NXP Semiconductors

MKL16Z64VFM4 - 48MHz Cortex-M0+ 64KB MCU | NXP

N.º da peça: MKL16Z64VFM4 ✓ Ativo
1.8 V, 2.5 V, or 3.3 V Vdss 32-pin HVQFN Package 48 MHz Speed 64 KB Memory
MOQ: 1 |

MKL16Z64VFM4 Visão geral

NXP Semiconductors MKL16Z64VFM4 is a 32-bit ARM Cortex-M0+ Kinetis KL1 microcontroller operating up to 48 MHz, with 64 KB of programmable flash memory and USB and analog peripherals in a 32-pin HVQFN package measuring 5 mm by 5 mm. The device targets low-power embedded systems where compact size, USB connectivity, and a general-purpose ARM microcontroller architecture are important.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface logic on one device. The Cortex-M0+ core belongs to the ARM microcontroller product hierarchy, where its compact instruction set and deterministic operation support cost-sensitive embedded control. Within NXP's product portfolio, the Kinetis KL1 family combines this efficient core with low-power design options and USB connectivity for connected peripherals, industrial controls, and compact consumer equipment.

The MKL16Z64VFM4 provides 64 KB of flash, a 48 MHz maximum operating frequency, and a 32-bit architecture. Its integrated USB capability allows a design to communicate with a host without adding a separate USB interface controller. Analog peripherals support applications that must measure or control real-world signals, while the 5 mm by 5 mm HVQFN package reduces board area compared with larger leaded microcontrollers. Supported operating-voltage options listed for the device include 1.8 V, 2.5 V, and 3.3 V.

The Kinetis architecture is suited to low-power embedded designs because the processor and peripherals are optimized for efficient control workloads. Flash memory retains programmed firmware when power is removed, and the Cortex-M0+ platform provides a familiar instruction set and development ecosystem. Because the MKL16Z64VFM4 has limited 64 KB flash capacity, firmware planning should account for code size, boot code, application logic, and configuration data before finalizing the product's feature set.

Typical uses include USB-connected data loggers, compact industrial sensing modules, motor and valve controllers, access-control peripherals, and low-power instrumentation. A USB data logger can use the integrated interface for enumeration and data transfer, while an industrial controller can apply analog peripherals to sensor acquisition and digital outputs to actuators. The small package is especially useful when the PCB area is constrained but full-size leaded packages are undesirable.

When laying out the PCB, place input, output, and decoupling capacitors close to their associated power pins, and route the exposed pad to the thermal and ground structure required by the manufacturer package drawing. Preserve USB-signal routing geometry and provide a clean, continuous ground path beneath the interface. Firmware and peripheral assignments should be checked against the manufacturer's reference manual and device configuration guidance before production.

This product record combines the exact device identity, core, memory, frequency, package, connectivity, and sourcing information with same-family alternatives and practical integration guidance. It helps engineers assess whether the 32-pin Kinetis KL1 MCU matches a board footprint, power architecture, USB requirement, and embedded firmware budget before committing to a design.

Alternativas drop-in para MKL16Z64VFM4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MKL16Z64VFM4 (mesmo formato e footprint) — diferindo em Package, Flash Memory, Product Family.

NXP Semiconductors
Package: 48-QFN (7x7 mm) with exposed pad
Comparar com MKL16Z64VFM4 →
NXP Semiconductors
Package: 32-QFN (5 x 5 mm)
Comparar com MKL16Z64VFM4 →
NXP Semiconductors
Package: 32-HVQFN (5x5 mm) with exposed pad
Flash Memory: 64 KB (64K x 8)
Product Family: Kinetis KL2x (Kinetis L)
Comparar com MKL16Z64VFM4 →

MKL16Z64VFT4R

✅ Drop-In
NXP Semiconductors
📦 32-HVQFN (5x5 mm)
ARM Cortex-M0+ (32-bit) · 48 MHz · 64 KB (64K x 8) · 8 KB · 1.71 V to 3.6 V · USB 2.0 Full-Speed Device with on-chip transceiver · Up to 8x36 or 4x40 segments · 12-bit SAR, up to 16 single-ended channels

Consulte o preço

Ver ficha técnica →

MKL16Z128VFT4

✅ Drop-In
📦 32-HVQFN (5x5 mm)
Flash increases from 64 KB to 128 KB, a 100% increase, while retaining the 48 MHz Cortex-M0+ and 32-pin HVQFN family configuration.

