MKL16Z64VFM4 - 48MHz Cortex-M0+ 64KB MCU | NXP
MPN: MKL16Z64VFM4 ✓ فعالMKL16Z64VFM4 نمای کلی
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface logic on one device. The Cortex-M0+ core belongs to the ARM microcontroller product hierarchy, where its compact instruction set and deterministic operation support cost-sensitive embedded control. Within NXP's product portfolio, the Kinetis KL1 family combines this efficient core with low-power design options and USB connectivity for connected peripherals, industrial controls, and compact consumer equipment.
The MKL16Z64VFM4 provides 64 KB of flash, a 48 MHz maximum operating frequency, and a 32-bit architecture. Its integrated USB capability allows a design to communicate with a host without adding a separate USB interface controller. Analog peripherals support applications that must measure or control real-world signals, while the 5 mm by 5 mm HVQFN package reduces board area compared with larger leaded microcontrollers. Supported operating-voltage options listed for the device include 1.8 V, 2.5 V, and 3.3 V.
The Kinetis architecture is suited to low-power embedded designs because the processor and peripherals are optimized for efficient control workloads. Flash memory retains programmed firmware when power is removed, and the Cortex-M0+ platform provides a familiar instruction set and development ecosystem. Because the MKL16Z64VFM4 has limited 64 KB flash capacity, firmware planning should account for code size, boot code, application logic, and configuration data before finalizing the product's feature set.
Typical uses include USB-connected data loggers, compact industrial sensing modules, motor and valve controllers, access-control peripherals, and low-power instrumentation. A USB data logger can use the integrated interface for enumeration and data transfer, while an industrial controller can apply analog peripherals to sensor acquisition and digital outputs to actuators. The small package is especially useful when the PCB area is constrained but full-size leaded packages are undesirable.
When laying out the PCB, place input, output, and decoupling capacitors close to their associated power pins, and route the exposed pad to the thermal and ground structure required by the manufacturer package drawing. Preserve USB-signal routing geometry and provide a clean, continuous ground path beneath the interface. Firmware and peripheral assignments should be checked against the manufacturer's reference manual and device configuration guidance before production.
This product record combines the exact device identity, core, memory, frequency, package, connectivity, and sourcing information with same-family alternatives and practical integration guidance. It helps engineers assess whether the 32-pin Kinetis KL1 MCU matches a board footprint, power architecture, USB requirement, and embedded firmware budget before committing to a design.
جایگزینهای drop-in برای MKL16Z64VFM4 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای MKL16Z64VFM4 (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Flash Memory, Product Family.
MKL16Z64VFT4R
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←MKL16Z128VFT4
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
MKL16Z128VFM4
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
MKL17Z64VFM4
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←MKL17Z128VFM4
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
MKL16Z64VFM4 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Product Family | NXP Kinetis KL1 sub-family |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| CPU Architecture | ARM Cortex-M0+ |
| Word Size | 32 bits |
| Operating Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| USB Interface | Integrated USB |
| Analog Peripherals | Integrated analog peripherals |
| Package Type | 32-pin HVQFN |
| Package Dimensions | 5 mm x 5 mm |
| تعداد پایه | 32 pins |
| نوع نصب | Surface mount |
| وضعیت چرخه عمر | Active |
| Manufacturer | NXP Semiconductors |
راهنمای پیکربندی پین MKL16Z64VFM4 5 mm x 5 mm
پیکربندی پین برای MKL16Z64VFM4 (پکیج 5 mm x 5 mm). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای MKL16Z64VFM4.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
MKL16Z64VFM4 مناسب است برای 6 کاربردs: USB Data Logger, Industrial Sensor Node, Compact Motor Controller, Access-Control Peripheral, Low-Power Instrumentation, Portable Connected Device.
USB Data Logger
The MKL16Z64VFM4 fits a compact USB data logger because its 48 MHz ARM Cortex-M0+ core can service USB traffic while processing sensor data, and its integrated USB peripheral removes the need for a separate host controller. The 64 KB flash capacity is appropriate for firmware, configuration records, and a rolling data buffer, although it may require a serial memory device for long-term storage. Its 32-pin 5 mm by 5 mm HVQFN package also preserves PCB space in portable logging equipment. Design the USB D+ and D- route as a controlled impedance pair, provide the required series termination, and keep switching or sensor circuitry away from the USB interface.
پیشنهادی
Industrial Sensor Node
The MKL16Z64VFM4 is suitable for a compact industrial sensor node that must acquire analog measurements and report status over USB. Its integrated analog peripherals reduce the need for separate measurement circuitry, while the 48 MHz Cortex-M0+ core provides sufficient control performance for filtering, calibration, and communication tasks. The 64 KB flash budget suits a focused firmware image rather than a large local data repository. Use the 1.8 V, 2.5 V, or 3.3 V option that matches the sensor and interface requirements, and isolate analog and digital return paths appropriately. Firmware should include sensor-specific calibration, diagnostics, and watchdog recovery rather than assuming that an MCU alone satisfies functional safety requirements.
