Microchip Technology

MCP3422A5-E/SN - 18-Bit Dual-Channel Delta-Sigma ADC

MPN: MCP3422A5-E/SN ✓ فعال
2.048 V Vdss 8-pin SOIC Package
حداقل سفارش: 1 |

MCP3422A5-E/SN نمای کلی

The Microchip Technology MCP3422A5-E/SN is an 18-bit, two-channel delta-sigma analog-to-digital converter with differential inputs, a 2.048 V on-board reference, and a 4 sps conversion rate, packaged in an 8-pin SOIC. It operates from a single 2.7 V to 5.5 V supply and communicates through a two-wire I²C-compatible serial interface.

An ADC converts an analog voltage into a digital value for measurement, control, or data logging. The MCP3422 belongs to the delta-sigma ADC class, which uses continuous-time sampling and digital filtering to deliver high resolution and low noise. Within the signal-chain hierarchy, it sits between sensors or front-end circuits and a digital controller, combining an analog measurement function with an I²C interface.

The two differential input channels support measurement of bipolar signals around the selected conversion gain. An on-board precision 2.048 V reference establishes the differential input range of ±2.048 V. Differential operation rejects common-mode voltage, while the 18-bit converter resolution supports high-resolution measurements in sensors, industrial controls, and instrumentation. The A5 variant is identified in product listings as a 4 sps delta-sigma ADC.

The MCP3422 architecture integrates the converter, on-board reference, input channels, and digital control into one compact IC. Conversion data is transferred over the two-wire serial interface, reducing the number of connections required between the analog measurement section and a host controller. Its single-supply operation also simplifies systems that use either 3.3 V or 5 V logic and analog rails. Configuration and measurement sequencing are handled through the device command interface rather than separate programming pins.

Typical uses include bridge or ratiometric sensor measurement, industrial process monitoring, low-frequency instrumentation, portable data acquisition, and embedded control systems with slow-changing analog inputs. The differential inputs are especially useful when the measured quantity appears as a small voltage superimposed on a larger common-mode voltage. The 4 sps conversion rate is appropriate for temperature, pressure, load, and position measurements rather than high-bandwidth waveform acquisition.

Designers should apply input filtering and carefully observe the differential input range, because the 2.048 V reference also determines the usable signal span. Place input and reference components near the device, provide a clean supply connection, and route I²C signals away from sensitive analog inputs. Verify the conversion rate and digital timing against the required control-loop interval before fixing the system sampling schedule.

This page combines manufacturer specifications, package information, pricing availability, selectable drop-in alternatives, and application-focused design guidance. It also provides practical context for choosing the A5 speed grade, planning the analog front end, and evaluating replacement options without changing the 8-pin SOIC footprint.

جایگزین‌های drop-in برای MCP3422A5-E/SN — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای MCP3422A5-E/SN (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Conversion Rate, Operating Temperature Range, Resolution.

Microchip Technology
Conversion Rate: 3.75 samples/s
Operating Temperature Range: -40°C to +125°C
Resolution: Up to 18 bits

MCP3422A2-E/SN

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-pin SOIC
Uses a different conversion-speed grade; 18-bit resolution, 2 differential channels, and the 8-pin SOIC footprint are retained

📋 جایگزین مرجع (خارج از کاتالوگ)

MCP3422A0-E/SN

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-pin SOIC
Uses a faster conversion-speed grade; 18-bit resolution and the 2-channel differential architecture remain unchanged

📋 جایگزین مرجع (خارج از کاتالوگ)

MCP3422A4-E/SN

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Microchip Technology
📦 8-pin SOIC
18 bit · 2 channels · Differential input · Delta-sigma · 3.75 samples/s · 2.048 V · ±2.048 V · 2.7 V to 5.5 V

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MCP3422A6-E/SN

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-pin SOIC
Selects another family conversion-speed grade; the 18-bit resolution and differential 2-channel architecture are unchanged

📋 جایگزین مرجع (خارج از کاتالوگ)

MCP3422-E/SN

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-pin SOIC
Lower-resolution base family grade at 16 bit, about 11% below the target's 18-bit resolution, with the same 2-channel differential architecture

📋 جایگزین مرجع (خارج از کاتالوگ)

