Broadcom

PEX8606-BA50BI - 6-Lane Gen 2 PCIe Switch | Broadcom

부품 번호: PEX8606-BA50BI ✓ 활성
196-pin PBGA Package
MOQ: 1 |

PEX8606-BA50BI 개요

Broadcom PEX8606-BA50BI is a PCI Express switch IC with six lanes, six ports, and PCIe Gen 2 operation, housed in a 196-pin PBGA measuring 15 x 15 mm. It is designed for systems that require multiple PCIe endpoints to share a host interface through a dedicated PCIe switch. Each port supports automatic negotiation, lane reversal, and polarity reversal, improving compatibility with installed cards and cable-connected equipment.

A PCI Express switch is an interface IC within the broader semiconductor and computer-interface hierarchy. It routes PCIe traffic among a host or root complex, endpoint devices, and other system resources. By expanding one upstream link into multiple downstream ports, the PEX 8606 can simplify board topology in embedded control systems, packet-processing equipment, storage systems, and test platforms while maintaining protocol-level link management.

The documented configuration provides six PCIe lanes, six switch ports, two channels, and full PCI Express Base Specification Revision 2.0 compliance. The switch is backward compatible with PCI Express Base Specification Revision 1.1 and Revision 1.0a. Automatic lane-width negotiation allows devices to operate at a speed and width supported by both ends of the link, while lane and polarity reversal add practical tolerance for connector orientation and routing differences.

The PEX 8606 architecture is intended for embedded control-plane designs, including packet-processing modules. Its principal engineering benefit is the elimination of multiple host-to-endpoint paths when several PCIe devices must communicate through one system controller. Supporting both current Gen 2 operation and earlier PCIe generations makes it useful when the system must accommodate older endpoint cards or transition from legacy expansion equipment to newer PCIe implementations.

Typical applications include industrial packet routers, embedded control modules, network-interface assemblies, storage controllers, instrumentation platforms, and compact computing systems requiring multiple PCIe connections. The 196-pin PBGA supports high-speed, dense board layouts, but its 15 x 15 mm footprint requires careful ball assignment, multilayer routing, reference-plane continuity, and power-distribution design to preserve signal integrity across all six lanes.

When integrating the device, plan the board with the Broadcom reference design and pin-assignment documentation, maintain continuous return paths beneath high-speed links, and validate power sequencing across the host and downstream ports. The broad compatibility features reduce link-training risk, but they do not replace proper reference-plane design, connector configuration, or system-level PCIe compliance testing.

This product page consolidates the Broadcom PEX 8606 architecture, compatibility features, application guidance, package information, and engineering-oriented replacement analysis to help designers evaluate the switch before beginning a dense PCB implementation.

드롭인 대체품: PEX8606-BA50BI — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

PEX8606-BA50BI-G

✅ 드롭인
📦 196-pin PBGA (15 x 15 mm)
G-suffix ordering designation; documented 6-lane, 6-port, Gen 2, 2-channel configuration and 196-pin PBGA match the target

📋 참조 대체품 (카탈로그에 없음)

PEX8606-BA50BI 최대 정격 & 전기적 특성

Device Type PCI Express switch IC
PCI Express Generation Gen 2
PCI Express Lane Count 6 lanes
Port Count 6 ports
Channel Count 2 channels
PCI Express Base Specification Compliance Revision 2.0
Backward Compatibility Revision 1.1 and Revision 1.0a
Link Negotiation Automatic negotiation
Lane Reversal Support Supported
Polarity Reversal Support Supported
Package Type 196-pin PBGA
Package Body Size 15 x 15 mm
실장 유형 Surface mount
Microsoft Vista Compliance Designed for compliance

PEX8606-BA50BI 15 x 15 mm 핀 구성 가이드

PEX8606-BA50BI(15 x 15 mm 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

PEX8606-BA50BI의 15 x 15 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: PEX8606-BA50BI.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

PEX8606-BA50BI 적합 용도: 6 애플리케이션s: Embedded Control-Plane Module, Packet-Processing Equipment, Industrial Network-Interface Module, Storage Controller Assembly, Test and Measurement Platform, Legacy-to-Gen 2 Migration.

🖥️

Embedded Control-Plane Module

The Broadcom PEX8606-BA50BI fits an embedded control plane that must connect several PCIe endpoints to one host interface. Its six-lane, six-port Gen 2 configuration consolidates endpoint links without requiring a separate switch for every device, while Revision 1.1 and Revision 1.0a backward compatibility supports mixed-generation installed cards. Automatic negotiation allows each link to settle at a mutually supported width and rate. Use the device according to the Broadcom reference design, preserve continuous reference planes beneath all differential pairs, and validate power sequencing across the host and downstream ports.

