NXP Semiconductors

MC145483FC - 13-Bit PCM Codec-Filter | NXP | Audio Interface

MPN: MC145483FC ✗ پایان تولید
3 V Vdss 32-pin HVQFN (5 x 5 mm) with exposed pad Package
حداقل سفارش: 1 |

MC145483FC نمای کلی

The NXP MC145483FC is a 13-bit linear PCM codec-filter with one ADC, one DAC, and 2s-complement PCM data, packaged in a 32-pin HVQFN (5 x 5 mm) with an exposed pad. It operates from a 3 V supply and is specified for an industrial temperature range of -40°C to 85°C. The device is designed for single-channel digital-audio conversion where compact implementation, direct PCM connectivity, and a low-pin-count surface-mount package are important.

A PCM codec-filter is a semiconductor that converts between analog audio and linear pulse-code-modulation samples. The MC145483FC belongs to the broader codec and filter hierarchy, which falls under audio interface integrated circuits and, more generally, interface semiconductors. Its ADC accepts an analog audio input, while its DAC reconstructs an analog output from digital PCM data. The 13-bit linear format gives 4096 amplitude steps in each coded direction and represents audio using two's-complement samples.

The codec-filter architecture integrates signal-path conversion functions needed to connect an analog audio source or destination to a digital audio system. The MC145483FC uses a 13-bit resolution and supports the 3 V supply identified for the component. Its 32-terminal HVQFN package reduces board area compared with many older leaded or narrow-outline codec packages, while the exposed thermal pad improves heat transfer through the PCB. The package is suitable for surface-mount assembly and industrial-temperature equipment.

The principal engineering benefit is a dedicated single-channel conversion solution rather than a general-purpose codec with many configurable functions. This can simplify firmware, reduce analog routing, and preserve a direct PCM interface in equipment such as telephony terminals, industrial audio modules, and embedded voice systems. Designers should still validate signal levels, clocking, data format, and power sequencing against the manufacturer's application guidance before releasing a PCB.

Typical uses include single-channel voice processing, digital audio interface modules, compact industrial controllers, and telecommunications equipment. The industrial temperature rating makes the device suitable for applications with controlled but non-consumer operating environments. A system requiring stereo conversion, multiple codec channels, or a modern high-resolution digital audio interface will generally need a different codec architecture.

Layout is critical because the exposed pad must be connected to the appropriate supply or ground plane as specified in the manufacturer datasheet. Place required bypass capacitors close to their associated pins, keep analog and digital return currents controlled, and route high-current digital and clock traces away from the analog input and output nodes. Use the package land pattern and exposed-pad geometry from the manufacturer drawing rather than estimating solder-land dimensions.

This page combines the device's 13-bit PCM architecture, 1/1 ADC-DAC configuration, 3 V operation, industrial temperature range, package details, practical replacement guidance, and PCB implementation considerations. It also distinguishes documented compatibility from generic codec substitutions, helping engineers determine whether a candidate preserves the footprint, pin functions, and signal interface before committing to a redesign.

جایگزین‌های drop-in برای MC145483FC — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

هیچ جایگزین مستقیمی برای این محصول موجود نیست.

درخواست جایگزین

MC145483FC حداکثر مقادیر مجاز و مشخصات الکتریکی

Device Type Linear PCM codec-filter
Converter Configuration 1 ADC and 1 DAC
رزولوشن 13 bit
PCM Data Format 2s complement linear PCM
ولتاژ تغذیه 3 V
دمای کاری -40°C to 85°C
Temperature Grade Industrial
بسته‌بندی 32-pin HVQFN (5 x 5 mm) with exposed pad
Terminal Count 32 terminals
Package Code HVQCCN
نوع نصب Surface mount
Terminal Form No lead
Package Shape Square

راهنمای پیکربندی پین MC145483FC square

پیکربندی پین برای MC145483FC (پکیج square). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج square برای MC145483FC

داده پین‌آوت تفصیلی موجود نیست برای MC145483FC.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MC145483FC مناسب است برای 6 کاربردs: Single-Channel Voice Processing, Industrial Audio Interface Module, Telecommunications Terminal Audio, Digital Audio Monitoring System, Embedded Controller Audio Port, Data Acquisition Front End.

