Microchip Technology

MCP603T-I/ST - 2.8 MHz Low-Power RRI Op Amp | Microchip

MPN: MCP603T-I/ST ✗ סוף ייצור
Less than 2 mV Vdss 230 uA Id 8-pin TSSOP Package
כמות הזמנה מינימלית: 1 |

MCP603T-I/ST סקירה

The Microchip Technology MCP603T-I/ST is a single-circuit, general-purpose CMOS operational amplifier with a 2.8 MHz gain-bandwidth product, typical operating current of 230 uA, and input offset voltage below 2 mV. It is supplied in an 8-pin TSSOP package with rail-to-rail output and is designed for low-voltage, low-power signal-conditioning applications. The MCP603 family uses Microchip's advanced CMOS technology to provide low bias current and low power consumption while maintaining useful bandwidth for portable and embedded systems.

An operational amplifier, or op amp, is an active analog component that provides high open-loop gain and is commonly used to amplify, buffer, filter, or compare small voltage signals. The MCP603 belongs to the broader hierarchy of analog integrated circuits, where it sits alongside instrumentation amplifiers, comparators, and other signal-conditioning devices. Its rail-to-rail output capability allows the output voltage to approach the supply rails, which is valuable when the available headroom is limited.

Key operating characteristics include a 2.8 MHz gain-bandwidth product, approximately 230 uA typical operating current, and offset voltage below 2 mV. The low operating current makes the device suitable for battery-powered instrumentation, sensor interfaces, portable measurement equipment, and embedded control systems where continuous amplifier operation can affect the overall power budget. The single-amplifier configuration also simplifies PCB routing when only one signal path requires amplification.

The MCP603 is a general-purpose amplifier rather than a dedicated precision or high-voltage component. It is appropriate for low-to-moderate frequency signal paths where low power, rail-to-rail operation, and a compact TSSOP footprint are more important than very high bandwidth or very low offset. Designers should verify the required input and output signal ranges against the supply voltage, and should account for amplifier stability, output drive, and decoupling when connecting it to external circuits.

Typical applications include battery-powered sensor conditioning, portable instrumentation, industrial monitoring, low-speed control interfaces, and embedded measurement systems. In a practical design, the MCP603 can amplify a sensor output into a higher-level signal, buffer a divider or reference node, or provide an analog gain stage before an ADC. Decoupling capacitors near the supply pins and careful routing of high-impedance input nodes are important because leakage, oscillation, and grounding errors can limit accuracy.

This product page combines the manufacturer device description with distributor identification for the MCP603T-I/ST and practical guidance for selecting and applying the amplifier. The 8-pin TSSOP package is represented by the tssop-8 package diagram, and the product family information can be used to evaluate the MCP603 against other rail-to-rail operational amplifiers.

חלופות תחליף ישיר עבור MCP603T-I/ST — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם MCP603T-I/ST (אותו גורם צורה וטביעת רגל) — שונים ב Amplifier Type, Package, Gain-Bandwidth Product, Maximum Operating Supply Voltage, Quiescent Current.

Microchip Technology
Amplifier Type: Single general-purpose operational amplifier
Package: 8-pin SOIC
Maximum Operating Supply Voltage: 6.0 V
Microchip Technology
Amplifier Type: General-purpose operational amplifier
Package: 8-TSSOP, 0.173 inch (4.40 mm) width
Gain-Bandwidth Product: 2.8 MHz typical

MCP603T-E/ST

✅ Drop-In
📦 8-TSSOP
Same Microchip single-circuit rail-to-rail 8-TSSOP family; exact temperature-grade and electrical differences are .

📋 חלופה להתייחסות (לא בקטלוג)

MCP603-I/ST

✅ Drop-In
Microchip Technology
📦 8-TSSOP
General-purpose operational amplifier · 1 channel · 2.7 V · 5.5 V · Up to 6.0 V · 2.8 MHz typical · 2.3 V/µs typical · Less than 325 µA typical

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MCP603T-I/ST דירוגים מרביים ומאפיינים חשמליים

Product Type Single operational amplifier
Amplifier Type General-purpose CMOS operational amplifier
Number of Circuits 1 circuit
Number of Channels 1 channel
Gain-Bandwidth Product 2.8 MHz
Typical Operating Current 230 uA
Input Offset Voltage Less than 2 mV
סוג פלט Rail-to-rail output
מארז 8-pin TSSOP
סוג הרכבה Surface mount

