Maxim Integrated

MAX352EPE - Quad 35Ω SPST Analog Switch | Maxim Integrated

MPN: MAX352EPE ✓ فعال
35 ohm maximum Rds(on) 16-pin PDIP Package
حداقل سفارش: 1 |

MAX352EPE نمای کلی

The Maxim Integrated MAX352EPE is a precision quad SPST analog switch with four normally open channels, a 35Ω on-resistance, and a 16-pin PDIP package. It is designed for controlled routing of low-frequency analog signals and provides a 1:1 circuit configuration.

An analog switch is an integrated semiconductor device that connects or disconnects signal paths under digital control. The MAX352 belongs to the broader hierarchy of analog switches, analog multiplexers, interface ICs, and semiconductor signal-routing components. Unlike a mechanical relay, it changes connection state electronically, allowing compact equipment with fast and repeatable routing. Each of its four switches is normally open, so the default state provides signal-path isolation rather than a permanently connected route.

Key characteristics include four SPST channels, 1:1 signal routing, and a maximum specified on-resistance of 35Ω. The EPE suffix identifies the 16-pin PDIP industrial-temperature ordering variant. The device is supplied as a through-hole package, making it appropriate for legacy boards, instrumentation, control systems, and prototypes where a surface-mount footprint would be inconvenient. The product family is produced by Maxim Integrated, whose product portfolio is now represented by Analog Devices.

The MAX352’s four normally open switches make it useful for source selection, signal isolation, test-point routing, and external-interface switching. Each channel can independently connect its designated terminal pair when the corresponding control input is asserted. Because it is a unilateral 1:1 routing element, the switch should be evaluated for signal amplitude, source impedance, leakage, charge injection, and off-state behavior according to the manufacturer data sheet.

The MAX352 is especially relevant when rebuilding or maintaining equipment that already specifies a 16-pin quad-SPST analog switch. Because pin compatibility and electrical equivalence must be confirmed at the exact terminal and control level, engineers should compare the full data sheet rather than relying only on the package outline. The 35Ω resistance can be significant for high-impedance precision measurements, while it may remain acceptable for control, sensor, audio, or low-frequency instrumentation signals.

A practical layout should route sensitive analog conductors away from digital control traces, maintain a common ground reference, and place protection or filtering components where they do not degrade switch isolation. The MAX352EPE is also the exact 16-pin PDIP member to select when a MAX352 function is required and the board does not provide SMD pads.

This page combines the manufacturer family information with verified distributor packaging details, replacement analysis, application guidance, and design considerations for engineers maintaining or reproducing a MAX352EPE-based circuit.

جایگزین‌های drop-in برای MAX352EPE — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای MAX352EPE (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Switch Configuration.

Maxim Integrated
Package: 16-pin PDIP, 0.300 inch (7.62mm) pitch
Switch Configuration: 1:1 SPST
مقایسه با MAX352EPE →

MAX352CPE+

✅ جایگزین مستقیم
Maxim Integrated
📦 16-pin PDIP
4 switches · 1:1 SPST · Normally open (NO) · 35Ω maximum · 2Ω maximum · 3Ω maximum · 250pA · 175ns and 145ns

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MAX352EPE حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type Precision quad SPST analog switch
Number of Circuits 4 circuits
Switch Configuration 1:1
Number of Channels 4 channels
Switch Type Single-pole single-throw (SPST)
Default Switch State Normally open (NO)
On-Resistance 35 ohm maximum
بسته‌بندی 16-pin PDIP
نوع نصب Through-hole
Temperature Grade Industrial
Number of Terminals 16 terminals
Package Shape Rectangular
Surface Mount No
Production Status Production

راهنمای پیکربندی پین MAX352EPE rectangular

پیکربندی پین برای MAX352EPE (پکیج rectangular). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج rectangular برای MAX352EPE

داده پین‌آوت تفصیلی موجود نیست برای MAX352EPE.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MAX352EPE مناسب است برای 6 کاربردs: Legacy Test and Measurement Equipment, Analog Signal Isolation, Sensor and Control Routing, Audio Signal Selection, Automated Interface Switching, Board Repair and Obsolescence Mitigation.

