PCM1748KE/2K - 24-Bit Stereo Audio DAC | Texas Instruments
N.º da peça: PCM1748KE/2K ✓ AtivoPCM1748KE/2K Visão geral
An audio DAC is a signal-conversion integrated circuit that transforms digital audio samples into voltage signals suitable for headphone amplifiers, line-level amplifiers, speakers, or other analog output stages. Within the product hierarchy, a DAC is an interface IC, a data-converter component, and ultimately a semiconductor. The PCM1748 family combines stereo conversion channels, digital input support, analog output circuitry, clocking functions, and filtering in one CMOS integrated circuit.
Key features include 24-bit resolution, 96 kHz sampling, two analog output channels, 106 dB typical signal-to-noise ratio, and enhanced multilevel delta-sigma conversion. The architecture uses fourth-order noise shaping and 8-level amplitude quantization to improve dynamic performance and clock-jitter tolerance. A selectable high-pass filter, dither control, and zero-bit mute functions support practical audio-system calibration and signal management.
The converter architecture separates digital audio processing from the analog output path, allowing an I2S-compatible source to feed the converter through a compact board layout. Its stereo architecture avoids duplicating a single-channel DAC in a separate package, while the 16-pin SSOP format supports small consumer and industrial assemblies. The PCM1748KE/2K ordering code is associated with the PCM1748 device in the Texas Instruments product family.
Typical uses include set-top boxes, television audio, portable consumer equipment, digital music systems, communications terminals, and audio test equipment. The device can also serve as a clean digital-to-analog output subsystem when the downstream amplifier requires a conventional left/right analog input. Its 106 dB typical SNR provides useful dynamic-range margin in designs where the converter is not the limiting noise contributor.
Layout is especially important for a high-resolution delta-sigma converter. Keep analog and digital return paths separated, route the analog outputs away from high-speed clock and serial-data traces, and use the application information in the manufacturer datasheet to select capacitors, filtering options, grounding, and clock connections. Verify the actual output bandwidth and external-component requirements before substituting any functionally similar converter.
This page consolidates the target ordering code, verified product characteristics, same-family drop-in options, application guidance, and engineering considerations into one practical selection reference. It highlights where the PCM1748KE/2K fits and which ordering or family differences must be checked before using another MPN on the same board.
Alternativas drop-in para PCM1748KE/2K — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PCM1748KE/2K (mesmo formato e footprint) — diferindo em Package, Amplitude Quantization, Digital Audio Interface, Digital Interface, Operating Temperature Range.
PCM1748KE
✅ Drop-InConsulte o preço
Ver ficha técnica →PCM1748E/2K
✅ Drop-InConsulte o preço
Ver ficha técnica →PCM1748KE/2KG4
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PCM1742KE/2K
✅ Drop-InConsulte o preço
Ver ficha técnica →PCM1741E/2K
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PCM1748KE/2K Classificações máximas e características elétricas
| Product Type | Stereo audio digital-to-analog converter |
| Converter Resolution | 24 bit |
| Maximum Sampling Rate | 96 kHz |
| Number of DAC Channels | 2 channels |
| Analog Output Channels | 2 channels |
| Digital Audio Interface | I2S |
| Typical Signal-to-Noise Ratio | 106 dB |
| Converter Architecture | Enhanced multilevel delta-sigma |
| Noise-Shaping Order | Fourth order |
| Amplitude Quantization | 8 levels |
| Process Technology | CMOS |
| Encapsulamento | 16-pin SSOP |
| Tipo de montagem | Surface mount |
| High-Pass Filter | 22 Hz at full-scale RMS |
| Filter Cutoff Frequency | 1 kHz |
Guia de Configuração de Pinos do PCM1748KE/2K 16-pin ssop
Configuração de pinos para PCM1748KE/2K (pacote 16-pin ssop). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para PCM1748KE/2K.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
PCM1748KE/2K é adequado para 6 aplicaçãos: Set-Top Box Audio Output, Television and Monitor Audio, Portable Audio Equipment, Communications and Audio Terminals, Digital Music Player, Audio Test and Measurement.
Set-Top Box Audio Output
The PCM1748KE/2K fits a set-top box that receives 24-bit I2S audio and needs two analog line outputs. Its stereo delta-sigma architecture supports sampling up to 96 kHz, while the two output channels avoid using separate single-channel converters. The 16-pin SSOP package conserves board area, and the 106 dB typical SNR provides useful headroom before amplification. Place the converter close to the audio output routing, keep clock and digital traces away from analog outputs, and use the manufacturer filtering and grounding guidance to preserve low-noise operation.
