Texas Instruments

MAX3232IDWRG4 - Dual RS-232 Transceiver | Texas Instruments

MPN: MAX3232IDWRG4 ✓ فعال
3 V to 5.5 V Vdss 16-pin SOIC (DW) Package
حداقل سفارش: 1 |

MAX3232IDWRG4 نمای کلی

Texas Instruments MAX3232IDWRG4 is a dual-channel RS-232 line driver and receiver operating from a 3 V to 5.5 V supply, with a maximum data rate of 250 kbps and ±15 kV ESD protection on each I/O pin. The device is packaged in a 16-pin SOIC (DW) package and is specified for an industrial temperature range of -40°C to +85°C.

An RS-232 transceiver is an interface IC that converts low-voltage logic signals into RS-232 line levels and receives differential bipolar signals, converting them back into CMOS-compatible logic levels. This dual-driver, dual-receiver arrangement places the MAX3232IDWRG4 within the hierarchy of interface ICs, serial transceivers, line drivers and receivers, and data-conversion semiconductors. It is used where a powered system must exchange data with an RS-232 equipment port.

The principal features include two transmit channels, two receive channels, operation from a single 3 V to 5.5 V supply, data rates up to 250 kbps, and ±15 kV ESD protection. The industrial-temperature rating supports equipment operating across extended ambient conditions. These characteristics make the device suitable for industrial controls, test equipment, POS terminals, and embedded systems that communicate with legacy RS-232 peripherals.

The MAX3232 interface architecture uses on-chip level-shifting circuitry to produce the positive and negative voltage swings required by RS-232 while operating from a modern low-voltage supply. Because RS-232 is a point-to-point interface, each transmitter should drive one receiver and the connection should include signal-ground continuity. The 250 kbps capability supports legacy control and diagnostic protocols without requiring a separate line-driver IC.

Typical applications include industrial serial controllers, laboratory test systems, point-of-sale equipment, barcode scanners, and service-console interfaces. In each case, the IC handles the physical RS-232 voltage conversion while the host UART handles framing, parity, and data-rate configuration. The device can therefore simplify board partitioning by combining the driver and receiver functions in one package.

PCB implementation should preserve the required charge-pump capacitors, route each RS-232 line away from sensitive analog signals, and provide a low-impedance ground path between the two connected systems. Confirm the external capacitor values, pin assignments, and maximum driver-load requirements against the manufacturer datasheet before releasing a new layout. The device is a digital interface IC, so a safe operating area curve is not applicable.

This product record combines the manufacturer’s electrical and package specifications, sourcing guidance, practical layout considerations, and same-footprint replacement information. It is intended to help engineers evaluate the MAX3232IDWRG4 for new designs, cross-reference legacy RS-232 interfaces, and plan industrial-temperature production boards.

جایگزین‌های drop-in برای MAX3232IDWRG4 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای MAX3232IDWRG4 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در ESD Protection, Package, Product Type.

Texas Instruments
ESD Protection: ±15 kV IEC pin-to-pin
Package: 16-pin SOIC
Product Type: RS-232 line-driver and receiver transceiver
مقایسه با MAX3232IDWRG4 →

MAX3232EIDWRG4

✅ جایگزین مستقیم
📦 16-pin SOIC (DW)
Same 16-pin DW footprint; the MAX3232E is an improved direct replacement, with electrical and temperature limits still requiring suffix-specific verification

📋 جایگزین مرجع (خارج از کاتالوگ)

MAX3232ECDW

✅ جایگزین مستقیم
Texas Instruments
📦 16-pin SOIC (DW)
RS-232 line-driver and receiver transceiver · 3 V to 5.5 V · 2 · 2 · RS-232 · TIA/EIA-232-F · ±15 kV IEC pin-to-pin · Integrated dual charge pump

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MAX3232IDWRG4 مشخصات

Product Type Dual RS-232 line driver/receiver
Number of Transmit Channels 2 channels
Number of Receive Channels 2 channels
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
ESD Protection ±15 kV
محدوده دمای کاری -40°C to +85°C
بسته‌بندی 16-pin SOIC (DW)
Package Code DW
Terminal Count 16 pins
نوع نصب Surface mount
Interface Standard RS-232

راهنمای پیکربندی پین MAX3232IDWRG4 dw

پیکربندی پین برای MAX3232IDWRG4 (پکیج dw). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج dw برای MAX3232IDWRG4

داده پین‌آوت تفصیلی موجود نیست برای MAX3232IDWRG4.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MAX3232IDWRG4 مناسب است برای 6 کاربردs: Industrial Serial Control Interface, Point-of-Sale Terminal Interface, Barcode Scanner and Reader Integration, Laboratory Test and Measurement Equipment, Embedded Service and Configuration Console, Building and Automation Controller.

