اطلاعیه آخرین فرصت خرید: MC9S08QG8MFQE به پایان چرخه عمر نزدیک می‌شود. آخرین تاریخ سفارش: با ما تماس بگیرید. مشاهده قطعات جایگزین موجود →
NXP Semiconductors

MC9S08QG8MFQE - 8-Bit 20MHz 8KB Flash MCU | NXP

MPN: MC9S08QG8MFQE ✗ پایان تولید
2.5 V or 3.3 V Vdss 8-DFN-EP (4 x 4 mm) Package 20 MHz Speed 8 KB (8K x 8) Memory
حداقل سفارش: 1 |

MC9S08QG8MFQE نمای کلی

The NXP Semiconductors MC9S08QG8MFQE is an 8-bit HCS08 S08-core microcontroller operating up to 20 MHz with 8 KB of Flash memory in an 8-DFN exposed-pad package measuring 4 x 4 mm. The device combines a compact footprint with integrated timers, serial I/O, an ADC, keyboard-interrupt capability, and up to 12 general-purpose I/O pins, making it suitable for embedded control, sensing, and low-cost consumer products.

An MCU is a semiconductor device that combines a processor core, memory, and peripherals on one integrated circuit. The S08 core belongs to the HCS08 family of 8-bit microcontrollers, a category intended for compact embedded-control tasks. Unlike a general-purpose personal-computer processor, the MC9S08QG8MFQE is optimized for deterministic control of embedded systems, including analog measurement, timer-based sequencing, serial communication, and direct control of external sensors or actuators.

The principal device characteristics are an 8-bit architecture, a 20 MHz maximum operating frequency, 8 KB of Flash program memory, and operation from 2.5 V or 3.3 V as identified for this device. Its 8-DFN exposed-pad package reduces board area while supporting improved thermal conduction when the exposed pad is connected to the PCB ground plane correctly. NXP identifies the device as RoHS compliant, and the family documentation describes shared timer, serial I/O, ADC, and keyboard-interrupt resources.

The S08 architecture provides a compact instruction set and integrated peripherals intended to reduce the need for discrete support components. Flash memory retains programmed firmware when power is removed, while the MCU's on-chip peripherals can handle common control functions without separate logic. Designers should account for shared peripheral pins when assigning functions, and they should follow the manufacturer's package drawings and pin-description tables for exact land patterns, exposed-pad connections, and recommended decoupling.

Typical applications include low-cost keypad controls, compact industrial sensing modules, temperature or voltage monitoring instruments, motor and actuator controllers, consumer appliances, and compact communications modules. The 20 MHz clock rate provides more timing headroom than slower 8-bit controllers, while 8 KB of Flash accommodates focused firmware rather than resource-heavy graphical or networking applications.

For a new PCB, place the decoupling capacitors and exposed-pad ground connection exactly as specified by the NXP datasheet and reference layout. Because MC9S08QG8MFQE is listed as end of life, production designs should validate supply continuity, firmware compatibility, and any approved migration plan before committing to new volume.

This product page combines lifecycle status, package and memory characteristics, sourcing guidance, drop-in family options, comparison parameters, and practical design considerations. It is intended to help engineers quickly determine whether this legacy S08 controller remains appropriate for an existing design and how to assess a replacement path when supply or product-change considerations become important.

جایگزین‌های drop-in برای MC9S08QG8MFQE — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای MC9S08QG8MFQE (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, RoHS Status, Core, Product Type, Mounting Type.

NXP Semiconductors
Package: 16-pin TSSOP (DTE)
مقایسه با MC9S08QG8MFQE →
NXP Semiconductors
Package: 24-QFN-EP (4x4 mm)
Core: HCS08 (enhanced HC08 with BGND instruction)
Product Type: 8-bit Microcontroller (MCU)
مقایسه با MC9S08QG8MFQE →
NXP Semiconductors
Package: 8-pin DFN-EP (4x4 mm)
RoHS Status: ROHS compliant (per datasheet)
Core: HCS08 (enhanced S08)
مقایسه با MC9S08QG8MFQE →
NXP Semiconductors
Package: 16-pin PDIP (PBE), 7.62 mm row spacing
Core: HCS08 (8-bit)
Mounting Type: Through-Hole
مقایسه با MC9S08QG8MFQE →
NXP Semiconductors
Package: 8-pin SOIC, MS-012AA
RoHS Status: RoHS compliant
Product Type: 8-bit S08 microcontroller
مقایسه با MC9S08QG8MFQE →

