Texas Instruments

PCM1748KE/2K - 24-Bit Stereo Audio DAC | Texas Instruments

MPN: PCM1748KE/2K ✓ فعال
16-pin SSOP Package 1 kHz Speed
حداقل سفارش: 1 |

PCM1748KE/2K نمای کلی

The Texas Instruments PCM1748KE/2K is a 24-bit stereo audio digital-to-analog converter with a 96 kHz sampling rate in a 16-pin SSOP package. It converts two digital audio channels into left and right analog outputs using enhanced multilevel delta-sigma architecture. The device supports I2S-format digital audio and is designed for compact consumer, communications, and instrumentation systems requiring a low-noise, multichannel audio output stage.

An audio DAC is a signal-conversion integrated circuit that transforms digital audio samples into voltage signals suitable for headphone amplifiers, line-level amplifiers, speakers, or other analog output stages. Within the product hierarchy, a DAC is an interface IC, a data-converter component, and ultimately a semiconductor. The PCM1748 family combines stereo conversion channels, digital input support, analog output circuitry, clocking functions, and filtering in one CMOS integrated circuit.

Key features include 24-bit resolution, 96 kHz sampling, two analog output channels, 106 dB typical signal-to-noise ratio, and enhanced multilevel delta-sigma conversion. The architecture uses fourth-order noise shaping and 8-level amplitude quantization to improve dynamic performance and clock-jitter tolerance. A selectable high-pass filter, dither control, and zero-bit mute functions support practical audio-system calibration and signal management.

The converter architecture separates digital audio processing from the analog output path, allowing an I2S-compatible source to feed the converter through a compact board layout. Its stereo architecture avoids duplicating a single-channel DAC in a separate package, while the 16-pin SSOP format supports small consumer and industrial assemblies. The PCM1748KE/2K ordering code is associated with the PCM1748 device in the Texas Instruments product family.

Typical uses include set-top boxes, television audio, portable consumer equipment, digital music systems, communications terminals, and audio test equipment. The device can also serve as a clean digital-to-analog output subsystem when the downstream amplifier requires a conventional left/right analog input. Its 106 dB typical SNR provides useful dynamic-range margin in designs where the converter is not the limiting noise contributor.

Layout is especially important for a high-resolution delta-sigma converter. Keep analog and digital return paths separated, route the analog outputs away from high-speed clock and serial-data traces, and use the application information in the manufacturer datasheet to select capacitors, filtering options, grounding, and clock connections. Verify the actual output bandwidth and external-component requirements before substituting any functionally similar converter.

This page consolidates the target ordering code, verified product characteristics, same-family drop-in options, application guidance, and engineering considerations into one practical selection reference. It highlights where the PCM1748KE/2K fits and which ordering or family differences must be checked before using another MPN on the same board.

جایگزین‌های drop-in برای PCM1748KE/2K — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای PCM1748KE/2K (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Amplitude Quantization, Digital Audio Interface, Digital Interface, Operating Temperature Range.

Texas Instruments
Package: SSOP-16
Amplitude Quantization: 8-level
Digital Interface: I2S
Texas Instruments
Package: SSOP-16
Digital Interface: 3-wire serial interface
Operating Temperature Range: -25 °C to 85 °C
Texas Instruments
Package: SSOP-16 (DBQ)
Digital Audio Interface: I2S-compatible serial interface
Operating Temperature Range: -25 C to +85 C

PCM1748KE

✅ جایگزین مستقیم
Texas Instruments
📦 16-pin SSOP
24 bit · 96 kS/s · 106 dB · 2 channels · Enhanced multilevel delta-sigma · Fourth order · 8 levels · 4.5 V to 5.5 V

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

PCM1748E/2K

✅ جایگزین مستقیم
Texas Instruments
📦 16-pin SSOP
Stereo audio digital-to-analog converter · 24 bit · 96 kHz · 100 dB typ for PCM1748E at VCC = 5 V · 100 dB typ for PCM1748E · 2 stereo channels · Voltage output · Enhanced multilevel delta-sigma

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

PCM1748KE/2KG4

✅ جایگزین مستقیم
📦 16-pin SSOP
Same 24-bit stereo I2S PCM1748 configuration and 16-pin SSOP package; the G4 ordering suffix differs with 0% change in the listed core conversion parameters.

