MAX379CWG+ - Fault-Protected 4:1 Multiplexer | Maxim Integrated
MPN: MAX379CWG+ ✓ Hoạt độngMAX379CWG+ Tóm tắt
An analog multiplexer is an interface IC that connects multiple signal paths to a smaller number of shared pins. The MAX379 belongs to the broader multiplexer hierarchy, where its differential 4:1 architecture reduces the number of external connections required by a system with several paired inputs. This is particularly useful when board space, connector count, or routing complexity must be controlled without sacrificing selectable signal channels.
Key features include two independent 4:1 circuits, 3.5 kOhm on-resistance, an eight-channel high-voltage fault-protected configuration, and operation from dual supply rails. The manufacturer describes the implementation as a series N-channel, P-channel, and N-channel structure. This arrangement provides meaningful fault protection by turning the channels off when the supplies are removed while signal inputs can still be present, limiting unintended current paths.
The MAX379CWG+ is a differential rather than single-ended multiplexer. Each selected channel can carry a pair of related signals, supporting balanced measurement, instrumentation, or test systems where signal polarity and common-mode behavior matter. Its 24-pin SOIC footprint is a surface-mount package intended for conventional PCB assembly, while the operating limits and exact channel ratings should be checked against the manufacturer datasheet before using it outside laboratory voltages.
Typical uses include automated test equipment, data-acquisition systems, industrial control interfaces, oscilloscope input routing, and multichannel sensor conditioning. It is particularly appropriate when multiple high-impedance sources must be connected to downstream instrumentation. Designers should account for the 3.5 kOhm on-resistance, assess leakage and off-channel behavior, and ensure that external circuitry keeps faulted inputs within the absolute maximum ratings.
For a robust layout, place the device close to the multiplexer bus and use a quiet ground-plane connection. Signal traces should avoid crossing high-current switching paths, and unused inputs should be handled according to the datasheet guidance. Supply decoupling must follow the manufacturer recommendation, while external series resistance may be needed to limit fault current in higher-energy systems.
This product summary combines the manufacturer's device description with package, interface, and application analysis, helping engineers identify whether the MAX379CWG+ provides the required differential channel count and fault-protected behavior. The accompanying comparison, pinout, sourcing, and design guidance make the selection process more practical than a basic distributor listing alone.
Bộ thay thế dễ dàng lắp đặt cho MAX379CWG+ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
MAX379CWG
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MAX379CWG+ Thông số kỹ thuật
| Number of Circuits | 2 circuits |
| Multiplexer Configuration | 4:1 per circuit |
| Total Differential Channels | 4 channels |
| Input Architecture | 8 single-ended inputs configured as 4 differential channels |
| On-Resistance | 3.5 kOhm |
| Signal Configuration | Differential |
| Fault Protection | High-voltage, fault-protected |
| Internal Switching Structure | Series N-channel/P-channel/N-channel structure |
| Off-State Behavior | Channels turn off when the power supplies are turned off while input voltages remain applied |
| Hộp | 24-pin SOIC |
| Package Type | Surface mount |
Hướng dẫn cấu hình chân MAX379CWG+ surface mount
Cấu hình chân cho MAX379CWG+ (surface mount gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho MAX379CWG+.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MAX379CWG+ phù hợp cho 6 Áp dụngs: Automated Test Equipment Signal Routing, Data Acquisition and Sensor Conditioning, Oscilloscope and Measurement Front Ends, Industrial Control Interface Multiplexing, High-Voltage Signal Conditioning, Medical and Laboratory Instrument Inputs.
Automated Test Equipment Signal Routing
The MAX379CWG+ fits automated test systems that must route several paired measurement sources through a limited number of downstream instruments. Its two 4:1 circuits provide four selectable differential channels, while the 3.5 kOhm on-resistance must be included in the source-impedance and sensitivity budget. The fault-protected architecture is valuable when a tested source can remain energized during partial system power-down, because channels turn off when device power is removed. Place the multiplexer near the shared analog bus and account for leakage, off-channel isolation, and switching transients in the instrument front end.