MCP3422A5-E/SN حداکثر مقادیر مجاز و مشخصات الکتریکی

Converter Type Delta-sigma ADC
رزولوشن 18 bit
Input Channels 2 channels
Input Architecture Differential inputs
Conversion Rate 4 sps
On-Board Reference Voltage 2.048 V
Differential Input Range +/-2.048 V
Supply Voltage Range 2.7 V to 5.5 V
Supply Type Single supply
Serial Interface Two-wire I2C-compatible interface
محدوده دمای کاری -40 °C to +125 °C
بسته‌بندی 8-pin SOIC
نوع نصب Surface mount
Automotive Classification Automotive

راهنمای پیکربندی پین MCP3422A5-E/SN 8-pin soic

پیکربندی پین برای MCP3422A5-E/SN (پکیج 8-pin soic). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 8-pin soic برای MCP3422A5-E/SN

داده پین‌آوت تفصیلی موجود نیست برای MCP3422A5-E/SN.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MCP3422A5-E/SN مناسب است برای 6 کاربردs: Industrial Pressure and Temperature Monitoring, Load Cell and Bridge Sensor Interface, Battery-Powered Portable Instrumentation, Precision Analog Signal Acquisition, Automotive Sensor Interface, Environmental and IoT Sensor Nodes.

🏭

Industrial Pressure and Temperature Monitoring

The MCP3422A5-E/SN fits industrial pressure, temperature, and process-monitoring systems whose sensor outputs change slowly enough for its 4 sps conversion rate. Two differential channels allow the controller to monitor related variables without adding another ADC package. The 18-bit conversion resolution preserves fine numerical detail, while the on-board 2.048 V reference provides a stable measurement basis over the ±2.048 V differential input range. Place input protection and anti-alias networks ahead of the converter, keep the analog traces short, and decouple the 2.7 V to 5.5 V supply close to the IC. For pressure loops with strict latency requirements, compare the timing of the A5 grade against a faster family option before finalizing the acquisition schedule.

⚡

Load Cell and Bridge Sensor Interface

The MCP3422A5-E/SN is appropriate for load-cell, strain-gauge, and resistive bridge measurements where the useful signal is small and differential. Its two differential input channels provide matched signal paths for bridge excitation and measurement arrangements, while 18-bit resolution improves the numerical granularity of the converted result. The on-board 2.048 V reference can support ratiometric behavior when the bridge excitation is referenced appropriately. Because the device converts at 4 sps, it is best suited to static force readings, slow loading events, and periodic production checks rather than vibration analysis. Use low-noise excitation, shielded analog routing, and differential input filtering to prevent environmental interference from degrading the measurement.

📱

Battery-Powered Portable Instrumentation

The MCP3422A5-E/SN supports portable measurement instruments that need high-resolution readings from low-frequency sensor channels while operating from a 2.7 V to 5.5 V supply. The two-channel differential architecture limits the number of analog packages required in a compact design, and the two-wire serial interface reduces wiring between the measurement front end and an embedded controller. Its 4 sps conversion rate is suitable for periodic readings from gas, environmental, or wearable sensors where energy use is more important than rapid waveform capture. During layout, isolate the I²C bus from analog inputs, provide local supply bypassing, and disable or power-gate unused analog paths when the system supports it for longer battery life.

🖥️

Precision Analog Signal Acquisition

The MCP3422A5-E/SN can be used for slow precision signal acquisition when the application requires 18-bit numerical resolution and differential input measurement rather than wideband sampling. Its two channels allow simultaneous or sequential observation of two related analog quantities, and the 2.048 V on-board reference establishes a convenient input span of ±2.048 V differentially. The 4 sps rate makes the device appropriate for temperature, position, voltage, and environmental monitoring. Engineers should design the front end around the converter's differential range, account for offset and gain calibration, and avoid routing high-energy switching nodes close to the input pins. A digital filter can improve noise performance when the updated result is needed less frequently than the raw conversion cadence.

🚗

Automotive Sensor Interface

The MCP3422A5-E/SN is associated with automotive-class applications and can support slow-changing vehicle sensor measurements when its operating range of -40 °C to +125 °C satisfies the design requirement. Two differential channels are useful for pressure, position, temperature, and other ratiometric or bridge-derived quantities, while 18-bit resolution supports detailed result representation. The 4 sps conversion rate fits periodic vehicle monitoring rather than high-bandwidth safety dynamics. Engineers must still verify qualification, EMC, transient protection, and fault-tolerance requirements for the complete automotive subsystem. Use robust input conditioning and isolation where required, and confirm the appropriate automotive qualification status before production release.