🖥️

Legacy Test and Measurement Equipment

The MAX352EPE fits repair and modernization work on legacy test equipment because it combines four normally open SPST channels with a 16-pin through-hole footprint. The switches can route test signals, isolate instrument sections, or select external sources without requiring a surface-mount redesign. Its 35Ω maximum on-resistance is practical for many low-frequency measurement and control paths, although precision high-impedance inputs should be checked for loading. Use the manufacturer pin table to preserve the original control polarity and terminal assignments.

🧩

Analog Signal Isolation

The MAX352EPE can isolate an analog signal path when the default normally open state must keep the route disconnected until commanded. Its four independent SPST channels provide practical routing for sensor lines, control outputs, and low-speed instrumentation signals. The 35Ω maximum on-resistance adds series loss and should be considered with the source impedance and receiver input impedance. The DIP package also makes it convenient to socket during repair or characterization work.

🏭

Sensor and Control Routing

The MAX352EPE is suitable for industrial control boards that route several low-frequency sensor or actuator signals through selectable paths. Four normally open switches can isolate channels during calibration, connect redundant inputs, or provide a controlled bypass. The industrial temperature-grade ordering code makes it relevant to equipment operating beyond typical consumer conditions, while the through-hole package supports repairable industrial hardware. Verify supply voltage, control levels, leakage, and switching transients from the data sheet.

🎧

Audio Signal Selection

The MAX352EPE can select or isolate low-level audio paths in laboratory and legacy audio equipment. Four independently controlled normally open channels allow a source to be connected only during the required interval, which can help suppress unwanted paths between switching events. The 35Ω on-resistance may be acceptable for typical low-impedance audio routing, but it is not ideal for very low-noise or high-impedance precision stages. Keep control traces away from the audio conductors to reduce injected noise.

⚡

Automated Interface Switching

The MAX352EPE supports repeatable routing in automated interfaces that connect external equipment to internal measurement circuits. Its four SPST switches can select stimulus sources, disconnect external loads, or form repeatable test paths under digital control. Because it is a 1:1 unilateral switch rather than a multiplexer, each switched pair must have the required driver and receiver arrangement. The 16-pin PDIP footprint is advantageous for older or highly serviceable industrial systems.

🔧

Board Repair and Obsolescence Mitigation

The MAX352EPE provides a practical repair option for boards designed around the original Maxim Integrated MAX352EPE footprint. Installing a MAX352CPE+ can preserve the four normally open SPST functions and the 16-pin terminal arrangement when the original component is unavailable for repair. The substitution should be approved only after checking temperature range, supply conditions, and all device limits. Socketed repair assemblies can simplify inspection and future replacement.

