MC9S08QG8MFQE - 8-Bit 20MHz 8KB Flash MCU | NXP
部品番号: MC9S08QG8MFQE ✗ 生産終了MC9S08QG8MFQE 概要
An MCU is a semiconductor device that combines a processor core, memory, and peripherals on one integrated circuit. The S08 core belongs to the HCS08 family of 8-bit microcontrollers, a category intended for compact embedded-control tasks. Unlike a general-purpose personal-computer processor, the MC9S08QG8MFQE is optimized for deterministic control of embedded systems, including analog measurement, timer-based sequencing, serial communication, and direct control of external sensors or actuators.
The principal device characteristics are an 8-bit architecture, a 20 MHz maximum operating frequency, 8 KB of Flash program memory, and operation from 2.5 V or 3.3 V as identified for this device. Its 8-DFN exposed-pad package reduces board area while supporting improved thermal conduction when the exposed pad is connected to the PCB ground plane correctly. NXP identifies the device as RoHS compliant, and the family documentation describes shared timer, serial I/O, ADC, and keyboard-interrupt resources.
The S08 architecture provides a compact instruction set and integrated peripherals intended to reduce the need for discrete support components. Flash memory retains programmed firmware when power is removed, while the MCU's on-chip peripherals can handle common control functions without separate logic. Designers should account for shared peripheral pins when assigning functions, and they should follow the manufacturer's package drawings and pin-description tables for exact land patterns, exposed-pad connections, and recommended decoupling.
Typical applications include low-cost keypad controls, compact industrial sensing modules, temperature or voltage monitoring instruments, motor and actuator controllers, consumer appliances, and compact communications modules. The 20 MHz clock rate provides more timing headroom than slower 8-bit controllers, while 8 KB of Flash accommodates focused firmware rather than resource-heavy graphical or networking applications.
For a new PCB, place the decoupling capacitors and exposed-pad ground connection exactly as specified by the NXP datasheet and reference layout. Because MC9S08QG8MFQE is listed as end of life, production designs should validate supply continuity, firmware compatibility, and any approved migration plan before committing to new volume.
This product page combines lifecycle status, package and memory characteristics, sourcing guidance, drop-in family options, comparison parameters, and practical design considerations. It is intended to help engineers quickly determine whether this legacy S08 controller remains appropriate for an existing design and how to assess a replacement path when supply or product-change considerations become important.
ドロップイン代替品: MC9S08QG8MFQE — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MC9S08QG8MFQE (同一形状・フットプリント) — 相違点: Package, RoHS Status, Core, Product Type, Mounting Type.
MC9S08QG8CFKE
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MC9S08QG8CFQE
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MC9S08QG8CDTE
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MC9S08QG8CFBE
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MC9S08QG8CPBE
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MC9S08QG8MFQE 最大定格&電気的特性
| Product Type | 8-bit Microcontroller Unit |
| Architecture | CISC |
| Processor Core | Enhanced HCS08 S08 core |
| Maximum CPU Frequency | 20 MHz |
| Flash Memory | 8 KB (8K x 8) |
| 電源電圧 | 2.5 V or 3.3 V |
| パッケージ | 8-DFN-EP (4 x 4 mm) |
| 実装タイプ | Surface mount |
| General-Purpose I/O | Up to 12 pins |
| Input-Only Pin | 1 pin |
| Output-Only Pin | 1 pin |
| Integrated Peripherals | Timers, serial I/O, ADC, and keyboard interrupts |
| Memory Technology | Flash |
| Product Family | HCS08 Family |
| RoHS ステータス | Compliant |
| ライフサイクル状態 | End of Life |
| Shipping Format | Tray |
MC9S08QG8MFQE 8-dfn-ep (4 x 4 mm) ピン配置ガイド
MC9S08QG8MFQE (8-dfn-ep (4 x 4 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MC9S08QG8MFQE.
詳細は データシート をご参照ください。
主な用途
MC9S08QG8MFQE の用途: 6 件s: Compact Industrial Sensor Controller, Temperature and Voltage Monitor, Keypad and User Interface Control, Small Motor and Actuator Control, Battery-Powered Portable Device, Consumer Appliance Controller.
Compact Industrial Sensor Controller
The MC9S08QG8MFQE fits compact sensor modules that must acquire, filter, and transmit measurements without relying on a high-power processor. Its 20 MHz S08 core provides timing headroom for scheduling ADC conversions and serial transfers, while the integrated ADC reduces the need for a separate analog front end. The 8 KB of Flash can hold focused acquisition, calibration, and communication firmware. In an industrial enclosure, the 4 x 4 mm 8-DFN-EP package helps preserve board area, although designers should maintain separation from high-current switching stages and verify the device's temperature requirements against the enclosure conditions.
おすすめ
Temperature and Voltage Monitor
The MC9S08QG8MFQE is suitable for a dedicated environmental or power-monitoring module that periodically samples voltage and temperature-related signals. The on-chip ADC and timer resources support periodic acquisition and threshold checks, while 20 MHz processing speed permits responsive filtering and local status reporting. Its 8 KB Flash capacity is appropriate for compact firmware rather than large data logging. Operation from 2.5 V or 3.3 V also allows integration with low-voltage sensor networks, provided the selected supply level matches the board architecture. Calibrate the analog channel and configure the low-power modes against the manufacturer electrical and application guidance.