🏭

Industrial Serial Control Interface

The MAX3232IDWRG4 is well suited to industrial controllers that must communicate with legacy RS-232 equipment over a point-to-point cable. Its 3 V to 5.5 V operating range permits connection to 3.3 V or 5 V control electronics, while the two transmitter and two receiver channels support bidirectional console or service links. The industrial -40°C to +85°C rating supports controlled machinery and factory equipment. A practical design places the transceiver beside the DB9 or equivalent connector, uses the manufacturer-recommended charge-pump capacitors, and routes each signal away from switching and analog circuitry.

🖥️

Point-of-Sale Terminal Interface

A point-of-sale terminal can use the MAX3232IDWRG4 to bridge its host UART to an RS-232 peripheral such as a scanner, printer, or customer display. The integrated dual-driver and dual-receiver arrangement reduces the number of separate interface components on the board, while the 250 kbps rate covers common serial-control protocols. Operating from 3.3 V or 5 V also supports two prevalent embedded-compute supply rails. The implementation should preserve point-to-point RS-232 topology, provide signal-ground continuity, and place protection or filtering close to the external connector.

📷

Barcode Scanner and Reader Integration

The MAX3232IDWRG4 can interface an RS-232 barcode scanner with an embedded controller while leaving the controller UART free to exchange commands and decoded data. Its two receive channels allow one port to monitor two compatible devices, although each RS-232 transmitter should have only one receiver because the interface is point-to-point. The 3 V to 5.5 V supply range supports embedded logic rails, and ±15 kV ESD protection adds useful margin on externally connected scanner cables. Correct connector grounding and controlled cable routing remain essential for reliable operation.

🔧

Laboratory Test and Measurement Equipment

RS-232 remains common on laboratory instruments for remote commands, measurement transfer, and diagnostic functions. The MAX3232IDWRG4 provides two 250 kbps channels in a compact 16-pin SOIC package, allowing a test instrument to expose a legacy serial port without requiring a separate driver and receiver. Its -40°C to +85°C operating range supports controlled test environments. Engineers should use the manufacturer application circuit for charge-pump capacitance and verify line-driver loading, cable length, and grounding under the expected instrument configuration.

🧩

Embedded Service and Configuration Console

The MAX3232IDWRG4 is suitable for embedded systems that expose a service port for configuration, firmware download, or diagnostic logs. A 3.3 V or 5 V system can operate the transceiver directly, and the two receive channels can support one primary data link plus a hardware-status input where the RS-232 levels are compatible. The 250 kbps maximum data rate accommodates many low-bandwidth service protocols. The board design should isolate the external serial connector from sensitive circuitry, use a defined chassis or signal ground, and include the required charge-pump capacitors close to the device.

🏗️

Building and Automation Controller

Building automation controllers can use the MAX3232IDWRG4 to connect service tools, sensors, or access-control equipment that retains an RS-232 interface. The dual-channel architecture supports paired transmit and receive paths, while the 3 V to 5.5 V supply range fits common embedded control platforms. Its extended -40°C to +85°C range is useful in equipment rooms and industrial enclosures, although local self-heating must remain within the device rating. A robust implementation should use twisted-pair wiring where applicable, retain ground continuity, and follow the manufacturer’s recommended PCB layout for the charge-pump network.

