MAX17633BATP+T - 36V, 3.5A Synchronous Buck Converter | Analog Devices
MPN: MAX17633BATP+T ✓ فعالMAX17633BATP+T نمای کلی
A synchronous buck converter is a type of DC-DC switching regulator that steps down a higher input voltage to a lower output voltage with high efficiency. It uses two MOSFETs (high-side and low-side) to alternately connect the inductor to the input and ground, minimizing conduction losses compared to asynchronous designs. This topology is essential in power management systems where efficiency and thermal performance are critical, such as in base stations, distributed power architectures, and point-of-load (POL) converters.
Key features of the MAX17633BATP+T include an adjustable output voltage from 0.9V, a MODE/SYNC pin for selecting PWM, PFM, or DCM control schemes, adjustable input undervoltage lockout (UVLO), adjustable soft-start, open-drain RESET output, and external clock synchronization. The switching frequency is programmable from 380kHz to 2.45MHz, allowing designers to optimize efficiency versus component size. The device also offers high efficiency across a wide load range, reducing power dissipation and enabling cooler operation.
The MAX17633BATP+T is designed for robust performance in harsh environments. It includes cycle-by-cycle current limiting, thermal shutdown, and short-circuit protection. The adjustable soft-start prevents inrush current during startup, and the open-drain RESET output provides a power-good signal for system sequencing. The device is available in a 20-WFQFN package with an exposed pad for enhanced thermal performance, and it is RoHS compliant.
Typical applications include base-station power supplies, distributed supply regulation, general-purpose point-of-load converters, high-voltage single-board systems, industrial control power supplies, and wall transformer regulation. Its wide input range and high output current make it ideal for 12V and 24V bus systems, as well as for powering FPGAs, ASICs, and processors in industrial and telecom equipment.
When designing with the MAX17633BATP+T, ensure proper PCB layout with adequate input and output capacitance, and place the inductor and feedback resistors close to the IC to minimize parasitic inductance. The exposed pad should be soldered to a large copper area for effective heat dissipation. The MODE/SYNC pin allows synchronization to an external clock to reduce EMI in multi-rail systems.
جایگزین‌های drop-in برای MAX17633BATP+T — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
MAX17633AATP+T
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
MAX17633CATP+T
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
TPS54360
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
LT8610
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
LTC3605
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
MAX17633BATP+T حداکثر مقادیر مجاز و مشخصات الکتریکی
| عملکرد | Step-Down (Buck) |
| نوع خروجی | Adjustable |
| ولتاژ خروجی - حداقل | 0.9 V |
| Output Current | 3.5 A |
| محدوده ولتاژ ورودی | 4.5 V to 36 V |
| فرکانس سوئیچینگ | 380 kHz to 2.45 MHz |
| یکسوساز سنکرون | Yes |
| Control Scheme | PWM, PFM, DCM |
| بسته‌بندی | 20-WFQFN Exposed Pad |
| نوع نصب | Surface Mount |
| محدوده دمای کاری | -40°C to +125°C |
| تعداد خروجی‌ها | 1 |
| Synchronization | External Clock |
| شروع نرم | Adjustable |
| UVLO | Adjustable |
| وضعیت RoHS | Compliant |
پیکربندی پین MAX17633BATP+T
| پین 1 | BST — Bootstrap capacitor connection for high-side MOSFET driver |
| پین 2 | IN — Input supply voltage |
| پین 3 | IN — Input supply voltage |
| پین 4 | EN — Enable input (active high) |
| پین 5 | MODE/SYNC — Control mode selection and external clock synchronization |
| پین 6 | GND — Ground |
| پین 7 | GND — Ground |
| پین 8 | FB — Feedback input for output voltage regulation |
| پین 9 | COMP — Compensation network connection |
| پین 10 | SS — Soft-start timing capacitor connection |
| پین 11 | UVLO — Adjustable input undervoltage lockout |
| پین 12 | RESET — Open-drain reset output (power-good) |
| پین 13 | GND — Ground |
| پین 14 | LX — Switching node connection to inductor |
| پین 15 | LX — Switching node connection to inductor |
| پین 16 | PGND — Power ground |
| پین 17 | PGND — Power ground |
| پین 18 | OUT — Output voltage sense |
| پین 19 | OUT — Output voltage sense |
| پین 20 | OUT — Output voltage sense |
| پین 21 | EP — Exposed pad (thermal and electrical ground) |
کاربردهای معمول
MAX17633BATP+T مناسب است برای 6 کاربردs: Base-Station Power Supplies, Distributed Supply Regulation, General-Purpose Point-of-Load, High-Voltage Single-Board Systems, Industrial Control Power Supplies, Wall Transformer Regulation.
