Analog Devices

MAX318CPA+ - 35 Ohm SPST CMOS Analog Switch | Analog Devices

MPN: MAX318CPA+ ✓ فعال
4.5 V to 20 V Vdss 35 ohms maximum Rds(on) 8-pin PDIP Package
حداقل سفارش: 1 |

MAX318CPA+ نمای کلی

The Analog Devices MAX318CPA+ is a precision, normally open, single-pole single-throw CMOS analog switch with an on-resistance of 35 ohms, housed in an 8-pin PDIP package. It routes one analog signal using a 1:1 SPST topology and is designed for precision signal-selection and test systems.

An analog switch is a semiconductor interface device that connects or disconnects an analog signal path under digital control. The MAX318CPA+ belongs to the analog switch hierarchy within interface ICs and multiplexers, providing a simpler alternative to a multi-channel multiplexer when only one signal path must be selected. Its normally open configuration keeps the switched node disconnected until the control input activates the path.

Key characteristics include a maximum on-resistance of 35 ohms, operation from 4.5 V to 20 V, and normally open SPST behavior. The device is specified as a precision CMOS analog switch with low on-resistance that remains substantially flat across the analog signal range. According to the Analog Devices MAX318 product page, on-resistance is guaranteed below 35 ohms and is matched within 2 ohms between channels in the associated precision-switch family.

The MAX318CPA+ is intended for precision instrumentation, signal routing, test and measurement equipment, industrial control interfaces, and data acquisition systems. Its single-channel architecture simplifies control logic while preserving the low resistance required to transfer low-level or precision analog signals. The 8-pin PDIP package also supports conventional through-hole assembly and prototype boards where fine-pitch surface-mount routing would be inconvenient.

Designers should verify the control logic, supply voltage, allowable signal voltage, and switching transients against the manufacturer data sheet before use. Because an analog switch can introduce small resistance variation, channel resistance matching, charge injection, off leakage, and bandwidth determine whether it is suitable for a particular signal path. Input and output protection may also be required when external voltages exceed the device ratings.

This page combines the manufacturer specifications, verified sourcing links, application guidance, comparison information, and practical design notes to support component selection and PCB implementation. The MAX318CPA+ is best suited to designers who need a simple, normally open, precision SPST switch rather than a multi-channel multiplexer.

جایگزین‌های drop-in برای MAX318CPA+ — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

MAX318MJA

✅ جایگزین مستقیم
📦 8-pin PDIP
Same MAX318 normally open SPST function and 35 ohm maximum on-resistance; ordering suffix differs, so environmental qualification must be verified

📋 جایگزین مرجع (خارج از کاتالوگ)

MAX318EPA+

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-pin PDIP
Same MAX318 normally open SPST function and 35 ohm maximum on-resistance; EPA+ ordering suffix indicates a distinct temperature or qualification option

📋 جایگزین مرجع (خارج از کاتالوگ)

MAX318CPA+ حداکثر مقادیر مجاز و مشخصات الکتریکی

Switch Type SPST, normally open
Number of Channels 1 channel
On-Resistance 35 ohms maximum
On-Resistance Matching Within 2 ohms between channels in the MAX317/MAX318/MAX319 family
On-Resistance Variation Over Analog Signal Range 3 ohms maximum
Supply Voltage Range 4.5 V to 20 V
Switch Configuration 1:1
Technology CMOS
بسته‌بندی 8-pin PDIP
تعداد پایه 8 pins
نوع نصب Through-hole

راهنمای پیکربندی پین MAX318CPA+ 8-pin pdip

پیکربندی پین برای MAX318CPA+ (پکیج 8-pin pdip). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 8-pin pdip برای MAX318CPA+

داده پین‌آوت تفصیلی موجود نیست برای MAX318CPA+.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MAX318CPA+ مناسب است برای 6 کاربردs: Precision Instrumentation Signal Routing, Test and Measurement Systems, Industrial Control Signal Isolation, Data Acquisition Modules, Laboratory Equipment, Battery-Powered Portable Instruments.