MC9S08QG8CFKE

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
NXP Semiconductors
📦 8-DFN-EP (4x4)
8-bit Microcontroller (MCU) · HCS08 (enhanced HC08 with BGND instruction) · 8 KB · 512 B · 20 MHz · 1.8 V to 3.6 V · 24-QFN-EP (4x4 mm)

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MC9S08QG8CFQE

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
NXP Semiconductors
📦 8-DFN-EP (4x4)
HCS08 (enhanced S08) · 8-bit CISC · 20 MHz · 8 KB (8K x 8) · 1.8 V to 3.6 V · Up to 6 · 8-pin DFN-EP (4x4 mm)

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MC9S08QG8CDTE

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
NXP Semiconductors
📦 8-DFN-EP (4x4)
NXP Semiconductors (formerly Freescale) · S08QG (HCS08 low-cost family) · HCS08 (CISC, 8-bit) · 8 KB (8K x 8) · 512 bytes · 20 MHz · 1 MHz to 10 MHz · 1.8 V to 3.6 V

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MC9S08QG8CFBE

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-DFN-EP (4x4)
Flash differs by 0 KB and clock frequency differs by 0 MHz; verify the suffix-specific temperature and shipping format

📋 جایگزین مرجع (خارج از کاتالوگ)

MC9S08QG8CPBE

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
NXP Semiconductors
📦 8-DFN-EP (4x4)
HCS08 (8-bit) · 20 MHz · 8 KB (8K x 8) · 512 B · 1.8 V to 3.6 V · 6 · 10-bit, 12-channel · 2 (TPM1, TPM2)

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MC9S08QG8MFQE حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type 8-bit Microcontroller Unit
Architecture CISC
Processor Core Enhanced HCS08 S08 core
Maximum CPU Frequency 20 MHz
Flash Memory 8 KB (8K x 8)
ولتاژ تغذیه 2.5 V or 3.3 V
بسته‌بندی 8-DFN-EP (4 x 4 mm)
نوع نصب Surface mount
General-Purpose I/O Up to 12 pins
Input-Only Pin 1 pin
Output-Only Pin 1 pin
Integrated Peripherals Timers, serial I/O, ADC, and keyboard interrupts
Memory Technology Flash
Product Family HCS08 Family
وضعیت RoHS Compliant
وضعیت چرخه عمر End of Life
Shipping Format Tray

راهنمای پیکربندی پین MC9S08QG8MFQE 8-dfn-ep (4 x 4 mm)

پیکربندی پین برای MC9S08QG8MFQE (پکیج 8-dfn-ep (4 x 4 mm)). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 8-dfn-ep (4 x 4 mm) برای MC9S08QG8MFQE

داده پین‌آوت تفصیلی موجود نیست برای MC9S08QG8MFQE.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MC9S08QG8MFQE مناسب است برای 6 کاربردs: Compact Industrial Sensor Controller, Temperature and Voltage Monitor, Keypad and User Interface Control, Small Motor and Actuator Control, Battery-Powered Portable Device, Consumer Appliance Controller.

🏭

Compact Industrial Sensor Controller

The MC9S08QG8MFQE fits compact sensor modules that must acquire, filter, and transmit measurements without relying on a high-power processor. Its 20 MHz S08 core provides timing headroom for scheduling ADC conversions and serial transfers, while the integrated ADC reduces the need for a separate analog front end. The 8 KB of Flash can hold focused acquisition, calibration, and communication firmware. In an industrial enclosure, the 4 x 4 mm 8-DFN-EP package helps preserve board area, although designers should maintain separation from high-current switching stages and verify the device's temperature requirements against the enclosure conditions.

🌡️

Temperature and Voltage Monitor

The MC9S08QG8MFQE is suitable for a dedicated environmental or power-monitoring module that periodically samples voltage and temperature-related signals. The on-chip ADC and timer resources support periodic acquisition and threshold checks, while 20 MHz processing speed permits responsive filtering and local status reporting. Its 8 KB Flash capacity is appropriate for compact firmware rather than large data logging. Operation from 2.5 V or 3.3 V also allows integration with low-voltage sensor networks, provided the selected supply level matches the board architecture. Calibrate the analog channel and configure the low-power modes against the manufacturer electrical and application guidance.

🧩

Keypad and User Interface Control

The MC9S08QG8MFQE can manage a keypad, menu keys, status indicators, and other simple user-interface functions in a compact appliance. The keyboard-interrupt capability supports efficient detection of key activity, while timers can handle debouncing, long-press detection, display timing, and periodic background tasks. At 20 MHz, the core has sufficient headroom to combine interface handling with diagnostics or serial reporting. The 8-DFN-EP package reduces PCB footprint in space-constrained handheld products, and the 8 KB Flash limit favors focused control firmware. Validate pin multiplexing and the exact number of usable I/O pins in the NXP pin-description table before assigning the physical keys.