📋 Alternativa de referência (fora do catálogo)

MKL16Z128VFM4

✅ Drop-In ⚠️ Especificações não verificadas
📦 32-HVQFN (5x5 mm)
Flash increases from 64 KB to 128 KB, a 100% increase, with the same 48 MHz Cortex-M0+ performance class and matching 32-pin HVQFN footprint.

📋 Alternativa de referência (fora do catálogo)

MKL17Z64VFM4

✅ Drop-In ⚠️ Especificações não verificadas
NXP Semiconductors
📦 32-HVQFN (5x5 mm)
32-bit ARM Cortex-M0+ microcontroller · Kinetis KL1 · ARM Cortex-M0+ · 48 MHz · 64 KB · 64K x 8 bits · USB 2.0 · 32-QFN (5 x 5 mm)

Consulte o preço

Ver ficha técnica →

MKL17Z128VFM4

✅ Drop-In ⚠️ Especificações não verificadas
📦 32-HVQFN (5x5 mm)
Combines 128 KB flash, a 100% increase over 64 KB, with the Cortex-M4-based MKL17 family and matching 32-pin HVQFN footprint.

📋 Alternativa de referência (fora do catálogo)

MKL16Z64VFM4 Classificações máximas e características elétricas

Product Type 32-bit ARM Cortex-M0+ microcontroller
Product Family NXP Kinetis KL1 sub-family
Maximum CPU Frequency 48 MHz
Flash Memory 64 KB
Flash Organization 64K x 8 bits
CPU Architecture ARM Cortex-M0+
Word Size 32 bits
Operating Voltage Options 1.8 V, 2.5 V, or 3.3 V
USB Interface Integrated USB
Analog Peripherals Integrated analog peripherals
Package Type 32-pin HVQFN
Package Dimensions 5 mm x 5 mm
Contagem de pinos 32 pins
Tipo de montagem Surface mount
Status do ciclo de vida Active
Manufacturer NXP Semiconductors

Guia de Configuração de Pinos do MKL16Z64VFM4 5 mm x 5 mm

Configuração de pinos para MKL16Z64VFM4 (pacote 5 mm x 5 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 5 mm x 5 mm para MKL16Z64VFM4

Nenhum dado detalhado de pinagem disponível para MKL16Z64VFM4.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MKL16Z64VFM4 é adequado para 6 aplicaçãos: USB Data Logger, Industrial Sensor Node, Compact Motor Controller, Access-Control Peripheral, Low-Power Instrumentation, Portable Connected Device.

🖥️

USB Data Logger

The MKL16Z64VFM4 fits a compact USB data logger because its 48 MHz ARM Cortex-M0+ core can service USB traffic while processing sensor data, and its integrated USB peripheral removes the need for a separate host controller. The 64 KB flash capacity is appropriate for firmware, configuration records, and a rolling data buffer, although it may require a serial memory device for long-term storage. Its 32-pin 5 mm by 5 mm HVQFN package also preserves PCB space in portable logging equipment. Design the USB D+ and D- route as a controlled impedance pair, provide the required series termination, and keep switching or sensor circuitry away from the USB interface.

🏭

Industrial Sensor Node

The MKL16Z64VFM4 is suitable for a compact industrial sensor node that must acquire analog measurements and report status over USB. Its integrated analog peripherals reduce the need for separate measurement circuitry, while the 48 MHz Cortex-M0+ core provides sufficient control performance for filtering, calibration, and communication tasks. The 64 KB flash budget suits a focused firmware image rather than a large local data repository. Use the 1.8 V, 2.5 V, or 3.3 V option that matches the sensor and interface requirements, and isolate analog and digital return paths appropriately. Firmware should include sensor-specific calibration, diagnostics, and watchdog recovery rather than assuming that an MCU alone satisfies functional safety requirements.

🔧

Compact Motor Controller

The MKL16Z64VFM4 can serve as the logic controller in a compact motor-control system where board area is limited and deterministic embedded processing is required. The 48 MHz Cortex-M0+ core can execute control loops, manage input capture, and supervise external power stages, while the integrated analog peripherals support current or position sensing. The 5 mm by 5 mm HVQFN package leaves more board area for the driver and power components than a larger leaded MCU. Keep switching-node currents away from sensitive analog traces, place decoupling capacitors directly at the supply pins, and verify thermal performance at the maximum motor-drive duty cycle. A suitable external driver remains necessary for current and voltage levels beyond the MCU's direct I/O capability.