🔧

Precision Instrumentation Signal Routing

The MAX318CPA+ suits precision measurement front ends that must connect one analog source to an instrument or converter. Its normally open SPST configuration avoids leaving the selected node unintentionally connected, while the maximum on-resistance of 35 ohms provides a defined insertion resistance for the signal path. According to the Analog Devices MAX318 family information, precision switches maintain channel matching within 2 ohms and on-resistance variation within 3 ohms across the analog range. These characteristics help control measurement error when source impedance is low. The designer should still calculate the total signal-path impedance, confirm the allowable input swing, and verify settling behavior for the selected bandwidth before finalizing the interface.

⚡

Test and Measurement Systems

The MAX318CPA+ can serve as a compact signal-selection element in test equipment that routes a source, reference, or calibration node into a measurement chain. The one-channel, normally open SPST arrangement is useful when the test path must remain isolated until commanded. Its 35 ohm maximum on-resistance must be included in the input impedance of the downstream instrument, particularly for high-impedance sensor interfaces. The manufacturer identifies the MAX318 family as low-resistance precision CMOS switches, with matching and variation guarantees relevant to repeatable measurements. For automated test equipment, check control timing, charge injection, off leakage, and the maximum signal excursion before assigning the switch to a sensitive input.

🏭

Industrial Control Signal Isolation

The MAX318CPA+ is appropriate for industrial interfaces that temporarily connect a sensor or control node to an analog processing circuit. Its normally open state provides a default disconnected path, which can prevent unwanted interaction between external circuitry and a protected measurement channel. The 35 ohm maximum on-resistance should be checked against the sensor output impedance and the input impedance of the receiving circuit. Because industrial signals can exceed the device supply voltage or switch thresholds, external protection and clamping may be necessary. The Analog Devices MAX318 documentation remains the controlling reference for allowable signal voltages and control levels. Firmware and hardware designers should also ensure that fault states cannot place an uncontrolled voltage on the selected node.

🖥️

Data Acquisition Modules

A MAX318CPA+ can connect a selected source into a data-acquisition channel when a single switched analog input is sufficient. The 4.5 V to 20 V operating range accommodates conventional analog supply rails, and the 35 ohm maximum on-resistance is generally easier to manage than the contribution of a long cable or high-impedance sensor. Engineers should evaluate the complete acquisition path because switch resistance, leakage, settling time, and protection-network leakage all contribute to acquisition error. The normally open function also supports circuits where a source should be connected only during a measurement window. Use the manufacturer data sheet to confirm the signal range and switching behavior, then place the device close enough to the acquisition input to minimize induced pickup and PCB leakage effects.

🧪

Laboratory Equipment

The MAX318CPA+ is well matched to laboratory equipment that uses removable or selectable analog inputs, including calibration and reference-routing arrangements. The through-hole 8-pin PDIP package is convenient for prototypes, instrument modules, and manually assembled boards. Because the switch is normally open, it can isolate an external input until the instrument establishes a defined connection. Designers should assess connector transients, grounding, and leakage from adjacent laboratory circuitry; the 35 ohm maximum on-resistance must also be included in the probe and input network. The Analog Devices family specifications establish low on-resistance and controlled matching, while exact bandwidth, leakage, and switching limits should be taken from the MAX318 data sheet for the final operating conditions.

📱

Battery-Powered Portable Instruments

The MAX318CPA+ can be used in a portable measurement instrument when the design requires a low-component-count analog routing switch and can operate from a 4.5 V or higher supply. The normally open configuration reduces unintended signal-path loading, while the specified 35 ohm maximum on-resistance provides a known upper bound for path-loss calculations. Low-power designs must still verify supply current and static dissipation under the operating state because those figures are not established by the distributor summary. Protection against connector transients and electrostatic discharge is particularly important in portable equipment. Keep the analog traces short, maintain a stable ground reference, and consult the manufacturer data sheet for control thresholds, leakage, and allowable external signal excursions.

