Texas Instruments

MSP430F2417TPN - 16MHz 92KB MCU | Texas Instruments | Embedded Control

部品番号: MSP430F2417TPN ✓ 生産中
2.5 V to 3.3 V Vdss 80-pin LQFP, 12 mm × 12 mm Package 16 MHz Speed 92 KB Memory
MOQ: 1 |

MSP430F2417TPN 概要

The Texas Instruments MSP430F2417TPN is a 16-bit ultra-low-power mixed-signal microcontroller with a 16 MHz MSP430 CPU16 RISC core, 92 KB of Flash memory, and 8 KB of SRAM. It is housed in an 80-pin LQFP package and operates across the -40°C to +105°C industrial temperature range. The device integrates a 12-bit ADC, comparator, hardware multiplier, and communication interfaces including I2C, SPI, and UART.

A mixed-signal microcontroller combines a digital processor with analog measurement or control peripherals on one integrated device. The MSP430F2417 belongs to the MSP430F2xx family, a hierarchy of low-power MCU, RISC microcontroller, embedded controller, and semiconductor. Its architecture uses 16-bit registers and a RISC instruction set, while five low-power modes support battery-powered and portable measurement systems that must remain responsive while consuming little energy.

Key features include 92 KB of Flash, 8 KB of SRAM, a 12-bit ADC, an on-chip comparator, a hardware multiplier, and I2C, SPI, and UART interfaces. The 16 MHz operating speed provides deterministic control performance, while the 256-byte information Flash area can retain configuration or calibration information. The -40°C to +105°C operating range supports industrial instrumentation and other systems requiring extended-temperature operation.

The MSP430 CPU16 architecture emphasizes efficient register-based operation and low power consumption. Its peripheral set allows a design to measure an analog input, execute control logic, and communicate through a serial interface without requiring separate analog and communication components. The hardware multiplier accelerates multiply and multiply-accumulate operations commonly used in digital signal processing, filtering, and fixed-point control calculations.

Typical uses include industrial sensor acquisition, portable measurement instruments, data loggers, low-power industrial controllers, and embedded systems that require multiple serial interfaces. The combination of extended temperature range, integrated mixed-signal resources, and 80-pin connectivity is useful when designers need more I/O than a small-package MCU provides without moving to a more complex processor architecture.

PCB planning should account for the large exposed thermal and grounding footprint typical of an 80-pin LQFP. Place decoupling capacitors near the supply pins, route sensitive analog inputs away from switching nodes and communication edges, and use the pin-description table in the manufacturer datasheet when assigning every signal.

This page organizes the MSP430F2417TPN specifications, package information, selection guidance, and application considerations into a design-focused resource for engineers evaluating 16-bit MSP430 mixed-signal microcontrollers.

ドロップイン代替品: MSP430F2417TPN — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MSP430F2417TPN (同一形状・フットプリント) — 相違点: Hardware Multiplier, Package, ADC Resolution, CPU Architecture, Flash Memory.

Texas Instruments
Hardware Multiplier: Present
Package: 80-pin LQFP, 12 x 12 mm
ADC Resolution: 12 bit
比較対象 MSP430F2417TPN →
Texas Instruments
Hardware Multiplier: Yes
Package: 80-pin LQFP, 12 mm x 12 mm
ADC Resolution: 12 bit
比較対象 MSP430F2417TPN →

MSP430F2616TPN

✅ ドロップイン
Texas Instruments
📦 80-pin LQFP (PN)
16-bit RISC · 16 MHz · 92 KB · 4 KB · 12 bit · 12 bit · 2 channels · I2C, SPI, and UART

価格はお問い合わせください

データシートを見る →

MSP430F2617TPN

✅ ドロップイン
Texas Instruments
📦 80-pin LQFP (PN)
16-bit RISC · 16 MHz · 92 KB (92K x 8 + 256 B) · 8 KB · 12 bit · 1 · 12 bit · 2

価格はお問い合わせください

データシートを見る →

MSP430F2417TPN 最大定格&電気的特性

Product Type 16-bit mixed-signal microcontroller
CPU Architecture MSP430 CPU16 RISC
最大クロック周波数 16 MHz
Flash Memory 92 KB
Flash Organization 92K x 8 bits plus 256 bytes information Flash
SRAM 8 KB
ADC Resolution 12 bits
ADC Type 12-bit successive-approximation ADC
Comparator Integrated
Hardware Multiplier Integrated
Serial Interfaces I2C, SPI, and UART
電源電圧 2.5 V to 3.3 V
動作温度範囲 -40°C to +105°C
パッケージ 80-pin LQFP, 12 mm × 12 mm
実装タイプ Surface mount
Low-Power Modes 5 modes

MSP430F2417TPN 80-pin lqfp, 12 mm × 12 mm ピン配置ガイド

MSP430F2417TPN (80-pin lqfp, 12 mm × 12 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

MSP430F2417TPN の 80-pin lqfp, 12 mm × 12 mm パッケージピン配置図

詳細なピン配置データはありません: MSP430F2417TPN.