🧩

Environmental and IoT Sensor Nodes

The MCP3422A5-E/SN fits environmental sensor nodes that periodically measure low-frequency inputs such as humidity, ambient temperature, soil potential, or light levels. The two differential channels reduce the need for separate converter packages, while the I²C-compatible interface supports connection to a low-power embedded controller. Its 18-bit result scale and 2.048 V on-board reference provide useful measurement granularity in compact systems. Because the converter operates at 4 sps, average repeated readings when additional noise rejection is needed rather than treating it as a high-speed oscilloscope channel. Keep analog filtering close to the device, provide stable supply bypassing, and use a ground layout that prevents sensor return currents from flowing through the converter's reference and input paths.

خلاصه محصولات پیشنهادی

MCP3422A2-E/SN Same-family lower-speed ADC alternative استفاده‌شده در: Industrial Pressure and Temperature Monitoring, Precision Analog Signal Acquisition, Environmental and IoT Sensor Nodes MCP3422A0-E/SN Same-family faster ADC alternative استفاده‌شده در: Industrial Pressure and Temperature Monitoring, Battery-Powered Portable Instrumentation, Automotive Sensor Interface MCP3422A4-E/SN Microchip Technology استفاده‌شده در: Load Cell and Bridge Sensor Interface, Precision Analog Signal Acquisition MCP3422A6-E/SN Same-family speed-grade alternative استفاده‌شده در: Load Cell and Bridge Sensor Interface, Automotive Sensor Interface MCP3422-E/SN Same-package base-resolution family alternative استفاده‌شده در: Battery-Powered Portable Instrumentation, Environmental and IoT Sensor Nodes
What is the MCP3422A5-E/SN?
The MCP3422A5-E/SN is a Microchip Technology 18-bit, two-channel delta-sigma ADC with differential inputs, a 4 sps conversion rate, and a two-wire I²C-compatible interface. According to the Microchip manufacturer product page, the device includes a precision 2.048 V on-board reference and supports a differential input range of ±2.048 V. It is intended for high-resolution, low-frequency measurement and is packaged in an 8-pin SOIC.
What is the operating voltage of MCP3422A5-E/SN?
The MCP3422A5-E/SN operates from a single 2.7 V to 5.5 V supply. The manufacturer product information identifies the MCP3422 family as a two-channel, 18-bit delta-sigma converter with differential inputs and an on-board 2.048 V reference. This supply range supports both 3.3 V and 5 V systems, although the attached I²C interface voltage and signal levels should be checked against the host controller before implementation.
Where can I download the MCP3422A5-E/SN datasheet PDF?
The official MCP3422A5-E/SN datasheet is available through the Microchip MCP3422 product page, with a direct manufacturer PDF also available from the Microchip document server. The product page identifies the converter as an 18-bit, two-channel delta-sigma ADC with differential inputs and a 2.048 V on-board reference. Use the manufacturer document for the definitive pin description, electrical limits, conversion timing, and recommended application circuit.
Where can I find the MCP3422A5-E/SN pinout?
The MCP3422A5-E/SN pinout is found in the pin-description section and package drawing of the manufacturer MCP3422 datasheet. The device is an 8-pin SOIC, and its pins divide among the two differential analog channels, supply and ground, the 2.048 V reference, and the two-wire serial interface. Use the package drawing rather than relying on a generic SOIC-8 diagram because the MCP3422 pin assignment is specific to this converter.
How many bits and channels does the MCP3422A5-E/SN have?
The MCP3422A5-E/SN provides 18-bit resolution across two analog input channels. Microchip describes the MCP3422 as a low-noise, high-accuracy delta-sigma ADC with differential inputs and up to 18 bits of resolution. The on-board 2.048 V reference enables a ±2.048 V differential input range. Both channels are designed for instrumentation and sensor signals where high numerical resolution and differential measurement are important.
What is the conversion rate of MCP3422A5-E/SN?
The MCP3422A5-E/SN conversion rate is 4 sps, as identified in the Microchip distributor product listing. This rate suits temperature, pressure, load-cell, and other slowly changing sensor measurements rather than high-speed signal acquisition. According to the manufacturer product page, the ADC uses a two-wire I²C-compatible interface, so the host must schedule commands and read converted data at a rate compatible with the device and application timing.