📋 جایگزین مرجع (خارج از کاتالوگ)

PCM1742KE/2K

✅ جایگزین مستقیم
Texas Instruments
📦 16-pin SSOP
Stereo digital-to-analog converter · 24 bit · 192 kHz · 106 dB · Enhanced multilevel delta-sigma · Fourth order · 8 levels · 2 channels

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

PCM1741E/2K

✅ جایگزین مستقیم
📦 16-pin SSOP
Same manufacturer 16-pin SSOP enhanced multilevel delta-sigma stereo DAC family and 24-bit class; device-specific output and filter behavior must be checked.

📋 جایگزین مرجع (خارج از کاتالوگ)

PCM1748KE/2K حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type Stereo audio digital-to-analog converter
Converter Resolution 24 bit
Maximum Sampling Rate 96 kHz
Number of DAC Channels 2 channels
Analog Output Channels 2 channels
Digital Audio Interface I2S
Typical Signal-to-Noise Ratio 106 dB
Converter Architecture Enhanced multilevel delta-sigma
Noise-Shaping Order Fourth order
Amplitude Quantization 8 levels
Process Technology CMOS
بسته‌بندی 16-pin SSOP
نوع نصب Surface mount
High-Pass Filter 22 Hz at full-scale RMS
Filter Cutoff Frequency 1 kHz

راهنمای پیکربندی پین PCM1748KE/2K 16-pin ssop

پیکربندی پین برای PCM1748KE/2K (پکیج 16-pin ssop). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 16-pin ssop برای PCM1748KE/2K

داده پین‌آوت تفصیلی موجود نیست برای PCM1748KE/2K.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

PCM1748KE/2K مناسب است برای 6 کاربردs: Set-Top Box Audio Output, Television and Monitor Audio, Portable Audio Equipment, Communications and Audio Terminals, Digital Music Player, Audio Test and Measurement.

📺

Set-Top Box Audio Output

The PCM1748KE/2K fits a set-top box that receives 24-bit I2S audio and needs two analog line outputs. Its stereo delta-sigma architecture supports sampling up to 96 kHz, while the two output channels avoid using separate single-channel converters. The 16-pin SSOP package conserves board area, and the 106 dB typical SNR provides useful headroom before amplification. Place the converter close to the audio output routing, keep clock and digital traces away from analog outputs, and use the manufacturer filtering and grounding guidance to preserve low-noise operation.

📺

Television and Monitor Audio

For television, monitor, and display audio designs, the PCM1748KE/2K provides a compact stereo conversion stage from digital audio to left and right analog signals. Its 24-bit resolution, 96 kHz maximum sampling rate, and 106 dB typical SNR suit multimedia content delivered through an I2S source. The 16-pin SSOP package supports space-constrained boards, while programmable filtering, dither, and mute behavior help engineers control signal integration. Clock routing and analog grounding remain critical to prevent switching artifacts from entering the output path.

📱

Portable Audio Equipment

The PCM1748KE/2K can serve portable and personal-audio equipment that accepts digital audio but drives an analog headphone or line-input amplifier. Its two integrated output channels reduce component count, and the 16-pin SSOP footprint supports compact portable assemblies. The 24-bit conversion format preserves source detail, while the 106 dB typical SNR helps prevent the converter from limiting perceived dynamic range. Battery-powered implementations should also verify the exact analog and digital supply voltages and quiescent-current requirements from the manufacturer datasheet before finalizing the power architecture.

