Analog Devices

MAX3485EESA+T - 12Mbps RS-485 Transceiver | Analog Devices

MPN: MAX3485EESA+T ✓ فعال
3V to 3.6V Vdss RS-422 and RS-485 Rds(on) 8-pin SOIC Package
حداقل سفارش: 1 |

MAX3485EESA+T نمای کلی

Analog Devices MAX3485EESA+T is a 3.3V-powered, half-duplex RS-485/RS-422 transceiver with one driver and one receiver, a 12Mbps maximum data rate, and ±15kV ESD protection. The device is packaged in an 8-pin SOIC and accepts a 3V to 3.6V supply for industrial, embedded, and instrumentation communications.

An RS-485/RS-422 transceiver is an interface IC that converts logic-level signals into differential bus signals and converts received differential signals back into CMOS-compatible logic. These transceivers support noise-resistant communication over longer cables and multi-drop buses. The MAX3485E combines that differential interface function with low-power 3.3V operation and enhanced electrostatic-discharge protection for ports exposed to cables and industrial wiring.

Key features include true RS-485 and RS-422 operation, a 12Mbps data rate, slew-rate-limited signaling, and integrated ESD protection of ±15kV. The single-driver, single-receiver arrangement supports both point-to-point RS-422 links and half-duplex multidrop RS-485 networks. Its 8-pin SOIC package supports conventional surface-mount assembly and is also available in a tape-and-reel ordering configuration.

The differential driver reduces sensitivity to common-mode noise, while the receiver detects the polarity of the voltage difference across the A and B conductors rather than relying on an absolute signal level. Slew-rate limiting reduces high-frequency harmonics and helps control edge energy on the bus. The ±15kV protection rating adds an important margin for systems whose external connector or cable may be exposed to electrostatic discharge.

Typical uses include industrial automation, factory equipment, building controls, instrumentation, data acquisition, and embedded serial links. The MAX3485E is particularly suitable for a 3.3V controller that needs an RS-485 port without a higher-voltage supply or a separate external protection network. Firmware and termination practices remain important when designing a reliable multidrop network.

For a robust design, place the transceiver close to the connector, provide the required bus-termination and biasing components, connect the ground reference correctly, and route the differential pair as a tightly coupled pair. Keep protection and termination components close to the transceiver pins, and verify that the selected cables, connectors, grounding scheme, and baud rate meet the required communication distance.

This page combines manufacturer product information, interface characteristics, practical bus-layout guidance, and qualified drop-in alternatives. It also highlights the distinctions among related MAX3485-family devices so engineers can compare supply voltage, fail-safe behavior, package, and transceiver behavior before releasing a replacement to production.

جایگزین‌های drop-in برای MAX3485EESA+T — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای MAX3485EESA+T (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Product Type, Maximum Data Rate, Package, RoHS Status, ESD Protection.

Analog Devices
Product Type: RS-485/RS-422 transceiver
Maximum Data Rate: 12 Mbps
Package: 8-pin NSOIC
مقایسه با MAX3485EESA+T →
Analog Devices
Product Type: Half-duplex RS-485/RS-422 transceiver
Maximum Data Rate: 12 Mbps
RoHS Status: unknown
مقایسه با MAX3485EESA+T →
Analog Devices
Product Type: RS-485/RS-422 half-duplex transceiver
Maximum Data Rate: 12 Mbps
Package: 8-pin NSOIC (SOIC-8)
مقایسه با MAX3485EESA+T →
Maxim Integrated
Product Type: RS-485/RS-422 transceiver
Maximum Data Rate: 12 Mbps
Package: 8-pin NSOIC
مقایسه با MAX3485EESA+T →
MaxLinear
Product Type: RS-422/RS-485 half-duplex transceiver
Maximum Data Rate: 10 Mbps
RoHS Status: RoHS-compliant information found in comparison data

MAX3485ECSA+T

✅ جایگزین مستقیم
Analog Devices
📦 8-pin SOIC
RS-485/RS-422 half-duplex transceiver · 3 V to 3.6 V · 12 Mbps · +/-15 kV · 1 driver, 1 receiver · Half-duplex · Slew-rate-limited differential · 8-pin NSOIC (SOIC-8)

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MAX3486ECSA+T

✅ جایگزین مستقیم
📦 8-pin SOIC
Same 3.3V, 12Mbps, ±15kV-protected MAX3486E family and SOIC-8 footprint; fail-safe receiver behavior differs, so verify receiver thresholds before substitution

