MC145483FC - 13-Bit PCM Codec-Filter | NXP | Audio Interface
MPN: MC145483FC ✗ 停產MC145483FC 概覽
A PCM codec-filter is a semiconductor that converts between analog audio and linear pulse-code-modulation samples. The MC145483FC belongs to the broader codec and filter hierarchy, which falls under audio interface integrated circuits and, more generally, interface semiconductors. Its ADC accepts an analog audio input, while its DAC reconstructs an analog output from digital PCM data. The 13-bit linear format gives 4096 amplitude steps in each coded direction and represents audio using two's-complement samples.
The codec-filter architecture integrates signal-path conversion functions needed to connect an analog audio source or destination to a digital audio system. The MC145483FC uses a 13-bit resolution and supports the 3 V supply identified for the component. Its 32-terminal HVQFN package reduces board area compared with many older leaded or narrow-outline codec packages, while the exposed thermal pad improves heat transfer through the PCB. The package is suitable for surface-mount assembly and industrial-temperature equipment.
The principal engineering benefit is a dedicated single-channel conversion solution rather than a general-purpose codec with many configurable functions. This can simplify firmware, reduce analog routing, and preserve a direct PCM interface in equipment such as telephony terminals, industrial audio modules, and embedded voice systems. Designers should still validate signal levels, clocking, data format, and power sequencing against the manufacturer's application guidance before releasing a PCB.
Typical uses include single-channel voice processing, digital audio interface modules, compact industrial controllers, and telecommunications equipment. The industrial temperature rating makes the device suitable for applications with controlled but non-consumer operating environments. A system requiring stereo conversion, multiple codec channels, or a modern high-resolution digital audio interface will generally need a different codec architecture.
Layout is critical because the exposed pad must be connected to the appropriate supply or ground plane as specified in the manufacturer datasheet. Place required bypass capacitors close to their associated pins, keep analog and digital return currents controlled, and route high-current digital and clock traces away from the analog input and output nodes. Use the package land pattern and exposed-pad geometry from the manufacturer drawing rather than estimating solder-land dimensions.
This page combines the device's 13-bit PCM architecture, 1/1 ADC-DAC configuration, 3 V operation, industrial temperature range, package details, practical replacement guidance, and PCB implementation considerations. It also distinguishes documented compatibility from generic codec substitutions, helping engineers determine whether a candidate preserves the footprint, pin functions, and signal interface before committing to a redesign.
直接替換替代品,適用於 MC145483FC — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此產品無可直接替換的替代品。
申請替代品MC145483FC 最大額定值與電氣特性
| Device Type | Linear PCM codec-filter |
| Converter Configuration | 1 ADC and 1 DAC |
| 解析度 | 13 bit |
| PCM Data Format | 2s complement linear PCM |
| 供應電壓 | 3 V |
| 工作溫度 | -40°C to 85°C |
| Temperature Grade | Industrial |
| 封裝 | 32-pin HVQFN (5 x 5 mm) with exposed pad |
| Terminal Count | 32 terminals |
| Package Code | HVQCCN |
| 安裝類型 | Surface mount |
| Terminal Form | No lead |
| Package Shape | Square |
MC145483FC square 腳位配置指南
MC145483FC(square 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MC145483FC.
請參閱 資料表 以查看完整腳位配置。
典型應用
MC145483FC 適用於 6 應用s: Single-Channel Voice Processing, Industrial Audio Interface Module, Telecommunications Terminal Audio, Digital Audio Monitoring System, Embedded Controller Audio Port, Data Acquisition Front End.
Single-Channel Voice Processing
The MC145483FC suits a single-channel voice-processing path because it combines one ADC and one DAC with a 13-bit linear PCM interface. The 2s-complement format supports direct integration with digital signal processors, microcontrollers, or telephony controllers capable of handling the required clocking and framing. Operating from 3 V and across -40°C to 85°C also fits compact industrial voice terminals. Designers should confirm input sensitivity, output loading, and supported sample timing against the manufacturer datasheet.
推薦
Industrial Audio Interface Module
The MC145483FC provides a compact analog-to-digital and digital-to-analog conversion function for industrial audio interface modules. Its 32-pin HVQFN package measures 5 x 5 mm, allowing a small board footprint, while the exposed pad supports PCB heat dissipation. The 3 V supply and -40°C to 85°C industrial range align with embedded control and monitoring equipment. Layout must preserve low-noise analog grounding while keeping digital clock and data routes away from sensitive audio nodes.
推薦
Telecommunications Terminal Audio
The MC145483FC is applicable to compact telecommunications terminals requiring one analog microphone input and one analog audio output. Its 13-bit linear PCM conversion and 2s-complement data format provide a straightforward interface to digital speech-processing hardware, while the 3 V operating point supports low-voltage embedded systems. The industrial temperature range covers controlled telecommunications environments. System-level acoustic performance still depends on microphone biasing, analog gain, clock accuracy, and mechanical noise control.
推薦
Digital Audio Monitoring System
The MC145483FC can form the audio conversion front end of a digital monitoring system, converting one analog channel to PCM for processing and reconstructing one analog monitoring channel from digital samples. Its compact 32-pin HVQFN package leaves board area available for communications and storage electronics, while the 3 V supply simplifies integration with modern embedded logic. Use careful analog partitioning and low-impedance grounding to prevent converter activity from disturbing adjacent measurement circuitry.
推薦
Embedded Controller Audio Port
The MC145483FC can provide an embedded controller or digital signal processor with a dedicated 13-bit PCM audio port. Converting analog audio inside the controller enclosure shortens the external signal path and reduces dependence on a larger general-purpose codec. The device's one-ADC, one-DAC arrangement is appropriate for command tones, status audio, or a single voice channel rather than full stereo playback. Firmware must match the codec's 2s-complement data convention and required timing format.
推薦
Data Acquisition Front End
The MC145483FC can serve as the audio conversion stage in a compact data-acquisition front end that captures a single analog input and returns a reconstructed analog output. The 13-bit resolution and 3 V operation make it suitable for legacy measurement systems designed around linear PCM data. Its small HVQFN package preserves board area for sensors, isolation, and communications. Validation should include gain, offset, distortion, noise, clock jitter, and simultaneous-conversion behavior under the intended input range.
推薦
推薦產品摘要
工程參考資料,適用於 MC145483FC — 比較、設計指引及合規資訊。
選型指南
設計說明
Use the NXP package drawing to define the 32-pin HVQFN land pattern and exposed-pad geometry. Place analog bypass capacitors close to their specified supply pins, connect the exposed pad to the net directed by the manufacturer, and provide adequate thermal-via coverage. Do not derive pad dimensions from a generic 5 x 5 mm QFN footprint because pad and mask geometry can differ by package code.
Treat the 13-bit, 2s-complement PCM format as a fixed part of the hardware interface. Confirm bit alignment, sign convention, clock polarity, and framing in both the transmitter and receiver before layout is frozen. MC145483DT is not a footprint-compatible substitute for MC145483FC, so using it without changing the board and software creates both mechanical and functional risks.
Separate the analog input and output paths from digital clock and PCM data routes. Keep analog traces short, use a continuous ground reference beneath the analog section, and route noisy return currents away from the converter pins. Validate the completed board for idle-channel noise, clock-related interference, and gain error with the actual external circuitry; a correct schematic alone does not ensure acceptable analog performance.
合規資訊
The manufacturer material provides product and material declarations, but the available product summaries do not establish a complete RoHS, REACH, lead-free, halogen-free, or conflict-minerals compliance classification for this ordering code.