Microchip Technology

MCP6054-E/ST - 4-Channel 1.8V Precision Op Amp | Microchip

MPN: MCP6054-E/ST ✓ فعال
1.8 V Vdss 30 µA Id 14-lead TSSOP, 4.40 mm width Package
حداقل سفارش: 1 |

MCP6054-E/ST نمای کلی

The Microchip Technology MCP6054-E/ST is a four-channel, low-power precision operational amplifier designed for single-supply systems operating from 1.8 V. Each amplifier provides rail-to-rail input and output operation, a typical gain-bandwidth product of 385 kHz, and a maximum input offset voltage of ±150 µV. The device is offered in a 14-lead TSSOP package and is identified as an E-temperature-grade part in the manufacturer product listing.

An operational amplifier, or op amp, is an analog integrated circuit that amplifies the difference between two input voltages. A precision op amp adds low input offset voltage, low input bias current, and stable operation near the supply rails. The MCP6054 belongs to the hierarchy of operational amplifiers, analog amplifiers, analog signal-chain ICs, and semiconductor-based signal-conditioning devices. Its four amplifiers share a common package while providing independent signal-conditioning channels.

The MCP6054 family combines low quiescent current of approximately 30 µA per amplifier with low offset voltage and unity-gain stability. These characteristics make it suitable for portable instrumentation, battery-powered measurement systems, sensor interfaces, and low-voltage signal-processing boards. Rail-to-rail input behavior improves usable input range near the supply limits, while rail-to-rail output capability helps preserve signal swing at low supply voltages.

The 385 kHz typical gain-bandwidth product supports applications requiring modest closed-loop bandwidth, including buffer, amplifier, and general-purpose analog stages. The maximum input offset voltage of ±150 µV is particularly useful when multiple amplifiers operate at similar gain levels and channel-to-channel offset matching affects measurement accuracy. Unity-gain stability also allows the same device to be used directly as a voltage follower without compensation external networks.

Typical uses include portable sensor interfaces, low-power data-acquisition front ends, battery-operated monitoring equipment, analog signal conditioning, and precision current or voltage measurements. In these systems, the low operating voltage and low quiescent current help control power consumption, while the low offset specification supports accurate amplification of small signals. Designers should still account for input common-mode limits, output swing, noise, stability, and the bandwidth required by the intended feedback network.

For PCB implementation, use the manufacturer's pinout and land pattern for the 14-lead TSSOP, place input and output components close to their associated pins, and provide an adequate bypass connection from the supply pins to ground. Decoupling capacitors should be selected according to the manufacturer application guidance, while the feedback network must preserve the gain-bandwidth and stability limits of the selected amplifier configuration.

This product page combines manufacturer specifications, a complete application-oriented engineering overview, same-footprint alternatives, and practical PCB guidance. It is designed to help engineers determine whether the MCP6054-E/ST provides the required precision, voltage range, power consumption, and package fit before committing the part to a new analog design.

جایگزین‌های drop-in برای MCP6054-E/ST — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

MCP6054T-E/ST

✅ جایگزین مستقیم
📦 14-TSSOP
Same 385 kHz typical gain-bandwidth product and 14-TSSOP footprint; T grade extends operating-temperature coverage relative to the E grade.

📋 جایگزین مرجع (خارج از کاتالوگ)

MCP6034-E/ST

✅ جایگزین مستقیم
Microchip Technology
📦 14-TSSOP
4 circuits · General-purpose operational amplifier · 1.8 V · 900 nA · 10 kHz · Less than 150 uV · Rail-to-rail input · Rail-to-rail output

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MCP604T-I/ST

✅ جایگزین مستقیم
📦 14-TSSOP
Same quad 14-TSSOP footprint; I grade changes the temperature class, while offset and bandwidth differ from the MCP6054-E/ST.

📋 جایگزین مرجع (خارج از کاتالوگ)

MCP6004T-E/ST

✅ جایگزین مستقیم
📦 14-TSSOP
Same quad 14-TSSOP footprint and E-grade suffix; offset, bandwidth, noise, and quiescent-current differences make it a functional rather than identical replacement.