詳細は データシート をご参照ください。

主な用途

MSP430F2417TPN の用途: 6 件s: Industrial Sensor Acquisition, Portable Data Logger, Precision Loop Controller, Digital Signal Conditioning, Serial Gateway Controller, Embedded Instrumentation.

🏭

Industrial Sensor Acquisition

The MSP430F2417TPN fits industrial sensor-acquisition systems that must convert analog measurements, apply digital filtering, and report results through a serial link. Its 12-bit ADC provides the measurement conversion function, while the 16 MHz MSP430 CPU16 core handles control flow and signal processing. The integrated comparator can support threshold or protection decisions, and the hardware multiplier accelerates fixed-point calculations. With I2C, SPI, and UART available, the controller can connect sensors, external memory, or an industrial host. The -40°C to +105°C rating also supports deployments beyond ordinary room-temperature equipment.

🧩

Portable Data Logger

The MSP430F2417TPN is suitable for portable data loggers where low-power operation, compactness, and local signal processing are important. Its five low-power modes allow the firmware to reduce activity between measurement intervals, while the 92 KB Flash provides room for application code and logged configuration. The 8 KB SRAM supports buffered sampling and working variables. Engineers can use the 12-bit ADC for sensor inputs, the comparator for detecting thresholds, and UART or SPI for transferring records to a host. The integrated multiplier helps implement digital filtering without adding a separate processing component.

⚡

Precision Loop Controller

The MSP430F2417TPN can serve as the central controller in a precision analog loop where a sensor is continuously sampled and a control output is updated. The 12-bit ADC measures the feedback signal, the comparator supports fast threshold events, and the 16 MHz CPU16 core executes proportional or integral control calculations. The hardware multiplier improves throughput for multiply-accumulate operations, while 8 KB SRAM accommodates control variables and diagnostic data. Its extended -40°C to +105°C operating range makes it suitable for industrial enclosures when analog isolation and careful PCB layout are also implemented.

🔧

Digital Signal Conditioning

The MSP430F2417TPN is appropriate for digital signal-conditioning stages that transform sampled analog data into filtered or compensated values. Its 16 MHz CPU16 core and 16-bit registers provide direct computational access, while the hardware multiplier accelerates the multiply-accumulate sequence required by many filters and control algorithms. The 12-bit ADC acquires the incoming signal and the comparator can identify limits or transitions. With 92 KB Flash and 8 KB SRAM, moderate buffering and control code can be consolidated into one device, reducing component count while preserving deterministic real-time behavior.

🌐

Serial Gateway Controller

The MSP430F2417TPN works as a serial gateway controller when a system must translate between local sensors and an upstream communications network. Its UART, SPI, and I2C interfaces allow multiple protocol-oriented connections to coexist, subject to the final peripheral-channel assignment. The CPU16 core can format data, manage buffering, and execute command logic, while the 8 KB SRAM supports transient message storage. The 80-pin LQFP provides more external connectivity than small-outline MSP430 packages, making this configuration useful for instrumentation that requires several digital inputs, outputs, and communication signals.

📟

Embedded Instrumentation

The MSP430F2417TPN is well suited to embedded instrumentation that combines measurement, local computation, diagnostics, and communications. Its 12-bit ADC handles analog channels, the comparator provides a hardware threshold reference, and the hardware multiplier supports calibration and filtering calculations. Firmware can store operating modes and configuration in Flash while using the 8 KB SRAM for live acquisition data. I2C and SPI suit low-bandwidth peripherals, while UART provides a straightforward debug or system interface. The -40°C to +105°C range supports industrial environments when the PCB is designed for thermal reliability and analog signal integrity.

