Texas Instruments

MC3303DG4 - Quad 30V 1MHz Op Amp | Texas Instruments

MPN: MC3303DG4 ✗ پایان تولید
30 V Vdss 14-SOIC Package
حداقل سفارش: 1 |

MC3303DG4 نمای کلی

The Texas Instruments MC3303DG4 is a quad, general-purpose operational amplifier optimized for low-power operation, with a 1 MHz gain-bandwidth product and operation from a single 3 V to 36 V supply or suitable split supplies. The device is packaged in a 14-pin SOIC measuring 3.90 mm wide and is supplied in a tube. Its four amplifiers make it suitable for signal conditioning, instrumentation, audio, industrial control, and general analog signal-processing systems.

An operational amplifier is a high-gain, high-impedance differential amplifier used to amplify weak signals, buffer inputs, perform active filtering, compare voltages, or drive analog stages. The MC3303 belongs to the broader operational-amplifier hierarchy, combining four independent amplifiers in one integrated circuit to reduce board area and simplify multi-channel designs. Compared with a discrete single amplifier, the quad device provides matched circuitry within one package and a common supply connection.

The MC3303's headline characteristics are four integrated amplifier channels, a 1 MHz gain-bandwidth product, and a 30 V maximum supply-related operating rating in the ordered configuration. The manufacturer identifies it as a low-power amplifier, making it suitable for general-purpose designs that do not require the bandwidth of a modern high-speed amplifier. Its 14-SOIC package supports conventional surface-mount assembly, while the exposed thermal approach is not required because the package does not use a bottom thermal pad.

The product family is described as a quadruple low-power operational amplifier with performance comparable to the uA741 while adding the ability to operate from a single supply over a 3 V to 36 V range. Split-supply operation is also possible when the total voltage between the supply rails remains acceptable. These characteristics make the amplifier applicable to both legacy 24 V industrial systems and lower-voltage circuitry.

Typical uses include four-channel sensor conditioning, low-frequency active filters, audio preamplification, comparator-style threshold circuits, current-to-voltage conversion, and general instrumentation. One package can provide independent gain stages for multiple sensor channels, provided each amplifier is configured with stable feedback compensation and the supply rails meet the required limits.

Designers should review the complete manufacturer pin description and typical application circuit before assigning PCB tracks. Decoupling capacitors should be placed close to the supply pins, input and feedback components should be kept compact, and unused amplifier channels should be configured according to the recommended stable-input method rather than left floating.

This product record combines device status, package details, lifecycle information, sourcing guidance, compatible-family analysis, and practical PCB considerations into a focused engineering reference for designing around the MC3303DG4.

جایگزین‌های drop-in برای MC3303DG4 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای MC3303DG4 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Amplifier Type, Operating Temperature Range, Package, Product Type, RoHS Status.

Texas Instruments
Amplifier Type: General-purpose operational amplifier
Operating Temperature Range: -40°C to +85°C
Package: SOIC (D), 14 pins
مقایسه با MC3303DG4 →
Texas Instruments
Operating Temperature Range: −25 °C to 85 °C
Product Type: Quad operational amplifier
RoHS Status: unknown
مقایسه با MC3303DG4 →

MC3403D

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Texas Instruments
📦 14-SOIC
Quad operational amplifier · 4 circuits · ±2.5 V to ±15 V · 30 V · 1 MHz · 0.6 V/µs · −25 °C to 85 °C · True differential inputs

✓ موجود

$0.4102 / واحد

مشاهده دیتاشیت ←

MC3303DR

✅ جایگزین مستقیم
Texas Instruments
📦 14-SOIC
4 channels · General-purpose operational amplifier · 1 MHz · 30 V · 3 V to 36 V · Class AB · True differential input · Internal

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MC3303DG4 حداکثر مقادیر مجاز و مشخصات الکتریکی

Amplifier Count 4 amplifiers
Product Type Quad general-purpose operational amplifier
Gain-Bandwidth Product 1 MHz
Maximum Supply Rating 30 V
Single-Supply Operating Range 3 V to 36 V
Split-Supply Operation Supported within the applicable total supply-voltage limit
Supply Configuration Single supply or split supply
Amplifier Type General purpose
Power Class Low-power operational amplifier
بسته‌بندی 14-SOIC
Package Width 3.90 mm
Package Width in Inches 0.154 inch
Package Length 3.90 mm
نوع نصب Surface mount
Shipping Package Tube
وضعیت چرخه عمر Obsolete
وضعیت RoHS ROHS3 compliant

