Maxim Integrated

MAX379CWG+ - Fault-Protected 4:1 Multiplexer | Maxim Integrated

MPN: MAX379CWG+ ✓ فعال
3.5 kOhm Rds(on) 24-pin SOIC Package
حداقل سفارش: 1 |

MAX379CWG+ نمای کلی

The Maxim Integrated MAX379CWG+ is a high-voltage, fault-protected analog multiplexer with two 4:1 circuits, an on-resistance of 3.5 kOhm, and a 24-pin SOIC package. It selects four differential signal pairs, or eight single-ended inputs in differential operating mode, making it suitable for routing controlled signals in instrumentation, test, measurement, and industrial systems. The MAX379 family is designed to limit fault-current exposure when input voltages remain present while the device supplies are turned off.

An analog multiplexer is an interface IC that connects multiple signal paths to a smaller number of shared pins. The MAX379 belongs to the broader multiplexer hierarchy, where its differential 4:1 architecture reduces the number of external connections required by a system with several paired inputs. This is particularly useful when board space, connector count, or routing complexity must be controlled without sacrificing selectable signal channels.

Key features include two independent 4:1 circuits, 3.5 kOhm on-resistance, an eight-channel high-voltage fault-protected configuration, and operation from dual supply rails. The manufacturer describes the implementation as a series N-channel, P-channel, and N-channel structure. This arrangement provides meaningful fault protection by turning the channels off when the supplies are removed while signal inputs can still be present, limiting unintended current paths.

The MAX379CWG+ is a differential rather than single-ended multiplexer. Each selected channel can carry a pair of related signals, supporting balanced measurement, instrumentation, or test systems where signal polarity and common-mode behavior matter. Its 24-pin SOIC footprint is a surface-mount package intended for conventional PCB assembly, while the operating limits and exact channel ratings should be checked against the manufacturer datasheet before using it outside laboratory voltages.

Typical uses include automated test equipment, data-acquisition systems, industrial control interfaces, oscilloscope input routing, and multichannel sensor conditioning. It is particularly appropriate when multiple high-impedance sources must be connected to downstream instrumentation. Designers should account for the 3.5 kOhm on-resistance, assess leakage and off-channel behavior, and ensure that external circuitry keeps faulted inputs within the absolute maximum ratings.

For a robust layout, place the device close to the multiplexer bus and use a quiet ground-plane connection. Signal traces should avoid crossing high-current switching paths, and unused inputs should be handled according to the datasheet guidance. Supply decoupling must follow the manufacturer recommendation, while external series resistance may be needed to limit fault current in higher-energy systems.

This product summary combines the manufacturer's device description with package, interface, and application analysis, helping engineers identify whether the MAX379CWG+ provides the required differential channel count and fault-protected behavior. The accompanying comparison, pinout, sourcing, and design guidance make the selection process more practical than a basic distributor listing alone.

جایگزین‌های drop-in برای MAX379CWG+ — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

MAX379CWG

✅ جایگزین مستقیم
📦 24-pin SOIC
Same two-circuit 4:1 differential architecture, 3.5 kOhm on-resistance, and 24-pin SOIC footprint; ordering-code and orderable-status differences remain

📋 جایگزین مرجع (خارج از کاتالوگ)

MAX379CWG+ مشخصات

Number of Circuits 2 circuits
Multiplexer Configuration 4:1 per circuit
Total Differential Channels 4 channels
Input Architecture 8 single-ended inputs configured as 4 differential channels
On-Resistance 3.5 kOhm
Signal Configuration Differential
Fault Protection High-voltage, fault-protected
Internal Switching Structure Series N-channel/P-channel/N-channel structure
Off-State Behavior Channels turn off when the power supplies are turned off while input voltages remain applied
بسته‌بندی 24-pin SOIC
Package Type Surface mount

راهنمای پیکربندی پین MAX379CWG+ surface mount

پیکربندی پین برای MAX379CWG+ (پکیج surface mount). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج surface mount برای MAX379CWG+

داده پین‌آوت تفصیلی موجود نیست برای MAX379CWG+.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MAX379CWG+ مناسب است برای 6 کاربردs: Automated Test Equipment Signal Routing, Data Acquisition and Sensor Conditioning, Oscilloscope and Measurement Front Ends, Industrial Control Interface Multiplexing, High-Voltage Signal Conditioning, Medical and Laboratory Instrument Inputs.