خلاصه محصولات پیشنهادی

TS972IQT STMicroelectronics استفاده‌شده در: Precision Instrumentation Signal Routing TS952IPT STMicroelectronics استفاده‌شده در: Precision Instrumentation Signal Routing DG419DY+ Analog Devices استفاده‌شده در: Test and Measurement Systems TS924IPT STMicroelectronics استفاده‌شده در: Test and Measurement Systems TS951IDT STMicroelectronics استفاده‌شده در: Industrial Control Signal Isolation MC74F243M onsemi استفاده‌شده در: Industrial Control Signal Isolation TS942AID STMicroelectronics استفاده‌شده در: Data Acquisition Modules DG444DJ+ Analog Devices استفاده‌شده در: Data Acquisition Modules TS934IT Instrumentation amplifier for precision laboratory input channels استفاده‌شده در: Laboratory Equipment TS514IDT Precision op-amp for active input conditioning استفاده‌شده در: Laboratory Equipment TS930IDT Low-offset amplifier for portable precision measurements استفاده‌شده در: Battery-Powered Portable Instruments TS912IDT General-purpose op-amp for portable analog conditioning استفاده‌شده در: Battery-Powered Portable Instruments
What is the MAX318CPA+?
The MAX318CPA+ is a precision, normally open, single-pole single-throw CMOS analog switch with a maximum on-resistance of 35 ohms. According to the Analog Devices MAX318 product page, the MAX318 family uses a 1:1 switching topology and is intended for precision signal routing. The device operates from 4.5 V to 20 V and is offered in an 8-pin PDIP package.
What are the key specifications of MAX318CPA+ that engineers should know?
The MAX318CPA+ is a one-channel, normally open SPST CMOS analog switch rated for a maximum on-resistance of 35 ohms and a supply range of 4.5 V to 20 V. According to the Analog Devices MAX318 documentation, the associated precision-switch family guarantees on-resistance matching within 2 ohms and variation of no more than 3 ohms across the analog signal range. Its 8-pin PDIP package supports through-hole assembly.
Where can I download the MAX318CPA+ datasheet PDF?
The official MAX318 documentation is available through the Analog Devices product page at https://www.analog.com/en/products/max318.html. That page links the MAX318 data sheet, product selection table, and supporting documents. The MAX318CPA+ is the 8-pin PDIP member of the precision, normally open SPST switch family described in the manufacturer documentation.
Where can I find the MAX318CPA+ pinout?
Use the pin-description table and package drawing in the Analog Devices MAX318 data sheet for the authoritative MAX318CPA+ pin assignment. The verified product information identifies an 8-pin PDIP package but does not reproduce the individual terminal names, so a complete numbered pin list should not be inferred from a distributor summary. The 8-pin PDIP footprint corresponds to the dip-8 package drawing.
What is the on-resistance of MAX318CPA+?
The MAX318CPA+ has a maximum on-resistance of 35 ohms in its closed state. According to the Analog Devices MAX318 product page, the MAX317, MAX318, and MAX319 precision CMOS switches are guaranteed to remain below 35 ohms. The documented precision-switch family also maintains channel matching within 2 ohms and limits on-resistance variation across the analog signal range to 3 ohms.
What supply voltage does MAX318CPA+ require?
The MAX318CPA+ operates from 4.5 V to 20 V. The manufacturer listing identifies the device as a precision CMOS analog switch with a 4.5 V minimum and 20 V maximum supply voltage. Confirm the control-pin thresholds and allowable input or output signal excursion against the MAX318 data sheet before applying a logic signal.
Is MAX318CPA+ normally open or normally closed?
The MAX318CPA+ is normally open, meaning the switched path is disconnected in its inactive state. This differentiates it from the normally closed MAX317 and the SPDT MAX319 in the same precision CMOS family. The Analog Devices product page identifies MAX318 as the normally open SPST option for one-channel signal routing.
MAX318CPA+ vs MAX318MJA - which is better for a new design?