What is the MAX352EPE?
The MAX352EPE is a production, precision quad SPST analog switch from Maxim Integrated with four normally open channels in a 16-pin PDIP package. According to the manufacturer's MAX352 product page, it belongs to the MAX351/MAX352/MAX353 family, and the MAX352 configuration provides four normally open switches. Its specified on-resistance is 35Ω, making it intended for general analog signal routing rather than low-impedance precision measurement paths.
What are the key specifications of MAX352EPE that engineers should know?
The MAX352EPE combines four SPST channels, 1:1 routing, a 35Ω maximum on-resistance, normally open switch behavior, and a 16-pin PDIP package. The manufacturer lists the MAX352 family as production, while distributor records identify the EPE suffix as the industrial-temperature, through-hole ordering variant. Check the complete data sheet for supply voltage, leakage, control thresholds, channel matching, and absolute maximum ratings before finalizing a design.
Is the MAX352EPE normally open or normally closed?
The MAX352EPE has four normally open switch channels. The manufacturer family information identifies MAX351 as four normally closed devices, MAX352 as four normally open devices, and MAX353 as a mixed two-NO/two-NC version. This distinction is functionally important because the default electrical state changes which signal path is connected before a control input is asserted.
Where can I download the MAX352EPE datasheet PDF?
The official MAX352 datasheet and product documentation are available from the Analog Devices product page at https://www.analog.com/en/products/max352.html. That page identifies MAX352 as a production precision quad SPST analog switch and links its data sheet, which is the controlling document for the MAX352EPE ordering code. Use the manufacturer document for pin descriptions, recommended operating conditions, and maximum ratings rather than relying on a distributor summary.
Where can I find the MAX352EPE pinout?
The MAX352EPE pinout is identified in the pin-description section of the manufacturer MAX352 data sheet. Because this ordering code uses a 16-pin PDIP package, the physical layout has eight pins on each side, but terminal names and control logic must be assigned directly from the data sheet. The package drawing alone identifies the mechanical footprint but does not establish pin compatibility with another switch.
What can replace the MAX352EPE?
The closest verified replacement is the MAX352CPE+, which retains the MAX352 family's four normally open SPST channels in a 16-pin PDIP package. A component comparison identifies consistent terminals and package characteristics, allowing replacement without modifying the existing circuit. No other cross-brand drop-in alternative with verified pin compatibility was identified, so any proposed substitute must be checked against the complete data sheet before use.
Is MAX352CPE+ a drop-in replacement for MAX352EPE?
Yes, the MAX352CPE+ is a drop-in candidate for MAX352EPE because both use the MAX352 four-channel normally open SPST function in a 16-pin PDIP package. The comparison describes their terminals and packages as consistent and states that replacement does not require circuit modification. Temperature-grade markings and operating limits should still be checked to ensure the replacement meets the original assembly requirements.
MAX352EPE vs MAX352CPE+ - which is better for a legacy instrument?
The MAX352CPE+ is generally the better choice for a legacy instrument already built around the MAX352EPE footprint because it preserves the 16-pin PDIP package, four normally open SPST switches, and matching terminal arrangement. The MAX352EPE remains appropriate when the original specified industrial-grade ordering code must be retained. Both devices should be reviewed for temperature range, control levels, and exact electrical limits.
When should I choose MAX352EPE over another analog switch?
Choose the MAX352EPE when the design requires four normally open SPST channels, a through-hole 16-pin PDIP footprint, and the established MAX352 terminal arrangement. It is especially useful for maintaining older analog instruments, test systems, or control boards that cannot accept an SMD footprint. For new compact products, a surface-mount equivalent may be preferable if its signal and control characteristics meet the application requirements.
Is MAX352EPE suitable for analog signal routing?
The MAX352EPE is suitable for low-frequency analog signal routing when its 35Ω on-resistance, leakage, switching behavior, and supply requirements meet the circuit's accuracy targets. Its four normally open SPST channels can route control, sensor, audio, or test signals while providing a default disconnected state. High-impedance precision measurements may require a lower-resistance switch.
What is the lead time for MAX352EPE?
Request the current lead time, minimum order quantity, and production allocation through the Request a Quote form on this page. The manufacturer lists the MAX352 family as production, and a distributor listing states that MAX352EPE ships today, but current lot availability can vary with order quantity and packaging. A written quotation provides the appropriate production and delivery commitment for the requested quantity.
Where to buy MAX352EPE online?
Use the Request a Quote form on this page to request MAX352EPE availability, current commercial terms, and lead time for the required quantity. The component is listed as a production part in the 16-pin PDIP package, and a distributor listing confirms active orderability. XAIPART can confirm exact sourcing, lot traceability, and delivery details without relying on a static price that may change.
Is MAX352EPE in stock?
A distributor listing states that MAX352EPE ships today, indicating current orderability, but it does not provide a guaranteed stock quantity for every order. Use the Request a Quote form on this page to confirm available quantity, factory packaging, lot allocation, and expected dispatch timing. This is the most reliable method for obtaining a production commitment based on the requested quantity.
What is the price of MAX352EPE?
The current commercial price depends on quantity, production allocation, packaging, and delivery terms. Use the Request a Quote form on this page for the applicable unit cost, quantity breaks, and lead time for MAX352EPE. The manufacturer lists the MAX352 family as production, and distributor records identify the EPE code as an orderable 16-pin PDIP configuration.
What is the best Analog Devices equivalent for MAX352EPE?
The best verified Analog Devices or Maxim Integrated-family equivalent is the MAX352CPE+, because it preserves the four normally open SPST channels and 16-pin PDIP package. The component comparison identifies consistent terminals and packages, making it a direct replacement candidate. No cross-brand equivalent was confirmed with sufficient pin-level and electrical evidence, so MAX352CPE+ is the defensible same-family choice.

