Texas Instruments

OPA890ID - 130MHz, 500V/us Single Op Amp | Texas Instruments

MPN: OPA890ID ✓ فعال
±1.5 V Vdss 8-pin SOIC Package
حداقل سفارش: 1 |

OPA890ID نمای کلی

Texas Instruments OPA890ID is a low-power, wideband, single voltage-feedback operational amplifier with a disable function, one amplifier per package, a 130 MHz gain-bandwidth product, and a 500 V/us slew rate. Designed for low-voltage operation, the device accepts supply voltages from ±1.5 V to ±6 V and is offered in an 8-pin SOIC package.

A voltage-feedback operational amplifier is an analog signal-conditioning amplifier that uses negative feedback to control gain and bandwidth. The OPA890ID belongs to the operational-amplifier hierarchy and is suitable for precision analog, communications, instrumentation, and signal-processing systems requiring much greater bandwidth than general-purpose amplifiers.

Key characteristics include a 130 MHz gain-bandwidth product, 500 V/us slew rate, single-amplifier configuration, and an operating supply range of ±1.5 V to ±6 V. The wide bandwidth enables closed-loop operation at high frequencies, while the high slew rate supports accurate reproduction of rapidly changing waveforms. The shutdown function allows the amplifier to be disabled when a circuit does not require continuous operation.

The OPA890ID uses a voltage-feedback architecture, which provides a direct relationship between input differential voltage and output voltage through the external feedback network. Its bandwidth and slew-rate characteristics make it appropriate for low-amplitude, high-speed signal paths rather than slow precision-only applications. Designers must account for gain-bandwidth interaction, output-voltage swing, input common-mode range, stability, and the effect of parasitic capacitance at high frequencies.

Typical uses include video and communications signal conditioning, waveform generation, data-conversion interfaces, active filters, and low-level instrumentation. The disable pin can support power management or isolate an amplifier during selected operating modes. In dual-supply systems, the ±1.5 V to ±6 V capability permits operation from low-rail analog and mixed-signal supplies.

PCB implementation should minimize trace length around the feedback network, maintain symmetrical routing, provide a solid ground reference, and place decoupling capacitors close to the supply pins. Feedback-component values should be checked against the selected closed-loop gain and the device's stability requirements. This page combines ordering information, verified electrical details, comparison guidance, and practical high-frequency layout considerations.

جایگزین‌های drop-in برای OPA890ID — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

OPA890IDG4

✅ جایگزین مستقیم
📦 8-pin SOIC
Same OPA890 family and 8-pin SOIC electrical pinout; delivery packaging differs, with no verified change to the 130 MHz bandwidth or 500 V/us slew rate

📋 جایگزین مرجع (خارج از کاتالوگ)

OPA890UA

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-pin SOIC
Same manufacturer and OPA890 family with 8-pin SOIC format; ordering qualification and commercial availability require confirmation, while core 130 MHz bandwidth and 500 V/us slew rate remain family characteristics

📋 جایگزین مرجع (خارج از کاتالوگ)

OPA890ID حداکثر مقادیر مجاز و مشخصات الکتریکی

Amplifier Type Voltage-feedback operational amplifier
Number of Amplifiers 1 amplifier
Number of Circuits 1 circuit
Gain-Bandwidth Product 130 MHz
Slew Rate 500 V/us
Minimum Supply Voltage ±1.5 V
Maximum Supply Voltage ±6 V
Shutdown Control Yes
بسته‌بندی 8-pin SOIC
نوع نصب Surface mount
توپولوژی Single amplifier

راهنمای پیکربندی پین OPA890ID 8-pin soic

پیکربندی پین برای OPA890ID (پکیج 8-pin soic). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 8-pin soic برای OPA890ID

داده پین‌آوت تفصیلی موجود نیست برای OPA890ID.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

OPA890ID مناسب است برای 6 کاربردs: Wideband Communications Signal Conditioning, Data-Conversion Interface, Active Wideband Filtering, Video and Imaging Signal Chains, Precision Instrumentation Front End, Waveform Generation and Buffering.

🌐

Wideband Communications Signal Conditioning

The OPA890ID fits communications front ends that require low-amplitude signals to be amplified without severe bandwidth limitations. Its 130 MHz gain-bandwidth product and 500 V/us slew rate support closed-loop gains and frequencies that are generally unsuitable for conventional low-speed amplifiers. Place the amplifier close to the source and feedback network to limit parasitic feedback. The principal trade-off is that high-speed layouts are more sensitive to board capacitance, grounding, and component tolerances than low-frequency precision stages.