おすすめ製品の概要

MSP430F2417 Base MSP430F241x mixed-signal MCU family 使用用途: Industrial Sensor Acquisition, Portable Data Logger, Digital Signal Conditioning, Embedded Instrumentation MSP430F2616TPN Texas Instruments 使用用途: Industrial Sensor Acquisition, Precision Loop Controller, Serial Gateway Controller MSP430F2617TPN Texas Instruments 使用用途: Precision Loop Controller, Serial Gateway Controller
What are the key specifications of MSP430F2417TPN that engineers should know?
The MSP430F2417TPN is a 16 MHz, 16-bit mixed-signal microcontroller with 92 KB Flash, 8 KB SRAM, a 12-bit ADC, an integrated comparator, a hardware multiplier, and I2C, SPI, and UART interfaces. It is packaged in an 80-pin LQFP measuring 12 mm × 12 mm and rated for -40°C to +105°C operation. Texas Instruments identifies these core resources on its MSP430F2417 product page.
What is the operating voltage of MSP430F2417TPN?
The MSP430F2417TPN operates from a 2.5 V to 3.3 V supply. This range matches the device description published for the MSP430F2417 and is appropriate for battery-powered and embedded industrial designs that use regulated 2.5 V or 3.3 V rails. Confirm each power pin's connection and decoupling arrangement against the manufacturer pin-description table before releasing the PCB layout.
What memory and processing resources does MSP430F2417TPN provide?
The MSP430F2417TPN provides a 16 MHz MSP430 CPU16 RISC core, 92 KB of Flash, 8 KB of SRAM, and 256 bytes of information Flash. Its 16-bit registers support efficient control and signal-processing work, while the hardware multiplier accelerates multiplication operations. These resources make the device suitable for portable measurement, data logging, and embedded control applications.
Where can I download the MSP430F2417TPN datasheet PDF?
The official MSP430F2417 datasheet is available from Texas Instruments at https://www.ti.com/lit/gpn/MSP430F2417. It covers the MSP430F241x mixed-signal microcontroller family, including the MSP430F2417 device. Use the ordering information and package drawings to confirm that the PN package designation corresponds to the 80-pin LQFP used by MSP430F2417TPN.
Where can I find the MSP430F2417TPN pinout and package drawing?
The MSP430F2417TPN pin assignments and 80-pin LQFP drawing are located in the Texas Instruments MSP430F2417 datasheet under the pin attributes and package information sections. The PN package is a 12 mm × 12 mm LQFP. Assign signals directly from the manufacturer pin-description table so that supply, ground, reset, analog, and port functions retain the correct pin numbers.
Is MSP430F2417TPN suitable for industrial measurement applications?
Yes, the MSP430F2417TPN is suitable for industrial measurement applications that benefit from its -40°C to +105°C rating, 12-bit ADC, comparator, hardware multiplier, and low-power architecture. It can acquire analog measurements, perform control calculations, and communicate through I2C, SPI, or UART. Ensure the PCB layout separates analog inputs from digital and switching signals.
What can replace MSP430F2417TPN on the same 80-pin LQFP footprint?
The closest documented alternatives are MSP430F2616TPN and MSP430F2617TPN, both identified in the MSP430 family comparison material and offered in the 80-pin PN package. They are not identical replacements because memory and peripheral resources differ. Review the complete datasheet, pin table, clock setup, and application-specific requirements before approving either part as a drop-in substitution.
MSP430F2417TPN vs MSP430F2616TPN - which is better for a low-power controller?
MSP430F2417TPN is preferable when 92 KB Flash, 8 KB SRAM, and the documented MSP430F2417 peripheral set are required. MSP430F2616TPN is a related 80-pin MSP430 option with a different memory and peripheral balance, so the selection should follow the exact resource requirements of the firmware. Both families use the MSP430 CPU16 concept and support low-power embedded designs.
When should I choose MSP430F2417TPN over MSP430F2617TPN?
Choose MSP430F2417TPN when its documented 92 KB Flash and 8 KB SRAM configuration matches the application and the MSP430F2417 peripheral set has been validated. Choose MSP430F2617TPN only when its additional resources and pin-level behavior meet the design requirements. The comparison material identifies MSP430F2617 as sharing the target's Flash size while offering more RAM.
Is MSP430F2417 the same as MSP430F2417TPN?
MSP430F2417 is the base device family identifier, while MSP430F2417TPN identifies a specific orderable configuration with the PN package and stated temperature grade. The suffix also distinguishes the exact ordering option from related variants such as tape-and-reel or different package forms. Always perform procurement and pinout checks using the complete MSP430F2417TPN MPN.
Where can I buy MSP430F2417TPN and check current availability?
Use the Request a Quote form on this page to request the current MSP430F2417TPN price, stock status, lead time, and minimum order quantity. Texas Instruments lists MSP430F2417TPN as an orderable part with an 80-pin LQFP package, while distributor pages indicate ordering availability. The quote request provides a direct channel for schedule and quantity confirmation.
What is the price of MSP430F2417TPN?
Current pricing for MSP430F2417TPN should be requested through the Request a Quote form on this page because quote terms, volume, and supply can change. The part is offered in an 80-pin LQFP package and is identified by Texas Instruments as a 16 MHz MCU with 92 KB Flash and 8 KB SRAM. Submit the required quantity and packaging details with the request.
What is the lead time and stock status for MSP430F2417TPN?
Request the current MSP430F2417TPN lead time and stock status through the Request a Quote form on this page. Lead time depends on order quantity, factory schedule, and the selected shipment configuration, so a general availability statement would not be reliable. The exact MPN is MSP430F2417TPN in the 80-pin PN package.
How much power does MSP430F2417TPN consume in low-power operation?
The MSP430F2417TPN provides five low-power modes for reducing consumption during idle and measurement operation, but a single current figure cannot be selected without the operating mode, clock state, and supply voltage. Texas Instruments describes the family as optimized for extended battery life. Use the device's current-consumption characteristics and your duty cycle in the power-budget calculation.
What are the best applications for MSP430F2417TPN?
The MSP430F2417TPN is best suited to portable measurement, industrial sensing, data logging, low-power control, and embedded instrumentation. Its 12-bit ADC supports analog acquisition, the comparator supports threshold decisions, and the hardware multiplier assists filtering or fixed-point calculations. I2C, SPI, and UART provide flexible connectivity to sensors, converters, and host systems.