📋 جایگزین مرجع (خارج از کاتالوگ)

MCP6054-E/SL

✅ جایگزین مستقیم
Microchip Technology
📦 14-TSSOP
Quad precision operational amplifier · 4 channels · 1.8 V · 300 kHz · ±150 µV maximum · Approximately 30 µA per amplifier · Rail-to-rail input · Rail-to-rail output

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MCP6054-E/ST حداکثر مقادیر مجاز و مشخصات الکتریکی

Number of Channels 4 channels
Amplifier Type Precision operational amplifier
Minimum Single Supply Voltage 1.8 V
Typical Gain-Bandwidth Product 385 kHz
Maximum Input Offset Voltage ±150 µV
Quiescent Current per Amplifier 30 µA
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Gain Stability Unity-gain stable
Technology CMOS
Temperature Grade E temperature grade
بسته‌بندی 14-lead TSSOP, 4.40 mm width
نوع نصب Surface mount

راهنمای پیکربندی پین MCP6054-E/ST 14-lead tssop, 4.40 mm width

پیکربندی پین برای MCP6054-E/ST (پکیج 14-lead tssop, 4.40 mm width). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 14-lead tssop, 4.40 mm width برای MCP6054-E/ST

داده پین‌آوت تفصیلی موجود نیست برای MCP6054-E/ST.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MCP6054-E/ST مناسب است برای 6 کاربردs: Portable Sensor Signal Conditioning, Battery-Powered Data Acquisition, Precision Voltage Buffering, Low-Voltage Instrumentation, Low-Noise Analog Signal Conditioning, Power and Control Monitoring.

🧩

Portable Sensor Signal Conditioning

The MCP6054-E/ST suits portable sensor front ends because it operates from a single supply as low as 1.8 V while drawing approximately 30 µA per amplifier. Rail-to-rail input operation helps accept sensor signals near the supply limits, and the ±150 µV maximum input offset supports accurate measurement of small analog signals. Four independent channels can condition outputs from separate sensors or monitor several points in a compact instrument. The amplifier is unity-gain stable for direct voltage-following, while its 385 kHz typical gain-bandwidth product handles sensor signals within a modest bandwidth range. Confirm the sensor output range, common-mode limits, and required closed-loop gain before finalizing the interface.

🔋

Battery-Powered Data Acquisition

The MCP6054-E/ST is appropriate for battery-powered data-acquisition systems that need several low-power analog channels. Its 1.8 V minimum supply operation supports compact energy-harvesting and portable-instrument architectures, while the roughly 30 µA per-amplifier quiescent current reduces the standing load on the battery. The maximum input offset voltage of ±150 µV helps preserve measurement integrity for slowly varying or low-amplitude sensor signals. Four channels can process multiple inputs without requiring four separate packages, reducing board area. The engineer should verify output settling time, noise, load drive, and the bandwidth required by the acquisition rate; unity-gain stability is useful for direct sensor buffering.

⚡

Precision Voltage Buffering

The MCP6054-E/ST can serve as a precision unity-gain buffer when a high-impedance source cannot directly drive the next circuit stage. Its unity-gain stability removes the need for an external compensation network, and the specified maximum input offset voltage of ±150 µV limits the DC error introduced into the buffered signal. Rail-to-rail output operation provides useful signal swing at a 1.8 V supply, although the final load and output-current requirements must be checked. Four channels allow several reference or sensor nodes to be buffered independently. Use short feedback traces, maintain the required input and output impedance, and confirm capacitive-load stability at the operating frequency.

🏭

Low-Voltage Instrumentation

The MCP6054-E/ST fits low-voltage instrumentation requiring compact signal amplification and accurate DC behavior. A typical gain-bandwidth product of 385 kHz supports general-purpose closed-loop gains for slow industrial, laboratory, or diagnostic signals, while the low offset specification benefits measurements where several channels compare small voltages. The four-channel TSSOP package simplifies routing and reduces component count compared with separate single amplifiers. At the system level, the 1.8 V operating capability allows the analog front end to operate near the voltage used by low-power sensors. Confirm noise density, input bias current, common-mode range, and output drive against the source and measurement bandwidth before selecting the final gain network.

