PEX8606-BA50BI - 6-Lane Gen 2 PCIe Switch | Broadcom
MPN: PEX8606-BA50BI ✓ فعالPEX8606-BA50BI نمای کلی
A PCI Express switch is an interface IC within the broader semiconductor and computer-interface hierarchy. It routes PCIe traffic among a host or root complex, endpoint devices, and other system resources. By expanding one upstream link into multiple downstream ports, the PEX 8606 can simplify board topology in embedded control systems, packet-processing equipment, storage systems, and test platforms while maintaining protocol-level link management.
The documented configuration provides six PCIe lanes, six switch ports, two channels, and full PCI Express Base Specification Revision 2.0 compliance. The switch is backward compatible with PCI Express Base Specification Revision 1.1 and Revision 1.0a. Automatic lane-width negotiation allows devices to operate at a speed and width supported by both ends of the link, while lane and polarity reversal add practical tolerance for connector orientation and routing differences.
The PEX 8606 architecture is intended for embedded control-plane designs, including packet-processing modules. Its principal engineering benefit is the elimination of multiple host-to-endpoint paths when several PCIe devices must communicate through one system controller. Supporting both current Gen 2 operation and earlier PCIe generations makes it useful when the system must accommodate older endpoint cards or transition from legacy expansion equipment to newer PCIe implementations.
Typical applications include industrial packet routers, embedded control modules, network-interface assemblies, storage controllers, instrumentation platforms, and compact computing systems requiring multiple PCIe connections. The 196-pin PBGA supports high-speed, dense board layouts, but its 15 x 15 mm footprint requires careful ball assignment, multilayer routing, reference-plane continuity, and power-distribution design to preserve signal integrity across all six lanes.
When integrating the device, plan the board with the Broadcom reference design and pin-assignment documentation, maintain continuous return paths beneath high-speed links, and validate power sequencing across the host and downstream ports. The broad compatibility features reduce link-training risk, but they do not replace proper reference-plane design, connector configuration, or system-level PCIe compliance testing.
This product page consolidates the Broadcom PEX 8606 architecture, compatibility features, application guidance, package information, and engineering-oriented replacement analysis to help designers evaluate the switch before beginning a dense PCB implementation.
جایگزینهای drop-in برای PEX8606-BA50BI — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
PEX8606-BA50BI-G
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PEX8606-BA50BI حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | PCI Express switch IC |
| PCI Express Generation | Gen 2 |
| PCI Express Lane Count | 6 lanes |
| Port Count | 6 ports |
| Channel Count | 2 channels |
| PCI Express Base Specification Compliance | Revision 2.0 |
| Backward Compatibility | Revision 1.1 and Revision 1.0a |
| Link Negotiation | Automatic negotiation |
| Lane Reversal Support | Supported |
| Polarity Reversal Support | Supported |
| Package Type | 196-pin PBGA |
| Package Body Size | 15 x 15 mm |
| نوع نصب | Surface mount |
| Microsoft Vista Compliance | Designed for compliance |
راهنمای پیکربندی پین PEX8606-BA50BI 15 x 15 mm
پیکربندی پین برای PEX8606-BA50BI (پکیج 15 x 15 mm). این قطعه آنالوگ دارای پینهای ورودی، خروجی و تغذیه است. برای پیکربندیهای پین offset null، جبرانسازی و فعالسازی به دیتاشیت سازنده مراجعه کنید. ایدهآل برای مدارهای شرطیسازی سیگنال و تقویتکننده.
داده پینآوت تفصیلی موجود نیست برای PEX8606-BA50BI.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
PEX8606-BA50BI مناسب است برای 6 کاربردs: Embedded Control-Plane Module, Packet-Processing Equipment, Industrial Network-Interface Module, Storage Controller Assembly, Test and Measurement Platform, Legacy-to-Gen 2 Migration.
Embedded Control-Plane Module
The Broadcom PEX8606-BA50BI fits an embedded control plane that must connect several PCIe endpoints to one host interface. Its six-lane, six-port Gen 2 configuration consolidates endpoint links without requiring a separate switch for every device, while Revision 1.1 and Revision 1.0a backward compatibility supports mixed-generation installed cards. Automatic negotiation allows each link to settle at a mutually supported width and rate. Use the device according to the Broadcom reference design, preserve continuous reference planes beneath all differential pairs, and validate power sequencing across the host and downstream ports.
پیشنهادی
Packet-Processing Equipment
The PEX8606-BA50BI is suited to packet-processing modules that need multiple PCIe links behind a common switching fabric. Broadcom identifies embedded control-plane packet processing as a PEX 8606 application, and the six available ports can connect endpoint, management, or acceleration devices without a separate host-to-device path for each function. Gen 2 operation establishes the baseline link capability, while automatic negotiation accommodates devices with different supported widths. The 196-pin PBGA demands meticulous ball escape planning, matched pair routing, and multiple supply planes to limit insertion loss and skew.
