MSP430F2417TPN - 16MHz 92KB MCU | Texas Instruments | Embedded Control
MPN: MSP430F2417TPN ✓ فعالMSP430F2417TPN نمای کلی
A mixed-signal microcontroller combines a digital processor with analog measurement or control peripherals on one integrated device. The MSP430F2417 belongs to the MSP430F2xx family, a hierarchy of low-power MCU, RISC microcontroller, embedded controller, and semiconductor. Its architecture uses 16-bit registers and a RISC instruction set, while five low-power modes support battery-powered and portable measurement systems that must remain responsive while consuming little energy.
Key features include 92 KB of Flash, 8 KB of SRAM, a 12-bit ADC, an on-chip comparator, a hardware multiplier, and I2C, SPI, and UART interfaces. The 16 MHz operating speed provides deterministic control performance, while the 256-byte information Flash area can retain configuration or calibration information. The -40°C to +105°C operating range supports industrial instrumentation and other systems requiring extended-temperature operation.
The MSP430 CPU16 architecture emphasizes efficient register-based operation and low power consumption. Its peripheral set allows a design to measure an analog input, execute control logic, and communicate through a serial interface without requiring separate analog and communication components. The hardware multiplier accelerates multiply and multiply-accumulate operations commonly used in digital signal processing, filtering, and fixed-point control calculations.
Typical uses include industrial sensor acquisition, portable measurement instruments, data loggers, low-power industrial controllers, and embedded systems that require multiple serial interfaces. The combination of extended temperature range, integrated mixed-signal resources, and 80-pin connectivity is useful when designers need more I/O than a small-package MCU provides without moving to a more complex processor architecture.
PCB planning should account for the large exposed thermal and grounding footprint typical of an 80-pin LQFP. Place decoupling capacitors near the supply pins, route sensitive analog inputs away from switching nodes and communication edges, and use the pin-description table in the manufacturer datasheet when assigning every signal.
This page organizes the MSP430F2417TPN specifications, package information, selection guidance, and application considerations into a design-focused resource for engineers evaluating 16-bit MSP430 mixed-signal microcontrollers.
جایگزینهای drop-in برای MSP430F2417TPN — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای MSP430F2417TPN (همان فرمفاکتور و فوتپرینت) — متفاوت در Hardware Multiplier, Package, ADC Resolution, CPU Architecture, Flash Memory.
MSP430F2616TPN
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←MSP430F2617TPN
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←MSP430F2417TPN حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | 16-bit mixed-signal microcontroller |
| CPU Architecture | MSP430 CPU16 RISC |
| حداکثر فرکانس کلاک | 16 MHz |
| Flash Memory | 92 KB |
| Flash Organization | 92K x 8 bits plus 256 bytes information Flash |
| SRAM | 8 KB |
| ADC Resolution | 12 bits |
| ADC Type | 12-bit successive-approximation ADC |
| Comparator | Integrated |
| Hardware Multiplier | Integrated |
| Serial Interfaces | I2C, SPI, and UART |
| ولتاژ تغذیه | 2.5 V to 3.3 V |
| محدوده دمای کاری | -40°C to +105°C |
| بستهبندی | 80-pin LQFP, 12 mm × 12 mm |
| نوع نصب | Surface mount |
| Low-Power Modes | 5 modes |
راهنمای پیکربندی پین MSP430F2417TPN 80-pin lqfp, 12 mm × 12 mm
پیکربندی پین برای MSP430F2417TPN (پکیج 80-pin lqfp, 12 mm × 12 mm). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای MSP430F2417TPN.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
MSP430F2417TPN مناسب است برای 6 کاربردs: Industrial Sensor Acquisition, Portable Data Logger, Precision Loop Controller, Digital Signal Conditioning, Serial Gateway Controller, Embedded Instrumentation.
Industrial Sensor Acquisition
The MSP430F2417TPN fits industrial sensor-acquisition systems that must convert analog measurements, apply digital filtering, and report results through a serial link. Its 12-bit ADC provides the measurement conversion function, while the 16 MHz MSP430 CPU16 core handles control flow and signal processing. The integrated comparator can support threshold or protection decisions, and the hardware multiplier accelerates fixed-point calculations. With I2C, SPI, and UART available, the controller can connect sensors, external memory, or an industrial host. The -40°C to +105°C rating also supports deployments beyond ordinary room-temperature equipment.