📡

Low-Noise Analog Signal Conditioning

The MCP6054-E/ST can condition low-level analog signals where input offset and rail-to-rail behavior are important. Its maximum input offset voltage of ±150 µV establishes the guaranteed DC offset limit, while rail-to-rail inputs help maximize signal utilization at low supply voltage. The 385 kHz typical gain-bandwidth product is appropriate for slow control, monitoring, and general analog-conditioning paths rather than high-speed waveform capture. Four channels can implement matched gain stages for bridge, current, or voltage measurements. The actual noise performance depends on the complete circuit, so evaluate the source impedance, resistor values, bandwidth, and required signal-to-noise ratio. Keep feedback loops compact and decouple the supply close to the device.

📊

Power and Control Monitoring

The MCP6054-E/ST is suitable for multi-channel monitoring of power-system or process-control signals when the system operates from low supply voltages. Its four channels can monitor several scaled voltages or current-sense outputs, and rail-to-rail input and output behavior provides useful range near the 1.8 V minimum supply. The low quiescent current of approximately 30 µA per amplifier limits overhead in distributed monitoring electronics, while the ±150 µV maximum offset supports precision comparison of small signals. Choose resistor ratios that keep inputs inside the common-mode range and preserve output headroom. Confirm the required response time, noise performance, and temperature exposure for the monitored operating environment.