پیکربندی پین MC3303DG4

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
پین 1 OUTA — Amplifier A output
پین 2 -INA — Amplifier A inverting input
پین 3 +INA — Amplifier A non-inverting input
پین 4 V- — Negative supply connection
پین 5 +INB — Amplifier B non-inverting input
پین 6 -INB — Amplifier B inverting input
پین 7 OUTB — Amplifier B output
پین 8 OUTC — Amplifier C output
پین 9 -INC — Amplifier C inverting input
پین 10 +INC — Amplifier C non-inverting input
پین 11 V+ — Positive supply connection
پین 12 +IND — Amplifier D non-inverting input
پین 13 -IND — Amplifier D inverting input
پین 14 OUTD — Amplifier D output

کاربردهای معمول

MC3303DG4 مناسب است برای 6 کاربردs: Industrial Sensor Signal Conditioning, Low-Frequency Active Filters, Audio Preamplification, Threshold and Comparator Circuits, Current-to-Voltage Measurement, General Analog Control Interface.

🏭

Industrial Sensor Signal Conditioning

The MC3303DG4 fits four-channel industrial sensor conditioning because its four independent amplifiers can amplify or buffer multiple low-level inputs within one 14-SOIC package. The 1 MHz gain-bandwidth product is suitable for low-frequency process signals, while single-supply operation from 3 V to 36 V supports compatibility with legacy 24 V industrial systems. Each channel should use feedback compensation matched to the intended closed-loop gain. Designers must also verify the input common-mode range against the sensor output and ensure the output swing remains inside the amplifier limits. This device is appropriate for maintaining an existing sensor interface, although its obsolete status should be considered before releasing new production hardware.

🎧

Low-Frequency Active Filters

The four amplifiers in the MC3303DG4 can implement independent active-filter stages for audio, measurement, and control systems. A 1 MHz gain-bandwidth product provides useful bandwidth for low-frequency filters, and the device can operate from a single 3 V to 36 V supply or from split rails where permitted. Practical designs should keep the inverting input and feedback components close together to reduce parasitic coupling, and should verify capacitor and resistor tolerances because they directly determine the filter response. Input bias current and output-drive requirements should also be checked against the selected source impedance and following stage.

🎧

Audio Preamplification

The MC3303DG4 is suitable for modest audio preamplification because each channel provides independent gain and the device is described as a low-power quad operational amplifier. Its 1 MHz gain-bandwidth product is appropriate for audio-band applications rather than high-frequency video or RF tasks. In a four-channel mixer, the amplifiers can support microphone, line, or playback paths while sharing one supply package. The design must account for the output swing, input common-mode range, noise contribution of the feedback network, and stability with the source impedance. A bypass capacitor near the supply connection is recommended to keep supply ripple from coupling into the audio channels.

🔧

Threshold and Comparator Circuits

The MC3303DG4 can implement four threshold-detection or comparator-style functions when the input and output remain within the amplifier's specified common-mode and swing limits. The single-supply range of 3 V to 36 V allows the device to operate from compact 3.3 V systems as well as higher-voltage industrial rails. Feedback should be arranged so the output remains in its linear operating region, because the product is an operational amplifier rather than a dedicated comparator with latch or open-drain output. For a robust design, evaluate noise around the threshold, response time with the selected gain, and the behavior of any unused amplifier channels.

🖥️

Current-to-Voltage Measurement

The MC3303DG4 can provide transimpedance amplification for low-frequency current measurements when the source resistance and feedback network remain within the amplifier's operating limits. Its four-channel arrangement permits several sensors to share a common package while retaining independent feedback paths. A 1 MHz gain-bandwidth product is generally suitable for bandwidth-conscious measurement circuits, but stability must be evaluated with the actual sensor capacitance and feedback resistance. Input bias current can create offset across high-value feedback resistors, so source impedance and bias-current specifications should be checked before scaling the current range. The obsolete lifecycle status makes this configuration most appropriate for maintaining established instrumentation.

⚡

General Analog Control Interface

The MC3303DG4 is well suited to general analog control tasks because four channels can amplify error signals, buffer sensor outputs, or generate control voltages within one package. Its ability to run from a single supply as low as 3 V supports compatibility with legacy control systems, while its 30 V class device rating covers higher-voltage industrial interfaces. Feedback-network components should be selected for stable closed-loop operation at the intended gain, and the amplifier output must remain inside its rated swing. PCB layout should provide a low-impedance ground return and place supply bypassing near pin 11, with careful attention to analog traces near switching circuitry.