🖥️

Data-Conversion Interface

OPA890ID can serve as the gain or driver stage between a data converter and an external analog network. A 130 MHz gain-bandwidth product offers useful bandwidth margin, while the 500 V/us slew rate helps preserve the edge rate of high-speed signals. The circuit must be designed around the converter's settling requirements and the amplifier's input common-mode and output-swing limits. Keep routing short and maintain a continuous return path between the converter, amplifier, and decoupling network.

🔧

Active Wideband Filtering

The OPA890ID is appropriate for active filters whose useful passband extends beyond the range of general-purpose operational amplifiers. Its 130 MHz gain-bandwidth product supports higher closed-loop bandwidth, and the 500 V/us slew rate reduces slew-related distortion in large-signal transitions. Component tolerances and parasitic capacitance become increasingly important as filter order and bandwidth rise. Use the manufacturer's recommended feedback values and verify stability with the final source and load impedances.

📺

Video and Imaging Signal Chains

OPA890ID can be used in low-amplitude video or imaging paths that require high bandwidth and fast edge response. The 130 MHz gain-bandwidth product is suitable for wideband amplification stages, while the 500 V/us slew rate can improve reproduction of rapid transitions. Video designs must also check output swing, gain linearity, and channel-to-channel matching against the source and load. Short traces and solid ground planes are essential at these signal speeds.

🏭

Precision Instrumentation Front End

The OPA890ID can amplify low-level instrumentation signals when the required bandwidth warrants a wideband amplifier. Its 130 MHz gain-bandwidth product and 500 V/us slew rate support faster measurement and control loops than general-purpose amplifiers, although offset, bias current, and noise specifications must be checked against the required accuracy. Use guarded input routing, careful grounding, and an appropriate low-noise supply. The shutdown function can reduce system activity when a measurement channel is not required.

⚡

Waveform Generation and Buffering

OPA890ID is useful in waveform-generation, buffer, and driver circuits where fast transitions and high loop gain are important. Its 500 V/us slew rate supports rapid output movement, and the 130 MHz gain-bandwidth product gives designers frequency headroom when configuring closed-loop gain. Load capacitance and output-current limits determine whether an additional output stage is needed. Validate output compliance and thermal behavior with the intended load, and keep the feedback network away from high-current switching paths.