Recomendado
Television and Monitor Audio
For television, monitor, and display audio designs, the PCM1748KE/2K provides a compact stereo conversion stage from digital audio to left and right analog signals. Its 24-bit resolution, 96 kHz maximum sampling rate, and 106 dB typical SNR suit multimedia content delivered through an I2S source. The 16-pin SSOP package supports space-constrained boards, while programmable filtering, dither, and mute behavior help engineers control signal integration. Clock routing and analog grounding remain critical to prevent switching artifacts from entering the output path.
Recomendado
Portable Audio Equipment
The PCM1748KE/2K can serve portable and personal-audio equipment that accepts digital audio but drives an analog headphone or line-input amplifier. Its two integrated output channels reduce component count, and the 16-pin SSOP footprint supports compact portable assemblies. The 24-bit conversion format preserves source detail, while the 106 dB typical SNR helps prevent the converter from limiting perceived dynamic range. Battery-powered implementations should also verify the exact analog and digital supply voltages and quiescent-current requirements from the manufacturer datasheet before finalizing the power architecture.
Recomendado
Communications and Audio Terminals
The PCM1748KE/2K is appropriate for communications terminals and networked audio equipment that uses an I2S digital source but requires left and right analog outputs. The stereo delta-sigma converters support up to 96 kHz sampling, and the SSOP-16 package offers a compact implementation without sacrificing the two-channel output arrangement. Noise-shaping and quantization choices are optimized for audio-band use. Confirm system-clock jitter, mute behavior, and output-filter requirements in the PCM1748 datasheet, and isolate analog return paths from digital clocks to preserve signal quality.
Recomendado
Digital Music Player
A digital music player can use the PCM1748KE/2K to translate stored or streamed digital audio into an analog stereo signal for an amplifier. Its 24-bit resolution and 96 kHz sampling capability align with common high-resolution playback formats, while the 106 dB typical SNR provides useful margin in quiet passages. The integrated stereo topology simplifies channel matching compared with separate converters. For headphone use, add the appropriate headphone amplifier and verify output drive capability; for line-level use, follow the manufacturer output-filter and reference-circuit recommendations.
Recomendado
Audio Test and Measurement
The PCM1748KE/2K can form the digital-to-analog output section of an audio test instrument or signal-generation product. Its 24-bit stereo architecture supports generation of two synchronized test channels, and the I2S interface allows connection to an embedded audio source. The 96 kHz maximum sampling rate and 106 dB typical SNR provide useful conversion performance for bench equipment. For calibrated measurements, account for analog filter tolerance, clock accuracy, channel matching, and output reference voltage using the test conditions specified in the manufacturer documentation.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PCM1748KE/2K — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PCM1748KE | PCM1748E/2K | PCM1748KE/2KG4 | PCM1742KE/2K | PCM1741E/2K |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-pin SSOP | 16-pin SSOP | 16-pin SSOP | 16-pin SSOP | 16-pin SSOP | 16-pin SSOP |
| DAC Resolution | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit |
| Converter Architecture | Enhanced multilevel delta-sigma | Enhanced multilevel delta-sigma | Enhanced multilevel delta-sigma | Enhanced multilevel delta-sigma | Enhanced multilevel delta-sigma | Enhanced multilevel delta-sigma |
Principais diferenciais
- Exact PCM1748 family identity (vs PCM1742KE/2K)
- Two-channel conversion in one package (vs PCM1741E/2K)
- Compact 24-bit stereo implementation (vs PCM1748KE)
Notas de projeto
Separate the digital input and clock region from the analog output region. Route serial data, system clock, and control traces away from the left and right output pins, and keep the analog ground connection compact according to the manufacturer application circuit. A solid ground plane can reduce return-path distortion, but the analog and digital return currents should not share a high-switching-current path beneath the converter.
Treat the system clock as a critical signal even though the audio data is serial. Use the shortest practical clock route, provide a continuous reference plane, and avoid routing the clock across digital-audio net changes. Verify setup and hold timing at the PCM1748 pins under the actual source-device output delay. The delta-sigma architecture tolerates jitter, but it does not eliminate timing violations or incorrect clock configuration.
Do not infer that every PCM1748 ordering code is interchangeable merely because it uses the same SSOP footprint. Compare the exact pin table, analog output implementation, clock mode, supply voltages, filter options, mute polarity, and control functions in each device datasheet. Also check the orderable status and shipping format before committing a replacement to a production BOM.
Informações de conformidade
The PCM1748 is an audio converter IC and is not identified as an AEC-Q100-qualified automotive device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product page or declaration.