What is the MC3303DG4?
The MC3303DG4 is a Texas Instruments quad, low-power, general-purpose operational amplifier with four independent channels, a 1 MHz gain-bandwidth product, and operation from a single 3 V to 36 V supply. The manufacturer product page identifies the MC3303 family as a 30 V, 1 MHz quad operational amplifier, while the MC3303DG4 ordering code places it in a 14-pin SOIC tube package.
Where can I download the MC3303DG4 datasheet PDF?
The official MC3303 datasheet and supporting product information are available from the Texas Instruments MC3303 product page at https://www.ti.com/product/MC3303. The manufacturer page is the preferred source for the complete electrical characteristics, pin descriptions, ordering information, and application guidance needed before designing or qualifying a replacement.
What is the MC3303DG4 pinout?
The MC3303DG4 uses a standard 14-pin SOIC quad-op-amp pinout: pins 1, 7, 8, and 14 are amplifier outputs; pins 2, 6, 9, and 13 are inverting inputs; pins 3, 5, 10, and 12 are non-inverting inputs; pin 4 is V−; and pin 11 is V+. Use the manufacturer pin-description table when making PCB assignments because unused channels still require stable biasing.
What is the operating voltage range of the MC3303DG4?
The MC3303 family operates from a single supply of 3 V to 36 V, and it also supports split-supply operation when the difference between the positive and negative rails remains within the device limit. The ordered MC3303DG4 is identified as a 30 V general-purpose amplifier in distributor records, so system rails should be checked against the manufacturer operating-area guidance.
Is the MC3303DG4 obsolete?
The MC3303DG4 is listed as obsolete. Texas Instruments continues to provide the MC3303 product page and family documentation, but engineers should confirm availability before starting a new production design. For an active replacement, compare the complete electrical limits and pin functions rather than relying only on the package number.
Where can I buy MC3303DG4 online?
Use the “Request a Quote” form on this page to request MC3303DG4 availability, current lead time, and minimum order quantity. Because the exact MPN is marked obsolete, the form is the appropriate route for checking whether any remaining channel stock can be allocated to a production or maintenance order.
What is the price of the MC3303DG4?
Current commercial terms for the MC3303DG4 should be requested through the “Request a Quote” form on this page. The structured price field on this page is intended to be updated automatically, while this FAQ avoids publishing a static unit figure that could become stale for an obsolete catalog part.
What is the lead time for the MC3303DG4?
The current lead time for the MC3303DG4 should be confirmed through the “Request a Quote” form on this page. Lead time can vary with remaining factory inventory, order quantity, tube packaging, and shipment destination, so it should not be assumed from a general stock count or from the product's obsolete status.
Is MC3303DG4 in stock?
Current stock for the obsolete MC3303DG4 should be checked through the “Request a Quote” form on this page. A listing that shows a quantity does not necessarily mean that quantity is freely available, so request the desired quantity, target date, packaging requirement, and shipping destination before committing the component to a schedule.
What can replace the MC3303DG4?
The MC3403D is the closest identified same-family candidate because it is a 14-pin SOIC quad operational amplifier with closely related 30 V-class performance. It should not be treated as an automatic substitution until the complete MC3403 electrical data are checked for input common-mode range, output swing, offset, bias current, noise, and supply-current requirements.
Is the MC3403D the same as the MC3303DG4?
The MC3403D is not simply a different order code for the MC3303DG4; it is the related MC3403 family member. It may serve as a pin-compatible design option because both are 14-pin SOIC quad amplifiers, but engineers must compare the manufacturer specifications for offset voltage, bias current, bandwidth, slew rate, common-mode range, and output drive before substitution.
MC3303DG4 vs MC3403D: which is better for a low-frequency signal chain?
The MC3303DG4 and MC3403D are both suitable starting points for a 1 MHz-class general-purpose quad amplifier in a 14-pin SOIC footprint, but neither is universally better. Choose based on the required common-mode range, output swing, offset, noise, slew rate, supply current, and operating temperature; the MC3303 is the target part for an exact-fit redesign.
When should I choose MC3303DG4 over an alternative?
Choose the MC3303DG4 when an existing design was qualified specifically around that ordering code and redesigning the board would create unnecessary risk. For a new design, choose an alternative only after confirming the same 14-pin SOIC footprint, four-channel pin functions, supply range, input/output ranges, and application performance; obsolete lifecycle status can make an active alternative more practical.
Is the MC3303DG4 suitable for industrial sensor conditioning?
The MC3303DG4 is technically suited to low-frequency industrial sensor conditioning because it provides four channels, a 1 MHz gain-bandwidth product, and single-supply operation from 3 V to 36 V. The amplifier must remain within its input common-mode and output-swing limits, and the obsolete status should be addressed before a new production release.
What are the key specifications of MC3303DG4 that engineers should know?
The principal engineering facts are four general-purpose amplifier channels, a 1 MHz gain-bandwidth product, a 30 V device rating, single-supply operation from 3 V to 36 V, and a 14-pin SOIC package supplied in a tube. Texas Instruments classifies the family as a low-power quad operational amplifier. Detailed offset, bias, noise, slew-rate, common-mode, and temperature limits should be taken from the manufacturer datasheet.