پیشنهادی
Compact Motor Controller
The MKL16Z64VFM4 can serve as the logic controller in a compact motor-control system where board area is limited and deterministic embedded processing is required. The 48 MHz Cortex-M0+ core can execute control loops, manage input capture, and supervise external power stages, while the integrated analog peripherals support current or position sensing. The 5 mm by 5 mm HVQFN package leaves more board area for the driver and power components than a larger leaded MCU. Keep switching-node currents away from sensitive analog traces, place decoupling capacitors directly at the supply pins, and verify thermal performance at the maximum motor-drive duty cycle. A suitable external driver remains necessary for current and voltage levels beyond the MCU's direct I/O capability.
پیشنهادی
Access-Control Peripheral
The MKL16Z64VFM4 fits an electronic lock, reader, or access-control peripheral that requires USB connectivity and compact embedded logic. The integrated USB interface supports configuration and communication with a host, while the Cortex-M0+ core manages credential processing, status LEDs, relay control, and anti-tamper inputs. With 64 KB of flash, firmware should be streamlined and can use external nonvolatile storage for logs if the application requires an audit trail. The small HVQFN package permits placement near a connector, but USB trace geometry and power filtering must still be designed according to the manufacturer guidance. Security-sensitive products should add appropriate authentication, key protection, and physical attack countermeasures beyond the MCU's basic peripheral set.
پیشنهادی
Low-Power Instrumentation
The MKL16Z64VFM4 is appropriate for low-power instrumentation that performs measurement, local control, and USB reporting in a small enclosure. Its 48 MHz operating rate supports responsive digital filtering and control, while the Kinetis KL1 platform provides a compact combination of flash, analog functions, and USB. The 64 KB flash limit favors focused applications with a modest firmware footprint, so avoid adding large graphical frameworks or redundant protocol stacks unless memory is expanded. Select the appropriate supply voltage for the analog front end and digital circuitry, and use separate filtering as needed to prevent switching activity from degrading measurement accuracy. Low-power operation should be verified through the manufacturer's clock, run, sleep, and stop-mode procedures.
پیشنهادی
Portable Connected Device
The MKL16Z64VFM4 works well in portable connected equipment where USB is the preferred interface and the enclosure limits PCB area. A wearable accessory, configuration tool, or portable test fixture can use the integrated USB controller for data exchange and the analog peripherals for sensing or control. The 5 mm by 5 mm HVQFN package minimizes footprint, but its exposed pad requires careful PCB design to support electrical and thermal performance. Keep USB routing short, provide a continuous reference plane, and isolate sensitive analog sections from connector and charger-related noise. Firmware can remain in the 64 KB flash budget when the application performs focused sensing and control rather than demanding a large user interface or extensive local storage.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای MKL16Z64VFM4 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | MKL16Z64VFT4 | MKL16Z128VFT4 | MKL16Z128VFM4 | MKL17Z64VFM4 | MKL17Z128VFM4 |
|---|---|---|---|---|---|---|
| Package | 32-HVQFN (5x5 mm) | 32-HVQFN (5x5 mm) | 32-HVQFN (5x5 mm) | 32-HVQFN (5x5 mm) | 32-HVQFN (5x5 mm) | 32-HVQFN (5x5 mm) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| CPU Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 64 KB | 128 KB | 128 KB | 64 KB | 128 KB |
| Architecture Width | 32 bits | 32 bits | 32 bits | 32 bits | 32 bits | 32 bits |
تفاوتهای کلیدی
- Lower flash option for focused firmware (در مقابلMKL16Z128VFM4)
- Cortex-M0+ processing class (در مقابلMKL17Z64VFM4)
- Identical core and clock performance in the matching KL16 option (در مقابلMKL16Z64VFT4)
یادداشتهای طراحی
Build the footprint from the NXP package drawing for the 32-pin HVQFN rather than from the 5 mm by 5 mm body dimensions alone. Confirm the exposed-pad geometry, solder-mask opening, paste pattern, and thermal-via arrangement. Place the required input, output, and decoupling capacitors close to their corresponding pins, and keep the exposed-pad connection consistent with the manufacturer's grounding and thermal guidance.
Route USB D+ and D- as a short, symmetrical pair over a continuous ground plane and avoid stubs or layer transitions beneath the interface. Keep switching regulators, motor drivers, and high-current outputs away from the MCU's analog and USB paths. Provide filtering appropriate to the supply rails, and use a quiet ground strategy so that sensor measurements are not corrupted by digital or USB return currents.
Select the 1.8 V, 2.5 V, or 3.3 V operating option that matches the system voltage plan, but confirm every peripheral's input range before sharing a rail. Place bulk capacitance near the load and local ceramic decoupling directly at the MCU supply pins. Review clock and peripheral operating modes with the manufacturer guidelines because USB and analog functions have their own voltage and timing constraints.
Do not treat a same-package family member as an automatic drop-in substitute. Verify pin assignments, flash organization, core type, peripheral differences, memory map expectations, boot configuration, and temperature or orderable-code attributes. In particular, a move from 64 KB to 128 KB flash or from Cortex-M0+ to Cortex-M4 can change software timing and peripheral behavior even when the PCB land pattern remains the same.
اطلاعات انطباق
Compliance attributes were not explicitly stated in the manufacturer listing snippets or other supplied records. Request current declarations and qualification documentation through the Request a Quote form.