🎧

Single-Channel Voice Processing

The MC145483FC suits a single-channel voice-processing path because it combines one ADC and one DAC with a 13-bit linear PCM interface. The 2s-complement format supports direct integration with digital signal processors, microcontrollers, or telephony controllers capable of handling the required clocking and framing. Operating from 3 V and across -40°C to 85°C also fits compact industrial voice terminals. Designers should confirm input sensitivity, output loading, and supported sample timing against the manufacturer datasheet.

🏭

Industrial Audio Interface Module

The MC145483FC provides a compact analog-to-digital and digital-to-analog conversion function for industrial audio interface modules. Its 32-pin HVQFN package measures 5 x 5 mm, allowing a small board footprint, while the exposed pad supports PCB heat dissipation. The 3 V supply and -40°C to 85°C industrial range align with embedded control and monitoring equipment. Layout must preserve low-noise analog grounding while keeping digital clock and data routes away from sensitive audio nodes.

🌐

Telecommunications Terminal Audio

The MC145483FC is applicable to compact telecommunications terminals requiring one analog microphone input and one analog audio output. Its 13-bit linear PCM conversion and 2s-complement data format provide a straightforward interface to digital speech-processing hardware, while the 3 V operating point supports low-voltage embedded systems. The industrial temperature range covers controlled telecommunications environments. System-level acoustic performance still depends on microphone biasing, analog gain, clock accuracy, and mechanical noise control.

📺

Digital Audio Monitoring System

The MC145483FC can form the audio conversion front end of a digital monitoring system, converting one analog channel to PCM for processing and reconstructing one analog monitoring channel from digital samples. Its compact 32-pin HVQFN package leaves board area available for communications and storage electronics, while the 3 V supply simplifies integration with modern embedded logic. Use careful analog partitioning and low-impedance grounding to prevent converter activity from disturbing adjacent measurement circuitry.

🧩

Embedded Controller Audio Port

The MC145483FC can provide an embedded controller or digital signal processor with a dedicated 13-bit PCM audio port. Converting analog audio inside the controller enclosure shortens the external signal path and reduces dependence on a larger general-purpose codec. The device's one-ADC, one-DAC arrangement is appropriate for command tones, status audio, or a single voice channel rather than full stereo playback. Firmware must match the codec's 2s-complement data convention and required timing format.

🔧

Data Acquisition Front End

The MC145483FC can serve as the audio conversion stage in a compact data-acquisition front end that captures a single analog input and returns a reconstructed analog output. The 13-bit resolution and 3 V operation make it suitable for legacy measurement systems designed around linear PCM data. Its small HVQFN package preserves board area for sensors, isolation, and communications. Validation should include gain, offset, distortion, noise, clock jitter, and simultaneous-conversion behavior under the intended input range.