داده‌های مرجع مهندسی برای MC3303DG4 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the MC3303DG4 when maintaining an existing 14-SOIC quad-amplifier design and preserving the exact ordering code is more important than current product availability. Its four channels, 1 MHz gain-bandwidth product, and single-supply operation make it appropriate for low-frequency industrial, audio, control, and sensor-conditioning circuits. The MC3303DR can be considered when the same electrical device and PCB footprint are needed but tape-and-reel assembly handling is preferred. The MC3403D is a related same-brand option that may fit similar applications, but it should be selected only after direct comparison of common-mode range, output swing, offset voltage, input bias current, noise, slew rate, supply current, and temperature limits. Because the target is obsolete, use the Request a Quote form for remaining stock and confirm long-term availability before committing a new design.

مقایسه با جایگزین‌ها

پارامتر این محصول MC3403D MC3303DR
Brand Texas Instruments Texas Instruments Texas Instruments
Package 14-SOIC 14-SOIC 14-SOIC
Amplifier Count 4 amplifiers 4 amplifiers 4 amplifiers
Product Class Low-power general-purpose operational amplifier General-purpose operational amplifier Low-power general-purpose operational amplifier
Gain-Bandwidth Product 1 MHz 1 MHz 1 MHz
Maximum Supply Rating 30 V 30 V 30 V
Single-Supply Operating Range 3 V to 36 V 3 V to 36 V 3 V to 36 V

تفاوت‌های کلیدی

  • Exact MC3303 family identity (در مقابلMC3403D)
  • Four channels in one 14-pin SOIC package (در مقابلMC3303DR)
  • Documented tube-package configuration (در مقابلMC3303DR)

یادداشت‌های طراحی

Place the supply-bypass capacitor close to pin 11, with a short return path to pin 4. Route each amplifier's inverting-input trace and feedback resistor as a compact loop to minimize parasitic capacitance and susceptibility to injected noise. Because the four channels share supply pins, high-current output stages can couple disturbance into sensitive channels through the power path.

Do not treat the operational amplifier as an unrestricted comparator. When used for thresholding, confirm that both input voltages remain inside the common-mode range and that the output remains in the linear region unless the manufacturer permits the intended configuration. Also avoid leaving unused channels floating; bias each unused amplifier through a stable feedback network.

Check the total rail voltage in split-supply systems and ensure the positive-to-negative rail difference remains within the device limit. Place local decoupling near the package and keep high-current return paths from sharing narrow traces with analog-ground current. The 30 V class rating describes the device family and is not permission to exceed its specified common-mode or output-swing limits.

Choose feedback resistors and source impedances that provide adequate phase margin at the intended closed-loop gain. Very high feedback resistance can increase input-bias-current error, while long input traces can introduce capacitance and oscillation. For low-frequency sensor interfaces, use short guarded traces and consider guarding the non-inverting input when bias-current error is significant.

اطلاعات انطباق

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The MC3303DG4 is identified as ROHS3 compliant. No separate REACH, halogen-free, lead-free, conflict-minerals, or automotive qualification statement was established for this exact ordering code.

تاریخ تأیید داده‌ها: 2026-11-16 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

MC3303DG4 datasheet MC3303DG4 pinout MC3303DG4 datasheet pdf MC3303DG4 equivalent MC3303DG4 replacement MC3303DG4 cross reference MC3303DG4 vs MC3403D MC3303DG4 14-SOIC footprint MC3303DG4 application circuit Texas Instruments MC3303DG4 MC3303DG4 price MC3303DG4 stock

قطعات و اصطلاحات مرتبط

Texas Instruments MC3303DG4 MC3303 MC3303DR MC3403D MC3403 operational amplifier quad operational amplifier general-purpose amplifier low-power amplifier analog signal conditioning gain-bandwidth product 1 MHz single-supply operation split-supply operation input common-mode range output swing feedback network 14-SOIC SOIC package family surface mount industrial control audio preamplification active filter RoHS
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