پیشنهادی
Portable Data Logger
The MSP430F2417TPN is suitable for portable data loggers where low-power operation, compactness, and local signal processing are important. Its five low-power modes allow the firmware to reduce activity between measurement intervals, while the 92 KB Flash provides room for application code and logged configuration. The 8 KB SRAM supports buffered sampling and working variables. Engineers can use the 12-bit ADC for sensor inputs, the comparator for detecting thresholds, and UART or SPI for transferring records to a host. The integrated multiplier helps implement digital filtering without adding a separate processing component.
پیشنهادی
Precision Loop Controller
The MSP430F2417TPN can serve as the central controller in a precision analog loop where a sensor is continuously sampled and a control output is updated. The 12-bit ADC measures the feedback signal, the comparator supports fast threshold events, and the 16 MHz CPU16 core executes proportional or integral control calculations. The hardware multiplier improves throughput for multiply-accumulate operations, while 8 KB SRAM accommodates control variables and diagnostic data. Its extended -40°C to +105°C operating range makes it suitable for industrial enclosures when analog isolation and careful PCB layout are also implemented.
پیشنهادی
Digital Signal Conditioning
The MSP430F2417TPN is appropriate for digital signal-conditioning stages that transform sampled analog data into filtered or compensated values. Its 16 MHz CPU16 core and 16-bit registers provide direct computational access, while the hardware multiplier accelerates the multiply-accumulate sequence required by many filters and control algorithms. The 12-bit ADC acquires the incoming signal and the comparator can identify limits or transitions. With 92 KB Flash and 8 KB SRAM, moderate buffering and control code can be consolidated into one device, reducing component count while preserving deterministic real-time behavior.
پیشنهادی
Serial Gateway Controller
The MSP430F2417TPN works as a serial gateway controller when a system must translate between local sensors and an upstream communications network. Its UART, SPI, and I2C interfaces allow multiple protocol-oriented connections to coexist, subject to the final peripheral-channel assignment. The CPU16 core can format data, manage buffering, and execute command logic, while the 8 KB SRAM supports transient message storage. The 80-pin LQFP provides more external connectivity than small-outline MSP430 packages, making this configuration useful for instrumentation that requires several digital inputs, outputs, and communication signals.
پیشنهادی
Embedded Instrumentation
The MSP430F2417TPN is well suited to embedded instrumentation that combines measurement, local computation, diagnostics, and communications. Its 12-bit ADC handles analog channels, the comparator provides a hardware threshold reference, and the hardware multiplier supports calibration and filtering calculations. Firmware can store operating modes and configuration in Flash while using the 8 KB SRAM for live acquisition data. I2C and SPI suit low-bandwidth peripherals, while UART provides a straightforward debug or system interface. The -40°C to +105°C range supports industrial environments when the PCB is designed for thermal reliability and analog signal integrity.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای MSP430F2417TPN — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | MSP430F2616TPN | MSP430F2617TPN |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 80-pin LQFP (PN), 12 mm × 12 mm | 80-pin LQFP (PN) | 80-pin LQFP (PN) |
| CPU Architecture | MSP430 CPU16 16-bit RISC | MSP430 16-bit RISC | MSP430 16-bit RISC |
تفاوتهای کلیدی
- Higher Flash allocation than MSP430F2616TPN (در مقابلMSP430F2616TPN)
- Lower RAM allocation than MSP430F2617TPN (در مقابلMSP430F2617TPN)
- Integrated mixed-signal resources (در مقابلMSP430F2616TPN)
یادداشتهای طراحی
Treat the 80-pin LQFP footprint as a high-pin-count mixed-signal layout. Assign pins from the manufacturer pin-description table, place local supply bypass capacitors at the appropriate power pins, and connect all ground pins to a low-impedance plane. Do not infer analog or digital assignments from neighboring pins because the peripheral multiplexing can vary by device configuration.
Keep analog input traces short and shield them from UART, SPI, and clock-related return currents. Use a continuous ground reference beneath the analog section and route high-current or switching signals away from the ADC inputs. If precision measurement performance is required, follow the analog-layout and grounding recommendations in the MSP430F2417 family datasheet.
Design the 2.5 V to 3.3 V rail so that its voltage remains within the device's operating range during startup, sensor transients, and peripheral activity. Place decoupling capacitors close to their associated supply pins and maintain short return paths. For battery-powered systems, calculate average consumption from each mode's measured current and the active duty cycle rather than relying on a single operating-current value.
Do not treat MSP430F2417, MSP430F2417TPN, and MSP430F2417TPNR as identical ordering terms. The TPN suffix identifies the 80-pin PN package, while TPNR identifies a different shipping configuration. Confirm the exact MPN, pinout, temperature rating, and package drawing before placing an order or substituting an MSP430F26xx device.
اطلاعات انطباق
The manufacturer product and datasheet pages were identified, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not included in the retrieved excerpts.