Texas Instruments

MAX232ECDW - 250kbps RS-232 Transceiver | Texas Instruments

MPN: MAX232ECDW ✓ فعال
4.5 V to 5.5 V Vdss 16-pin SOIC Package
حداقل سفارش: 1 |

MAX232ECDW نمای کلی

Texas Instruments MAX232ECDW is a dual RS-232 driver and dual receiver interface IC that supports data rates up to 250 kbps from a 4.5V to 5.5V supply. It is housed in a 16-pin SOIC package and includes IEC 61000-4-2 electrostatic-discharge protection.

A MAX232 device is a bipolar RS-232 interface transceiver that converts logic-level signals between TTL/CMOS equipment and the positive and negative voltage levels used by RS-232 links. Within the interface IC hierarchy, the MAX232 belongs to the line-driver and line-receiver family, bridging a digital controller or computer port and a physical serial communication cable.

The MAX232ECDW integrates two transmit channels and two receive channels, allowing two bidirectional RS-232 ports or one port plus additional point-to-point links to be supported by one device. Its specified operating supply range is 4.5V to 5.5V, and its maximum signaling rate is 250 kbps. IEC 61000-4-2 protection adds electrostatic-discharge resilience to a frequently touched external interface.

Internally, the device uses a charge-pump voltage generator to produce the bipolar RS-232 voltage levels required by the drivers while operating from a single low-voltage supply. The receivers convert bipolar RS-232 inputs to TTL and CMOS logic levels, with a typical receiver threshold of 1.3V according to the manufacturer datasheet. Together, the dual-channel arrangement and 250 kbps capability suit control, instrumentation, industrial communication, and legacy computer interfaces.

Typical uses include service-console connections, factory equipment interfaces, laboratory instruments, embedded serial bridges, and industrial controllers that retain an RS-232 port. The device is appropriate when a system requires full RS-232 rather than TTL logic levels, particularly for cable connections where voltage polarity, ground reference, and ESD exposure must be considered.

A robust layout should place the charge-pump capacitors and supply-decoupling capacitors close to their associated pins, while keeping protected connector-side traces away from sensitive logic. External protection and signal-conditioning components may still be needed when the connected cable is long or the port is exposed to severe industrial transients.

This page consolidates the principal electrical characteristics, package details, drop-in replacement candidates, application guidance, and design cautions engineers need when evaluating the MAX232ECDW for an RS-232 interface.

جایگزین‌های drop-in برای MAX232ECDW — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای MAX232ECDW (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Maximum Data Rate, Product Type, Interface Standard, Number of Drivers, Number of Receivers.

Texas Instruments
Maximum Data Rate: 120 kbit/s
Product Type: Dual RS-232 line driver and receiver
Number of Drivers: 2
مقایسه با MAX232ECDW →
Analog Devices
Maximum Data Rate: 120 kbps
Product Type: RS-232 line-driver and receiver transceiver
Interface Standard: EIA/TIA-232E, V.28, and V.24
مقایسه با MAX232ECDW →
Texas Instruments
Maximum Data Rate: 120 kbit/s
Product Type: Dual RS-232 line driver and receiver
مقایسه با MAX232ECDW →
Texas Instruments
Maximum Data Rate: 120 kbps
Interface Standard: TIA/EIA-232-F
Number of Drivers: 2
مقایسه با MAX232ECDW →

MAX232CWE+T

✅ جایگزین مستقیم
Analog Devices
📦 16-SOIC
RS-232 line-driver and receiver transceiver · 2 · 2 · Full duplex · 120 kbps · +5 V · EIA/TIA-232E, V.28, and V.24 · 16-pin wide SOIC (WSOIC)

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MAX232IDWR

✅ جایگزین مستقیم
📦 16-SOIC
Related MAX232-family 16-SOIC interface IC; the available comparison listing gives 0 V supply-range and 0 kbps data-rate differences, so those quantitative values still require manufacturer confirmation.