🌐

Communications and Audio Terminals

The PCM1748KE/2K is appropriate for communications terminals and networked audio equipment that uses an I2S digital source but requires left and right analog outputs. The stereo delta-sigma converters support up to 96 kHz sampling, and the SSOP-16 package offers a compact implementation without sacrificing the two-channel output arrangement. Noise-shaping and quantization choices are optimized for audio-band use. Confirm system-clock jitter, mute behavior, and output-filter requirements in the PCM1748 datasheet, and isolate analog return paths from digital clocks to preserve signal quality.

🎧

Digital Music Player

A digital music player can use the PCM1748KE/2K to translate stored or streamed digital audio into an analog stereo signal for an amplifier. Its 24-bit resolution and 96 kHz sampling capability align with common high-resolution playback formats, while the 106 dB typical SNR provides useful margin in quiet passages. The integrated stereo topology simplifies channel matching compared with separate converters. For headphone use, add the appropriate headphone amplifier and verify output drive capability; for line-level use, follow the manufacturer output-filter and reference-circuit recommendations.

🔧

Audio Test and Measurement

The PCM1748KE/2K can form the digital-to-analog output section of an audio test instrument or signal-generation product. Its 24-bit stereo architecture supports generation of two synchronized test channels, and the I2S interface allows connection to an embedded audio source. The 96 kHz maximum sampling rate and 106 dB typical SNR provide useful conversion performance for bench equipment. For calibrated measurements, account for analog filter tolerance, clock accuracy, channel matching, and output reference voltage using the test conditions specified in the manufacturer documentation.

