MC3303DG4 - Quad 30V 1MHz Op Amp | Texas Instruments
MPN: MC3303DG4 ✗ 停產MC3303DG4 概覽
An operational amplifier is a high-gain, high-impedance differential amplifier used to amplify weak signals, buffer inputs, perform active filtering, compare voltages, or drive analog stages. The MC3303 belongs to the broader operational-amplifier hierarchy, combining four independent amplifiers in one integrated circuit to reduce board area and simplify multi-channel designs. Compared with a discrete single amplifier, the quad device provides matched circuitry within one package and a common supply connection.
The MC3303's headline characteristics are four integrated amplifier channels, a 1 MHz gain-bandwidth product, and a 30 V maximum supply-related operating rating in the ordered configuration. The manufacturer identifies it as a low-power amplifier, making it suitable for general-purpose designs that do not require the bandwidth of a modern high-speed amplifier. Its 14-SOIC package supports conventional surface-mount assembly, while the exposed thermal approach is not required because the package does not use a bottom thermal pad.
The product family is described as a quadruple low-power operational amplifier with performance comparable to the uA741 while adding the ability to operate from a single supply over a 3 V to 36 V range. Split-supply operation is also possible when the total voltage between the supply rails remains acceptable. These characteristics make the amplifier applicable to both legacy 24 V industrial systems and lower-voltage circuitry.
Typical uses include four-channel sensor conditioning, low-frequency active filters, audio preamplification, comparator-style threshold circuits, current-to-voltage conversion, and general instrumentation. One package can provide independent gain stages for multiple sensor channels, provided each amplifier is configured with stable feedback compensation and the supply rails meet the required limits.
Designers should review the complete manufacturer pin description and typical application circuit before assigning PCB tracks. Decoupling capacitors should be placed close to the supply pins, input and feedback components should be kept compact, and unused amplifier channels should be configured according to the recommended stable-input method rather than left floating.
This product record combines device status, package details, lifecycle information, sourcing guidance, compatible-family analysis, and practical PCB considerations into a focused engineering reference for designing around the MC3303DG4.
直接替換替代品,適用於 MC3303DG4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MC3303DG4 (相同外形與佔位) — 差異在於 Amplifier Type, Operating Temperature Range, Package, Product Type, RoHS Status.
MC3303DG4 最大額定值與電氣特性
| Amplifier Count | 4 amplifiers |
| Product Type | Quad general-purpose operational amplifier |
| Gain-Bandwidth Product | 1 MHz |
| Maximum Supply Rating | 30 V |
| Single-Supply Operating Range | 3 V to 36 V |
| Split-Supply Operation | Supported within the applicable total supply-voltage limit |
| Supply Configuration | Single supply or split supply |
| Amplifier Type | General purpose |
| Power Class | Low-power operational amplifier |
| 封裝 | 14-SOIC |
| Package Width | 3.90 mm |
| Package Width in Inches | 0.154 inch |
| Package Length | 3.90 mm |
| 安裝類型 | Surface mount |
| Shipping Package | Tube |
| 生命週期狀態 | Obsolete |
| RoHS 狀態 | ROHS3 compliant |
MC3303DG4 腳位配置
| 腳位 1 | OUTA — Amplifier A output |
| 腳位 2 | -INA — Amplifier A inverting input |
| 腳位 3 | +INA — Amplifier A non-inverting input |
| 腳位 4 | V- — Negative supply connection |
| 腳位 5 | +INB — Amplifier B non-inverting input |
| 腳位 6 | -INB — Amplifier B inverting input |
| 腳位 7 | OUTB — Amplifier B output |
| 腳位 8 | OUTC — Amplifier C output |
| 腳位 9 | -INC — Amplifier C inverting input |
| 腳位 10 | +INC — Amplifier C non-inverting input |
| 腳位 11 | V+ — Positive supply connection |
| 腳位 12 | +IND — Amplifier D non-inverting input |
| 腳位 13 | -IND — Amplifier D inverting input |
| 腳位 14 | OUTD — Amplifier D output |
典型應用
MC3303DG4 適用於 6 應用s: Industrial Sensor Signal Conditioning, Low-Frequency Active Filters, Audio Preamplification, Threshold and Comparator Circuits, Current-to-Voltage Measurement, General Analog Control Interface.
Industrial Sensor Signal Conditioning
The MC3303DG4 fits four-channel industrial sensor conditioning because its four independent amplifiers can amplify or buffer multiple low-level inputs within one 14-SOIC package. The 1 MHz gain-bandwidth product is suitable for low-frequency process signals, while single-supply operation from 3 V to 36 V supports compatibility with legacy 24 V industrial systems. Each channel should use feedback compensation matched to the intended closed-loop gain. Designers must also verify the input common-mode range against the sensor output and ensure the output swing remains inside the amplifier limits. This device is appropriate for maintaining an existing sensor interface, although its obsolete status should be considered before releasing new production hardware.