📋 جایگزین مرجع (خارج از کاتالوگ)

MAX202CDWR

✅ جایگزین مستقیم
Texas Instruments
📦 16-SOIC
Dual RS-232 line driver and receiver · 2 · 2 · 5 V · 120 kbit/s · ±9 V · ±15 kV · Serial-port connection pins, including GND

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MAX232EIDR

✅ جایگزین مستقیم
Texas Instruments
📦 16-SOIC
Dual RS-232 line driver and receiver · 2 · 2 · 5 V · 120 kbit/s · ±9 V · ±30 V · 1.0 µF

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MAX232ECDW مشخصات

Product Type Dual RS-232 driver/receiver transceiver
Number of Drivers 2 drivers
Number of Receivers 2 receivers
Interface Standard RS-232
Supply Voltage Range 4.5 V to 5.5 V
Maximum Data Rate 250 kbps
Receiver Threshold 1.3 V typical
ESD Protection Standard IEC 61000-4-2
Package Type 16-pin SOIC
Package Pin Count 16 pins
نوع نصب Surface mount
Packaging Type Tube
Transmitter Output Type RS-232 bipolar line driver
Receiver Output Type TTL/CMOS logic-level receiver
Operating Voltage 4.5 V to 5.5 V

راهنمای پیکربندی پین MAX232ECDW 16 pins

پیکربندی پین برای MAX232ECDW (پکیج 16 pins). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 16 pins برای MAX232ECDW

داده پین‌آوت تفصیلی موجود نیست برای MAX232ECDW.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MAX232ECDW مناسب است برای 6 کاربردs: Industrial Controller Serial Port, Laboratory Instrument Interface, Service and Diagnostics Port, Factory Equipment Communication, Embedded Serial Port Bridge, Legacy Computer Peripherals.

🏭

Industrial Controller Serial Port

The MAX232ECDW fits industrial controllers that retain an RS-232 port for programming, configuration, or service communications. Its two drivers and two receivers support two channel directions while operating from a conventional 4.5V to 5.5V rail, and the 250 kbps maximum rate covers many legacy equipment protocols. The 16-pin SOIC package simplifies integration with an existing controller board. IEC 61000-4-2 protection is valuable when the connector is accessible to operators, although the connector shield, cable grounding, and any required transient protection must still be engineered for the installation.

🔧

Laboratory Instrument Interface

The MAX232ECDW is suitable for laboratory instruments that communicate with a host computer through an RS-232 connection. At rates up to 250 kbps, it can support older instrument-control protocols that do not require a modern high-speed serial interface. Its receivers translate the bipolar RS-232 levels into TTL/CMOS logic, while the drivers provide the required RS-232 output levels from a single 5V-class supply. The documented 1.3V typical receiver threshold helps define the input transition region, and ESD protection reduces vulnerability at a connector exposed to operator contact.

🖥️

Service and Diagnostics Port

The MAX232ECDW can provide a service-console interface for embedded equipment that needs a simple point-to-point RS-232 link. Two transmitters and two receivers allow the design to implement a bidirectional service channel or a second diagnostic channel without using separate single-channel interface packages. Operation from 4.5V to 5.5V fits conventional embedded logic supplies, and the 250 kbps capability accommodates common legacy diagnostic baud rates. Its IEC 61000-4-2 protection is particularly relevant when technicians connect a cable directly to the product during installation or maintenance.

🏭

Factory Equipment Communication

The MAX232ECDW is appropriate for factory equipment that communicates over an established RS-232 link to a controller or data-acquisition system. The 250 kbps rate supports typical industrial serial links, while two drivers and two receivers provide flexibility for bidirectional command and telemetry paths. Its 4.5V to 5.5V operating range permits use with a regulated 5V rail in control electronics. IEC 61000-4-2 protection adds a useful layer at an accessible port, but long cable runs may require additional surge protection, filtering, and careful common-ground treatment to avoid communication errors.

⚡

Embedded Serial Port Bridge

The MAX232ECDW can serve as the physical RS-232 layer in an embedded bridge or controller that converts a low-voltage UART into a cable-compatible RS-232 signal. The internal charge-pump function produces the bipolar driver voltage from one 4.5V to 5.5V supply, avoiding a separate negative rail. Data rates up to 250 kbps cover conventional UART-based management protocols. The 16-pin SOIC package supports compact controller layouts, while ESD protection helps manage static discharge at an external connector. Firmware should use the device’s receiver threshold and system ground arrangement as part of its communication-error budget.

🖥️

Legacy Computer Peripherals

The MAX232ECDW supports legacy computer peripherals and service equipment that use an RS-232 port rather than USB or a modern differential interface. A single device provides two driver outputs and two receiver inputs, allowing a controller to retain more than one legacy serial connection. The 250 kbps maximum data rate covers many established COM-port applications, and the 4.5V to 5.5V supply range works with conventional 5V systems. When adding the IC to a modern design, verify that the host UART logic levels, connector gender, cable pinout, and software protocol remain compatible with the legacy peripheral.