⚙️

Small Motor and Actuator Control

The MC9S08QG8MFQE can serve as the sequencing controller for small motors, solenoids, relays, or other actuators in compact equipment. Its timers support repeatable pulse generation, debounce timing, and protection windows, while the 20 MHz core can coordinate multiple actuator states and monitor feedback inputs. The small 8-DFN-EP footprint is valuable where motor-control electronics share limited board area with communications or sensors. The MCU should not directly drive inductive loads unless the output interface includes suitable drivers, flyback protection, and current limiting. Validate logic levels, timing margins, and thermal performance with the complete actuator circuit rather than relying on the microcontroller ratings alone.

📱

Battery-Powered Portable Device

The MC9S08QG8MFQE can be used in a compact battery-powered accessory that combines sensing, local logic, and serial reporting. The low-cost 8-bit architecture, 8 KB Flash configuration, and small package suit focused embedded products, while the timer and ADC resources support duty-cycled measurements. Selecting the appropriate clock and peripheral operating modes is essential when battery life matters, because active processing and analog peripherals affect total energy use. The 2.5 V or 3.3 V operating options align with many low-voltage portable architectures. Validate regulator start-up behavior, sleep transitions, and wake sources using the NXP data sheet before defining the product's power budget.

🔧

Consumer Appliance Controller

The MC9S08QG8MFQE is appropriate for a compact consumer appliance that needs deterministic state management, button handling, motor sequencing, and limited serial communication. Its integrated timers, ADC, keyboard interrupts, and serial I/O cover many common control functions without requiring separate logic devices. At 20 MHz with 8 KB of Flash, it fits a focused appliance controller rather than a complex connected product. The small 8-DFN-EP package supports high-density assembly, while RoHS compliance supports use in regions where restricted-substance requirements apply. Before production, confirm supply continuity because NXP marks the exact device End of Life and verify any temperature-grade requirements associated with the appliance enclosure.