エンジニアリング参考データ: MSP430F2417TPN — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose MSP430F2417TPN when an industrial or portable design needs a 16 MHz MSP430 CPU16 core, 92 KB Flash, 8 KB SRAM, a 12-bit ADC, comparator, hardware multiplier, and I2C, SPI, and UART in an 80-pin LQFP. Its -40°C to +105°C rating supports extended-temperature equipment. Consider MSP430F2616TPN when its lower Flash allocation better matches the code size and its other resources satisfy the design. Consider MSP430F2617TPN when the same 92 KB Flash is useful but additional SRAM would materially improve buffering or application capability. In every case, verify the complete pin table, peripheral-channel multiplexing, clock configuration, memory limits, and operating requirements. A shared package alone does not guarantee that firmware, registers, peripherals, or interrupt behavior are interchangeable.

代替品との比較

パラメータ この製品 MSP430F2616TPN MSP430F2617TPN
Brand Texas Instruments Texas Instruments Texas Instruments
Package 80-pin LQFP (PN), 12 mm × 12 mm 80-pin LQFP (PN) 80-pin LQFP (PN)
CPU Architecture MSP430 CPU16 16-bit RISC MSP430 16-bit RISC MSP430 16-bit RISC

主な差別化要因

  • Higher Flash allocation than MSP430F2616TPN (vs MSP430F2616TPN)
  • Lower RAM allocation than MSP430F2617TPN (vs MSP430F2617TPN)
  • Integrated mixed-signal resources (vs MSP430F2616TPN)

設計ノート

Treat the 80-pin LQFP footprint as a high-pin-count mixed-signal layout. Assign pins from the manufacturer pin-description table, place local supply bypass capacitors at the appropriate power pins, and connect all ground pins to a low-impedance plane. Do not infer analog or digital assignments from neighboring pins because the peripheral multiplexing can vary by device configuration.

Keep analog input traces short and shield them from UART, SPI, and clock-related return currents. Use a continuous ground reference beneath the analog section and route high-current or switching signals away from the ADC inputs. If precision measurement performance is required, follow the analog-layout and grounding recommendations in the MSP430F2417 family datasheet.

Design the 2.5 V to 3.3 V rail so that its voltage remains within the device's operating range during startup, sensor transients, and peripheral activity. Place decoupling capacitors close to their associated supply pins and maintain short return paths. For battery-powered systems, calculate average consumption from each mode's measured current and the active duty cycle rather than relying on a single operating-current value.

Do not treat MSP430F2417, MSP430F2417TPN, and MSP430F2417TPNR as identical ordering terms. The TPN suffix identifies the 80-pin PN package, while TPNR identifies a different shipping configuration. Confirm the exact MPN, pinout, temperature rating, and package drawing before placing an order or substituting an MSP430F26xx device.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The manufacturer product and datasheet pages were identified, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not included in the retrieved excerpts.

データ検証日: 2026-11-15 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MSP430F2417TPN datasheet MSP430F2417TPN pinout MSP430F2417TPN datasheet pdf MSP430F2417TPN specifications Texas Instruments MSP430F2417TPN MSP430F2417TPN price MSP430F2417TPN stock MSP430F2417TPN replacement MSP430F2417TPN equivalent MSP430F2417TPN vs MSP430F2616TPN MSP430F2417 LQFP-80 pinout MSP430F2417 application circuit

関連部品&用語

Texas Instruments MSP430F2417TPN MSP430F2417 MSP430F2616TPN MSP430F2617TPN MSP430 CPU16 mixed-signal microcontroller RISC microcontroller embedded controller 16-bit microcontroller MSP430F2xx 12-bit ADC comparator hardware multiplier I2C SPI UART Flash memory SRAM ultra-low-power MCU low-power modes LQFP-80 surface mount industrial instrumentation
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示