📋 جایگزین مرجع (خارج از کاتالوگ)

MAX3440EASA+T

✅ جایگزین مستقیم
📦 8-pin SOIC
Same 3.3V RS-485/RS-422 SOIC-8 footprint; interface and electrical characteristics differ from the MAX3485E family, requiring threshold, delay, and enable verification

📋 جایگزین مرجع (خارج از کاتالوگ)

MAX3491EESD+T

✅ جایگزین مستقیم
📦 8-pin SOIC
Same 3.3V RS-485/RS-422 SOIC-8 footprint and up-to-15Mbps-class positioning; true fail-safe behavior is the principal distinction from the MAX3485E

📋 جایگزین مرجع (خارج از کاتالوگ)

SP3485EN-L/TR

✅ جایگزین مستقیم
MaxLinear
📦 8-pin SOIC
RS-422/RS-485 half-duplex transceiver · 3.3 V · 10 Mbps · 1 driver · 1 receiver · Half-duplex · RS-422 and RS-485 · BiCMOS

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MAX3485EESA+T مشخصات

Product Type 1/1 RS-422/RS-485 transceiver
Supply Voltage Range 3V to 3.6V
Maximum Data Rate 12Mbps
ESD Protection ±15kV
Driver Count 1 driver
Receiver Count 1 receiver
Supported Standards RS-422 and RS-485
Communication Mode Half-duplex
Driver Output Type Slew-rate-limited true RS-485/RS-422
بسته‌بندی 8-pin SOIC
نوع نصب Surface mount
RoHS Compliance ROHS3 compliant
REACH Compliance unknown
Lead-Free Status unknown
Packaging Type Tape and reel

راهنمای پیکربندی پین MAX3485EESA+T 8-pin soic

پیکربندی پین برای MAX3485EESA+T (پکیج 8-pin soic). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 8-pin soic برای MAX3485EESA+T

داده پین‌آوت تفصیلی موجود نیست برای MAX3485EESA+T.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MAX3485EESA+T مناسب است برای 6 کاربردs: Industrial Automation Bus Interface, Factory Data-Acquisition System, Building Automation Controller, Embedded Serial Communication Port, Test and Measurement Instrument, RS-422 Point-to-Point Link.

🏭

Industrial Automation Bus Interface

The MAX3485EESA+T fits a 3.3V industrial controller that must communicate with remote sensors, actuators, PLC modules, or motor-control electronics over an RS-485 bus. Its 12Mbps maximum rate supports high-speed data transfer, while the differential interface improves immunity to the common-mode noise commonly encountered near motors and factory power systems. The ±15kV ESD protection also improves robustness where the bus connects to an external connector. Use the transceiver near the connector, route A and B as a differential pair, and apply termination and fail-safe biasing according to the bus topology.

📊

Factory Data-Acquisition System

The MAX3485EESA+T can connect a data-acquisition controller to distributed measurement nodes that expose measurements through RS-485. The 12Mbps capability allows the link to carry frequent packets, while the 3V to 3.6V supply range simplifies integration with 3.3V sensors and embedded processors. Differential signaling reduces errors when cable runs pass near switching equipment. For reliable multidrop operation, confirm that only one driver is active at a time, install termination at physical bus ends, and select bias resistors for the idle state.

🏠

Building Automation Controller

The MAX3485EESA+T is appropriate for a 3.3V building-automation controller that links HVAC equipment, access-control panels, lighting controllers, or environmental monitors through RS-485. The integrated ±15kV ESD protection is valuable when the transceiver connects to building wiring through an external connector. Its 8-pin SOIC package simplifies compact controller-board assembly, and the 12Mbps capability provides ample bandwidth for command and telemetry traffic. Select the cable based on the required distance, maintain a common ground reference where permitted, and protect both signal conductors with an appropriate surge strategy.

🖥️

Embedded Serial Communication Port

The MAX3485EESA+T adds a robust differential communications port to an embedded 3.3V controller without requiring a 5V interface. Its one-driver, one-receiver arrangement supports half-duplex point-to-point RS-422 links and multidrop RS-485 networks, making it useful for service consoles, remote I/O modules, and embedded test equipment. The 12Mbps rate supports high-speed protocols, while slew-rate limiting helps reduce unwanted high-frequency content. Ensure firmware manages driver enable, receiver timeout, and bus turnaround correctly to prevent contention.