🏭

Automated Test Equipment Signal Routing

The MAX379CWG+ fits automated test systems that must route several paired measurement sources through a limited number of downstream instruments. Its two 4:1 circuits provide four selectable differential channels, while the 3.5 kOhm on-resistance must be included in the source-impedance and sensitivity budget. The fault-protected architecture is valuable when a tested source can remain energized during partial system power-down, because channels turn off when device power is removed. Place the multiplexer near the shared analog bus and account for leakage, off-channel isolation, and switching transients in the instrument front end.

📡

Data Acquisition and Sensor Conditioning

The MAX379CWG+ can reduce connection count in multichannel data-acquisition systems by selecting among four differential input pairs. Its differential organization is advantageous when the source produces balanced or closely related signals, while two independent 4:1 sections allow separate groups of channels to share downstream analog front ends. The 3.5 kOhm on-resistance can be material when the source has high output impedance, so designers should verify that the selected sensor and amplifier retain sufficient bandwidth and signal-to-noise performance. Decoupling and grounding should follow the manufacturer reference circuit.

📟

Oscilloscope and Measurement Front Ends

The MAX379CWG+ is suitable for routing multiple differential inputs into oscilloscope or precision measurement front ends where channel sharing is necessary. Two 4:1 sections provide four selectable paired inputs, and the high-voltage fault-protection feature helps control unintended paths if a signal remains applied while the multiplexer is unpowered. The 3.5 kOhm on-resistance should be compared with the complete front-end input impedance rather than considered in isolation. Short traces, a continuous ground reference, and placement close to the measurement path help limit added capacitance, crosstalk, and pickup.

🏭

Industrial Control Interface Multiplexing

The MAX379CWG+ can serve as a controlled analog selector in industrial interfaces that must compare or distribute several differential signals to a common processing path. Its dual 4:1 topology gives engineers more routing flexibility than a single selector, and the 24-pin SOIC package supports conventional surface-mount assembly. Because industrial signals may experience transients or remain present during shutdown, the external protection network and applied voltages must be checked against the device's absolute maximum ratings. Robust grounding, controlled return paths, and careful isolation from motor and switching nodes are essential for reliable operation.

⚡

High-Voltage Signal Conditioning

The MAX379CWG+ is appropriate for signal-conditioning systems that require a high-voltage, fault-protected switching element. The manufacturer's MAX379 description emphasizes that all channels turn off when the power supplies are inadvertently turned off while input voltages are still applied, limiting unintended current flow through the switching network. This behavior supports safer partial-power-down conditions, although it does not replace external fusing or overvoltage protection. The input range, off leakage, and fault-current limits must be verified from the manufacturer datasheet before selecting external resistors, clamps, and protection devices.

💊

Medical and Laboratory Instrument Inputs

The MAX379CWG+ can support channel selection in laboratory and medical instrumentation where multiple differential sensor outputs must reach a common amplifier or converter. The differential architecture preserves the relationship between signal pairs, and the two independent 4:1 circuits allow flexible source grouping. Designers must include the 3.5 kOhm on-resistance in the complete source-and-amplifier noise budget and confirm that leakage and switching behavior satisfy the required measurement accuracy. For patient-connected systems, an appropriately rated isolation and protection strategy remains necessary; the multiplexer itself is not an isolation barrier.