What is the operating voltage of MC9S08QG8MFQE?
The MC9S08QG8MFQE operates from 2.5 V or 3.3 V. According to the NXP MC9S08QG8 data sheet and the component listing for this exact MPN, it is an 8-bit S08 microcontroller with an enhanced HCS08 core. Design the power rail and signal levels around the selected voltage, and confirm the complete electrical limits and decoupling requirements in the manufacturer data sheet before releasing the PCB.
What is the maximum operating frequency of MC9S08QG8MFQE?
The MC9S08QG8MFQE supports a maximum operating frequency of 20 MHz. The NXP product page describes the device as an S08QG 8-bit MCU using the S08 core, and the manufacturer data sheet identifies the enhanced HCS08 architecture. This clock rate is suitable for responsive embedded-control, timer, ADC, and serial-interface tasks, although final peripheral clocking must be derived from the device configuration and bus settings.
How much Flash memory does MC9S08QG8MFQE contain?
The MC9S08QG8MFQE contains 8 KB of Flash memory, described by the manufacturer data sheet as 8K x 8. According to the NXP documentation, this member of the MC9S08QG8 family is intended for compact embedded applications. The available memory must be allocated among application code, startup code, configuration data, and bootloader content, so firmware size should be checked against the device's memory map.
What package does MC9S08QG8MFQE use?
The MC9S08QG8MFQE uses an 8-DFN exposed-pad package measuring 4 x 4 mm. The NXP product listing identifies the device as 8-DFN-EP, while distributor records identify the package as 8-DFN-EP. Use the manufacturer's package drawing and land-pattern dimensions for PCB design, and connect the exposed pad according to the datasheet's thermal and electrical guidance.
Where can I download the MC9S08QG8MFQE datasheet PDF?
The official MC9S08QG8 data-sheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/MC9S08QG8.pdf. It covers the MC9S08QG8 and MC9S08QG4 devices, including the enhanced HCS08 core, memory organization, package information, peripherals, electrical characteristics, and application guidance. The product-specific order code MC9S08QG8MFQE is covered within this family documentation.
Where can I find the MC9S08QG8MFQE pinout?
The MC9S08QG8MFQE pinout is located in the pin-description and package-drawing sections of the NXP MC9S08QG8 data sheet. The device is an 8-DFN-EP package with an exposed pad, so the pin table must be read together with the exposed-pad connection notes. Use the manufacturer table when assigning every signal and when creating the PCB footprint rather than relying on a generic DFN drawing.
Is MC9S08QG8MFQE in stock, and what is its lead time?
NXP lists MC9S08QG8MFQE as End of Life, so current availability and lead time can vary by lot and remaining inventory. Submit the exact MPN through the Request a Quote form on this page to obtain current supply, lot, and delivery information. Because the product is EOL, engineers should also request lifecycle and approved migration details before starting a new production design.
Where can I buy MC9S08QG8MFQE online?
The MC9S08QG8MFQE can be requested through the Request a Quote form on this page, where the exact suffix, package, quantity, and lifecycle status should be confirmed before an order is placed. NXP identifies the device as End of Life, making traceability, lot consistency, and counterfeit-part avoidance especially important. Request batch, date-code, and inspection information appropriate to the risk level of the application.
What is the price of MC9S08QG8MFQE?
Current pricing for MC9S08QG8MFQE depends on quantity, remaining supply, and lot traceability because the manufacturer lists the product as End of Life. Use the Request a Quote form on this page for a current quote tied to the exact MPN. A unit value appears in the archived listing record, but that historical figure should not be treated as a guaranteed current market quotation.
What is the best drop-in replacement for MC9S08QG8MFQE?
The closest drop-in options are same-family MC9S08QG8 devices that retain the 8-DFN-EP (4 x 4 mm) footprint, 20 MHz architecture, and 8 KB Flash configuration. Candidates include MC9S08QG8CFKE and MC9S08QG8CFQE, subject to verification of temperature grade, shipping format, pin functions, and lifecycle status. A replacement is only drop-in after its complete ordering code and datasheet have been compared.
Can MC9S08QG8CFKE replace MC9S08QG8MFQE?
MC9S08QG8CFKE is a same-family candidate for MC9S08QG8MFQE because both use the MC9S08QG8 architecture and are compared as 8-DFN devices with 20 MHz operation and 8 KB Flash. Before treating it as a drop-in replacement, verify the exposed-pad layout, pin multiplexing, temperature range, and order-code meaning for the suffix. The two parts share the same device family but their suffix-specific procurement conditions can differ.
MC9S08QG8MFQE vs MC9S08QG8CFKE: which is better for an existing design?
MC9S08QG8MFQE is the primary choice when an existing design requires its exact temperature and ordering characteristics. MC9S08QG8CFKE may be preferable when an equivalent 8-DFN, 20 MHz, 8 KB Flash device is needed during supply transition. Both belong to the MC9S08QG8 family, but an existing board should be approved only after comparing package drawings, electrical limits, firmware configuration, and lifecycle documentation.
When should I choose MC9S08QG8MFQE over another S08 controller?
Choose MC9S08QG8MFQE when maintaining an existing 8-DFN-EP design requires the exact device identity, 20 MHz S08 core, 8 KB Flash configuration, and established firmware behavior. A different S08 option is preferable when it offers a verified long-term supply plan without changing the footprint, pin functions, electrical limits, or application code. For new designs, lifecycle continuity deserves as much attention as the initial device specifications.
Is MC9S08QG8MFQE suitable for low-power embedded control?
The MC9S08QG8MFQE can suit compact embedded-control and sensing systems that need an 8-bit architecture, 20 MHz performance, and 8 KB of Flash. Its integrated timers, serial I/O, ADC, and keyboard-interrupt functions can reduce external component count. Actual battery-life performance depends on the selected operating modes, clock configuration, peripheral activity, and firmware duty cycle, which must be evaluated with the manufacturer data sheet.
What are the key specifications of MC9S08QG8MFQE that engineers should know?
The key specifications are an 8-bit enhanced HCS08 S08 core, 20 MHz maximum frequency, 8 KB Flash memory, 2.5 V or 3.3 V operation, and an 8-DFN-EP package measuring 4 x 4 mm. The device also provides timers, serial I/O, an ADC, and keyboard-interrupt capability, with up to 12 general-purpose I/O pins. NXP identifies the exact product as End of Life, making supply planning essential.
What can replace an MC9S08QG8MFQE in a legacy design?
Legacy designs can consider same-family MC9S08QG8 devices with the same 8-DFN-EP footprint, 8 KB Flash, and 20 MHz operating class. MC9S08QG8CFKE, MC9S08QG8CFQE, and MC9S08QG8CDTE are the primary candidates identified for comparison. A valid replacement must also match pin multiplexing, electrical limits, temperature grade, exposed-pad treatment, and firmware assumptions; no cross-brand MCU can be called drop-in without complete schematic and firmware verification.
Is there a direct cross-brand equivalent for MC9S08QG8MFQE?
No verified cross-brand drop-in equivalent is identified for MC9S08QG8MFQE. A different manufacturer's 8-bit or 32-bit microcontroller generally requires schematic, PCB, firmware, and timing changes even when its memory size and package appear similar. The safest replacement path is to evaluate documented same-family NXP options first, then treat any cross-brand migration as a redesign rather than a pin-for-pin substitution.