خلاصه محصولات پیشنهادی

MCP6054T-E/ST Same-family quad precision amplifier with wider temperature coverage استفاده‌شده در: Portable Sensor Signal Conditioning, Battery-Powered Data Acquisition, Power and Control Monitoring MCP6034-E/ST Microchip Technology استفاده‌شده در: Portable Sensor Signal Conditioning, Precision Voltage Buffering, Low-Noise Analog Signal Conditioning MCP6004T-E/ST Low-voltage quad op amp comparison candidate استفاده‌شده در: Battery-Powered Data Acquisition, Low-Noise Analog Signal Conditioning MCP604T-I/ST Same-package precision amplifier comparison استفاده‌شده در: Precision Voltage Buffering, Low-Voltage Instrumentation, Power and Control Monitoring MCP6054-E/SL Microchip Technology استفاده‌شده در: Low-Voltage Instrumentation
What is the MCP6054-E/ST?
The MCP6054-E/ST is a four-channel CMOS precision operational amplifier with rail-to-rail input and output operation, unity-gain stability, a typical 385 kHz gain-bandwidth product, and operation from a single supply as low as 1.8 V. According to the Microchip MCP6054 product page, it is designed for low-voltage, low-power precision signal-conditioning applications using a 14-lead TSSOP package.
What are the key specifications of MCP6054-E/ST that engineers should know?
The MCP6054-E/ST combines four precision amplifiers, a 1.8 V minimum single supply, 385 kHz typical gain-bandwidth product, ±150 µV maximum input offset voltage, and approximately 30 µA quiescent current per amplifier. The Microchip product page also identifies rail-to-rail input and output operation and unity-gain stability. These characteristics position the device for low-voltage sensor interfaces, buffers, and general-purpose analog signal conditioning.
What is the input offset voltage of MCP6054-E/ST?
The MCP6054-E/ST has a maximum input offset voltage of ±150 µV. According to the Microchip MCP6054 family description, this precision limit supports accurate amplification of small signals and helps maintain consistency among the four amplifier channels. Offset error becomes particularly important at higher closed-loop gains, where the input-referred offset contribution can dominate the useful output signal.
Can MCP6054-E/ST operate from a 1.8 V supply?
Yes. The MCP6054-E/ST operates from a single supply as low as 1.8 V. The Microchip manufacturer page states that the family combines low-voltage operation with rail-to-rail inputs and outputs, allowing the amplifier to process signals near the supply rails. Decoupling, output-swing limits, and the voltage range of connected sensors should still be checked during design.
Is MCP6054-E/ST unity-gain stable?
The MCP6054-E/ST is unity-gain stable, so it can operate as a voltage follower without an external compensation network. Microchip identifies this characteristic as part of the MCP6051, MCP6052, and MCP6054 family specification. This makes the device suitable for buffering sensor outputs, isolating high-impedance sources, and implementing feedback stages where a closed-loop gain near one is required.
What is the gain-bandwidth product of MCP6054-E/ST?
The MCP6054-E/ST has a typical gain-bandwidth product of 385 kHz. According to the Microchip manufacturer page, this value describes the typical bandwidth available when operating with unity feedback gain. Practical closed-loop bandwidth also depends on the selected gain, feedback resistors, load capacitance, and the op amp's gain-bandwidth behavior.
Where to download the MCP6054-E/ST datasheet PDF?
The official MCP6054 manufacturer page is the preferred starting point for the MCP6054-E/ST datasheet and family documentation. It identifies the device as a 30 µA, high-precision operational-amplifier family and links to technical resources. Use the manufacturer's PDF and pin-description table when assigning PCB tracks, selecting bypass capacitors, and confirming the complete 14-lead TSSOP connection.
Where can I find the MCP6054-E/ST pinout?
Use the pin-description table in the official Microchip MCP6054 documentation to verify the complete 14-lead TSSOP pinout. The manufacturer product page and its linked technical documentation are the authoritative references for signal, supply, and no-connect assignments. Do not infer an amplifier's pin functions solely from another quad op amp because package variants can use different arrangements.
MCP6054-E/ST vs MCP6054T-E/ST: which one is better?
Choose MCP6054-E/ST for the E-temperature application, and evaluate MCP6054T-E/ST when the wider temperature range is required. Both are Microchip four-channel precision amplifiers in 14-lead TSSOP packages with the same stated 385 kHz typical gain-bandwidth product. The meaningful selection criterion is operating-temperature coverage rather than electrical precision.
When should I choose MCP6054-E/ST over MCP6034-E/ST?
Choose MCP6054-E/ST when low offset voltage is the priority because the manufacturer specifies a maximum input offset voltage of ±150 µV. MCP6034-E/ST may be considered when its individual offset, bandwidth, quiescent-current, and noise ratings satisfy the design. Both use a 14-lead TSSOP format, so package compatibility should be checked against the official pin tables before substitution.
When should I choose MCP6054-E/ST over MCP6004T-E/ST?
Choose MCP6054-E/ST when the design benefits from the specified maximum input offset voltage of ±150 µV and the family's 385 kHz typical gain-bandwidth product. MCP6004T-E/ST is a general-purpose quad alternative in the same TSSOP format, but it may differ in offset, bandwidth, noise, and quiescent current. Confirm those ratings and the pin assignments before replacing the MCP6054-E/ST.
What can replace MCP6054-E/ST?
The closest documented same-footprint candidates are MCP6054T-E/ST, MCP6034-E/ST, MCP604T-I/ST, and MCP6004T-E/ST, each offered in a 14-lead TSSOP configuration. A drop-in decision must confirm identical pin functions and acceptable temperature grade, offset voltage, bandwidth, noise, quiescent current, and supply range. This page treats them as engineering alternatives rather than unconditional substitutions.
Is MCP6054-E/ST suitable for sensor signal conditioning?
Yes. The MCP6054-E/ST fits low-voltage sensor signal conditioning because it combines rail-to-rail input and output operation, unity-gain stability, low offset voltage, and low quiescent current. The Microchip family specifications support operation from 1.8 V, which is useful in portable measurement systems. Confirm the sensor output range and the amplifier's input and output limits for the actual application.
Where to buy MCP6054-E/ST online?
Use the Request a Quote form on this page to inquire about MCP6054-E/ST availability, minimum order quantity, and current lead time. The form is the appropriate route for a binding quotation and supply confirmation. The manufacturer part number to quote is MCP6054-E/ST, including the E temperature suffix and the /ST 14-lead TSSOP package designation.
What is the lead time for MCP6054-E/ST?
Current lead time for MCP6054-E/ST should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, production schedule, and package allocation, so a fixed delivery interval should not be assumed. Quote the exact MPN MCP6054-E/ST and identify the required shipment quantity when requesting supply confirmation.