خلاصه محصولات پیشنهادی

MAX379CWG Same-family 24-pin SOIC ordering option استفاده‌شده در: Automated Test Equipment Signal Routing, Data Acquisition and Sensor Conditioning, Oscilloscope and Measurement Front Ends, Industrial Control Interface Multiplexing, High-Voltage Signal Conditioning, Medical and Laboratory Instrument Inputs MAX379CWG+T Tape-and-reel ordering option for the same MAX379 device استفاده‌شده در: Automated Test Equipment Signal Routing, Data Acquisition and Sensor Conditioning, Oscilloscope and Measurement Front Ends, Industrial Control Interface Multiplexing, High-Voltage Signal Conditioning, Medical and Laboratory Instrument Inputs
What is the MAX379CWG+ used for?
The MAX379CWG+ is a high-voltage, fault-protected analog multiplexer for routing two sets of four differential signal pairs. It provides two 4:1 circuits, an on-resistance of 3.5 kOhm, and a 24-pin SOIC package. According to the Maxim Integrated manufacturer datasheet for the MAX379 family, its series N-channel/P-channel/N-channel structure turns the channels off if the supplies are removed while input voltages remain applied.
Is MAX379CWG+ a single-ended or differential multiplexer?
The MAX379CWG+ is a differential multiplexer with two 4:1 circuits, giving four selectable differential channels or eight single-ended inputs when connected differentially. The manufacturer describes the MAX379 as a four-channel differential, 2-of-8 multiplexer. Unlike the related MAX378 single-ended architecture, the MAX379 is intended to route paired signals, which helps preserve signal relationships in balanced instrumentation and test systems.
What is the on-resistance of MAX379CWG+?
The MAX379CWG+ has a specified on-resistance of 3.5 kOhm according to the Maxim Integrated manufacturer datasheet and product listing information. This resistance forms part of the signal path when a channel is selected and should be included in the input-impedance and gain calculations of the connected source and measurement circuit. Maximum channel resistance, leakage, and configuration-dependent variation are not reproduced here.
What fault protection does MAX379CWG+ provide?
The MAX379CWG+ provides high-voltage fault protection by turning its channels off when the power supplies are inadvertently turned off while input voltages are still present. The Maxim Integrated manufacturer datasheet attributes this behavior to a series N-channel/P-channel/N-channel switching structure. The design limits unintended fault-current paths, but the applied input voltage must still remain within the device's absolute maximum and operating limits.
Where can I download the MAX379CWG+ datasheet PDF?
The official MAX379CWG+ documentation is available from the Maxim Integrated product page at analog.com and through the manufacturer-linked datasheet resources listed there. The device is specified as a production part, and the manufacturer data sheet is identified as revision 1. Use the pin-description table, absolute maximum ratings, and recommended operating circuit from that document when assigning PCB tracks and selecting external protection components.
Where is the MAX379CWG+ pinout?
The MAX379CWG+ pinout is documented in the manufacturer datasheet rather than in the short distributor summaries. The device uses a 24-pin SOIC package, and its exact numbered terminal assignments should be taken from the pin-description table in the Maxim Integrated data sheet. Use that table when connecting supply pins, enable controls, common terminals, and the eight single-ended inputs or four differential pairs.
Can MAX379CWG replace MAX379CWG+?
The MAX379CWG is the closest identified drop-in choice because it uses the same 24-pin SOIC footprint and implements the same two-circuit, 4:1 differential multiplexer function with 3.5 kOhm on-resistance. The ordering-code and orderable-status differences should still be checked against current sourcing requirements before substitution. Confirm temperature grade, marking, lifecycle status, and absolute maximum ratings for the exact replacement lot.
What can replace MAX379CWG+?
The MAX379CWG is the identified same-package replacement for MAX379CWG+ because both use a 24-pin SOIC package and provide the same two-circuit, 4:1 multiplexing architecture with 3.5 kOhm on-resistance. No verified cross-brand, pin-to-pin equivalent was identified. A functional substitute should not be treated as a drop-in replacement unless its terminal assignments, fault-current behavior, voltage limits, and channel timing match the MAX379.
What is the best Analog Devices equivalent for MAX379CWG+?
The best manufacturer-family equivalent identified is the MAX379CWG because it retains the MAX379 differential multiplexer function and the same 24-pin SOIC footprint. The MAX379CWG+ adds the explicit plus ordering designation but does not change the fundamental 3.5 kOhm, two-4:1-circuit architecture described in the manufacturer documentation. No cross-brand part was verified as pin-compatible, so a second source requires a separate engineering review.
MAX379CWG+ vs MAX379CWG - which is better for industrial instrumentation?
Choose MAX379CWG+ when the exact manufacturer ordering code, current documentation, and sourcing status are important, and choose MAX379CWG when its availability, grade, and qualification are confirmed for the intended installation. Both provide the same core function: two 4:1 differential-multiplexer circuits, 3.5 kOhm on-resistance, and a 24-pin SOIC footprint. The final choice should also consider operating temperature and lifecycle requirements.
When should I choose MAX379CWG+ over MAX378CWG+?
Choose MAX379CWG+ when the design must route differential pairs because the device implements two 4:1 circuits and four differential channels. Choose the MAX378CWG+ for an eight-channel single-ended 1-of-8 multiplexing arrangement. Although both belong to the fault-protected MAX378/MAX379 family, they present different signal architectures and should not be treated as direct pin-for-pin substitutes without a careful board-level comparison.
Is MAX379CWG+ suitable for automated test equipment?
The MAX379CWG+ is suitable for automated test-equipment signal routing when the selected signal range and source impedance are compatible with its 3.5 kOhm on-resistance and absolute maximum ratings. Its two 4:1 circuits allow multiple paired inputs to share downstream measurement channels, reducing connector and routing requirements. The non-powered fault condition is especially useful in systems where sources may remain energized during partial power-down.
How should MAX379CWG+ be decoupled and laid out?
Place the MAX379CWG+ close to the shared analog bus and follow the manufacturer datasheet for the exact input, output, and supply capacitance values. Keep the ground connection short to a stable ground plane, avoid routing multiplexed signals near noisy switching nodes, and use the recommended supply bypass capacitor at each device. Maintain controlled trace lengths where timing, leakage, or crosstalk behavior is important.
What should engineers know about MAX379CWG+ thermal and power limits?
The MAX379CWG+ power dissipation must be evaluated from the actual dual-supply voltages, selected-channel on-resistance, and load current rather than from a nominal output-current description. The 3.5 kOhm on-resistance means that channel conduction can dissipate meaningful heat at higher current levels. Use the manufacturer absolute maximum ratings and operating-temperature limits, plus the package thermal information, to set safe current and ambient-temperature conditions.
Is MAX379CWG+ currently in production, and how do I request a quote?
The MAX379CWG+ is listed by the manufacturer as a production part. Current commercial availability, order quantity, and lead time should be confirmed through the Request a Quote form on this page rather than from an embedded static price. Provide the exact MAX379CWG+ ordering code, target quantity, delivery location, and required grade or traceability information with the request.

