plane, terminate unused inputs according to the manufacturer recommendations, and place a low-inductance return from the device directly to the supply-decoupling network.

Use the supply configuration and decoupling arrangement specified in the Analog Devices manufacturer datasheet. Place the bulk and high-frequency bypass capacitors close to the device rather than near the power-source connector. Check output-current demand, output-voltage headroom, and dissipation under the intended load before finalizing the power rails. Because the target is a commercial-grade legacy device, include supply sequencing and absolute-maximum conditions in the hardware review.

Evaluate the complete source-to-load path rather than relying on the nominal closed-loop gain alone. Account for source impedance, cable capacitance, load capacitance, probe capacitance, and output-current requirements. Start with a conservative gain and verify stability with an oscilloscope before increasing bandwidth or output swing. For replacement decisions, compare the candidate's pin functions, supply range, slew rate, gain-bandwidth product, and output drive against the LT1191CN1 operating point.

Do not substitute the LT1191CN8#PBF configuration solely because both use an 8-PDIP outline. Confirm the exact approved MPN, lead finish, markings, and procurement requirements before substitution. Likewise, do not assume that every 8-pin video amplifier is pin-compatible: compensation, shutdown, offset-correction, or configuration pins can differ. Compare the manufacturer pin-description table and application circuit for each candidate before releasing a replacement.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The catalog record identifies a commercial-grade 8-PDIP device, but no explicit RoHS, REACH, halogen-free, or conflict-minerals declaration was identified for the exact non-PBF ordering code. AEC-Q100 is not applicable because the device is a commercial-grade operational amplifier rather than an automotive-qualified component.

تاریخ تأیید داده‌ها: 2026-11-19 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

LT1191CN8 datasheet LT1191CN8 pinout LT1191CN8 datasheet pdf LT1191CN8 equivalent LT1191CN8 replacement LT1191CN8 price LT1191CN8 stock LT1191CN8 8-PDIP LT1191CN8 video amplifier LT1191CN8 vs LT1192CN8 Analog Devices LT1191CN8 LT1191CN8 schematic

قطعات و اصطلاحات مرتبط

Analog Devices Linear Technology LT1191CN8 LT1190CN8 LT1192CN8 LT1194CN8 LT1195CN8 LT1196CN8 LT1191CN8#PBF operational amplifier video amplifier analog integrated circuit single-channel amplifier 8-PDIP PDIP package family through-hole package surface mount gain-bandwidth product slew rate output drive signal conditioning video distribution commercial grade feedback loop
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