داده‌های مرجع مهندسی برای MC9S08QG8MFQE — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose MC9S08QG8MFQE when maintaining an existing released PCB requires the exact original order code, 8-DFN-EP footprint, 20 MHz S08 core, and 8 KB Flash configuration. Consider MC9S08QG8CFKE or MC9S08QG8CFQE when a same-family source is needed for supply continuity, but first compare the suffix-specific temperature grade, shipping format, lifecycle state, exposed-pad connection, and pin multiplexing. MC9S08QG8CDTE, MC9S08QG8CFBE, and MC9S08QG8CPBE are additional same-family candidates to investigate when their order-code characteristics satisfy the production requirements. No cross-brand MCU should be described as a drop-in replacement: differing architectures, interrupts, memories, peripherals, and development tools normally require schematic, PCB, and firmware changes. For a new design, evaluate lifecycle continuity alongside nominal performance because this exact device is End of Life.

مقایسه با جایگزین‌ها

پارامتر این محصول MC9S08QG8CFKE MC9S08QG8CFQE MC9S08QG8CDTE MC9S08QG8CFBE MC9S08QG8CPBE
Package 8-DFN-EP (4x4) 8-DFN-EP (4x4) 8-DFN-EP (4x4) 8-DFN-EP (4x4) 8-DFN-EP (4x4) 8-DFN-EP (4x4)
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Architecture 8-bit HCS08 S08 core 8-bit HCS08 S08 core 8-bit HCS08 S08 core 8-bit HCS08 S08 core 8-bit HCS08 S08 core 8-bit HCS08 S08 core
Maximum Frequency 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz
Flash Memory 8 KB 8 KB 8 KB 8 KB 8 KB 8 KB

تفاوت‌های کلیدی

  • Original-order-code identity for maintaining an existing MC9S08QG8 design (در مقابلMC9S08QG8CFKE)
  • Compact 4 x 4 mm package with an exposed thermal pad (در مقابلMC9S08QG8CFQE)
  • Integrated control resources reduce external discrete logic (در مقابلMC9S08QG8CDTE)

یادداشت‌های طراحی

Create the footprint from the NXP package drawing for the 8-DFN-EP 4 x 4 mm device rather than a generic DFN library. Confirm pad dimensions, pitch, pin numbering, and the exposed-pad geometry. Place the exposed pad on a grounded copper plane with short thermal vias where the layout guidance permits, because the pad provides both electrical and thermal connectivity and poor connection can increase junction temperature.

Follow the manufacturer guidance for power-supply sequencing and decoupling capacitors. The MCU supports 2.5 V or 3.3 V operation, so the selected regulator, I/O levels, and pull-up networks must match that rail. Keep the supply loop short and place local high-frequency bypass capacitance close to the supply and ground pins. For battery-powered designs, evaluate sleep-mode current and startup behavior rather than estimating only active-mode consumption.

Do not assume that every MC9S08QG8 order code is an automatic drop-in replacement. Although the listed same-family candidates share the 8-DFN-EP format and nominal 8 KB, 20 MHz configuration, suffix codes can affect temperature grade, packing, qualification, or lifecycle status. Compare the exact pin table, electrical limits, exposed-pad treatment, and approved product-change information before modifying a released design.

اطلاعات انطباق

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

RoHS compliance is identified for the exact MC9S08QG8MFQE. No specific REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is identified for this part.

تاریخ تأیید داده‌ها: 2026-11-20 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

MC9S08QG8MFQE datasheet MC9S08QG8MFQE pinout MC9S08QG8MFQE datasheet pdf MC9S08QG8MFQE equivalent MC9S08QG8MFQE replacement MC9S08QG8MFQE cross reference MC9S08QG8MFQE footprint MC9S08QG8MFQE price MC9S08QG8MFQE stock NXP MC9S08QG8MFQE MC9S08QG8MFQE vs MC9S08QG8CFKE MC9S08QG8 8 DFN microcontroller

قطعات و اصطلاحات مرتبط

NXP Semiconductors MC9S08QG8MFQE MC9S08QG8CFKE MC9S08QG8CFQE MC9S08QG8CDTE MC9S08QG8CFBE MC9S08QG8CPBE MC9S08QG8 HCS08 S08 core 8-bit microcontroller MCU embedded control Flash memory 20 MHz 8 KB Flash 8-DFN-EP DFN package family surface mount exposed pad ADC serial I/O keyboard interrupt timer RoHS
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