🔒

Access-Control Peripheral

The MKL16Z64VFM4 fits an electronic lock, reader, or access-control peripheral that requires USB connectivity and compact embedded logic. The integrated USB interface supports configuration and communication with a host, while the Cortex-M0+ core manages credential processing, status LEDs, relay control, and anti-tamper inputs. With 64 KB of flash, firmware should be streamlined and can use external nonvolatile storage for logs if the application requires an audit trail. The small HVQFN package permits placement near a connector, but USB trace geometry and power filtering must still be designed according to the manufacturer guidance. Security-sensitive products should add appropriate authentication, key protection, and physical attack countermeasures beyond the MCU's basic peripheral set.

📟

Low-Power Instrumentation

The MKL16Z64VFM4 is appropriate for low-power instrumentation that performs measurement, local control, and USB reporting in a small enclosure. Its 48 MHz operating rate supports responsive digital filtering and control, while the Kinetis KL1 platform provides a compact combination of flash, analog functions, and USB. The 64 KB flash limit favors focused applications with a modest firmware footprint, so avoid adding large graphical frameworks or redundant protocol stacks unless memory is expanded. Select the appropriate supply voltage for the analog front end and digital circuitry, and use separate filtering as needed to prevent switching activity from degrading measurement accuracy. Low-power operation should be verified through the manufacturer's clock, run, sleep, and stop-mode procedures.

📱

Portable Connected Device

The MKL16Z64VFM4 works well in portable connected equipment where USB is the preferred interface and the enclosure limits PCB area. A wearable accessory, configuration tool, or portable test fixture can use the integrated USB controller for data exchange and the analog peripherals for sensing or control. The 5 mm by 5 mm HVQFN package minimizes footprint, but its exposed pad requires careful PCB design to support electrical and thermal performance. Keep USB routing short, provide a continuous reference plane, and isolate sensitive analog sections from connector and charger-related noise. Firmware can remain in the 64 KB flash budget when the application performs focused sensing and control rather than demanding a large user interface or extensive local storage.

Resumo dos produtos recomendados

MKL16Z64VFT4 Same Kinetis KL16 configuration with an alternative orderable code Usado em: USB Data Logger, Compact Motor Controller, Portable Connected Device MKL17Z64VFM4 NXP Semiconductors Usado em: USB Data Logger, Industrial Sensor Node, Access-Control Peripheral MKL16Z128VFM4 Higher-flash option for expanded calibration and diagnostics Usado em: Industrial Sensor Node, Low-Power Instrumentation MKL17Z128VFM4 Option with additional flash and Cortex-M4 processing Usado em: Compact Motor Controller, Low-Power Instrumentation MKL16Z128VFT4 Higher-flash option for additional protocol and security code Usado em: Access-Control Peripheral, Portable Connected Device
What are the key specifications of MKL16Z64VFM4 that engineers should know?
The MKL16Z64VFM4 is a 32-bit NXP Kinetis KL1 microcontroller with a 48 MHz ARM Cortex-M0+ core, 64 KB of flash, integrated USB and analog peripherals, and a 32-pin 5 mm by 5 mm HVQFN package. The manufacturer identifies the device as active. These figures place it among compact, low-power MCUs intended for USB-connected embedded control, sensing, and instrumentation designs.
What is the operating frequency of MKL16Z64VFM4?
The MKL16Z64VFM4 operates at up to 48 MHz. According to the NXP product listing, the device uses a 32-bit ARM Cortex-M0+ core, which combines the compact Cortex-M instruction set with digital signal-processing extensions for efficient control and mixed-signal workloads. Clock configuration, peripheral timing, and firmware performance should therefore be evaluated using the manufacturer's device reference manual.
How much flash memory does MKL16Z64VFM4 have?
The MKL16Z64VFM4 contains 64 KB of flash memory, organized as 64K x 8 bits. This capacity is suitable for compact control firmware, protocol handling, configuration storage, and USB peripheral applications. When sizing the final firmware image, reserve space for startup code, interrupt handlers, bootloader functions, calibration data, and future updates.
Where can I download the MKL16Z64VFM4 datasheet PDF?
The official MKL16Z64VFM4 product page at NXP provides the manufacturer datasheet and related technical documents. Use the linked PDF for authoritative electrical characteristics, pin descriptions, package dimensions, memory maps, and timing information. A separate indexed datasheet copy also identifies the document as the 58-page Kinetis KL16 Sub-Family datasheet, but the NXP-hosted document should be the controlling reference.
Where can I find the MKL16Z64VFM4 pinout?
The MKL16Z64VFM4 pin assignments are shown in the NXP manufacturer datasheet and the associated package drawing. The device uses a 32-pin 5 mm by 5 mm HVQFN package, so the exposed thermal pad must also be considered when assigning the PCB footprint and thermal-via pattern. Use the package drawing for land dimensions rather than estimating them from the body size.
Is MKL16Z64VFM4 suitable for USB-connected embedded devices?
Yes, the MKL16Z64VFM4 is suitable for USB-connected embedded devices because it integrates USB and analog peripherals around a 48 MHz Cortex-M0+ core. It can serve as the central controller in compact data loggers, configuration adapters, industrial sensing nodes, and access-control peripherals. USB bus layout, power requirements, firmware support, and enumeration behavior should be validated against the manufacturer documentation.
What is the difference between MKL16Z64VFM4 and MKL16Z64VFT4?
Both devices are identified as 64 KB Kinetis KL16 Cortex-M0+ microcontrollers, but their orderable configurations must be matched carefully before substitution. MKL16Z64VFM4 is the specified 48 MHz, 32-pin HVQFN ordering code. MKL16Z64VFT4 is another manufacturer-supported ordering code associated with the same core, memory, and 32-pin family, but packaging, temperature, or distribution differences require confirmation from the NXP ordering information.
When should I choose MKL16Z64VFM4 over MKL16Z128VFT4?
Choose MKL16Z64VFM4 when a design needs 64 KB of flash and does not need the additional memory of MKL16Z128VFT4. The 128 KB option provides more code and data space for larger protocols, logging features, or dual-image update arrangements. Both parts belong to the same NXP Kinetis family, but flash capacity, ordering configuration, and exact pin configuration must be checked before treating either as a substitute.
Can MKL16Z64VFM4 be used for industrial sensing and control?
The MKL16Z64VFM4 can be used for industrial sensing and control when its 64 KB flash limit, 48 MHz processing rate, analog peripherals, and 1.8 V, 2.5 V, or 3.3 V operating options satisfy the design. The integrated analog section can reduce external signal-conditioning requirements, while USB can simplify host connectivity. Environmental ratings and operating-temperature limits still require separate qualification for the deployed equipment.
What can replace MKL16Z64VFM4?
The closest same-family drop-in candidates are MKL16Z64VFT4, MKL16Z128VFT4, MKL16Z128VFM4, MKL17Z64VFM4, and MKL17Z128VFM4, subject to final orderable-code verification. They share the NXP Kinetis lineage and use 32-pin 5 mm HVQFN configurations, but memory size or Cortex core can change. Verify the exact pinout, frequency, memory map, peripheral set, and startup configuration before replacement.
Is MKL16Z64VFM4 the same as MKL16Z64VFM4R?
The MKL16Z64VFM4 and MKL16Z64VFM4R refer to closely related NXP orderable configurations, with the R suffix identifying a reeled shipment option in the manufacturer catalog. They should not be treated as separate engineering alternatives because the underlying electrical device is the same and the distinction is packaging-related. The original ordering code must be checked when preparing a BOM or board assembly instruction.
Where can I buy MKL16Z64VFM4 online?
Use the Request a Quote form on this page to request MKL16Z64VFM4 availability, unit pricing, and lead time. The form allows buyers to specify the required quantity and shipment format without relying on a static price table. NXP identifies the part as active, while current commercial availability and delivery timing should be confirmed through the quote request.
What is the price of MKL16Z64VFM4?
The current commercial price for MKL16Z64VFM4 is obtained through the Request a Quote form on this page. The form supports a quantity-specific response and is the appropriate channel because distributor pricing and inventory can change frequently. No fixed price should be embedded in a design comparison because it may not reflect the requested volume, shipment format, or current market position.
What is the lead time and stock status of MKL16Z64VFM4?
Request current stock, minimum order quantity, and lead time for MKL16Z64VFM4 through the Request a Quote form on this page. NXP lists the device as active, but lifecycle status does not by itself guarantee immediate inventory. Including the required quantity, target date, and reel or tray preference in the request helps establish an actionable supply commitment.
Does MKL16Z64VFM4 support RoHS, REACH, and automotive qualification?
The MKL16Z64VFM4 is a general-purpose NXP Kinetis microcontroller, and its exact RoHS, REACH, lead-free, halogen-free, and AEC-Q100 status should be confirmed in the current manufacturer product documentation. These attributes cannot be inferred from the presence of USB or analog peripherals. Use the Request a Quote form to request current compliance and quality documentation for the exact ordering code.

Dados de referência de engenharia para MKL16Z64VFM4 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose MKL16Z64VFM4 for a compact, USB-connected embedded design that needs a 48 MHz Cortex-M0+ core and can work within 64 KB of flash. Its 32-pin 5 mm HVQFN package is appropriate for space-constrained boards with integrated analog sensing. Choose MKL16Z64VFT4 when the same electrical configuration is available under another supported ordering code after shipment and qualification requirements are confirmed. Choose MKL16Z128VFM4 or MKL16Z128VFT4 when firmware, protocol stacks, or update mechanisms require 128 KB, twice the flash of the target device. Choose MKL17Z64VFM4 or MKL17Z128VFM4 when the added Cortex-M4 processing capability justifies a different core and software validation cycle. In every case, verify the exact pinout, exposed-pad layout, memory map, peripheral configuration, boot settings, and operating-temperature grade before releasing a PCB or production BOM.

Comparação com alternativas

Parâmetro Este produto MKL16Z64VFT4 MKL16Z128VFT4 MKL16Z128VFM4 MKL17Z64VFM4 MKL17Z128VFM4
Package 32-HVQFN (5x5 mm) 32-HVQFN (5x5 mm) 32-HVQFN (5x5 mm) 32-HVQFN (5x5 mm) 32-HVQFN (5x5 mm) 32-HVQFN (5x5 mm)
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
CPU Core ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M4 ARM Cortex-M4
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz
Flash Memory 64 KB 64 KB 128 KB 128 KB 64 KB 128 KB
Architecture Width 32 bits 32 bits 32 bits 32 bits 32 bits 32 bits

Principais diferenciais

  • Lower flash option for focused firmware (vs MKL16Z128VFM4)
  • Cortex-M0+ processing class (vs MKL17Z64VFM4)
  • Identical core and clock performance in the matching KL16 option (vs MKL16Z64VFT4)

Notas de projeto

Build the footprint from the NXP package drawing for the 32-pin HVQFN rather than from the 5 mm by 5 mm body dimensions alone. Confirm the exposed-pad geometry, solder-mask opening, paste pattern, and thermal-via arrangement. Place the required input, output, and decoupling capacitors close to their corresponding pins, and keep the exposed-pad connection consistent with the manufacturer's grounding and thermal guidance.

Route USB D+ and D- as a short, symmetrical pair over a continuous ground plane and avoid stubs or layer transitions beneath the interface. Keep switching regulators, motor drivers, and high-current outputs away from the MCU's analog and USB paths. Provide filtering appropriate to the supply rails, and use a quiet ground strategy so that sensor measurements are not corrupted by digital or USB return currents.

Select the 1.8 V, 2.5 V, or 3.3 V operating option that matches the system voltage plan, but confirm every peripheral's input range before sharing a rail. Place bulk capacitance near the load and local ceramic decoupling directly at the MCU supply pins. Review clock and peripheral operating modes with the manufacturer guidelines because USB and analog functions have their own voltage and timing constraints.

Do not treat a same-package family member as an automatic drop-in substitute. Verify pin assignments, flash organization, core type, peripheral differences, memory map expectations, boot configuration, and temperature or orderable-code attributes. In particular, a move from 64 KB to 128 KB flash or from Cortex-M0+ to Cortex-M4 can change software timing and peripheral behavior even when the PCB land pattern remains the same.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance attributes were not explicitly stated in the manufacturer listing snippets or other supplied records. Request current declarations and qualification documentation through the Request a Quote form.

Dados verificados em: 2026-11-14 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

MKL16Z64VFM4 datasheet MKL16Z64VFM4 pinout MKL16Z64VFM4 datasheet pdf MKL16Z64VFM4 schematic MKL16Z64VFM4 equivalent MKL16Z64VFM4 replacement MKL16Z64VFM4 cross reference MKL16Z64VFM4 vs MKL16Z64VFT4 MKL16Z64VFM4 footprint MKL16Z64VFM4 application circuit MKL16Z64VFM4 price MKL16Z64VFM4 stock NXP MKL16Z64VFM4 MKL16Z64VFM4 48MHz 64KB

Componentes & termos relacionados

NXP Semiconductors MKL16Z64VFM4 MKL16Z64VFT4 MKL16Z128VFT4 MKL16Z128VFM4 MKL17Z64VFM4 MKL17Z128VFM4 ARM Cortex-M0+ ARM Cortex-M4 Kinetis KL1 Kinetis KL16 microcontroller embedded microcontroller 32-bit microcontroller USB analog peripherals HVQFN-32 QFN family surface mount SMD 64 KB flash memory 48 MHz clock 1.8 V 2.5 V 3.3 V low-power embedded systems
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