What is the MAX232ECDW?
The MAX232ECDW is a Texas Instruments dual RS-232 transceiver containing two line drivers and two line receivers in a 16-pin SOIC package. According to the manufacturer datasheet, it operates from a 4.5V to 5.5V supply, converts between TTL/CMOS logic levels and bipolar RS-232 levels, and supports signaling rates up to 250 kbps.
What is the operating voltage of MAX232ECDW?
The MAX232ECDW operates from 4.5V to 5.5V. This single-supply range allows the device to use standard 5V digital system power while internally generating the positive and negative voltages required by RS-232 driver outputs. The manufacturer datasheet identifies the MAX232E as a dual driver and receiver that produces TIA/RS-232-F voltage levels from one 5V supply.
How fast is MAX232ECDW?
The MAX232ECDW supports data rates up to 250 kbps. This makes it suitable for legacy serial links operating at or below 250 kbps, including many industrial-control and instrumentation ports. Signal-rate selection should also account for the cable length, baud-rate tolerance, capacitive loading, and the receiver threshold, which the manufacturer datasheet lists as 1.3V typical.
Where can I download the MAX232ECDW datasheet PDF?
The MAX232ECDW datasheet PDF is available through the product document linked on this page. It describes the MAX232E dual driver/receiver, the 4.5V to 5.5V operating range, the 250 kbps interface capability, IEC 61000-4-2 protection, and the 16-pin SOIC connection information. Use the manufacturer pin-description and capacitor tables when assigning PCB nets.
Where can I find the MAX232ECDW pinout?
The MAX232ECDW pinout is shown in the manufacturer datasheet under the device pin-description and typical-application information. The part uses a 16-pin SOIC package, but signal names and charge-pump capacitor assignments must be taken from that table rather than inferred from another MAX232 package. Follow the pin-description table when implementing the PCB footprint and supply bypass connections.
What applications use MAX232ECDW?
The MAX232ECDW is used for legacy RS-232 connections in industrial controllers, laboratory instruments, service equipment, and embedded communication systems. Its two drivers and two receivers can implement two serial channels or combine bidirectional communication and additional point-to-point links. The 250 kbps maximum rate and 4.5V to 5.5V supply operation suit established 5V equipment interfaces.
What does IEC 61000-4-2 protection mean for MAX232ECDW?
The MAX232ECDW includes protection designed for IEC 61000-4-2 electrostatic-disuse conditions on the RS-232 interface. According to the manufacturer datasheet, this feature helps the device withstand ESD exposure encountered at externally accessible communication ports. Cable routing, grounding, connector selection, and supplementary surge protection remain important for reliable industrial operation.
Is MAX232CDW suitable for industrial equipment?
The MAX232ECDW can be used in industrial equipment that requires a 4.5V to 5.5V supply and RS-232 signaling up to 250 kbps. Its dual driver/receiver configuration reduces the number of interface chips needed for multiple ports, while the documented IEC 61000-4-2 protection supports use at accessible connectors. Validate the complete cable, grounding, and transient-protection design for the target installation.
MAX232ECDW vs MAX232IDWR - which is better?
The MAX232ECDW and MAX232IDWR are both identified in the available comparison data as related MAX232-family interface options, but the listed snippets do not establish a complete quantitative comparison. The MAX232ECDW is specifically documented as a 16-SOIC, 2-driver/2-receiver device with a 4.5V to 5.5V supply and 250 kbps operation. Confirm pinout, temperature grade, and lifecycle details in the manufacturer documentation before substitution.
When should I choose MAX232ECDW over another MAX232-family IC?
Choose the MAX232ECDW when a design needs two RS-232 drivers, two receivers, a 16-pin SOIC footprint, and operation from 4.5V to 5.5V at rates up to 250 kbps. It is particularly useful when IEC 61000-4-2 protection is desired at an exposed RS-232 connector. A different family member may be preferable when the interface needs lower voltage, automatic shutdown, higher data rates, or a different package.
Can MAX232CWE+T replace MAX232ECDW?
The MAX232CWE+T is a direct functional candidate for the MAX232ECDW because distributor technical information identifies both as 2-driver/2-receiver RS-232 transceivers in 16-SOIC packages with 4.5V to 5.5V supplies and operation up to 250 kbps. It is therefore a pin-compatible replacement candidate, subject to confirming manufacturer pin assignments, temperature range, and the qualification requirements of the finished equipment.
What is the best drop-in replacement for MAX232ECDW?
The strongest drop-in candidate identified for the MAX232ECDW is the MAX232CWE+T because its published description matches the target's 16-SOIC package, dual-driver/dual-receiver configuration, 4.5V to 5.5V supply range, and 250 kbps data-rate capability. Several related MAX232 and MAX202 options appear in comparison references, but their complete pin and parameter data must be checked before treating them as drop-in replacements.
Where can I buy MAX232ECDW and request a quote?
Use the Request a Quote form on this page to ask about MAX232ECDW availability, current unit pricing, order quantity, and lead time. The MAX232ECDW is offered in a 16-pin SOIC tube package. A quotation request is the appropriate method for obtaining a current commercial commitment rather than relying on an archived unit-price reference.
What is the lead time for MAX232ECDW?
The current lead time for MAX232ECDW should be requested through the Request a Quote form on this page. The part is identified as an orderable Texas Instruments interface IC in a 16-pin SOIC tube package, but production availability and lead time can change with market conditions. Include your required quantity, target date, and shipment destination when submitting the request.
Is MAX232ECDW in stock?
Current MAX232ECDW stock should be confirmed through the Request a Quote form on this page. The manufacturer and distributor listings identify the device as an active, orderable RS-232 transceiver in a 16-pin SOIC package, but real-time inventory is not a permanent product attribute. Submit the required quantity to obtain a current availability response for the exact MAX232ECDW ordering code.