What is the MC145483FC?
The MC145483FC is a single-channel 13-bit linear PCM codec-filter with one ADC and one DAC. According to the NXP manufacturer datasheet, it accepts analog audio for digital conversion and reconstructs analog audio from 2s-complement PCM data. The device uses a 3 V supply and is offered in a 32-pin HVQFN package with an exposed pad for a compact industrial-temperature implementation.
What are the key specifications of MC145483FC that engineers should know?
The MC145483FC provides 13-bit conversion, one ADC channel, one DAC channel, 2s-complement linear PCM formatting, and 3 V operation. The NXP manufacturer datasheet identifies a 32-pin HVQFN package measuring 5 x 5 mm, with an exposed pad and a -40°C to 85°C operating range. It is a dedicated single-channel codec-filter rather than a configurable multichannel audio codec.
What package does MC145483FC use?
The MC145483FC uses a 32-pin HVQFN package measuring 5 x 5 mm. According to the NXP manufacturer datasheet and product listing, the package includes an exposed pad and uses no-lead surface-mount terminals. The package code is HVQCCN, and the exposed-pad land pattern must be taken directly from the manufacturer package drawing.
Where can I download the MC145483FC datasheet PDF?
The official MC145483FC datasheet PDF is available from NXP at https://www.nxp.com/mcds/MC145483FC.pdf. The manufacturer document provides the electrical characteristics, signal descriptions, application information, and package drawing needed to assign PCB connections. Use the NXP copy for production design decisions because third-party document mirrors may reflect an earlier product revision.
Where can I find the MC145483FC pinout?
The MC145483FC pinout is found in the pin-description and package-drawing sections of the NXP manufacturer datasheet. The component has 32 terminals in an HVQCCN square package, including an exposed pad that is not a conventional signal terminal. Assign every connection from the numbered package drawing and verify the exposed-pad net against the recommended land pattern.
Can MC145483FC be used for industrial audio equipment?
Yes, the MC145483FC is specified for an industrial operating range of -40°C to 85°C. Its 3 V analog supply and single ADC/DAC architecture suit compact industrial voice and audio modules. The manufacturer datasheet should also be consulted for supply tolerances, input levels, clock requirements, and power-consumption limits before the device is approved for a specific enclosure or system.
Is MC145483FC the same as MC145483DT?
No, the MC145483FC and MC145483DT do not share the same package and therefore are not direct drop-in equivalents. The MC145483FC is associated with a 32-pin HVQFN package, while the MC145483DT is a distinct package variant. A board intended for MC145483FC requires the HVQCCN land pattern and pin assignments, so replacing it with MC145483DT would require a PCB redesign.
What is the best drop-in replacement for MC145483FC?
No verified drop-in replacement for the MC145483FC was identified. The MC145483DT is a related member of the codec family, but its package differs from the MC145483FC's 32-pin HVQFN configuration and it is not pin-to-pin compatible on the same footprint. For a board already laid out around MC145483FC, retain that footprint or plan a deliberate PCB redesign rather than relying on a generic codec substitution.
What can replace MC145483FC on an existing PCB?
An existing MC145483FC PCB generally requires a device with the same HVQCCN footprint and matching terminal functions. No candidate satisfying both mechanical and electrical drop-in requirements was identified in the manufacturer or cross-reference material. Treat a conversion to MC145483DT or a modern multichannel codec as a redesign, including footprint, pin mapping, clocking, analog levels, firmware, and validation.
When should I choose MC145483FC over a modern audio codec?
Choose the MC145483FC when a legacy design specifically requires its 13-bit 2s-complement PCM interface, single ADC/DAC arrangement, 3 V operation, and established HCQFN-style board layout. A modern codec is preferable for new products needing higher resolution, stereo or multichannel support, lower power, digital microphones, current-voltage output, or newer software-controlled interfaces. Legacy continuity normally outweighs generic feature comparisons.
Is MC145483FC suitable for a single-channel voice interface?
Yes, the MC145483FC is well matched to a single-channel voice interface because it combines one ADC and one DAC with 13-bit linear PCM conversion. According to the NXP manufacturer datasheet, the data format is 2s complement and the supply voltage is 3 V. Its -40°C to 85°C range also supports industrial voice terminals, provided the clock, gain, and signal-level requirements are satisfied.
Where can I buy MC145483FC online?
Use the Request a Quote form on this page to request the MC145483FC and request current stock, minimum order quantity, lead time, and obsolete-part sourcing options. Because this is an older interface IC, availability may depend on original inventory, controlled surplus, or qualified legacy sourcing. The request form provides a direct path for current commercial terms without relying on stale catalog pricing.
What is the price of MC145483FC?
The MC145483FC is handled as a legacy or obsolete component, so current pricing requires a quotation. Submit the exact MPN, required quantity, and target package through the Request a Quote form on this page. The inquiry can confirm current availability, inspection requirements, and delivery terms, which are more useful than an outdated catalog amount for a component of this age.
What is the lead time for MC145483FC?
The current MC145483FC lead time must be confirmed through the Request a Quote form on this page. Lead time can vary substantially for legacy integrated circuits depending on original stock, lot traceability, production status, and whether the quantity is available directly or through controlled sourcing. Include your required schedule and annual usage so the supplier can quote a realistic allocation.
Is MC145483FC in stock?
MC145483FC availability is not represented as guaranteed stock on this page. Use the Request a Quote form to request the current quantity, lot condition, and expected lead time for the exact 32-pin HVQFN ordering code. Because the device is a mature codec-filter, buyers should also assess whether a redesign to a currently supported audio codec would provide a more sustainable supply path.
What is the best NXP equivalent for MC145483FC?
No confirmed NXP drop-in equivalent for the MC145483FC was identified. The related MC145483DT does not satisfy the same-package requirement, so it is not a direct substitution for an existing board. For an uninterrupted design, request the exact MC145483FC through the quote form; for a new design, compare current NXP audio codecs against resolution, channel count, interface format, supply voltage, and package.