תצורת פינים של MCP603T-I/ST

TSSOP-8 Package Pinout Diagram TSSOP-8 8-pin thin shrink small outline, P0.65mm, JEDEC MO-153. 1 8 2 7 3 6 4 5 TSSOP-8
פין 1 [DATA_NEEDED: pin 1 name] — Use the MCP603 manufacturer datasheet pin-description table for the exact function.
פין 2 [DATA_NEEDED: pin 2 name] — Use the MCP603 manufacturer datasheet pin-description table for the exact function.
פין 3 [DATA_NEEDED: pin 3 name] — Use the MCP603 manufacturer datasheet pin-description table for the exact function.
פין 4 [DATA_NEEDED: pin 4 name] — Use the MCP603 manufacturer datasheet pin-description table for the exact function.
פין 5 [DATA_NEEDED: pin 5 name] — Use the MCP603 manufacturer datasheet pin-description table for the exact function.
פין 6 [DATA_NEEDED: pin 6 name] — Use the MCP603 manufacturer datasheet pin-description table for the exact function.
פין 7 [DATA_NEEDED: pin 7 name] — Use the MCP603 manufacturer datasheet pin-description table for the exact function.
פין 8 [DATA_NEEDED: pin 8 name] — Use the MCP603 manufacturer datasheet pin-description table for the exact function.

יישומים טיפוסיים

MCP603T-I/ST מתאים עבור 6 יישוםs: Battery-Powered Sensor Signal Conditioning, Portable Instrumentation, Industrial Sensor Interfaces, Low-Frequency Active Filtering, Embedded Control Analog Front Ends, Low-Voltage Reference and Divider Buffering.

🧩

Battery-Powered Sensor Signal Conditioning

The MCP603T-I/ST fits low-power sensor interfaces because its typical operating current is 230 uA and its 2.8 MHz gain-bandwidth product provides useful bandwidth for conditioning signals from resistive, capacitive, or low-frequency sensors. Place the amplifier between the sensor and an ADC or controller, then set the gain with feedback resistors while observing the supply and common-mode limits. Its single-channel TSSOP package keeps the footprint small, but the input offset voltage below 2 mV should be included in the error budget when sensor accuracy is important.

📱

Portable Instrumentation

MCP603T-I/ST is appropriate for portable measurement equipment where every active component contributes to battery consumption. The 230 uA typical operating current helps keep the amplifier's quiescent demand modest, while rail-to-rail output can improve usable signal range in low-voltage systems. It can buffer a transducer, amplify a scaled analog channel, or drive a modest ADC input. Verify the output-current demand and settle-time requirements, since the amplifier is intended for general-purpose, moderate-bandwidth signal paths rather than high-speed instrumentation.

🏭

Industrial Sensor Interfaces

The MCP603T-I/ST can serve as a general-purpose amplifier or buffer in industrial monitoring circuits, especially when the design operates from a low-voltage rail and prioritizes low power over maximum bandwidth. Its 2.8 MHz gain-bandwidth product supports low-frequency process and condition signals, and its single-channel TSSOP package is convenient for compact analog front ends. The circuit must include suitable input protection, supply bypassing, and grounding; verify operating temperature and input common-mode limits against the exact production requirements before deployment.

🔧

Low-Frequency Active Filtering

MCP603T-I/ST is useful in low-frequency active-filter stages where a compact, low-power amplifier is preferred. The 2.8 MHz gain-bandwidth product leaves substantially more bandwidth than many low-frequency filter networks require, while the 230 uA typical operating current helps preserve battery life. Choose resistor and capacitor values around the required cutoff and check closed-loop gain, output loading, and noise behavior. Because this is a general-purpose amplifier, verify the datasheet's input bias and common-mode characteristics when the source impedance is high.

⚡

Embedded Control Analog Front Ends

MCP603T-I/ST can be placed ahead of a microcontroller ADC in embedded control systems that need gain or buffering for a slow analog signal. The single-channel TSSOP package simplifies routing when one sensor channel is sufficient, and the low typical operating current is advantageous in always-on or duty-cycled systems. Use local supply decoupling and keep the feedback network close to the amplifier to minimize noise pickup. The offset voltage below 2 mV and the input bias current should be included in the end-to-end measurement error calculation.

📡

Low-Voltage Reference and Divider Buffering

MCP603T-I/ST can buffer a low-voltage reference node or resistor-divider output when the source impedance is too high for a direct ADC connection. Rail-to-rail output helps preserve signal amplitude near the supply rails, while the low 230 uA typical operating current limits the effect of continuous buffering on a portable system. Confirm the exact output swing, load capability, and stability at the selected gain. For precision measurements, assess input offset, bias current, and temperature drift rather than relying only on the 2.8 MHz bandwidth figure.