What is PCM1748KE/2K?
The PCM1748KE/2K is a Texas Instruments 24-bit stereo audio DAC that converts I2S digital audio into two analog output channels. It uses enhanced multilevel delta-sigma conversion with fourth-order noise shaping and 8-level amplitude quantization. According to the manufacturer product page and datasheet, the device is packaged in a 16-pin SSOP and supports sampling rates up to 96 kHz, making it suitable for compact stereo audio equipment.
What are the key specifications of PCM1748KE/2K that engineers should know?
The PCM1748KE/2K is a 24-bit, two-channel audio DAC rated for operation up to 96 kHz and housed in a 16-pin SSOP package. According to the Texas Instruments product information, it provides 106 dB typical signal-to-noise ratio and uses enhanced multilevel delta-sigma conversion with fourth-order noise shaping. It also includes stereo analog outputs, I2S digital audio support, dither control, mute functions, and selectable filtering behavior.
Where can I download the PCM1748KE/2K datasheet PDF?
The official PCM1748 datasheet is available from Texas Instruments at https://www.ti.com/lit/gpn/PCM1748. The document contains the converter architecture, pin descriptions, electrical characteristics, clock requirements, filtering options, and recommended application circuits. Use the manufacturer document when establishing the exact PCM1748KE/2K ordering code, package drawing, supply limits, and PCB footprint for a production design.
Where can I find the PCM1748KE/2K pinout?
The PCM1748KE/2K pin assignments are shown in the pin-configuration section of the Texas Instruments PCM1748 datasheet. The component uses a 16-pin SSOP package, but its exact numbered signal list is not reproduced on this page. Use the manufacturer pin-description table and package drawing to assign digital audio, clock, control, supply, ground, and analog-output connections on the PCB.
Is PCM1748KE/2K suitable for audio DAC applications?
The PCM1748KE/2K is specifically suitable for stereo digital-to-analog conversion in audio products. Its 24-bit resolution, operation up to 96 kHz, 106 dB typical SNR, and two analog output channels meet common CD-quality and multimedia audio requirements. According to the Texas Instruments datasheet, its delta-sigma architecture uses fourth-order noise shaping and 8-level quantization to provide useful dynamic performance and clock-jitter tolerance.
What digital audio interface does PCM1748KE/2K use?
The PCM1748KE/2K uses an I2S-compatible digital audio interface to receive stereo samples from a digital audio source. The Texas Instruments product listing identifies the device as an I2S audio DAC with 24-bit resolution and two output channels. Clock timing, master or slave operation, bit alignment, and supported sampling rates must be configured according to the pin table and timing diagrams in the manufacturer datasheet.
How much power supply voltage does PCM1748KE/2K require?
The exact PCM1748KE/2K supply-voltage limits must be taken from the recommended operating conditions and electrical-characteristics tables in the Texas Instruments PCM1748 datasheet. The public product description confirms CMOS construction but does not provide a safe substitute for the exact core and analog supply values. Confirm the device variant, pin names, and voltage ranges before powering the PCB or selecting decoupling capacitors.
Can PCM1748KE/2K be used with I2S digital audio at 96 kHz?
Yes, PCM1748KE/2K is designed to process I2S audio up to 96 kHz. The Texas Instruments product page identifies a 24-bit, 96 kHz enhanced multilevel delta-sigma audio DAC, while the listing confirms the I2S interface. The system clock must satisfy the converter's timing requirements, and the selected system clock, serial-data source, and filtering configuration must remain consistent with the manufacturer timing diagrams.
What can replace PCM1748KE/2K?
PCM1748KE, PCM1748E/2K, PCM1748KE/2KG4, PCM1742KE/2K, and PCM1741E/2K are same-brand PCM-family options documented in the available product listings. They use the 16-pin SSOP format and are identified as functional equivalents, but ordering suffixes can change ordering codes or qualification details. Confirm every pin, clock, supply, control, and analog-output parameter in the applicable datasheet before treating one as a drop-in replacement.
Is PCM1748KE/2K the same as PCM1748KE?
PCM1748KE/2K and PCM1748KE are orderable members of the same Texas Instruments PCM1748 family and are listed with the same 24-bit I2S stereo DAC configuration. The ordering suffix can distinguish commercial programs or packaging conditions, so the suffix is not an automatic no-cost substitution. Check the ordering table, device status, package drawing, and marking requirements for the exact production variant.
PCM1748KE/2K vs PCM1742KE/2K: which is better for a stereo audio design?
The PCM1748KE/2K is the stronger choice when the design requires the documented PCM1748 feature set, while PCM1742KE/2K is a closely related 16-pin SSOP stereo converter from the same manufacturer. Both are identified as enhanced multilevel delta-sigma audio DACs in the available cross-reference information. The decisive factors are output architecture, filtering, clocking, control pins, supply requirements, and whether every signal is pin-compatible; those details must be compared in the two manufacturer datasheets.
When should I choose PCM1748KE/2K over another PCM-family DAC?
Choose PCM1748KE/2K when the board specifically calls for the PCM1748 24-bit stereo I2S DAC in a 16-pin SSOP and its documented filtering, control, and analog-output behavior satisfies the design. Select PCM1742KE/2K or PCM1741E/2K only after verifying that their pin definitions, clock requirements, output implementation, and power rails are equivalent. A shared package alone does not establish safe interchangeability.
Is PCM1748KE/2K suitable for a set-top box or television audio output?
The PCM1748KE/2K is suitable for compact stereo audio-output subsystems in consumer electronics because it combines two 24-bit DAC channels, I2S input, and analog outputs in a 16-pin SSOP. Its 106 dB typical SNR and 96 kHz maximum sampling rate provide useful performance for set-top box and television audio paths. The downstream amplifier, grounding, and output-filter network must still be designed from the manufacturer application guidance.
Where can I buy PCM1748KE/2K online?
Use the Request a Quote form on this page to request PCM1748KE/2K availability, current lead time, and an order quotation. Confirm the exact PCM1748KE/2K ordering code when submitting the request because related PCM1748 suffix and tape-and-reel order codes may appear as separate catalog entries. The current commercial terms should be confirmed at the time of quotation.
What is the price of PCM1748KE/2K?
The current PCM1748KE/2K commercial quotation is available through the Request a Quote form on this page. Submit the exact MPN, required quantity, and shipment destination to obtain current pricing and lead time. Related ordering codes should not be used as substitutes in the request because suffix and packaging conditions may differ from the target PCM1748KE/2K.
What is the lead time and stock status of PCM1748KE/2K?
Current PCM1748KE/2K stock and lead time should be requested through the Request a Quote form on this page. Search-result snippets can change rapidly and may not distinguish every ordering suffix, so they are not a durable availability commitment. Provide the required quantity, target date, and packaging preference with the request to obtain a current supply response.