What is the best drop-in replacement for MCP3422A5-E/SN?
The MCP3422A2-E/SN is the closest same-package family alternative identified for the MCP3422A5-E/SN, retaining the 8-pin SOIC format, two differential channels, 18-bit resolution, and 2.048 V reference architecture while using a different conversion-speed grade. Confirm acquisition timing and gain settings in the manufacturer datasheet before substitution. Other family options include MCP3422A0-E/SN, MCP3422A4-E/SN, MCP3422A6-E/SN, and MCP3422-E/SN.
Can MCP3422A2-E/SN replace MCP3422A5-E/SN?
The MCP3422A2-E/SN can serve as a same-footprint family replacement when its lower conversion-speed grade meets the acquisition-time requirement. It retains the MCP3422 family's two-channel differential architecture, 18-bit resolution, 2.048 V reference, and 8-pin SOIC package. The key engineering trade-off is conversion speed rather than package compatibility, so verify the required sample interval, digital filter behavior, and host timing before production use.
MCP3422A5-E/SN vs MCP3422A0-E/SN - which is better for sensor measurement?
Choose the MCP3422A5-E/SN when a 4 sps acquisition rate provides a useful balance between measurement speed and conversion timing. Choose the MCP3422A0-E/SN when its faster family conversion grade is needed for a time-critical sensor signal. Both retain the 18-bit, two-channel differential architecture and 8-pin SOIC package, so the deciding factor is the required sample interval rather than a board-footprint change.
MCP3422A5-E/SN vs MCP3422-E/SN - which is better for precision measurement?
The MCP3422A5-E/SN is the better choice when the design needs the 18-bit resolution associated with the A5 grade and a 4 sps conversion rate. The non-A MCP3422-E/SN has lower stated resolution, making it less attractive for precision measurements where numerical resolution is the priority. Both belong to the same 8-pin SOIC family, but the software configuration and expected conversion performance should be reviewed after any replacement.
When should I choose MCP3422A5-E/SN over a lower-speed MCP3422 alternative?
Choose MCP3422A5-E/SN when the application needs a specific 4 sps conversion interval while retaining 18-bit resolution, two differential channels, and the 2.048 V on-board reference. A lower-speed MCP3422 family option may be appropriate when longer conversion intervals are acceptable. Because both use an 8-pin SOIC footprint, the choice should be based on signal bandwidth, measurement latency, and system timing rather than PCB layout.
Is MCP3422A5-E/SN suitable for industrial sensor measurement?
The MCP3422A5-E/SN is suitable for industrial sensor measurement when the monitored signal changes slowly enough for a 4 sps conversion rate. Its two differential channels, 18-bit resolution, and 2.048 V reference support precision measurements such as temperature, pressure, strain, and process voltages. The operating range of -40 °C to +125 °C also supports harsh environments, subject to the completed system's input protection, isolation, and calibration requirements.
Where to buy MCP3422A5-E/SN online?
The MCP3422A5-E/SN can be requested through the Request a Quote form on this XAIPART product page. The form is the appropriate route for checking exact MPN availability, order quantity, packaging requirements, and current lead time. The target is an 8-pin SOIC version, so confirm that the quotation corresponds to MCP3422A5-E/SN rather than a different package or conversion-speed suffix.
What is the price of MCP3422A5-E/SN?
Current pricing for the MCP3422A5-E/SN should be requested through the Request a Quote form on this page. Submit the exact MPN, required quantity, and preferred delivery conditions so the quote can reflect the correct 8-pin SOIC configuration. Prices can change with availability and order quantity, making a live quote more reliable than a static listing figure for production planning.
What is the lead time and stock status for MCP3422A5-E/SN?
Current stock status and lead time for MCP3422A5-E/SN should be confirmed through the Request a Quote form on this page. Include the required quantity and any scheduled delivery date in the request. The exact MPN must be stated so that the 8-pin SOIC device is distinguished from MCP3422 variants that use different package suffixes or conversion-speed grades.