The MAX318CPA+ is the general-purpose 8-pin PDIP ordering option, while MAX318MJA is identified as a separate ordering variant. For a new commercial or industrial design, MAX318CPA+ is generally easier to source through standard catalog channels, although current availability should be confirmed before layout release. Compare temperature grade, package marking, and lifecycle status in the manufacturer documentation for the exact variant.
When should I choose MAX318CPA+ over a multi-channel analog multiplexer?
Choose the MAX318CPA+ when the design requires only one normally open analog connection and a simple control interface. A multi-channel multiplexer is preferable when several signal paths must be selected from a common source, because the MAX318CPA+ provides only one SPST path. The MAX318CPA+ is also appropriate when its 35 ohm maximum on-resistance satisfies the signal-path impedance requirement.
Is MAX318CPA+ suitable for precision test and measurement systems?
The MAX318CPA+ is suitable for precision test and measurement signal routing when its electrical limits satisfy the application. Its maximum on-resistance of 35 ohms, channel matching within 2 ohms in the associated family, and limited variation across the signal range support controlled analog paths. Confirm bandwidth, charge injection, leakage, and allowed signal swing in the manufacturer data sheet.
What can replace MAX318CPA+?
The closest documented family replacement is MAX318MJA, which retains the MAX318 precision, normally open SPST function but uses a different ordering suffix that may denote different qualification or environmental requirements. A substitute should be accepted only after its 8-pin PDIP pinout, 4.5 V to 20 V supply range, normally open behavior, and maximum 35 ohm on-resistance are verified against the manufacturer data sheet.
Can MAX318MJA replace MAX318CPA+ on the same PCB?
MAX318MJA may be considered as a replacement candidate because it belongs to the same MAX318 precision-switch family, but it should not be treated as automatically interchangeable. The 8-pin PDIP pin assignment, normally open configuration, electrical limits, environmental grade, and lifecycle status must match the assembly requirements. Confirm all of those details in the Analog Devices documentation before substitution.
Where can I buy MAX318CPA+ online?
Use the Request a Quote form on this page to request MAX318CPA+ pricing, current stock, and lead time. The Analog Devices product page identifies the MAX318 as a production precision SPST CMOS analog switch, while authorized distribution records are listed in the sourcing links. XAIPART can confirm the exact suffix, package, and delivery schedule before an order is placed.
What is the price of MAX318CPA+?
Current pricing for MAX318CPA+ should be obtained through the Request a Quote form on this page because distributor records may change with quantity and inventory. The available manufacturer page shows family-level starting information, but it does not present a complete quantity-break table for the exact MAX318CPA+ suffix. The quote form should therefore be used for the order quantity and delivery requirements.
Is MAX318CPA+ in stock and what is its lead time?
The current stock position and lead time for MAX318CPA+ should be confirmed through the Request a Quote form on this page. The Analog Devices MAX318 family is listed as production, but that status does not guarantee inventory for every package suffix or order quantity. Provide the required quantity and target delivery date when requesting the quotation.
Does MAX318CPA+ meet RoHS and AEC-Q100 requirements?
The RoHS, REACH, AEC-Q100, lead-free, and halogen-free classifications for MAX318CPA+ must be confirmed from the current manufacturer product documentation or a supplier declaration for the exact ordering suffix. These compliance claims are not established by the distributor descriptions alone. For an automotive design, specifically verify AEC-Q100 qualification rather than assuming it from the precision-switch family designation.