داده‌های مرجع مهندسی برای MCP6054-E/ST — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose MCP6054-E/ST when a four-channel, low-voltage precision amplifier is needed with operation from 1.8 V, rail-to-rail input and output behavior, a maximum input offset voltage of ±150 µV, and approximately 30 µA quiescent current per amplifier. Choose MCP6054T-E/ST when the electrical function is unchanged but wider operating-temperature coverage is required. Consider MCP6034-E/ST when its offset, noise, bandwidth, and power ratings better match a specific design; its 14-TSSOP format makes PCB reuse possible. MCP604T-I/ST is relevant when the I temperature class is appropriate, but its precision characteristics must be compared. MCP6004T-E/ST is a general-purpose alternative with the same footprint, though it may not provide the MCP6054 family's offset performance. Before selecting any alternative, verify the official pin assignments, supply range, common-mode range, output swing, load behavior, noise, and stability in the intended circuit.

مقایسه با جایگزین‌ها

پارامتر این محصول MCP6054T-E/ST MCP6034-E/ST MCP604T-I/ST MCP6004T-E/ST
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP
Number of Amplifiers 4 4 4 4 4
Temperature Grade E grade T grade E grade I grade T grade

تفاوت‌های کلیدی

  • Precision offset specification (در مقابلMCP6004T-E/ST)
  • Direct same-family temperature-range option (در مقابلMCP6054T-E/ST)
  • Four precision channels in one compact package (در مقابلMCP6034-E/ST)
  • Low-voltage operation with rail-to-rail behavior (در مقابلMCP604T-I/ST)

یادداشت‌های طراحی

Place the supply bypass capacitor close to the amplifier supply and ground pins, with a short and low-inductance return path. For a four-channel device, each channel's feedback resistors should connect directly to the associated input and output pins, and unused amplifier inputs should be tied to a defined potential rather than left floating. Maintain the package land pattern and copper clearance specified by the manufacturer.

Keep the feedback loop physically small because parasitic resistance and capacitance can alter effective gain and stability. Avoid long traces around high-impedance inputs, where leakage and coupling can exceed the benefit of the ±150 µV offset specification. At low frequencies, add filtering close to the source; at higher frequencies, verify the closed-loop bandwidth against the 385 kHz typical gain-bandwidth product and the selected noise-gain configuration.

Do not treat rail-to-rail input or output as an unlimited range. The usable input range, output swing, and output-current capability remain limited by supply voltage and load. Verify the sensor output, common-mode range, output headroom, load capacitance, and temperature conditions. For a replacement, confirm that every 14-TSSOP pin has the same function and that the alternative's offset, bandwidth, noise, and quiescent-current limits satisfy the circuit requirements.

Estimated: four amplifiers operating at 30 µA each draw approximately 120 µA from the supply, excluding load current, bias-network current, and regulator overhead. This estimate uses the manufacturer's 30 µA per-amplifier figure and four channels. Actual supply demand can be higher during operation, so size the bypass network and power budget using the complete schematic and required transient performance.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The manufacturer family information identifies a low-power CMOS precision op amp, but no specific compliance declarations for the MCP6054-E/ST ordering code were confirmed. Compliance status must be checked against the current manufacturer product documentation before procurement.

تاریخ تأیید داده‌ها: 2026-11-15 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

MCP6054-E/ST MCP6054-E/ST datasheet MCP6054-E/ST datasheet pdf MCP6054-E/ST pinout MCP6054-E/ST equivalent MCP6054-E/ST replacement MCP6054-E/ST cross reference MCP6054-E/ST price MCP6054-E/ST stock Microchip MCP6054-E/ST MCP6054 14-TSSOP pinout MCP6054-E/ST sensor interface MCP6054-E/ST vs MCP6054T-E/ST MCP6054-E/ST vs MCP6034-E/ST

قطعات و اصطلاحات مرتبط

Microchip Technology MCP6054-E/ST MCP6054 MCP6054T-E/ST MCP6034-E/ST MCP604T-I/ST MCP6004T-E/ST MCP6054-E/SL Operational amplifier Precision amplifier Analog amplifier Signal-conditioning IC CMOS Rail-to-rail input Rail-to-rail output Unity-gain stable Gain-bandwidth product Input offset voltage Quiescent current 14-lead TSSOP TSSOP family Surface-mount package Low-voltage instrumentation Portable sensor interface Battery-powered data acquisition
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