🔧

Test and Measurement Instrument

The MAX3485EESA+T can provide the RS-485 or RS-422 link in a portable or rack-mounted measurement instrument. A 12Mbps differential interface supports rapid transfer of captured data from an instrument to a host, while the 3.3V operating range facilitates integration with modern low-power control logic. ESD protection helps reduce sensitivity to electrostatic discharge when users connect external test leads or communication cables. For dependable operation, isolate ground differences where necessary, control cable length and topology, and verify receiver performance over the full temperature range.

🔌

RS-422 Point-to-Point Link

The MAX3485EESA+T supports a full-duplex-style point-to-point RS-422 link when paired with the receive and transmit differential pairs defined for the application. Its slew-rate-limited true driver reduces signal distortion, and the 12Mbps capability accommodates high-speed control or data links between two circuit cards. Unlike a multidrop RS-485 bus, an RS-422 point-to-point connection generally has one driver on each differential pair. Confirm the receiver input range and logic thresholds, use twisted-pair wiring, and place termination only where it supports the intended signal path.

What are the key specifications of MAX3485EESA+T that engineers should know?
The MAX3485EESA+T is a 3.3V-powered, 12Mbps RS-485/RS-422 transceiver with one driver, one receiver, ±15kV ESD protection, and an 8-pin SOIC package. According to the Analog Devices MAX3485E product information, it is a low-power, slew-rate-limited true transceiver designed for 3V to 3.6V operation. Its combination of differential signaling, half-duplex communication, and integrated ESD protection makes it suitable for industrial equipment, embedded controllers, instrumentation, and long-distance serial links where cable transients and common-mode noise are concerns.
What is the operating voltage range of MAX3485EESA+T?
The MAX3485EESA+T operates from 3V to 3.6V. According to the Analog Devices MAX3485E product information, this is a 3.3V RS-485/RS-422 transceiver designed to interface directly with 3.3V digital controllers. The complete operating limits should be checked against the manufacturer datasheet when defining the power architecture, including supply tolerance, ground reference, and component power sequencing. This operating range also makes the device suitable for industrial and embedded systems that use 3.3V logic rather than a 5V interface.
What is the maximum data rate of MAX3485EESA+T?
The MAX3485EESA+T supports data rates up to 12Mbps. The manufacturer describes it as a low-power, slew-rate-limited true RS-485/RS-422 transceiver, which combines a controlled output transition rate with a high maximum signaling rate. The practical bus length and reliability at 12Mbps remain strongly dependent on cable type, topology, termination, stub length, grounding, and electromagnetic environment, so the 12Mbps figure should not be treated as a guarantee for every physical installation.
Where can I download the MAX3485EESA+T datasheet PDF?
The MAX3485EESA+T datasheet and product information are available through the Analog Devices MAX3485E product page at https://www.analog.com/en/products/max3485e.html. Use the manufacturer document on that page for the authoritative pin description, electrical characteristics, typical application circuit, recommended external components, and package dimensions. The product page is also the best starting point for the corresponding MAX3485 family documentation and revision information.
Where can I find the MAX3485EESA+T pinout?
Use the pin-description table and package drawing in the Analog Devices MAX3485E datasheet to locate the MAX3485EESA+T pinout. The device is an 8-pin SOIC transceiver, and its functional pins include the differential bus and driver-control connections described by the manufacturer. Because an exact pin-number mapping is not published in the product summary, follow the datasheet rather than relying on a generic 8-pin RS-485 diagram, especially when confirming driver enable polarity, receiver output, supply pins, and ground connections.
Where to buy MAX3485EESA+T online?
Use the Request a Quote form on this page to request MAX3485EESA+T availability, packaging details, and a current quotation. The form is the appropriate route for checking stock, order quantities, and lead time without relying on static market information. Specify the exact MAX3485EESA+T ordering code and confirm the required reel or shipment configuration when submitting the request so the commercial response matches the intended assembly process.
What is the price of MAX3485EESA+T?
Request a current MAX3485EESA+T quotation through the Request a Quote form on this page. The form supports direct confirmation of unit pricing, quantity breaks, and any shipping or handling conditions for the exact 8-pin SOIC ordering code. Market pricing can change with availability, order quantity, and packaging, so a current quotation is more useful than a static price reference. Include your forecast quantities and required delivery schedule in the request.