推薦
Low-Frequency Active Filters
The four amplifiers in the MC3303DG4 can implement independent active-filter stages for audio, measurement, and control systems. A 1 MHz gain-bandwidth product provides useful bandwidth for low-frequency filters, and the device can operate from a single 3 V to 36 V supply or from split rails where permitted. Practical designs should keep the inverting input and feedback components close together to reduce parasitic coupling, and should verify capacitor and resistor tolerances because they directly determine the filter response. Input bias current and output-drive requirements should also be checked against the selected source impedance and following stage.
推薦
Audio Preamplification
The MC3303DG4 is suitable for modest audio preamplification because each channel provides independent gain and the device is described as a low-power quad operational amplifier. Its 1 MHz gain-bandwidth product is appropriate for audio-band applications rather than high-frequency video or RF tasks. In a four-channel mixer, the amplifiers can support microphone, line, or playback paths while sharing one supply package. The design must account for the output swing, input common-mode range, noise contribution of the feedback network, and stability with the source impedance. A bypass capacitor near the supply connection is recommended to keep supply ripple from coupling into the audio channels.
推薦
Threshold and Comparator Circuits
The MC3303DG4 can implement four threshold-detection or comparator-style functions when the input and output remain within the amplifier's specified common-mode and swing limits. The single-supply range of 3 V to 36 V allows the device to operate from compact 3.3 V systems as well as higher-voltage industrial rails. Feedback should be arranged so the output remains in its linear operating region, because the product is an operational amplifier rather than a dedicated comparator with latch or open-drain output. For a robust design, evaluate noise around the threshold, response time with the selected gain, and the behavior of any unused amplifier channels.
推薦
Current-to-Voltage Measurement
The MC3303DG4 can provide transimpedance amplification for low-frequency current measurements when the source resistance and feedback network remain within the amplifier's operating limits. Its four-channel arrangement permits several sensors to share a common package while retaining independent feedback paths. A 1 MHz gain-bandwidth product is generally suitable for bandwidth-conscious measurement circuits, but stability must be evaluated with the actual sensor capacitance and feedback resistance. Input bias current can create offset across high-value feedback resistors, so source impedance and bias-current specifications should be checked before scaling the current range. The obsolete lifecycle status makes this configuration most appropriate for maintaining established instrumentation.
推薦
General Analog Control Interface
The MC3303DG4 is well suited to general analog control tasks because four channels can amplify error signals, buffer sensor outputs, or generate control voltages within one package. Its ability to run from a single supply as low as 3 V supports compatibility with legacy control systems, while its 30 V class device rating covers higher-voltage industrial interfaces. Feedback-network components should be selected for stable closed-loop operation at the intended gain, and the amplifier output must remain inside its rated swing. PCB layout should provide a low-impedance ground return and place supply bypassing near pin 11, with careful attention to analog traces near switching circuitry.
推薦
推薦產品摘要
工程參考資料,適用於 MC3303DG4 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MC3403D | MC3303DR |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 14-SOIC | 14-SOIC | 14-SOIC |
| Amplifier Count | 4 amplifiers | 4 amplifiers | 4 amplifiers |
| Product Class | Low-power general-purpose operational amplifier | General-purpose operational amplifier | Low-power general-purpose operational amplifier |
| Gain-Bandwidth Product | 1 MHz | 1 MHz | 1 MHz |
| Maximum Supply Rating | 30 V | 30 V | 30 V |
| Single-Supply Operating Range | 3 V to 36 V | 3 V to 36 V | 3 V to 36 V |
主要差異化特點
- Exact MC3303 family identity (對比MC3403D)
- Four channels in one 14-pin SOIC package (對比MC3303DR)
- Documented tube-package configuration (對比MC3303DR)
設計說明
Place the supply-bypass capacitor close to pin 11, with a short return path to pin 4. Route each amplifier's inverting-input trace and feedback resistor as a compact loop to minimize parasitic capacitance and susceptibility to injected noise. Because the four channels share supply pins, high-current output stages can couple disturbance into sensitive channels through the power path.
Do not treat the operational amplifier as an unrestricted comparator. When used for thresholding, confirm that both input voltages remain inside the common-mode range and that the output remains in the linear region unless the manufacturer permits the intended configuration. Also avoid leaving unused channels floating; bias each unused amplifier through a stable feedback network.
Check the total rail voltage in split-supply systems and ensure the positive-to-negative rail difference remains within the device limit. Place local decoupling near the package and keep high-current return paths from sharing narrow traces with analog-ground current. The 30 V class rating describes the device family and is not permission to exceed its specified common-mode or output-swing limits.
Choose feedback resistors and source impedances that provide adequate phase margin at the intended closed-loop gain. Very high feedback resistance can increase input-bias-current error, while long input traces can introduce capacitance and oscillation. For low-frequency sensor interfaces, use short guarded traces and consider guarding the non-inverting input when bias-current error is significant.
合規資訊
The MC3303DG4 is identified as ROHS3 compliant. No separate REACH, halogen-free, lead-free, conflict-minerals, or automotive qualification statement was established for this exact ordering code.