خلاصه محصولات پیشنهادی

OPA890IDG4 Same-family 8-pin SOIC ordering option استفاده‌شده در: Wideband Communications Signal Conditioning, Data-Conversion Interface, Video and Imaging Signal Chains, Waveform Generation and Buffering OPA890ID Texas Instruments استفاده‌شده در: Active Wideband Filtering, Precision Instrumentation Front End
What are the key specifications of OPA890ID that engineers should know?
The OPA890ID is a single voltage-feedback operational amplifier with a 130 MHz gain-bandwidth product, 500 V/us slew rate, and a ±1.5 V to ±6 V supply range in an 8-pin SOIC package. According to the Texas Instruments OPA890 product page, it is designed as a low-power, wideband amplifier with a disable function. These specifications make it appropriate for high-speed signal conditioning, communications, active filtering, and data-conversion interface circuits.
Where can I download the OPA890ID datasheet PDF?
The official OPA890ID datasheet can be downloaded from the Texas Instruments OPA890 product page or its linked datasheet URL at https://www.ti.com/lit/gpn/opa890. The document describes the wideband voltage-feedback operational amplifier, ordering information, electrical characteristics, pin configuration, and typical application circuits. Use the manufacturer's document for the complete pin table, limit values, test conditions, and revised performance curves.
Where can I find the OPA890ID pinout?
The OPA890ID pin configuration is shown in the Texas Instruments OPA890 manufacturer datasheet and corresponds to the 8-pin SOIC package identified for this ordering code. The verified part description confirms an 8-pin SOIC device with one amplifier, a 130 MHz gain-bandwidth product, and a shutdown function. Assign PCB tracks from the datasheet pin-description table so that power, feedback, input, output, and disable functions are connected exactly as specified.
Is OPA890ID suitable for high-speed signal conditioning?
The OPA890ID is suitable for high-speed signal conditioning because its 130 MHz gain-bandwidth product and 500 V/us slew rate provide substantial operating speed. According to Texas Instruments, it is a low-power, wideband voltage-feedback operational amplifier with disable. It is particularly useful where signals must be amplified or filtered at frequencies that exceed the practical range of general-purpose operational amplifiers.
What is the OPA890ID power-supply voltage range?
The OPA890ID operates from ±1.5 V to ±6 V. The Texas Instruments ordering information identifies this as the supported supply range for the exact 8-pin SOIC device. Designers should select rail combinations that remain within the limits and should verify signal amplitudes against the input common-mode and output-swing characteristics in the manufacturer datasheet.
What can replace the OPA890ID?
The closest verified drop-in ordering option is OPA890IDG4, which uses the same 8-pin SOIC format and is sourced from the Texas Instruments OPA890 family. A replacement should not be selected from package appearance alone: verify pin assignment, shutdown polarity, supply range, gain-bandwidth product, slew rate, input and output limits, stability, and noise. The available cross-reference results do not establish enough parametric detail to guarantee additional drop-in equivalents.
Is OPA890ID the same as OPA890IDG4?
The OPA890ID and OPA890IDG4 are orderable versions of the same Texas Instruments OPA890 amplifier family in an 8-pin SOIC package, but their order codes can indicate different delivery packaging. Electrically, they share the family's wideband voltage-feedback architecture and disable function. Confirm the orderable drawing and required reel or tube format before treating either order code as interchangeable for procurement.
Where to buy OPA890ID online?
The OPA890ID can be requested through the Request a Quote form on this XAIPART product page. The form is the appropriate route for current commercial availability, quantity requirements, lead time, and a purchase order. The OPA890ID is also listed by major authorized distributors, but availability changes frequently and should be confirmed through the quote workflow for the exact 8-pin SOIC ordering code.
What is the price of OPA890ID?
The current commercial price for OPA890ID is obtained through the Request a Quote form on this page. The quote form reflects quantity, delivery conditions, and current supply more accurately than a static unit-price statement. Request the exact OPA890ID ordering code, required quantity, and shipment destination so the quotation can be tied to the correct 8-pin SOIC configuration.
What is the lead time for OPA890ID?
The current lead time for OPA890ID is confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, delivery packaging, and supply status, so engineers should provide the planned quantity and required arrival date with the request. The manufacturer product page provides the authoritative family ordering and quality information for the OPA890.
Is OPA890ID in stock?
Current OPA890ID inventory status should be requested through the Request a Quote form on this product page. Because stock levels and lead times change, a definitive in-stock statement requires a live quotation for the exact ordering code and quantity. The part is listed as active on the Texas Instruments product page, which confirms current family availability rather than a specific warehouse quantity.
OPA890ID vs OPA890IDG4: which is better for a new design?
OPA890ID and OPA890IDG4 belong to the same Texas Instruments OPA890 family and use the same 8-pin SOIC format, so both can preserve the established PCB footprint. The selection depends primarily on the required orderable delivery format and current commercial terms. Confirm whether the production line requires tube or reel packaging before finalizing the BOM, while retaining identical circuit and layout intent.
When should I choose OPA890ID over a lower-bandwidth operational amplifier?
Choose the OPA890ID when the signal path requires substantially more bandwidth or slew rate than a general-purpose amplifier can provide. Its 130 MHz gain-bandwidth product and 500 V/us slew rate are meaningful for wideband filtering, communications, instrumentation, and data-conversion interfaces. Use a lower-bandwidth amplifier only when its speed is adequate and lower cost, noise, or power requirements are more important.
Is OPA890ID suitable for low-voltage mixed-signal systems?
The OPA890ID can support low-voltage mixed-signal designs because its specified supply range begins at ±1.5 V and extends to ±6 V. This voltage range is relevant to systems powered from low-rail analog, communications, and mixed-signal supplies. The design must still confirm input common-mode range, output swing, stability, and decoupling requirements for the selected rail voltage.
How should OPA890ID feedback and decoupling be laid out?
Route the OPA890ID feedback components with short, direct traces and keep the feedback node physically small to minimize parasitic capacitance. Place supply bypass capacitors close to the supply pins and provide a low-impedance ground return. According to the Texas Instruments OPA890 datasheet, the device is a high-speed voltage-feedback amplifier, so PCB parasitics can materially affect gain, phase margin, and pulse response.
What is the best cross-brand equivalent for OPA890ID?
No cross-brand drop-in equivalent can be confirmed from the available technical records. The cross-reference results contain generic lookup tools and the target OPA890ID listing, but they do not provide candidate MPNs with verified pin assignments and complete electrical ratings. Before substituting another manufacturer's amplifier, verify the 8-pin SOIC pinout, disable behavior, supply range, bandwidth, slew rate, stability, noise, and operating-temperature limits.