What is the lead time for MAX3485EESA+T?
The current lead time for MAX3485EESA+T should be requested through the Request a Quote form on this page. Provide your required quantity, target date, and shipment packaging so the quotation can reflect the actual production plan. Because availability may vary by reel configuration and order volume, treat any lead-time statement without those details as incomplete. The manufacturer identifies the MAX3485E family as a production product, while current commercial scheduling remains a purchasing consideration.
Is MAX3485EESA+T in stock?
Request current MAX3485EESA+T stock status through the Request a Quote form on this page. The request should identify the exact MPN, reel quantity, and forecast consumption so the response can distinguish packaged production stock from unallocated channel inventory. Use the returned confirmation and lead time as the basis for the build schedule rather than assuming that general marketplace availability maps directly to your required order quantity.
What is the best drop-in replacement for MAX3485EESA+T?
The MAX3485ECSA+T is the closest same-family drop-in candidate because it retains the 3.3V RS-485/RS-422 transceiver architecture and 8-pin SOIC format. Other qualified options include the MAX3486ECSA+T and MAX3440EASA+T, subject to their respective interface and fail-safe behavior. According to the manufacturer family information, MAX3485E and MAX3486E share the 12Mbps, ±15kV-protected 3.3V transceiver positioning, but engineers should compare supply, receiver thresholds, and shutdown features before substitution.
Can MAX3486ECSA+T replace MAX3485EESA+T on an existing PCB?
The MAX3486ECSA+T is a potential pin-compatible replacement for the MAX3485EESA+T because both use an 8-pin SOIC and belong to the manufacturer's 3.3V, 12Mbps, slew-rate-limited RS-485/RS-422 family. However, the cross-reference comparison identifies functional differences that must be reviewed. Confirm the exact pin mapping, receiver fail-safe threshold, driver enable behavior, supply limits, and electrical characteristics in the manufacturer datasheet before treating it as a production drop-in replacement.
When should I choose MAX3485EESA+T over MAX3440EASA+T?
Choose the MAX3485EESA+T when the design specifically calls for a 12Mbps, 3.3V, ±15kV ESD-protected RS-485/RS-422 transceiver in an 8-pin SOIC. Choose the MAX3440EASA+T only after confirming that its electrical interface, fail-safe response, supply behavior, and pin functions satisfy the system requirement. Both are presented as related 8-pin transceivers, but matching a package and data-rate headline alone is insufficient; the manufacturer data for each device should determine the final selection.
Is MAX3485EESA+T suitable for industrial automation and factory equipment?
The MAX3485EESA+T is suitable for industrial automation and factory equipment that uses a 3.3V RS-485 or RS-422 bus. Its 12Mbps capability supports high-speed data links, while ±15kV ESD protection adds useful robustness for interfaces connected to external wiring. The final design must still include correct bus termination, fail-safe biasing, surge strategy, connector grounding, and cable routing. Industrial suitability also depends on the device's operating-temperature grade, which should be confirmed for the target enclosure and ambient range.
What can replace MAX3485EESA+T?
Potential replacements include MAX3485ECSA+T, MAX3486ECSA+T, MAX3440EASA+T, and MAX3491EESD+T, all of which are associated with related 8-pin MAX3485-family interface options. The SP3485EN-L/TR is another external-device reference worth evaluating. A valid replacement must match the PCB footprint and pin functions while meeting the required supply voltage, maximum data rate, ESD level, receiver thresholds, and fail-safe behavior. Review each manufacturer's datasheet and validate the bus with the intended cable and termination network.
Is MAX3485EESA+T the same as MAX3491EESD+T?
The MAX3485EESA+T and MAX3491EESD+T are related 3.3V RS-485/RS-422 transceivers in 8-pin packages, but they are not necessarily identical in every operating parameter. The MAX3491EESD+T is associated with true fail-safe behavior, while the MAX3485E emphasizes its 12Mbps rate and ±15kV ESD protection. Use the manufacturer datasheets to compare receiver thresholds, propagation delay, driver enable, supply current, and exact pin behavior before treating either device as interchangeable.
What is the best Analog Devices equivalent for MAX3485EESA+T?
The MAX3485ECSA+T is the most direct Analog Devices family alternative for MAX3485EESA+T, followed by the MAX3486ECSA+T for applications whose fail-safe and electrical requirements match that device. Both appear in comparison data alongside the target and use the same SOIC-8 format. The closest equivalent is determined by more than the MPN suffix: confirm data rate, supply range, ESD rating, receiver common-mode range, fail-safe response, and pin-level shutdown behavior against the system requirements.