پیشنهادی
Industrial Network-Interface Module
An industrial network-interface module can use the Broadcom PEX8606-BA50BI to connect communication, processing, and management endpoints through six PCIe switch ports. The device's support for lane reversal and polarity reversal improves tolerance in systems where connector orientation or board-routing constraints complicate direct point-to-point routing. Automatic negotiation supports links involving different generations of PCIe equipment. Design the 15 x 15 mm PBGA footprint with an uninterrupted return path, controlled impedance, and decoupling located directly at the relevant supply balls.
پیشنهادی
Storage Controller Assembly
The PEX8606-BA50BI can organize multiple PCIe storage-related functions within a compact controller assembly. Its six ports allow management, caching, networking, and storage endpoint devices to communicate through a common PCIe switch layer instead of consuming separate host-controller resources. The switch supports PCI Express Revision 2.0 while remaining compatible with Revision 1.1 and Revision 1.0a equipment. Because storage systems can place several high-speed links close together, maintain uniform pair geometry, avoid split reference planes, and verify the complete power tree against the manufacturer's electrical tables.
پیشنهادی
Test and Measurement Platform
The Broadcom PEX8606-BA50BI provides a practical way to organize multiple PCIe instruments, controllers, or acquisition devices within a test platform. Six ports permit a structured topology rather than ad hoc point-to-point connections, and automatic negotiation helps the system operate with endpoint devices that support different PCIe link widths. Lane reversal and polarity reversal can shorten routing adjustments in crowded instrument chassis. The high-pin-count PBGA still requires careful escape routing from the package balls, and system validation should cover link training, fault recovery, and operation across supported legacy PCIe generations.
پیشنهادی
Legacy-to-Gen 2 Migration
The PEX8606-BA50BI is appropriate for equipment that must combine Gen 2 PCIe devices with endpoints based on Revision 1.1 or Revision 1.0a. Its six-lane fabric and automatic negotiation allow the system to establish links using the capabilities supported by both ends, rather than requiring a separate migration path for every device. The six-port topology also allows legacy and current cards to coexist on one switched interface. Confirm that the host controller, endpoint cards, connectors, and switch configuration support the required generation mix, and reproduce the manufacturer's reference layout before scaling to production.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای PEX8606-BA50BI — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | PEX8606-BA50BI-G |
|---|---|---|
| Package | 196-pin PBGA (15 x 15 mm) | 196-pin PBGA (15 x 15 mm) |
| Brand | Broadcom | Broadcom |
| PCI Express Generation | Gen 2 | Gen 2 |
| Lane Count | 6 lanes | 6 lanes |
| Port Count | 6 ports | 6 ports |
| Channel Count | 2 channels | 2 channels |
| PCI Express Specification | Base Specification Revision 2.0 | Base Specification Revision 2.0 |
| Backward Compatibility | Revision 1.1 and Revision 1.0a | Revision 1.1 and Revision 1.0a |
| Link Features | Automatic negotiation, lane reversal, and polarity reversal | Automatic negotiation, lane reversal, and polarity reversal |
| Target Application | Embedded control plane and packet processing | Embedded control plane and packet processing |
تفاوتهای کلیدی
- Six-port Gen 2 switching topology (در مقابلPEX8606-BA50BI-G)
- Mixed-generation PCIe compatibility (در مقابلPEX8606-BA50BI-G)
- Board-routing flexibility (در مقابلPEX8606-BA50BI-G)
یادداشتهای طراحی
Treat the 196-ball PBGA as a high-speed layout problem rather than a conventional breakout package. Follow the Broadcom reference layout for ball assignments, escape geometry, decoupling, and layer transitions. Keep each PCIe differential pair over a continuous reference plane, avoid plane splits beneath the links, and match pair length through the escape and routing stages. Validate the complete stackup with impedance-control targets before fabrication.
Assign the switch supplies, auxiliary rails, clocking, and ground connections exactly as specified in the manufacturer power tables. Place decoupling capacitance at the corresponding PBGA balls and use multiple vias between package and reference planes to limit inductance. Establish the required sequencing behavior between the host and downstream ports. Because exact voltage and current limits are not stated in the component listing, use the manufacturer documentation for the power tree and do not substitute inferred rail values.
Account for insertion loss, skew, and connector transitions in the complete PCIe path. Lane reversal and polarity reversal improve routing flexibility but do not correct excessive loss or impedance discontinuities. Use the Broadcom design checklist for trace geometry and test access, and validate operation with the intended mix of Gen 2 and legacy endpoints. A protocol-compliant switch can still fail link training when the channel is electrically marginal.
Assess heat generated by the switch and nearby components using the exact supply, current, and ambient conditions required by the equipment. The available product information does not identify the thermal resistance or maximum junction temperature, so obtain those limits from the Broadcom documentation. Use the exposed package features only as directed by the manufacturer and account for copper sharing, airflow, adjacent component heating, and the thermal profile of the finished enclosure.
اطلاعات انطباق
The component records do not state environmental-material declarations for the exact target designation. AEC-Q100 is not applicable because the product is a general-purpose PCIe switch and no automotive qualification is identified.