داده‌های مرجع مهندسی برای OPA890ID — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose OPA890ID for low-voltage, high-speed signal paths that need more bandwidth and slew rate than a general-purpose amplifier. Its 130 MHz gain-bandwidth product and 500 V/us slew rate make it appropriate for communications, imaging, data-conversion interfaces, wideband filters, and instrumentation. OPA890IDG4 is the practical same-family ordering alternative when its delivery packaging matches the production requirement. OPA890UA may also be considered after confirming order-code qualification and availability, but the available records do not provide enough detail to establish every commercial distinction. If the signal bandwidth is modest and low cost, low power, or low noise is more important, a general-purpose amplifier may be a better selection. Before any substitution, verify the pin assignments, shutdown polarity, supply range, input common-mode range, output swing, stability, noise, and operating-temperature limits.

مقایسه با جایگزین‌ها

پارامتر این محصول OPA890IDG4 OPA890UA
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments
Amplifier Type Voltage-feedback operational amplifier Voltage-feedback operational amplifier Voltage-feedback operational amplifier
Number of Amplifiers 1 amplifier 1 amplifier 1 amplifier
Gain-Bandwidth Product 130 MHz 130 MHz 130 MHz
Slew Rate 500 V/us 500 V/us 500 V/us
Supply Voltage Range ±1.5 V to ±6 V ±1.5 V to ±6 V ±1.5 V to ±6 V
Disable Function Yes Yes Yes
Mounting Type Surface mount Surface mount Surface mount

تفاوت‌های کلیدی

  • Wideband performance in an 8-pin SOIC amplifier (در مقابلOPA890IDG4)
  • Single-amplifier package preserves board area (در مقابلOPA890UA)
  • Dedicated shutdown control supports system power management (در مقابلOPA890IDG4)

یادداشت‌های طراحی

Keep the OPA890ID feedback loop compact and route both feedback legs directly from the output and inverting-input pins to their network components. At 130 MHz bandwidth and 500 V/us slew rate, board capacitance can alter closed-loop gain and phase margin. Avoid routing the sensitive input node beneath the device, keep the output trace away from the input, and use a continuous ground plane beneath the amplifier.

Place the supply bypass capacitor as close as practical to the OPA890ID supply pins and connect it to the same ground reference used by the signal path. Keep the capacitor connection short because trace inductance becomes significant when the amplifier transitions quickly. For dual-supply operation, provide bypass paths for both rails and verify the disable-pin state during power-up to avoid an unintended transient at the output.

Do not select the OPA890 solely by its 130 MHz gain-bandwidth product. Verify closed-loop gain, source and load impedance, output swing, input common-mode range, supply current, noise, and shutdown behavior for the actual operating point. A wideband amplifier that is lightly loaded or driven by excessive capacitance can behave differently from the ideal gain-bandwidth and slew-rate headline figures.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The exact OPA890ID environmental and qualification declarations are not stated in the verified part listings. Consult the Texas Instruments product page and manufacturer datasheet before making a compliance declaration.

تاریخ تأیید داده‌ها: 2026-11-14 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

OPA890ID datasheet OPA890ID pinout OPA890ID datasheet pdf OPA890ID equivalent OPA890ID replacement OPA890ID vs OPA890IDG4 OPA890ID application circuit OPA890ID 130MHz amplifier OPA890ID 500V/us OPA890ID SOIC-8 Texas Instruments OPA890ID OPA890ID price OPA890ID stock OPA890ID lead time

قطعات و اصطلاحات مرتبط

Texas Instruments OPA890ID OPA890IDG4 OPA890UA OPA890 operational amplifier voltage-feedback amplifier single amplifier amplifier IC analog semiconductor 130 MHz gain-bandwidth product 500 V/us slew rate ±1.5 V to ±6 V supply shutdown control disable pin 8-pin SOIC SOIC package family surface-mount package SMD communications signal conditioning data-conversion interface active filter waveform generation precision instrumentation
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