MCP603T-I/ST - 2.8 MHz Low-Power RRI Op Amp | Microchip
MPN: MCP603T-I/ST ✗ پایان تولیدMCP603T-I/ST نمای کلی
An operational amplifier, or op amp, is an active analog component that provides high open-loop gain and is commonly used to amplify, buffer, filter, or compare small voltage signals. The MCP603 belongs to the broader hierarchy of analog integrated circuits, where it sits alongside instrumentation amplifiers, comparators, and other signal-conditioning devices. Its rail-to-rail output capability allows the output voltage to approach the supply rails, which is valuable when the available headroom is limited.
Key operating characteristics include a 2.8 MHz gain-bandwidth product, approximately 230 uA typical operating current, and offset voltage below 2 mV. The low operating current makes the device suitable for battery-powered instrumentation, sensor interfaces, portable measurement equipment, and embedded control systems where continuous amplifier operation can affect the overall power budget. The single-amplifier configuration also simplifies PCB routing when only one signal path requires amplification.
The MCP603 is a general-purpose amplifier rather than a dedicated precision or high-voltage component. It is appropriate for low-to-moderate frequency signal paths where low power, rail-to-rail operation, and a compact TSSOP footprint are more important than very high bandwidth or very low offset. Designers should verify the required input and output signal ranges against the supply voltage, and should account for amplifier stability, output drive, and decoupling when connecting it to external circuits.
Typical applications include battery-powered sensor conditioning, portable instrumentation, industrial monitoring, low-speed control interfaces, and embedded measurement systems. In a practical design, the MCP603 can amplify a sensor output into a higher-level signal, buffer a divider or reference node, or provide an analog gain stage before an ADC. Decoupling capacitors near the supply pins and careful routing of high-impedance input nodes are important because leakage, oscillation, and grounding errors can limit accuracy.
This product page combines the manufacturer device description with distributor identification for the MCP603T-I/ST and practical guidance for selecting and applying the amplifier. The 8-pin TSSOP package is represented by the tssop-8 package diagram, and the product family information can be used to evaluate the MCP603 against other rail-to-rail operational amplifiers.
جایگزینهای drop-in برای MCP603T-I/ST — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای MCP603T-I/ST (همان فرمفاکتور و فوتپرینت) — متفاوت در Amplifier Type, Package, Gain-Bandwidth Product, Maximum Operating Supply Voltage, Quiescent Current.
MCP603T-E/ST
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
MCP603-I/ST
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←MCP603T-I/ST حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | Single operational amplifier |
| Amplifier Type | General-purpose CMOS operational amplifier |
| Number of Circuits | 1 circuit |
| Number of Channels | 1 channel |
| Gain-Bandwidth Product | 2.8 MHz |
| Typical Operating Current | 230 uA |
| Input Offset Voltage | Less than 2 mV |
| نوع خروجی | Rail-to-rail output |
| بستهبندی | 8-pin TSSOP |
| نوع نصب | Surface mount |
پیکربندی پین MCP603T-I/ST
| پین 1 | [DATA_NEEDED: pin 1 name] — Use the MCP603 manufacturer datasheet pin-description table for the exact function. |
| پین 2 | [DATA_NEEDED: pin 2 name] — Use the MCP603 manufacturer datasheet pin-description table for the exact function. |
| پین 3 | [DATA_NEEDED: pin 3 name] — Use the MCP603 manufacturer datasheet pin-description table for the exact function. |
| پین 4 | [DATA_NEEDED: pin 4 name] — Use the MCP603 manufacturer datasheet pin-description table for the exact function. |
| پین 5 | [DATA_NEEDED: pin 5 name] — Use the MCP603 manufacturer datasheet pin-description table for the exact function. |
| پین 6 | [DATA_NEEDED: pin 6 name] — Use the MCP603 manufacturer datasheet pin-description table for the exact function. |
| پین 7 | [DATA_NEEDED: pin 7 name] — Use the MCP603 manufacturer datasheet pin-description table for the exact function. |
| پین 8 | [DATA_NEEDED: pin 8 name] — Use the MCP603 manufacturer datasheet pin-description table for the exact function. |
کاربردهای معمول
MCP603T-I/ST مناسب است برای 6 کاربردs: Battery-Powered Sensor Signal Conditioning, Portable Instrumentation, Industrial Sensor Interfaces, Low-Frequency Active Filtering, Embedded Control Analog Front Ends, Low-Voltage Reference and Divider Buffering.