داده‌های مرجع مهندسی برای MC145483FC — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the MC145483FC when maintaining an established design that requires a 13-bit linear PCM codec-filter, one ADC, one DAC, 3 V operation, and the 32-pin HVQFN footprint. It is particularly suitable for legacy single-channel voice, monitoring, and industrial audio modules where the software and PCB already match its 2s-complement data interface and exposed-pad construction. MC145483DT is a related family member but uses a different package, so it is not appropriate for a no-change PCB replacement. For new products, compare the MC145483FC with currently supported codecs when higher resolution, multiple channels, lower power, digital microphones, or modern bus interfaces are required. A new codec generally offers stronger lifecycle assurance and broader application support, but it also requires footprint, schematic, firmware, and signal-chain redesign. When continuity is mandatory, specify the exact MC145483FC ordering code and confirm lot condition and availability through a formal sourcing request.

یادداشت‌های طراحی

Use the NXP package drawing to define the 32-pin HVQFN land pattern and exposed-pad geometry. Place analog bypass capacitors close to their specified supply pins, connect the exposed pad to the net directed by the manufacturer, and provide adequate thermal-via coverage. Do not derive pad dimensions from a generic 5 x 5 mm QFN footprint because pad and mask geometry can differ by package code.

Treat the 13-bit, 2s-complement PCM format as a fixed part of the hardware interface. Confirm bit alignment, sign convention, clock polarity, and framing in both the transmitter and receiver before layout is frozen. MC145483DT is not a footprint-compatible substitute for MC145483FC, so using it without changing the board and software creates both mechanical and functional risks.

Separate the analog input and output paths from digital clock and PCM data routes. Keep analog traces short, use a continuous ground reference beneath the analog section, and route noisy return currents away from the converter pins. Validate the completed board for idle-channel noise, clock-related interference, and gain error with the actual external circuitry; a correct schematic alone does not ensure acceptable analog performance.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The manufacturer material provides product and material declarations, but the available product summaries do not establish a complete RoHS, REACH, lead-free, halogen-free, or conflict-minerals compliance classification for this ordering code.

تاریخ تأیید داده‌ها: 2026-11-16 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

MC145483FC datasheet MC145483FC datasheet pdf MC145483FC pinout MC145483FC 32 HVQFN MC145483FC specifications MC145483FC 13 bit codec MC145483FC PCM interface MC145483FC equivalent MC145483FC drop-in replacement MC145483FC vs MC145483DT NXP MC145483FC MC145483FC price MC145483FC stock

قطعات و اصطلاحات مرتبط

NXP Semiconductors MC145483FC MC145483DT PCM codec-filter linear PCM codec audio codec analog-to-digital converter ADC digital-to-analog converter DAC 13-bit resolution 2s-complement PCM HVQFN-32 HVQCCN QFN family surface mount exposed pad single-channel audio industrial temperature grade 3 V power supply voice processing telecommunications industrial audio digital monitoring
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