What are the key specifications of MAX3232IDWRG4 that engineers should know?
The MAX3232IDWRG4 is a dual RS-232 transceiver with two transmitters, two receivers, a 3 V to 5.5 V supply range, and a maximum data rate of 250 kbps. It also provides ±15 kV ESD protection and operates from -40°C to +85°C. According to the Texas Instruments product page, the device is offered in a 16-pin SOIC (DW) package, making its core electrical and mechanical constraints suitable for direct review during interface-circuit design.
What is MAX3232IDWRG4 and what does an RS-232 transceiver do?
The MAX3232IDWRG4 is a dual-channel RS-232 line driver and receiver that converts between low-voltage digital logic and bipolar RS-232 signals. Texas Instruments describes it as a 3 V to 5.5 V, 250 kbps dual line driver/receiver. Its two transmitter channels generate the positive and negative line voltages expected by RS-232, while its two receiver channels convert incoming RS-232 levels into logic-compatible signals for a UART or other controller.
What is the operating voltage of MAX3232IDWRG4?
The MAX3232IDWRG4 operates from a 3 V to 5.5 V supply, according to the Texas Instruments product page. This allows it to be powered directly by common 3.3 V or 5 V system rails. Check the manufacturer datasheet for the complete operating limits, decoupling requirements, and supply-current behavior before finalizing the power architecture, particularly when the two RS-232 transmitters operate at maximum line rate.
How fast can MAX3232IDWRG4 transmit RS-232 data?
The MAX3232IDWRG4 supports data rates up to 250 kbps. Texas Instruments specifies the part as a dual-channel 250 kbps RS-232 line driver/receiver, making it suitable for moderate-speed control, diagnostic, and instrumentation links. The UART must be configured for the same baud rate and framing used by the connected equipment. Cabling, loading, grounding, and the external charge-pump network also affect reliable field operation.
Does MAX3232IDWRG4 include ESD protection?
Yes. The MAX3232IDWRG4 includes ±15 kV ESD protection on its external I/O connections, as specified by Texas Instruments. This rating improves resistance to electrostatic discharge on cables that may connect to exposed equipment ports. It does not eliminate the need for sensible system design: route protected lines away from sensitive circuitry, maintain proper grounding, and use suitable external connectors and enclosure practices for the installation environment.
Where can I download the MAX3232IDWRG4 datasheet PDF?
The official MAX3232IDWRG4 datasheet is available through the Texas Instruments product page linked in the datasheet field on this page. The manufacturer page identifies the part as a 3 V to 5.5 V, 250 kbps, dual RS-232 line driver/receiver with ±15 kV ESD protection in a 16-pin SOIC package. Use the manufacturer document for the authoritative pin list, capacitor recommendations, electrical limits, and application circuit.
Where can I find the MAX3232IDWRG4 pinout?
The MAX3232IDWRG4 pin assignment is documented in the Texas Instruments manufacturer datasheet. The device is a 16-pin SOIC (DW), but the complete numbered pin descriptions should be assigned directly from the manufacturer pin diagram rather than inferred from generic RS-232 transceivers. In particular, verify the charge-pump capacitor connections, driver outputs, receiver inputs, ground, and supply pins before assigning PCB nets or creating a footprint-compatible assembly drawing.
What is the best drop-in replacement for MAX3232IDWRG4?
The MAX3232EIDWRG4 is the closest same-brand drop-in candidate because Texas Instruments identifies the MAX3232E as an improved direct drop-in replacement for the MAX3232. The MAX3232ECDW is another same-family candidate in a 16-pin SOIC package, but its exact ordering characteristics should be checked before substitution. Neither candidate changes the PCB footprint requirement: each must use the same 16-pin DW package and compatible pin functions.
Can MAX3232EIDWRG4 replace MAX3232IDWRG4?
Yes, MAX3232EIDWRG4 can serve as a direct drop-in replacement for MAX3232IDWRG4 according to the Texas Instruments product comparison, which identifies the MAX3232E as an improved direct drop-in replacement for the MAX3232. The package remains a 16-pin SOIC DW configuration. Review the complete ordering table and electrical characteristics before release, particularly operating temperature, supply range, data rate, and charge-pump capacitor requirements.
Is MAX3232IDWRG4 the same as MAX3232ECDW?
The MAX3232IDWRG4 and MAX3232ECDW are related Texas Instruments RS-232 transceivers in 16-pin SOIC packages, but they should not be treated as identical ordering codes without checking the manufacturer comparison table. The target part is specified for 3 V to 5.5 V operation, up to 250 kbps, ±15 kV ESD protection, and -40°C to +85°C operation. Confirm the suffix-specific temperature grade and electrical limits before using the ECDW as a replacement.
When should I choose MAX3232IDWRG4 over MAX3232EIDWRG4?
Choose MAX3232IDWRG4 when an existing design is specified around the original MAX3232 and its qualified component configuration must remain unchanged. Choose MAX3232EIDWRG4 when a new design can benefit from the manufacturer’s improved MAX3232E replacement. Both use the 16-pin SOIC DW format, but the final choice should follow a complete review of electrical limits, qualification requirements, lifecycle status, and the exact manufacturer ordering table.
Is MAX3232IDWRG4 suitable for industrial equipment?
The MAX3232IDWRG4 is suitable for industrial-temperature equipment because its specified operating range is -40°C to +85°C. It combines two RS-232 transmit channels, two receive channels, 3 V to 5.5 V operation, 250 kbps performance, and ±15 kV ESD protection. The device still requires correct charge-pump capacitors, grounding, line routing, and connector implementation to preserve signal and ESD performance in the finished product.
Where can I buy MAX3232IDWRG4 online?
Use the Request a Quote form on this page to request MAX3232IDWRG4 pricing, current inventory, order quantities, and delivery information. The request should include the exact MPN MAX3232IDWRG4 and the required package or packing format. Because component availability and commercial terms can change, obtain a current quotation before committing the part to a production schedule.
What is the price of MAX3232IDWRG4?
The current price of MAX3232IDWRG4 should be requested through the Request a Quote form on this page. Provide the exact MPN, desired quantity, and shipment destination so the commercial response reflects the correct configuration. The structured price table is intentionally not reproduced in the technical content because pricing and inventory can change frequently and should be confirmed at the time of quotation.
What is the lead time for MAX3232IDWRG4?
The current lead time for MAX3232IDWRG4 should be confirmed through the Request a Quote form on this page. Include the required order quantity, target ship date, and any acceptable alternate packaging details in the request. For production planning, also verify the manufacturer lifecycle status at quotation time because availability and scheduling are controlled by current manufacturing and supply-chain conditions.

داده‌های مرجع مهندسی برای MAX3232IDWRG4 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose MAX3232IDWRG4 when maintaining an existing design qualified around the original MAX3232, especially for industrial -40°C to +85°C systems requiring 250 kbps RS-232 communication and ±15 kV ESD protection. Its 3 V to 5.5 V supply range supports both 3.3 V and 5 V embedded systems. Choose MAX3232EIDWRG4 for a new design when you want the manufacturer-identified improved direct replacement while retaining the 16-pin DW footprint. Consider MAX3232ECDW only after checking its suffix-specific temperature grade, qualification, electrical limits, and lifecycle status. Neither alternative should be released merely because its package matches; verify the numbered pin functions, charge-pump capacitor network, ESD rating, receiver thresholds, and driver-load requirements against the manufacturer datasheet.

مقایسه با جایگزین‌ها

پارامتر این محصول MAX3232EIDWRG4 MAX3232ECDW
Brand Texas Instruments Texas Instruments Texas Instruments
Package 16-pin SOIC (DW) 16-pin SOIC (DW) 16-pin SOIC (DW)
Product Type Dual RS-232 line driver/receiver Dual RS-232 line driver/receiver Dual RS-232 line driver/receiver
Transmit Channels 2 channels 2 channels 2 channels
Receive Channels 2 channels 2 channels 2 channels
Mounting Type Surface mount Surface mount Surface mount

تفاوت‌های کلیدی

  • Exact original MAX3232 configuration for existing industrial designs (در مقابلMAX3232EIDWRG4)
  • Manufacturer-recommended improved family option (در مقابلMAX3232IDWRG4)
  • Integrated dual-channel interface reduces separate IC count (در مقابلMAX3232ECDW)

یادداشت‌های طراحی

Place the charge-pump capacitors and required supply bypass capacitor directly beside their associated MAX3232IDWRG4 pins, using the shortest possible traces. Keep the external connector and protection network at the board edge, while placing the transceiver nearer the logic controller. This separation helps prevent electrostatic-discharge and cable-transient energy from propagating into sensitive circuitry and reduces the loop area of the switching charge-pump nodes.

Route each RS-232 signal as a point-to-point conductor with a corresponding signal-ground return where practical. Keep the two transceiver channels physically separated to reduce crosstalk, and avoid running RS-232 traces beside switching regulators, clock lines, or sensitive analog inputs. Use a solid ground reference beneath the interface section, and terminate unused inputs according to the manufacturer guidance rather than allowing them to float.

Do not treat a matching SOIC-16 footprint as sufficient proof of interchangeability. Confirm the complete pin functions, charge-pump capacitor values, supply limits, receiver thresholds, driver load, temperature grade, and ESD rating for the exact ordering code. RS-232 is point-to-point, so do not connect one driver output to multiple receiver inputs without an approved switching or distribution arrangement.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The manufacturer identifies ±15 kV ESD protection and an industrial operating temperature range, but the reviewed product records do not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status.

تاریخ تأیید داده‌ها: 2026-11-09 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

MAX3232IDWRG4 datasheet MAX3232IDWRG4 pinout MAX3232IDWRG4 datasheet pdf MAX3232IDWRG4 equivalent MAX3232IDWRG4 replacement MAX3232IDWRG4 cross reference MAX3232IDWRG4 vs MAX3232EIDWRG4 Texas Instruments MAX3232IDWRG4 MAX3232IDWRG4 3V 5.5V MAX3232IDWRG4 250kbps MAX3232IDWRG4 SOIC-16 MAX3232IDWRG4 RS-232 transceiver MAX3232IDWRG4 industrial application MAX3232IDWRG4 price MAX3232IDWRG4 stock

قطعات و اصطلاحات مرتبط

Texas Instruments MAX3232IDWRG4 MAX3232EIDWRG4 MAX3232ECDW RS-232 transceiver RS-232 line driver RS-232 line receiver interface IC serial transceiver data-conversion semiconductor CMOS-compatible logic UART 250 kbps 3 V to 5.5 V supply ±15 kV ESD protection -40°C to +85°C 16-pin SOIC DW package surface-mount package charge-pump capacitor point-to-point interface industrial control point-of-sale terminal barcode scanner test and measurement equipment
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