Battery-Powered Sensor Signal Conditioning
The MCP603T-I/ST fits low-power sensor interfaces because its typical operating current is 230 uA and its 2.8 MHz gain-bandwidth product provides useful bandwidth for conditioning signals from resistive, capacitive, or low-frequency sensors. Place the amplifier between the sensor and an ADC or controller, then set the gain with feedback resistors while observing the supply and common-mode limits. Its single-channel TSSOP package keeps the footprint small, but the input offset voltage below 2 mV should be included in the error budget when sensor accuracy is important.
پیشنهادی
Portable Instrumentation
MCP603T-I/ST is appropriate for portable measurement equipment where every active component contributes to battery consumption. The 230 uA typical operating current helps keep the amplifier's quiescent demand modest, while rail-to-rail output can improve usable signal range in low-voltage systems. It can buffer a transducer, amplify a scaled analog channel, or drive a modest ADC input. Verify the output-current demand and settle-time requirements, since the amplifier is intended for general-purpose, moderate-bandwidth signal paths rather than high-speed instrumentation.
پیشنهادی
Industrial Sensor Interfaces
The MCP603T-I/ST can serve as a general-purpose amplifier or buffer in industrial monitoring circuits, especially when the design operates from a low-voltage rail and prioritizes low power over maximum bandwidth. Its 2.8 MHz gain-bandwidth product supports low-frequency process and condition signals, and its single-channel TSSOP package is convenient for compact analog front ends. The circuit must include suitable input protection, supply bypassing, and grounding; verify operating temperature and input common-mode limits against the exact production requirements before deployment.
پیشنهادی
Low-Frequency Active Filtering
MCP603T-I/ST is useful in low-frequency active-filter stages where a compact, low-power amplifier is preferred. The 2.8 MHz gain-bandwidth product leaves substantially more bandwidth than many low-frequency filter networks require, while the 230 uA typical operating current helps preserve battery life. Choose resistor and capacitor values around the required cutoff and check closed-loop gain, output loading, and noise behavior. Because this is a general-purpose amplifier, verify the datasheet's input bias and common-mode characteristics when the source impedance is high.
پیشنهادی
Embedded Control Analog Front Ends
MCP603T-I/ST can be placed ahead of a microcontroller ADC in embedded control systems that need gain or buffering for a slow analog signal. The single-channel TSSOP package simplifies routing when one sensor channel is sufficient, and the low typical operating current is advantageous in always-on or duty-cycled systems. Use local supply decoupling and keep the feedback network close to the amplifier to minimize noise pickup. The offset voltage below 2 mV and the input bias current should be included in the end-to-end measurement error calculation.
پیشنهادی
Low-Voltage Reference and Divider Buffering
MCP603T-I/ST can buffer a low-voltage reference node or resistor-divider output when the source impedance is too high for a direct ADC connection. Rail-to-rail output helps preserve signal amplitude near the supply rails, while the low 230 uA typical operating current limits the effect of continuous buffering on a portable system. Confirm the exact output swing, load capability, and stability at the selected gain. For precision measurements, assess input offset, bias current, and temperature drift rather than relying only on the 2.8 MHz bandwidth figure.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای MCP603T-I/ST — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | MCP603T-E/ST | MCP603-I/ST |
|---|---|---|---|
| Package | 8-TSSOP | 8-TSSOP | 8-TSSOP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Circuit Count | 1 circuit | 1 circuit | 1 circuit |
| Output Type | Rail-to-rail output | Rail-to-rail output | Rail-to-rail output |
تفاوتهای کلیدی
- Low-power single-channel amplification (در مقابلMCP603T-E/ST)
- Compact single-amplifier footprint (در مقابلMCP603-I/ST)
- Rail-to-rail output for low-voltage signal paths (در مقابلMCP603T-E/ST)
یادداشتهای طراحی
Place the input and output signal paths close to the amplifier and keep the feedback resistors near the TSSOP pins to minimize parasitic capacitance and sensitivity to board noise. If the source impedance is high, use a grounded guard or nearby low-leakage reference node, and route the return path without sharing noisy return-current segments with the signal ground.
Use the manufacturer-recommended supply bypassing arrangement and keep the decoupling capacitor electrically close to the supply and ground pins. Because the MCP603 family is intended for low-power operation, verify the complete circuit's quiescent current and confirm that the output stage remains stable with the selected load, feedback gain, and external capacitance.
Do not assume that rail-to-rail output means rail-to-rail input. Check the MCP603 datasheet for input common-mode range, output swing, supply limits, and the operating temperature grade. Also avoid selecting a replacement solely from the package name: verify pin functions, offset voltage, bandwidth, bias current, and load behavior before approving a substitution.
اطلاعات انطباق
Compliance details were not identified in the supplied product information. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status with the manufacturer or the applicable product documentation.