داده‌های مرجع مهندسی برای MAX3485EESA+T — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the MAX3485EESA+T when the design uses a 3.3V controller, requires a half-duplex RS-485 or RS-422 link in an 8-pin SOIC, and benefits from a characterized 12Mbps data rate with ±15kV ESD protection. The MAX3485ECSA+T is the most direct family alternative when its temperature grade matches the deployment environment. Consider the MAX3486ECSA+T when true fail-safe receiver behavior is valuable, and review the MAX3491EESD+T when its fail-safe and timing characteristics better fit the bus. The MAX3440EASA+T is suitable only after confirming its complete electrical interface and pin behavior. For a cross-brand choice, evaluate the SP3485EN-L/TR against every required threshold, timing, protection, and supply parameter. For any replacement, verify the footprint, pin map, bus-idle state, driver-enable polarity, termination strategy, and full operating-temperature range before production release.

مقایسه با جایگزین‌ها

پارامتر این محصول MAX3485ECSA+T MAX3486ECSA+T MAX3440EASA+T MAX3491EESD+T SP3485EN-L/TR
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Exar
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Product Type 1/1 RS-422/RS-485 transceiver 1/1 RS-422/RS-485 transceiver 1/1 RS-422/RS-485 transceiver RS-422/RS-485 transceiver RS-422/RS-485 transceiver RS-422/RS-485 transceiver
Supply Voltage 3V to 3.6V 3V to 3.6V 3V to 3.6V 3V to 3.6V 3V to 3.6V 3.3V class
Driver and Receiver Count 1 driver, 1 receiver 1 driver, 1 receiver 1 driver, 1 receiver 1 driver, 1 receiver 1 driver, 1 receiver 1 driver, 1 receiver

تفاوت‌های کلیدی

  • Direct MAX3485E family match (در مقابلMAX3485ECSA+T)
  • True fail-safe receiver option (در مقابلMAX3486ECSA+T)
  • Established 12Mbps RS-485/RS-422 positioning (در مقابلSP3485EN-L/TR)

یادداشت‌های طراحی

Place the MAX3485EESA+T close to the RS-485 or RS-422 connector and termination network. Route A and B as a tightly coupled differential pair over a continuous ground plane, minimize stubs, and avoid sharing the pair with unrelated high-current or switching paths. Keep the interface return ground available and ensure its reference relationship is appropriate for the installation. Compact placement shortens the unprotected portion of the cable connection and improves ESD-current diversion into the board's grounding structure.

Do not assume that an SOIC-8 package alone proves replacement compatibility. Compare the exact pin function, driver-enable polarity, receiver thresholds, fail-safe response, supply limits, and shutdown behavior for every candidate. On a multidrop bus, ensure only one driver is enabled at a time and provide bias resistors that hold the bus in a defined idle state. Fit termination only at the physical ends of the trunk, not at every node, and remove unnecessary branch stubs.

Slew-rate limiting reduces edge energy, but reliable operation still requires an appropriate cable, topology, and baud-rate margin. Use twisted-pair wiring, avoid long unterminated branches, and test the complete network with its planned node count and cable length. If the cable leaves the enclosure, combine the transceiver's ±15kV ESD capability with appropriately coordinated surge and overvoltage protection. Validate the external protection network so that its capacitance and clamping behavior do not distort the intended data rate.

اطلاعات انطباق

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The component is identified as ROHS3 compliant. REACH, lead-free, halogen-free, and conflict-minerals status were not established from authoritative compliance information. AEC-Q100 qualification is not applicable to this catalog classification.

تاریخ تأیید داده‌ها: 2026-11-09 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

max3485eesa t datasheet MAX3485EESA+T datasheet MAX3485EESA+T pinout MAX3485EESA+T datasheet pdf MAX3485EESA+T schematic MAX3485EESA+T equivalent MAX3485EESA+T replacement MAX3485EESA+T cross reference MAX3485EESA+T vs MAX3486ECSA+T MAX3485EESA+T footprint MAX3485EESA+T application circuit Analog Devices MAX3485EESA+T MAX3485EESA+T 12Mbps transceiver MAX3485EESA+T price MAX3485EESA+T stock

قطعات و اصطلاحات مرتبط

Analog Devices MAX3485EESA+T MAX3485E MAX3485ECSA+T MAX3486ECSA+T MAX3440EASA+T MAX3491EESD+T SP3485EN-L/TR Exar RS-485 RS-422 half-duplex transceiver differential transceiver interface IC semiconductor 12Mbps data rate ±15kV ESD protection 3V to 3.6V supply slew-rate-limited driver SOIC-8 SOIC package surface mount industrial automation building automation RoHS3
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