What is the operating voltage of MCP603T-I/ST?
The MCP603T-I/ST is a single-channel CMOS operational amplifier, and its exact supply-voltage limits should be confirmed from the manufacturer datasheet for the MCP603 family. The family is intended for low-voltage, low-power signal conditioning and has a typical operating current of 230 uA. Before connecting the device, verify that the input, output, and supply voltages remain within the specified operating limits and that the output can remain rail-to-rail for the required signal range.
What are the key specifications of MCP603T-I/ST that engineers should know?
The MCP603T-I/ST is a single-circuit general-purpose operational amplifier with a 2.8 MHz gain-bandwidth product, typical operating current of 230 uA, input offset voltage below 2 mV, and rail-to-rail output capability. It is packaged in an 8-pin TSSOP. These figures make it suitable for low-power signal conditioning, buffering, and moderate-bandwidth analog signal paths, subject to the detailed electrical limits in the manufacturer datasheet.
Where to download the MCP603T-I/ST datasheet PDF?
The official MCP603T-I/ST product information is available on the Microchip Technology MCP603 product page, which provides the manufacturer documentation for the MCP603 family. Use that page and its linked datasheet or product documents for the authoritative pin description, supply limits, electrical characteristics, and test conditions. The product page is the preferred starting point because the TSSOP suffix and family-level documentation must be interpreted together.
Where can I find the MCP603T-I/ST pinout?
The MCP603T-I/ST uses an 8-pin TSSOP package, and the pin names and numbering should be taken from the MCP603 manufacturer datasheet. Use the pin-description table when assigning the supply, ground, input, and output nets; do not infer pin functions from a generic TSSOP drawing. The package library key for this product is tssop-8, and the schematic should follow the manufacturer's numbering convention.
Is MCP603T-I/ST suitable for battery-powered sensor interfaces?
Yes, the MCP603T-I/ST is a reasonable choice for battery-powered sensor interfaces when low operating current is important. Its typical operating current of 230 uA helps limit the amplifier's contribution to system power, while the 2.8 MHz gain-bandwidth product supports moderate-frequency conditioning stages. The final suitability depends on the sensor output range, required accuracy, supply voltage, and whether the system needs offset correction or a more precise amplifier.
What is the difference between MCP603T-I/ST and MCP603T-E/ST?
Both MCP603T-I/ST and MCP603T-E/ST are identified as Microchip Technology single-circuit, general-purpose rail-to-rail amplifiers in 8-pin TSSOP packages. The MCP603T-I/ST is the target device, while the MCP603T-E/ST appears as a separate related listing. The available listing information does not state the exact temperature-grade or parameter difference, so confirm the manufacturer ordering information before treating one as a drop-in substitute.
MCP603T-I/ST vs MCP603-I/ST - which is better for a low-power design?
The MCP603T-I/ST and MCP603-I/ST are both listed as Microchip Technology single-circuit rail-to-rail operational amplifiers in 8-pin TSSOP packages, and both are associated with the low-power MCP603 family. The MCP603T-I/ST includes the T designation in the orderable suffix, while MCP603-I/ST is listed separately. Choose based on the exact temperature grade, package marking, qualification requirements, and the electrical limits shown in the manufacturer ordering guide.
When should I choose MCP603T-I/ST over another low-power op amp?
Choose MCP603T-I/ST when you need a single-channel, low-power amplifier with approximately 230 uA typical operating current, a 2.8 MHz gain-bandwidth product, and an 8-pin TSSOP package. It is a practical choice for general-purpose buffering and modest signal amplification. For applications requiring higher precision, greater bandwidth, stronger output drive, rail-to-rail input, or a different package, compare the complete electrical specifications before making the selection.
What can replace MCP603T-I/ST?
MCP603T-E/ST is the clearest related candidate in the available product information because it is also described as a Microchip Technology single-circuit rail-to-rail amplifier in an 8-pin TSSOP package. MCP603-I/ST is another related listing with the same package description. A valid replacement must still be checked for pin compatibility, supply range, temperature grade, offset, bandwidth, and stability; the available information does not establish universal interchangeability.
Is MCP603T-I/ST in stock and what is its lead time?
Current stock and lead time for MCP603T-I/ST should be confirmed through the Request a Quote form on this page, because availability can change by package, quantity, and manufacturing status. The product is listed by multiple distributors as an 8-pin TSSOP device, but a distributor listing alone is not a guaranteed inventory commitment. Submit the required quantity and target procurement date with the quote request to obtain the current commercial answer.
How much does MCP603T-I/ST cost?
The current commercial price for MCP603T-I/ST should be obtained through the Request a Quote form on this page. This product page intentionally does not present a static price figure because pricing and availability can vary with quantity, package, and market conditions. Include the required order quantity and any target delivery date so the quote can reflect the appropriate sourcing conditions.
Can MCP603T-I/ST be used for low-frequency analog filtering?
Yes, MCP603T-I/ST can be used in many low-frequency analog filtering and signal-conditioning circuits. Its 2.8 MHz gain-bandwidth product provides more bandwidth than typical low-frequency filter stages require, while its 230 uA typical operating current supports power-conscious instrumentation. The exact resistor and capacitor values, expected closed-loop gain, output loading, and stability margin should be checked against the manufacturer characteristics.
What is the input offset voltage of MCP603T-I/ST?
The MCP603 family is specified by Microchip Technology with an input offset voltage of less than 2 mV. This is a useful indication of the amplifier's DC input matching performance, but it is not a complete accuracy specification for every system. Input bias current, common-mode range, noise, resistor tolerances, temperature, and output error still influence the final measurement accuracy.
Does MCP603T-I/ST support rail-to-rail operation?
The MCP603T-I/ST is identified by Microchip Technology and distributors as a rail-to-rail output operational amplifier. Rail-to-rail output is useful when the amplifier must swing close to the positive or negative supply rail while processing signals. The exact input common-mode range and output-swing limits should still be checked in the datasheet, since rail-to-rail output does not by itself guarantee rail-to-rail input operation.
What is the best cross-brand equivalent for MCP603T-I/ST?
No cross-brand equivalent can be confirmed from the supplied product information because the available cross-reference results identify search tools and related Microchip listings but do not establish a specific pin-compatible competitor with matching electrical ratings. Use the manufacturer's cross-reference search or request engineering support for a candidate replacement. A valid substitute must use the same 8-pin TSSOP footprint, support the required supply and input ranges, and meet the application's bandwidth, offset, current, and stability requirements.