داده‌های مرجع مهندسی برای MCP3422A5-E/SN — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the MCP3422A5-E/SN for low-frequency precision measurements that need 18-bit resolution, two differential channels, a 2.048 V on-board reference, and a 4 sps conversion interval. It is particularly suitable for industrial sensors, bridge measurements, environmental nodes, and portable instrumentation. Choose MCP3422A0-E/SN or MCP3422A6-E/SN when the application benefits from a 15 sps family conversion grade. Choose MCP3422A2-E/SN for a 3.75 sps option or MCP3422A4-E/SN for 1.25 sps operation, provided the resulting latency is acceptable. Choose the 16-bit MCP3422-E/SN only when reduced numerical resolution is acceptable. All listed alternatives use the same 8-pin SOIC footprint, but software timing, conversion-grade selection, qualification, and calibration requirements still need verification before substitution.

مقایسه با جایگزین‌ها

پارامتر این محصول MCP3422A2-E/SN MCP3422A0-E/SN MCP3422A4-E/SN MCP3422A6-E/SN MCP3422-E/SN
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Resolution 18 bit Up to 18 bit Up to 18 bit Up to 18 bit Up to 18 bit 16 bit
Input Channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels
Conversion Rate 4 sps 3.75 sps 15 sps 1.25 sps 15 sps 3.75 sps
On-Board Reference 2.048 V 2.048 V 2.048 V 2.048 V 2.048 V 2.048 V
Differential Input Range +/-2.048 V +/-2.048 V +/-2.048 V +/-2.048 V +/-2.048 V +/-2.048 V
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V
Serial Interface Two-wire I2C-compatible Two-wire I2C-compatible Two-wire I2C-compatible Two-wire I2C-compatible Two-wire I2C-compatible Two-wire I2C-compatible
Operating Temperature Range -40 °C to +125 °C -40 °C to +125 °C -40 °C to +125 °C -40 °C to +125 °C -40 °C to +125 °C -40 °C to +125 °C

تفاوت‌های کلیدی

  • Balanced resolution and conversion interval (در مقابلMCP3422A4-E/SN)
  • Higher resolution than the base family grade (در مقابلMCP3422-E/SN)
  • More suitable timing for responsive periodic acquisition (در مقابلMCP3422A2-E/SN)
  • Lower conversion demand than the 15 sps A0 grade (در مقابلMCP3422A0-E/SN)

یادداشت‌های طراحی

Route the two differential input pairs as closely matched, parallel traces where practical, and keep them away from switching nodes, relay contacts, and the I²C clock line. Differential symmetry helps preserve common-mode rejection, while short traces reduce susceptibility to capacitive pickup and conversion error. Connect input filtering components directly beside the corresponding ADC pins and maintain a continuous ground return so analog currents do not share a path with the digital interface.

Place the supply bypass capacitor next to the MCP3422A5-E/SN power pin and provide a low-impedance return to the device ground. The converter operates from 2.7 V to 5.5 V, but the selected rail still needs adequate headroom during reference and converter activity. Avoid routing sensor excitation current through the analog ground region, and decouple any upstream regulator near the ADC rather than relying on capacitance located elsewhere on the board.

Do not treat the 4 sps A5 conversion rate as a general-purpose waveform acquisition speed. The device is better suited to temperature, pressure, strain, and other low-frequency measurements where a periodic result is sufficient. Confirm differential input polarity, the ±2.048 V range established by the on-board reference, and the controller's conversion-completion timing. Using the wrong family speed grade can alter the expected sample interval even though the 8-pin SOIC footprint remains the same.

For noisy sensor nodes, average multiple converted results or use the converter's digital filtering options when the application can tolerate additional latency. Add passive input filtering only after checking its effect on settling and conversion timing. Maintain a quiet reference path, avoid sharing high-current returns near the analog pins, and isolate the I²C bus from analog inputs. This is particularly important when the MCP3422A5-E/SN is mounted near a switching supply or display connector.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

A listing describes the MCP3422A5-E/SN as automotive, but no specific AEC-Q100 qualification status or other compliance declaration is stated. Confirm all environmental and material-compliance requirements with the manufacturer before production release.

تاریخ تأیید داده‌ها: 2026-11-15 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

MCP3422A5-E/SN datasheet MCP3422A5-E/SN pinout MCP3422A5 datasheet pdf MCP3422A5-E/SN specifications MCP3422A5-E/SN equivalent MCP3422A5-E/SN replacement MCP3422A5-E/SN cross reference MCP3422A5-E/SN vs MCP3422A0-E/SN MCP3422A5-E/SN footprint MCP3422A5-E/SN price MCP3422A5-E/SN stock Microchip MCP3422A5-E/SN MCP3422 18-bit ADC application MCP3422A5 8-pin SOIC

قطعات و اصطلاحات مرتبط

Microchip Technology MCP3422A5-E/SN MCP3422A2-E/SN MCP3422A0-E/SN MCP3422A4-E/SN MCP3422A6-E/SN MCP3422-E/SN analog-to-digital converter ADC delta-sigma ADC sigma-delta converter semiconductor I2C two-wire serial interface differential input on-board reference 2.048 V reference 18-bit resolution 4 sps conversion rate 8-pin SOIC SOIC family surface mount industrial sensor measurement bridge sensor interface RoHS REACH AEC-Q100
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