Base-Station Power Supplies
The MAX17633BATP+T is ideal for base-station power supplies due to its wide 4.5V to 36V input range and 3.5A output capability. It efficiently steps down 24V or 48V bus voltages to lower rails for RF transceivers and digital processing. Its high efficiency reduces heat dissipation, which is critical in sealed outdoor enclosures. The adjustable output and external synchronization help minimize EMI in sensitive RF environments.
پیشنهادی
Distributed Supply Regulation
In distributed power architectures, the MAX17633BATP+T provides point-of-load regulation from intermediate bus voltages. Its high efficiency and small 20-WFQFN package allow dense board layouts. The adjustable soft-start prevents inrush current during hot-swap, and the open-drain RESET output enables proper sequencing of downstream loads. The wide input range accommodates varying bus voltages.
پیشنهادی
General-Purpose Point-of-Load
The MAX17633BATP+T is a versatile point-of-load converter for powering FPGAs, ASICs, and processors. Its 3.5A output and adjustable voltage from 0.9V make it suitable for core and I/O rails. The MODE/SYNC pin allows synchronization to a system clock, reducing noise in mixed-signal designs. High efficiency across load ranges extends battery life in portable equipment.
پیشنهادی
High-Voltage Single-Board Systems
For single-board systems powered from 24V or 36V supplies, the MAX17633BATP+T provides a robust solution. Its 36V input rating handles voltage transients, and the integrated MOSFETs simplify design. The adjustable UVLO ensures proper startup under brownout conditions. The device's thermal performance is enhanced by the exposed pad, which should be connected to a large copper area.
پیشنهادی
Industrial Control Power Supplies
In industrial control systems, the MAX17633BATP+T powers sensors, actuators, and controllers from 24V rails. Its wide input range and high efficiency reduce thermal stress in cabinets. The adjustable soft-start and RESET output enable safe power-up sequencing. The device's robust protection features, including cycle-by-cycle current limiting and thermal shutdown, ensure reliable operation in harsh environments.
پیشنهادی
Wall Transformer Regulation
The MAX17633BATP+T can regulate the output of wall transformers, providing a clean, stable supply for consumer electronics. Its wide input range accommodates transformer output variations, and the high efficiency reduces wasted power. The small package is ideal for compact adapters. The MODE/SYNC pin can be used to spread spectrum for EMI compliance.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای MAX17633BATP+T — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | MAX17633AATP+T | MAX17633CATP+T | TPS54360 | LT8610 |
|---|---|---|---|---|---|
| Package | 20-WFQFN Exposed Pad | 20-WFQFN Exposed Pad | 20-WFQFN Exposed Pad | 20-WFQFN Exposed Pad | 20-WFQFN Exposed Pad |
| Brand | Analog Devices | Analog Devices | Analog Devices | Texas Instruments | Analog Devices |
| Input Voltage Range | 4.5V to 36V | 4.5V to 36V | 4.5V to 36V | 4.5V to 60V | 3.4V to 42V |
| Output Current | 3.5A | 3.5A | 3.5A | 3.5A | 2.5A |
| Switching Frequency | 380kHz to 2.45MHz | 380kHz to 2.45MHz | 380kHz to 2.45MHz | 100kHz to 2.5MHz | 200kHz to 2.2MHz |
| Control Scheme | PWM, PFM, DCM | PWM, PFM, DCM | PWM, PFM, DCM | PWM | PWM, Burst Mode |
| Synchronous Rectification | Yes | Yes | Yes | Yes | Yes |
| External Synchronization | Yes | Yes | Yes | Yes | Yes |
تفاوت‌های کلیدی
- Wide input voltage range up to 36V (در مقابلLT8610)
- High output current of 3.5A (در مقابلLT8610)
- Flexible control schemes (PWM, PFM, DCM) (در مقابلTPS54360)
یادداشت‌های طراحی
For optimal performance, place the input capacitor (10uF) and output capacitor (22uF) as close to the IC pins as possible. Use a solid ground plane and connect the exposed pad to it with multiple vias to enhance thermal dissipation. Keep the feedback trace short and away from the switching node (LX) to avoid noise coupling.
The MAX17633BATP+T can dissipate significant power at high input-output differentials. For example, at VIN=24V, VOUT=5V, and 3.5A load, power dissipation is approximately 66.5W (assuming 90% efficiency). The 20-WFQFN package has a theta_JA of around 30°C/W, so a large copper area or heatsink is required to keep the junction temperature below 125°C. Use thermal vias under the exposed pad.
Do not operate the device above the absolute maximum input voltage of 36V. Ensure the bootstrap capacitor (BST) is placed close to the BST and LX pins. The MODE/SYNC pin should be tied to a defined logic level if not used. The soft-start capacitor value determines startup time; too small a value may cause inrush current issues.
اطلاعات انطباق
RoHS compliant per distributor data. Not AEC-Q100 qualified. Other compliance data not specified in provided sources.