داده‌های مرجع مهندسی برای MAX352EPE — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the MAX352EPE for new builds or repairs that explicitly require four normally open SPST switches in a 16-pin PDIP industrial-grade package. Its 35Ω on-resistance must remain acceptable relative to the source impedance, receiver impedance, signal level, and allowable measurement error. Choose the MAX352CPE+ when the board already uses the MAX352EPE terminal arrangement and a same-family component is needed for maintenance; its package and terminal compatibility are documented, although temperature limits must be verified. Do not substitute MAX351 or MAX353 solely for package fit because their default switch states differ. No cross-brand drop-in part was confirmed with sufficient pin-level and electrical evidence, so a different manufacturer should be considered only after a complete data-sheet comparison and successful prototype validation.

مقایسه با جایگزین‌ها

پارامتر این محصول MAX352CPE+
Brand Maxim Integrated Maxim Integrated
Package 16-pin PDIP 16-pin PDIP
Circuit Count 4 circuits 4 circuits
Switch Configuration 1:1 1:1
Switch Type SPST SPST
Default State Normally open Normally open
Mounting Type Through-hole Through-hole

تفاوت‌های کلیدی

  • Verified same-family mechanical and terminal compatibility (در مقابلMAX352CPE+)
  • Exact industrial-grade ordering option (در مقابلMAX352CPE+)
  • Normally open behavior provides a defined disconnected default state (در مقابلMAX352CPE+)

یادداشت‌های طراحی

Treat the 35Ω maximum on-resistance as part of the signal-path impedance, not merely a switching specification. Estimated insertion loss from resistance alone can be calculated as 20 log10[(Rsource + 35Ω + Rload)/(Rsource + Rload)] using the actual source and load impedances. Compare that result with the allowable signal-amplitude error before using the switch for precision measurement or high-value control signals.

Route the switched analog terminals directly between their paired pins and keep unrelated control or digital lines away from these paths. Use a continuous ground plane where the board design permits and place any input filtering or protection close to the receiver. Control traces should be driven cleanly because voltage transitions at the logic inputs can couple into adjacent analog conductors, particularly when the switch handles high-impedance sources.

Do not select the MAX351, MAX352, or MAX353 solely because their packages match. The manufacturer identifies MAX351 as four normally closed switches, MAX352 as four normally open switches, and MAX353 as two normally open plus two normally closed switches. Mixing these default states can reverse a system behavior or create an unintended connection. Also confirm the E ordering suffix against the required operating-temperature range before approving a substitution.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The manufacturer product page identifies MAX352 as a production part, but the retrieved information does not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status for the MAX352EPE ordering code. The device is an industrial-grade through-hole analog switch rather than an automotive-qualified ordering variant.

تاریخ تأیید داده‌ها: 2026-11-19 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

MAX352EPE MAX352EPE datasheet MAX352EPE datasheet pdf MAX352EPE pinout MAX352EPE equivalent MAX352EPE replacement MAX352EPE cross reference MAX352EPE vs MAX352CPE+ MAX352EPE DIP-16 Maxim Integrated MAX352EPE MAX352EPE price MAX352EPE stock MAX352EPE application circuit MAX352 35 ohm SPST switch what is MAX352EPE

قطعات و اصطلاحات مرتبط

Maxim Integrated Analog Devices MAX352EPE MAX352CPE+ precision analog switch SPST switch normally open switch 1:1 switching 35 ohm on-resistance analog signal routing signal isolation interface IC semiconductor switch 16-pin PDIP DIP-16 through-hole package surface-mount alternative industrial temperature grade test and measurement sensor routing audio signal selection legacy equipment repair
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