おすすめ
Keypad and User Interface Control
The MC9S08QG8MFQE can manage a keypad, menu keys, status indicators, and other simple user-interface functions in a compact appliance. The keyboard-interrupt capability supports efficient detection of key activity, while timers can handle debouncing, long-press detection, display timing, and periodic background tasks. At 20 MHz, the core has sufficient headroom to combine interface handling with diagnostics or serial reporting. The 8-DFN-EP package reduces PCB footprint in space-constrained handheld products, and the 8 KB Flash limit favors focused control firmware. Validate pin multiplexing and the exact number of usable I/O pins in the NXP pin-description table before assigning the physical keys.
おすすめ
Small Motor and Actuator Control
The MC9S08QG8MFQE can serve as the sequencing controller for small motors, solenoids, relays, or other actuators in compact equipment. Its timers support repeatable pulse generation, debounce timing, and protection windows, while the 20 MHz core can coordinate multiple actuator states and monitor feedback inputs. The small 8-DFN-EP footprint is valuable where motor-control electronics share limited board area with communications or sensors. The MCU should not directly drive inductive loads unless the output interface includes suitable drivers, flyback protection, and current limiting. Validate logic levels, timing margins, and thermal performance with the complete actuator circuit rather than relying on the microcontroller ratings alone.
おすすめ
Battery-Powered Portable Device
The MC9S08QG8MFQE can be used in a compact battery-powered accessory that combines sensing, local logic, and serial reporting. The low-cost 8-bit architecture, 8 KB Flash configuration, and small package suit focused embedded products, while the timer and ADC resources support duty-cycled measurements. Selecting the appropriate clock and peripheral operating modes is essential when battery life matters, because active processing and analog peripherals affect total energy use. The 2.5 V or 3.3 V operating options align with many low-voltage portable architectures. Validate regulator start-up behavior, sleep transitions, and wake sources using the NXP data sheet before defining the product's power budget.
おすすめ
Consumer Appliance Controller
The MC9S08QG8MFQE is appropriate for a compact consumer appliance that needs deterministic state management, button handling, motor sequencing, and limited serial communication. Its integrated timers, ADC, keyboard interrupts, and serial I/O cover many common control functions without requiring separate logic devices. At 20 MHz with 8 KB of Flash, it fits a focused appliance controller rather than a complex connected product. The small 8-DFN-EP package supports high-density assembly, while RoHS compliance supports use in regions where restricted-substance requirements apply. Before production, confirm supply continuity because NXP marks the exact device End of Life and verify any temperature-grade requirements associated with the appliance enclosure.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC9S08QG8MFQE — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC9S08QG8CFKE | MC9S08QG8CFQE | MC9S08QG8CDTE | MC9S08QG8CFBE | MC9S08QG8CPBE |
|---|---|---|---|---|---|---|
| Package | 8-DFN-EP (4x4) | 8-DFN-EP (4x4) | 8-DFN-EP (4x4) | 8-DFN-EP (4x4) | 8-DFN-EP (4x4) | 8-DFN-EP (4x4) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Architecture | 8-bit HCS08 S08 core | 8-bit HCS08 S08 core | 8-bit HCS08 S08 core | 8-bit HCS08 S08 core | 8-bit HCS08 S08 core | 8-bit HCS08 S08 core |
| Maximum Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Flash Memory | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
主な差別化要因
- Original-order-code identity for maintaining an existing MC9S08QG8 design (vs MC9S08QG8CFKE)
- Compact 4 x 4 mm package with an exposed thermal pad (vs MC9S08QG8CFQE)
- Integrated control resources reduce external discrete logic (vs MC9S08QG8CDTE)
設計ノート
Create the footprint from the NXP package drawing for the 8-DFN-EP 4 x 4 mm device rather than a generic DFN library. Confirm pad dimensions, pitch, pin numbering, and the exposed-pad geometry. Place the exposed pad on a grounded copper plane with short thermal vias where the layout guidance permits, because the pad provides both electrical and thermal connectivity and poor connection can increase junction temperature.
Follow the manufacturer guidance for power-supply sequencing and decoupling capacitors. The MCU supports 2.5 V or 3.3 V operation, so the selected regulator, I/O levels, and pull-up networks must match that rail. Keep the supply loop short and place local high-frequency bypass capacitance close to the supply and ground pins. For battery-powered designs, evaluate sleep-mode current and startup behavior rather than estimating only active-mode consumption.
Do not assume that every MC9S08QG8 order code is an automatic drop-in replacement. Although the listed same-family candidates share the 8-DFN-EP format and nominal 8 KB, 20 MHz configuration, suffix codes can affect temperature grade, packing, qualification, or lifecycle status. Compare the exact pin table, electrical limits, exposed-pad treatment, and approved product-change information before modifying a released design.
コンプライアンス情報
RoHS compliance is identified for the exact MC9S08QG8MFQE. No specific REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is identified for this part.