داده‌های مرجع مهندسی برای MAX318CPA+ — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose MAX318CPA+ when the board needs one normally open analog connection, a maximum on-resistance of 35 ohms, and an 8-pin PDIP footprint. It is particularly suitable for precision instruments, test systems, industrial analog interfaces, and prototypes where a single switched path is sufficient. MAX318MJA is the closest documented catalog candidate, but verify its exact temperature qualification, lifecycle status, and terminal assignments before treating it as interchangeable. MAX318EPA+ is a same-family extended-ordering option that should be selected when its documented environmental grade matches the requirement. Neither a multi-channel multiplexer nor the normally closed MAX317 should replace the part without changing the system architecture or default switch state.

مقایسه با جایگزین‌ها

پارامتر این محصول MAX318MJA MAX318EPA+
Package 8-pin PDIP 8-pin PDIP 8-pin PDIP
Brand Analog Devices Analog Devices Analog Devices
Switch Type SPST, normally open SPST, normally open SPST, normally open
Number of Channels 1 channel 1 channel 1 channel
On-Resistance 35 ohms maximum 35 ohms maximum 35 ohms maximum
Supply Voltage Range 4.5 V to 20 V 4.5 V to 20 V 4.5 V to 20 V
Technology CMOS CMOS CMOS
On-Resistance Matching Within 2 ohms between channels in the associated precision-switch family Within 2 ohms between channels in the associated precision-switch family Within 2 ohms between channels in the associated precision-switch family
On-Resistance Variation 3 ohms maximum across the analog signal range 3 ohms maximum across the analog signal range 3 ohms maximum across the analog signal range

تفاوت‌های کلیدی

  • Single-channel normally open precision switch (در مقابلMAX318MJA)
  • No multi-channel switching complexity (در مقابلMAX318MJA)
  • Defined insertion resistance for precision paths (در مقابلMAX318EPA+)

یادداشت‌های طراحی

Include the maximum 35 ohm on-resistance in the complete source impedance calculation rather than treating the switch as ideal. The 2 ohm family matching and 3 ohm signal-range variation are important when comparing channels or measuring small differential signals. For high-impedance sources, verify leakage, capacitance, bandwidth, and settling time from the manufacturer data sheet because the 35 ohm figure alone does not determine accuracy.

Route the analog input and output as short traces with a continuous ground reference, and keep switching-control traces away from sensitive analog nets. The through-hole PDIP package is mechanically simple, but long leads can increase inductance, capacitance, and pickup. If the switch handles fast signals, use a ground plane, minimize loop area, and provide local supply bypassing close to the device.

Operate the MAX318CPA+ only within its 4.5 V to 20 V supply range and confirm that control thresholds are compatible with the driving logic. External signals must also remain inside the allowable input or output voltage window. Add series resistance, clamps, or other protection when connector transients or powered external nodes could exceed those limits; protection components can add leakage that must be included in the measurement budget.

Do not substitute the normally closed MAX317 or the SPDT MAX319 solely because they use the same precision-switch family. The MAX318CPA+ is normally open, so the control logic and default switch state differ. Also verify that any proposed alternative has the same 8-pin PDIP terminal assignments and electrical limits rather than relying on the package outline alone.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

Compliance status requires confirmation from the current Analog Devices product documentation or an applicable supplier declaration for the exact ordering suffix.

تاریخ تأیید داده‌ها: 2026-11-09 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

MAX318CPA+ datasheet MAX318CPA+ pinout MAX318CPA+ datasheet pdf MAX318CPA+ equivalent MAX318CPA+ replacement MAX318CPA+ 35 ohm MAX318CPA+ SPST switch MAX318CPA+ 8-pin PDIP MAX318CPA+ vs MAX318MJA MAX318CPA+ price MAX318CPA+ stock Analog Devices MAX318CPA+

قطعات و اصطلاحات مرتبط

Analog Devices MAX318CPA+ MAX318MJA MAX318EPA+ MAX318 precision CMOS analog switch analog switch SPST normally open switch single-pole single-throw interface IC multiplexer on-resistance 4.5 V to 20 V supply 8-pin PDIP DIP package family through-hole assembly precision instrumentation test and measurement data acquisition industrial control signal routing RoHS REACH AEC-Q100
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