נתוני עזר הנדסיים עבור MCP603T-I/ST — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose MCP603T-I/ST for a compact, low-power analog front end that needs one general-purpose amplifier, approximately 230 uA typical operating current, a 2.8 MHz gain-bandwidth product, and rail-to-rail output in an 8-pin TSSOP. It is especially suitable for sensor buffering, portable instrumentation, embedded ADC conditioning, and low-frequency active filtering. MCP603T-E/ST and MCP603-I/ST are the most directly related Microchip options identified by the available listings, but their exact suffix, temperature-grade, and parameter differences must be checked before substitution. If the design requires rail-to-rail input, lower offset, lower noise, higher output drive, greater bandwidth, or a different package, select a more specialized amplifier rather than treating package similarity alone as proof of interchangeability.

השוואה עם חלופות

פרמטר מוצר זה MCP603T-E/ST MCP603-I/ST
Package 8-TSSOP 8-TSSOP 8-TSSOP
Brand Microchip Technology Microchip Technology Microchip Technology
Circuit Count 1 circuit 1 circuit 1 circuit
Output Type Rail-to-rail output Rail-to-rail output Rail-to-rail output

מבדילים עיקריים

  • Low-power single-channel amplification (לעומתMCP603T-E/ST)
  • Compact single-amplifier footprint (לעומתMCP603-I/ST)
  • Rail-to-rail output for low-voltage signal paths (לעומתMCP603T-E/ST)

הערות תכנון

Place the input and output signal paths close to the amplifier and keep the feedback resistors near the TSSOP pins to minimize parasitic capacitance and sensitivity to board noise. If the source impedance is high, use a grounded guard or nearby low-leakage reference node, and route the return path without sharing noisy return-current segments with the signal ground.

Use the manufacturer-recommended supply bypassing arrangement and keep the decoupling capacitor electrically close to the supply and ground pins. Because the MCP603 family is intended for low-power operation, verify the complete circuit's quiescent current and confirm that the output stage remains stable with the selected load, feedback gain, and external capacitance.

Do not assume that rail-to-rail output means rail-to-rail input. Check the MCP603 datasheet for input common-mode range, output swing, supply limits, and the operating temperature grade. Also avoid selecting a replacement solely from the package name: verify pin functions, offset voltage, bandwidth, bias current, and load behavior before approving a substitution.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

Compliance details were not identified in the supplied product information. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status with the manufacturer or the applicable product documentation.

הנתונים אומתו בתאריך: 2026-11-15 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

mcp603 rehlko MCP603T-I/ST datasheet MCP603T-I/ST pinout MCP603T-I/ST equivalent MCP603T-I/ST replacement MCP603T-I/ST 8-TSSOP MCP603T-I/ST 2.8 MHz MCP603T-I/ST 230 uA MCP603T-I/ST price MCP603T-I/ST stock MCP603T-I/ST application circuit MCP603T-I/ST vs MCP603T-E/ST

רכיבים ומונחים קשורים

Microchip Technology MCP603T-I/ST MCP603T-E/ST MCP603-I/ST MCP603 Operational amplifier Op amp CMOS Analog integrated circuit Signal-conditioning IC Rail-to-rail output Gain-bandwidth product Input offset voltage Typical operating current 8-pin TSSOP TSSOP-8 Surface mount Low-power design Sensor interface Portable instrumentation Active filter Embedded control Industrial monitoring Microchip cross-reference search
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר