MPC8536EAVTANGA - PowerQUICC III e500 MPU 800MHz | NXP
MPN: MPC8536EAVTANGA ✓ فعالMPC8536EAVTANGA نمای کلی
What is a PowerQUICC III processor? PowerQUICC III is the third generation of Freescale/NXP's PowerQUICC communications processor line, designed for embedded networking and SoC integration. It belongs to the broader category of communications processors (MPUs/MPSoCs) in the processor hierarchy: SoC -> MPU -> communications processor -> PowerQUICC. These parts are widely deployed in routers, switches, industrial gateways, and security appliances where deterministic networking performance and integrated peripherals reduce BOM cost.
Key features of the MPC8536E include a 32-bit e500 core at 800 MHz, hardware-accelerated encryption via the SEC engine, integrated SATA 1.5Gbps, two PCIe interfaces, dual Gigabit Ethernet MACs, USB 2.0, SDHC, and DDR2/DDR3 memory controller. The device supports multiple voltage rails (1.0V core, 1.5V/1.8V/2.5V/3.3V I/O) and operates across 0C to 90C (commercial temperature grade).
Architecturally, the MPC8536E uses a 90 nm process and a system interconnect fabric that arbitrates between the e500 core and the integrated peripheral controllers. The SEC engine accelerates DES, 3DES, AES, and public-key crypto, offloading security from the main CPU. The DDR2/DDR3 controller includes ECC support, and the dual GbE MACs support RGMII/SGMII for flexible PHY interfacing.
Typical applications include IP routers and switches, network attached storage (NAS), industrial control and automation gateways, telecom line cards, security appliances (firewalls, VPN), and multi-function printers with embedded web servers. The integrated SEC engine and GbE make it especially suited for secure network edge equipment.
Designers should note that the 783-FCBGA package requires careful PCB layout with microvia technology and matched-length routing for DDR3 and PCIe lanes. Adequate thermal management is essential: at 0C to 90C the part is rated for commercial environments; for industrial deployments, consider the MPC8536E industrial temperature variants.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone. Engineers evaluating the MPC8536EAVTANGA for new designs or as a drop-in replacement will find cross-reference alternatives, application guidance, and lifecycle status here.
جایگزین‌های drop-in برای MPC8536EAVTANGA — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای MPC8536EAVTANGA (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Ethernet, Operating Temperature, Package, Memory Controller, Core Architecture.
MPC8536AVTANGA
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
MPC8536AVJANGA
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
MPC8536BVJANGA
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←MPC8536EAVTANGB
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
MPC8536EAVTAVLA
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←MPC8536EAVTANGA حداکثر مقادیر مجاز و مشخصات الکتریکی
| Processor Type | MPU PowerQUICC III MPC85xx |
| Core Architecture | PowerPC e500 (32-bit) |
| Number of Cores | 1 |
| Core Frequency | 800 MHz |
| بسته‌بندی | 783-FCBGA (29x29 mm) |
| Process Technology | 90 nm CMOS |
| Core Voltage | 1.0 V |
| I/O Voltage Rails | 1.5 V / 1.8 V / 2.5 V / 3.3 V |
| Memory Controller | DDR2 / DDR3 with ECC |
| Ethernet | 2 x 10/100/1000 (RGMII / SGMII) |
| PCI Express | 2 x PCIe lanes |
| SATA | 1 x SATA 1.5 Gbps |
| USB | USB 2.0 (Host + Device) |
| Security Engine (SEC) | DES / 3DES / AES / Public Key |
| SDHC | 1 x SDHC controller |
| دمای کاری | 0C to 90C |
| نوع نصب | Surface Mount (BGA) |
| وضعیت RoHS | Compliant |
راهنمای پیکربندی پین MPC8536EAVTANGA 783-fcbga (29x29 mm)
پیکربندی پین برای MPC8536EAVTANGA (پکیج 783-fcbga (29x29 mm)). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.
داده پین‌آوت تفصیلی موجود نیست برای MPC8536EAVTANGA.
به دیتاشیت برای پیکربندی کامل پین‌ها.
کاربردهای معمول
MPC8536EAVTANGA مناسب است برای 7 کاربردs: IP Network Router / Switch, Network Attached Storage (NAS), Industrial Protocol Gateway, Telecom Line Card / Network Appliance, Security Appliance (Firewall / VPN), Multi-Function Printer / Imaging, Smart Energy / Smart Grid Gateway.
IP Network Router / Switch
The MPC8536EAVTANGA is a strong fit for IP network routers and switches due to its 800 MHz e500 core combined with dual Gigabit Ethernet MACs (RGMII/SGMII) and two PCIe lanes. The integrated SEC engine provides hardware-accelerated IPsec, SSL/TLS, and public-key cryptography used in VPN termination and secure routing. The DDR2/DDR3 controller with ECC handles the routing tables and packet buffers at wire speed. Compared to pure switching ASICs, the MPC8536E enables control-plane processing (OSPF, BGP, RIP, QoS) on the same SoC. Use it in residential gateways, SMB routers, and enterprise branch routers where Linux/Yocto support and security acceleration are required on a single chip.
پیشنهادی
Network Attached Storage (NAS)
The MPC8536EAVTANGA is well matched to entry-level NAS appliances because it integrates a SATA 1.5 Gbps port for direct hard-drive attachment, dual GbE for LACP link aggregation, and a USB 2.0 port for external backup or printer sharing. The e500 core at 800 MHz runs Linux-based NAS stacks (Samba, NFS, AFP) efficiently, while the SDHC controller supports boot from microSD for fast OS updates. The integrated SEC engine secures HTTPS-based web management and SMB3 encrypted transfers without burdening the CPU. Designers typically pair the MPC8536E with one or two SATA drives and a small DDR3 ECC buffer in 2-bay home/SOHO NAS enclosures.
پیشنهادی
Industrial Protocol Gateway
The MPC8536EAVTANGA serves industrial protocol gateways by providing deterministic serial/PCIe interfaces to PROFINET, EtherNet/IP, Modbus TCP, or CAN fieldbuses via expansion peripherals. Its GbE ports handle industrial Ethernet traffic while the SEC engine secures VPN tunnels back to the cloud or enterprise. The 800 MHz e500 core is sufficient to run protocol-conversion stacks (e.g., EtherNet/IP to Modbus gateway) with sub-10 ms latency. The commercial 0C to 90C temperature range suits factory-floor cabinets; for harsher deployments, pair with the industrial-temperature sibling variants. Linux BSPs with real-time PREEMPT_RT patches are widely available for this part.
پیشنهادی
Telecom Line Card / Network Appliance
The MPC8536EAVTANGA is widely deployed in telecom line cards and network appliances where multiple GbE uplinks, packet classification, and QoS are needed on a single chip. Its two PCIe lanes enable connection to external switching or PHY devices, while the SATA port supports on-board storage for logs and packet capture. The integrated security engine accelerates bulk IPsec, MACsec, or TLS termination for VPN concentrators and SBC (session border controller) applications. With Linux and NXP SDK support, developers can rapidly deploy services on the e500 core for OAM, DHCP, RADIUS, or DPI functions in metro Ethernet and LTE small-cell base stations.
پیشنهادی
Security Appliance (Firewall / VPN)
The MPC8536EAVTANGA is highly suitable for small/medium business firewalls and VPN appliances due to its hardware-accelerated SEC engine, which performs DES, 3DES, AES, and public-key operations at hundreds of Mbps without loading the CPU. Combined with two GbE ports (WAN/LAN segmentation) and PCIe expansion for additional NICs, the device supports line-rate IPsec tunnels in the 200-400 Mbps range typical for branch-office firewalls. The e500 core runs Linux iptables/nftables or OpenWrt-derived stacks with full stateful inspection. ECC-protected DDR3 prevents soft-error-induced packet corruption in security logging.
پیشنهادی
Multi-Function Printer / Imaging
The MPC8536EAVTANGA fits in multi-function printer controllers and imaging systems that require embedded web servers, scan-to-email, and secure printing over IP networks. The e500 core at 800 MHz runs embedded web stacks (lighttpd/nginx) and image-processing pipelines, while the SEC engine secures SMTP-TLS and HTTPS web UIs. The SDHC controller enables front-panel SD-card slots for direct scan-to-card workflows, and USB 2.0 supports external devices. The DDR2/DDR3 controller with ECC is critical for handling large image buffers without data corruption in production imaging environments.
پیشنهادی
Smart Energy / Smart Grid Gateway
The MPC8536EAVTANGA fits smart-grid and smart-metering gateways that aggregate data from multiple meters (HAN/NAN networks) and forward it over secure IP links to utility backhaul. Its dual GbE, PCIe, and USB support a wide range of PHY and short-range radio modems. The SEC engine provides hardware acceleration for TLS/DTLS authentication used in DLMS/COSEM or IEEE 2030.5 smart-energy protocols. With Yocto Linux and PREEMPT_RT real-time patches, deterministic latency on metering traffic is achievable, while the commercial temperature grade suits outdoor cabinets with thermal management.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای MPC8536EAVTANGA — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | MPC8536AVTANGA | MPC8536AVJANGA | MPC8536BVJANGA | MPC8536EAVTANGB | MPC8536EAVTAVLA |
|---|---|---|---|---|---|---|
| Package | 783-FCBGA (29x29) | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | PowerPC e500 (32-bit) | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 |
| Core Frequency | 800 MHz | 800 MHz | 800 MHz | 800 MHz | 800 MHz | 800 MHz |
| SEC Security Engine | Enabled (DES/3DES/AES/PKA) | Disabled | Disabled | Enabled | Enabled | Enabled |
| DDR2/DDR3 Controller | Yes (with ECC) | Yes | Yes | Yes | Yes | Yes |
| Gigabit Ethernet | 2 x GbE (RGMII/SGMII) | 2 x GbE | 2 x GbE | 2 x GbE | 2 x GbE | 2 x GbE |
| Operating Temperature | 0C to 90C | 0C to 90C | 0C to 90C | 0C to 90C | 0C to 90C | Variant grade - verify via confirm |
تفاوت‌های کلیدی
- Integrated hardware security engine (SEC) for IPsec/TLS acceleration (در مقابلMPC8536AVTANGA)
- DDR2/DDR3 controller with hardware ECC (در مقابلGeneric ARM SoCs at same clock speed)
- Dual Gigabit Ethernet with RGMII/SGMII flexibility (در مقابلLower-tier PowerQUICC II MPC8272)
یادداشت‌های طراحی
The MPC8536EAVTANGA's 783-FCBGA package with 1.0 mm ball pitch requires a PCB stack-up with microvia (laser-drilled) technology on at least the top signal layer. Use a 6-8 layer stack-up with dedicated ground and power planes. Match the DDR3 trace lengths within +/-25 mil and the PCIe lanes within +/-150 mil for signal integrity. Place decoupling capacitors (0.1 uF and 10 uF ceramic) directly under the BGA on the bottom side, using the escape-via pattern recommended in the NXP hardware design guide. Reference the MPC8536E design checklist before tape-out.
Estimated power dissipation for the MPC8536EAVTANGA at 800 MHz is 3-6 W depending on peripheral activity. With a typical FCBGA theta-JA of 15-20 C/W, junction temperature can rise 45-90C above ambient under full load. Provide at least 1 square inch of unbroken copper ground pour on the top layer under the FCBGA, plus thermal vias (0.3 mm drill, 0.5 mm pitch) connecting to internal ground planes. For sealed enclosures without airflow, consider a heatsink or thermal interface material. Validate junction temperature in the worst-case ambient using the NXP power-estimation spreadsheet.
The MPC8536EAVTANGA requires multiple voltage rails: 1.0 V core, 1.5 V DDR3, and 3.3 V I/O. Use a sequenced power supply with the 1.0 V core rail ramping up before the I/O rails. Place bulk capacitors (100 uF tantalum or polymer) within 50 mm of the BGA, and add 22 uF ceramic bulk caps per rail. Use a dedicated PMIC or DC-DC controller that supports power-good sequencing - violations can cause latch-up. Verify the DDR3 VTT termination voltage (typically 0.75 V for DDR3) is sourced from a low-impedance regulator capable of sourcing/sinking at least 1 A.
Common design pitfalls for the MPC8536EAVTANGA include: (1) forgetting to configure the e500 core PLL correctly - the default reset configuration may not match the target core frequency; (2) mis-wiring the DDR3 address/control lines - check the byte-lane mapping against the schematic; (3) leaving unused PCIe lanes floating - they must be AC-coupled or terminated; (4) omitting the SPI flash chip-select for boot - the device expects a bootable image on SPI flash or NOR flash at reset; (5) using the wrong I/O voltage for SDHC - 3.3 V signaling required. Always run the NXP validation suite on first silicon to catch issues.
اطلاعات انطباق
RoHS compliant and lead-free per NXP product page. AEC-Q100 not applicable - this is a commercial/industrial communications processor, not an automotive-grade device. For automotive-grade variants of the PowerQUICC family, separate part numbers with Q-suffixes exist.