داده‌های مرجع مهندسی برای PCM1748KE/2K — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose PCM1748KE/2K when the design requires the exact 24-bit, two-channel PCM1748 I2S DAC in a 16-pin SSOP and its documented filtering and control behavior. PCM1748KE, PCM1748E/2K, and PCM1748KE/2KG4 are the closest same-brand ordering options, but suffix differences must be checked against purchasing and qualification requirements rather than treated as automatically identical. PCM1742KE/2K and PCM1741E/2K are same-manufacturer alternatives in the 16-pin SSOP stereo DAC family, yet their output circuitry, clocking, controls, and supply details require direct datasheet comparison. For a design already routed around PCM1748KE/2K, retain the original part whenever possible. Use another family member only when its complete pinout and electrical characteristics match the existing board.

مقایسه با جایگزین‌ها

پارامتر این محصول PCM1748KE PCM1748E/2K PCM1748KE/2KG4 PCM1742KE/2K PCM1741E/2K
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 16-pin SSOP 16-pin SSOP 16-pin SSOP 16-pin SSOP 16-pin SSOP 16-pin SSOP
DAC Resolution 24 bit 24 bit 24 bit 24 bit 24 bit 24 bit
Converter Architecture Enhanced multilevel delta-sigma Enhanced multilevel delta-sigma Enhanced multilevel delta-sigma Enhanced multilevel delta-sigma Enhanced multilevel delta-sigma Enhanced multilevel delta-sigma

تفاوت‌های کلیدی

  • Exact PCM1748 family identity (در مقابلPCM1742KE/2K)
  • Two-channel conversion in one package (در مقابلPCM1741E/2K)
  • Compact 24-bit stereo implementation (در مقابلPCM1748KE)

یادداشت‌های طراحی

Separate the digital input and clock region from the analog output region. Route serial data, system clock, and control traces away from the left and right output pins, and keep the analog ground connection compact according to the manufacturer application circuit. A solid ground plane can reduce return-path distortion, but the analog and digital return currents should not share a high-switching-current path beneath the converter.

Treat the system clock as a critical signal even though the audio data is serial. Use the shortest practical clock route, provide a continuous reference plane, and avoid routing the clock across digital-audio net changes. Verify setup and hold timing at the PCM1748 pins under the actual source-device output delay. The delta-sigma architecture tolerates jitter, but it does not eliminate timing violations or incorrect clock configuration.

Do not infer that every PCM1748 ordering code is interchangeable merely because it uses the same SSOP footprint. Compare the exact pin table, analog output implementation, clock mode, supply voltages, filter options, mute polarity, and control functions in each device datasheet. Also check the orderable status and shipping format before committing a replacement to a production BOM.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The PCM1748 is an audio converter IC and is not identified as an AEC-Q100-qualified automotive device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product page or declaration.

تاریخ تأیید داده‌ها: 2026-11-20 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

PCM1748KE/2K datasheet PCM1748KE/2K pinout PCM1748KE/2K specifications PCM1748KE/2K application circuit PCM1748KE/2K equivalent PCM1748KE/2K replacement PCM1748KE/2K vs PCM1742KE/2K Texas Instruments PCM1748KE/2K 24-bit stereo I2S DAC SSOP PCM1748KE/2K price PCM1748KE/2K stock PCM1748 16-SSOP pinout

قطعات و اصطلاحات مرتبط

Texas Instruments PCM1748KE/2K PCM1748KE PCM1748E/2K PCM1748KE/2KG4 PCM1742KE/2K PCM1741E/2K digital-to-analog converter audio DAC stereo DAC interface IC data converter semiconductor I2S 24-bit resolution 96 kHz sampling rate 106 dB signal-to-noise ratio enhanced multilevel delta-sigma fourth-order noise shaping 8-level amplitude quantization SSOP-16 surface mount RoHS REACH AEC-Q100
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