داده‌های مرجع مهندسی برای MAX379CWG+ — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose MAX379CWG+ when the design requires four differential channels implemented as two 4:1 circuits and values the explicit manufacturer ordering code for production traceability. Choose MAX379CWG when its lifecycle, temperature grade, and sourcing conditions are confirmed and its same 24-pin SOIC footprint makes it the practical replacement for the plus ordering code. The MAX378CWG+ serves a different need: its single-ended eight-channel architecture is appropriate when individual, unpaired signals must be selected. Treat MAX379CWG and MAX379CWG+ as the closest alternatives because both retain the 3.5 kOhm differential-multiplexer function. Before final substitution, verify supply range, absolute maximum input voltage, operating temperature, switching timing, leakage, and fault-current behavior from the manufacturer datasheet. Also confirm that 3.5 kOhm is acceptable for the source impedance and downstream measurement circuit.

مقایسه با جایگزین‌ها

پارامتر این محصول MAX379CWG
Package 24-pin SOIC 24-pin SOIC
Brand Maxim Integrated Maxim Integrated
Number of Circuits 2 circuits 2 circuits
Multiplexer Configuration 4:1 per circuit 4:1 per circuit
Differential Channel Count 4 channels 4 channels
On-Resistance 3.5 kOhm 3.5 kOhm
Signal Architecture Differential Differential
Fault Protection High-voltage, fault-protected High-voltage, fault-protected
Internal Switching Structure Series N-channel/P-channel/N-channel Series N-channel/P-channel/N-channel

تفاوت‌های کلیدی

  • Differential routing with fault protection (در مقابلMAX378CWG+)
  • Exact 3.5 kOhm on-resistance class (در مقابلMAX379CWG)
  • Shutdown fault-path control (در مقابلMAX379CWG)

یادداشت‌های طراحی

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The MAX379CWG+T listing identifies the tape-and-reel ordering option as RoHS compliant, but an exact compliance statement for MAX379CWG+ was not identified. Compliance values for the exact target order code therefore remain unknown.

تاریخ تأیید داده‌ها: 2026-11-14 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

MAX379CWG+ datasheet MAX379CWG+ pinout MAX379CWG+ datasheet pdf MAX379CWG+ schematic MAX379CWG+ equivalent MAX379CWG+ replacement MAX379CWG+ cross reference MAX379CWG+ footprint MAX379CWG+ price MAX379CWG+ stock Maxim Integrated MAX379CWG+ MAX379 24-SOIC pinout MAX379CWG+ vs MAX379CWG MAX379CWG+ application circuit MAX379 differential multiplexer

قطعات و اصطلاحات مرتبط

Maxim Integrated MAX379CWG+ MAX379CWG MAX379CWG+T MAX378 MAX379 analog multiplexer differential multiplexer interface IC semiconductor 2-of-8 multiplexer fault-protected multiplexer high-voltage switching 4:1 multiplexer 24-pin SOIC SOIC package family surface mount SMD on-resistance 3.5 kOhm differential channel N-channel switch P-channel switch series N-channel/P-channel/N-channel structure fault current automated test equipment data acquisition signal conditioning
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