داده‌های مرجع مهندسی برای MAX232ECDW — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the MAX232ECDW when the design requires a 4.5V to 5.5V supply, two RS-232 drivers, two receivers, operation up to 250 kbps, and a 16-pin SOIC footprint. It is especially suitable for legacy industrial, laboratory, service-console, and embedded serial interfaces that benefit from documented IEC 61000-4-2 protection. The MAX232CWE+T is a strong drop-in candidate because its listed 2/2 configuration, supply range, data rate, and package match the target. Consider MAX232IDWR when its grade and exact electrical limits are confirmed against the finished equipment. Evaluate MAX202CDWR and MAX232EIDR only after checking their manufacturer data for channel count, temperature grade, shutdown behavior, and pin functions. None of these related-family choices should replace the MAX232ECDW solely from family similarity; verify the complete pinout and operating limits before approving a substitution.

مقایسه با جایگزین‌ها

پارامتر این محصول MAX232CWE+T MAX232IDWR MAX202CDWR MAX232EIDR
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Interface Type Full RS-232 RS-232 RS-232 RS-232 RS-232

تفاوت‌های کلیدی

  • Documented protection for externally accessible RS-232 ports (در مقابلMAX232CWE+T)
  • Matches the core operating requirements of a direct replacement candidate (در مقابلMAX232CWE+T)
  • Combines two full RS-232 channels in a 16-pin package (در مقابلMAX202CDWR)

یادداشت‌های طراحی

Place all charge-pump capacitors and supply bypass components directly beside their associated MAX232ECDW pins, with short and low-loop-area connections. Keep the connector-side driver and receiver traces away from sensitive logic and clocks wherever possible. The exposed connector region should also be arranged to limit electrostatic discharge from entering the logic side of the board.

Do not treat the RS-232 ground as an optional signal wire. Maintain a common reference between the transceiver board and the connected equipment, especially across long or industrial cables. Also verify connector pin assignments and signal polarity before assembly because an incorrect RS-232 cable connection can defeat otherwise correct logic design.

The MAX232ECDW’s charge-pump circuitry can produce harmonics on the 5V supply. Use the manufacturer-specified local bypass capacitance and keep the charge-pump loop compact to limit coupling into adjacent analog or digital circuits. If the RS-232 port shares a board with sensitive measurement circuitry, monitor supply ripple and place the transceiver near the connector to shorten external routes.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

IEC 61000-4-2 ESD protection is documented for the MAX232ECDW. Separate material-compliance declarations were not established from the referenced manufacturer or distributor information.

تاریخ تأیید داده‌ها: 2026-11-17 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

MAX232ECDW datasheet MAX232ECDW datasheet pdf MAX232ECDW pinout MAX232ECDW specifications MAX232ECDW equivalent MAX232ECDW replacement MAX232ECDW cross reference MAX232ECDW vs MAX232CWE+T MAX232ECDW 16-SOIC footprint MAX232ECDW application circuit MAX232ECDW price MAX232ECDW stock Texas Instruments MAX232ECDW

قطعات و اصطلاحات مرتبط

Texas Instruments MAX232ECDW MAX232CWE+T MAX232IDWR MAX202CDWR MAX232EIDR RS-232 RS-232 transceiver line driver line receiver interface IC semiconductor TTL CMOS IEC 61000-4-2 electrostatic-discharge protection charge-pump voltage generator SOIC-16 surface-mount package 250 kbps data rate 4.5V to 5.5V supply industrial communication laboratory instrumentation legacy serial interface
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