Được đề xuất
Data Acquisition and Sensor Conditioning
The MAX379CWG+ can reduce connection count in multichannel data-acquisition systems by selecting among four differential input pairs. Its differential organization is advantageous when the source produces balanced or closely related signals, while two independent 4:1 sections allow separate groups of channels to share downstream analog front ends. The 3.5 kOhm on-resistance can be material when the source has high output impedance, so designers should verify that the selected sensor and amplifier retain sufficient bandwidth and signal-to-noise performance. Decoupling and grounding should follow the manufacturer reference circuit.
Được đề xuất
Oscilloscope and Measurement Front Ends
The MAX379CWG+ is suitable for routing multiple differential inputs into oscilloscope or precision measurement front ends where channel sharing is necessary. Two 4:1 sections provide four selectable paired inputs, and the high-voltage fault-protection feature helps control unintended paths if a signal remains applied while the multiplexer is unpowered. The 3.5 kOhm on-resistance should be compared with the complete front-end input impedance rather than considered in isolation. Short traces, a continuous ground reference, and placement close to the measurement path help limit added capacitance, crosstalk, and pickup.
Được đề xuất
Industrial Control Interface Multiplexing
The MAX379CWG+ can serve as a controlled analog selector in industrial interfaces that must compare or distribute several differential signals to a common processing path. Its dual 4:1 topology gives engineers more routing flexibility than a single selector, and the 24-pin SOIC package supports conventional surface-mount assembly. Because industrial signals may experience transients or remain present during shutdown, the external protection network and applied voltages must be checked against the device's absolute maximum ratings. Robust grounding, controlled return paths, and careful isolation from motor and switching nodes are essential for reliable operation.
Được đề xuất
High-Voltage Signal Conditioning
The MAX379CWG+ is appropriate for signal-conditioning systems that require a high-voltage, fault-protected switching element. The manufacturer's MAX379 description emphasizes that all channels turn off when the power supplies are inadvertently turned off while input voltages are still applied, limiting unintended current flow through the switching network. This behavior supports safer partial-power-down conditions, although it does not replace external fusing or overvoltage protection. The input range, off leakage, and fault-current limits must be verified from the manufacturer datasheet before selecting external resistors, clamps, and protection devices.
Được đề xuất
Medical and Laboratory Instrument Inputs
The MAX379CWG+ can support channel selection in laboratory and medical instrumentation where multiple differential sensor outputs must reach a common amplifier or converter. The differential architecture preserves the relationship between signal pairs, and the two independent 4:1 circuits allow flexible source grouping. Designers must include the 3.5 kOhm on-resistance in the complete source-and-amplifier noise budget and confirm that leakage and switching behavior satisfy the required measurement accuracy. For patient-connected systems, an appropriately rated isolation and protection strategy remains necessary; the multiplexer itself is not an isolation barrier.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MAX379CWG+ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MAX379CWG |
|---|---|---|
| Package | 24-pin SOIC | 24-pin SOIC |
| Brand | Maxim Integrated | Maxim Integrated |
| Number of Circuits | 2 circuits | 2 circuits |
| Multiplexer Configuration | 4:1 per circuit | 4:1 per circuit |
| Differential Channel Count | 4 channels | 4 channels |
| On-Resistance | 3.5 kOhm | 3.5 kOhm |
| Signal Architecture | Differential | Differential |
| Fault Protection | High-voltage, fault-protected | High-voltage, fault-protected |
| Internal Switching Structure | Series N-channel/P-channel/N-channel | Series N-channel/P-channel/N-channel |
Bảo phân biệt quan trọng
- Differential routing with fault protection (vsMAX378CWG+)
- Exact 3.5 kOhm on-resistance class (vsMAX379CWG)
- Shutdown fault-path control (vsMAX379CWG)
Ghi chú thiết kế
Thông tin tuân thủ
The MAX379CWG+T listing identifies the tape-and-reel ordering option as RoHS compliant, but an exact compliance statement for MAX379CWG+ was not identified. Compliance values for the exact target order code therefore remain unknown.