🌐

Packet-Processing Equipment

The PEX8606-BA50BI is suited to packet-processing modules that need multiple PCIe links behind a common switching fabric. Broadcom identifies embedded control-plane packet processing as a PEX 8606 application, and the six available ports can connect endpoint, management, or acceleration devices without a separate host-to-device path for each function. Gen 2 operation establishes the baseline link capability, while automatic negotiation accommodates devices with different supported widths. The 196-pin PBGA demands meticulous ball escape planning, matched pair routing, and multiple supply planes to limit insertion loss and skew.

🏭

Industrial Network-Interface Module

An industrial network-interface module can use the Broadcom PEX8606-BA50BI to connect communication, processing, and management endpoints through six PCIe switch ports. The device's support for lane reversal and polarity reversal improves tolerance in systems where connector orientation or board-routing constraints complicate direct point-to-point routing. Automatic negotiation supports links involving different generations of PCIe equipment. Design the 15 x 15 mm PBGA footprint with an uninterrupted return path, controlled impedance, and decoupling located directly at the relevant supply balls.

💾

Storage Controller Assembly

The PEX8606-BA50BI can organize multiple PCIe storage-related functions within a compact controller assembly. Its six ports allow management, caching, networking, and storage endpoint devices to communicate through a common PCIe switch layer instead of consuming separate host-controller resources. The switch supports PCI Express Revision 2.0 while remaining compatible with Revision 1.1 and Revision 1.0a equipment. Because storage systems can place several high-speed links close together, maintain uniform pair geometry, avoid split reference planes, and verify the complete power tree against the manufacturer's electrical tables.

🔧

Test and Measurement Platform

The Broadcom PEX8606-BA50BI provides a practical way to organize multiple PCIe instruments, controllers, or acquisition devices within a test platform. Six ports permit a structured topology rather than ad hoc point-to-point connections, and automatic negotiation helps the system operate with endpoint devices that support different PCIe link widths. Lane reversal and polarity reversal can shorten routing adjustments in crowded instrument chassis. The high-pin-count PBGA still requires careful escape routing from the package balls, and system validation should cover link training, fault recovery, and operation across supported legacy PCIe generations.

🔄

Legacy-to-Gen 2 Migration

The PEX8606-BA50BI is appropriate for equipment that must combine Gen 2 PCIe devices with endpoints based on Revision 1.1 or Revision 1.0a. Its six-lane fabric and automatic negotiation allow the system to establish links using the capabilities supported by both ends, rather than requiring a separate migration path for every device. The six-port topology also allows legacy and current cards to coexist on one switched interface. Confirm that the host controller, endpoint cards, connectors, and switch configuration support the required generation mix, and reproduce the manufacturer's reference layout before scaling to production.

추천 제품 요약

PEX8606-BA50BI Broadcom 사용처: Embedded Control-Plane Module, Packet-Processing Equipment, Industrial Network-Interface Module, Storage Controller Assembly, Test and Measurement Platform, Legacy-to-Gen 2 Migration PEX8606-BA50BI-G Closely related Broadcom PCIe switch ordering designation 사용처: Embedded Control-Plane Module, Packet-Processing Equipment, Industrial Network-Interface Module, Storage Controller Assembly, Test and Measurement Platform, Legacy-to-Gen 2 Migration
What is the Broadcom PEX8606-BA50BI?
The Broadcom PEX8606-BA50BI is a PCI Express Gen 2 switch IC with six lanes, six ports, two channels, and a 196-pin PBGA package. According to the Broadcom PEX 8606 product documentation, it complies with PCI Express Base Specification Revision 2.0 and supports Revision 1.1 and Revision 1.0a backward compatibility. It is intended for systems that need one upstream PCIe connection to fan out to several downstream endpoints.
How many PCIe lanes and ports does the PEX8606-BA50BI support?
The PEX8606-BA50BI supports six PCIe lanes and six switch ports in a two-channel arrangement. Broadcom identifies the device as a six-lane, six-port Gen 2 PCI Express switch. Automatic negotiation lets each link settle at a width and transfer rate supported by both connected devices, which is particularly useful in mixed-generation systems incorporating older PCIe endpoint cards.
Where can I download the PEX8606-BA50BI datasheet PDF?
The official Broadcom PEX 8606 documentation is available through the manufacturer document portal at https://docs.broadcom.com/doc/12351822. The product overview identifies PCI Express Revision 2.0 compliance, backward compatibility, lane reversal, polarity reversal, and the intended embedded control-plane applications. Use the manufacturer PDF for authoritative pin assignments, electrical limits, reference schematics, and layout guidance.
Where is the PEX8606-BA50BI pinout and package drawing?
The PEX8606-BA50BI uses a 196-pin, 15 x 15 mm PBGA package, but the public product listing does not reproduce its complete ball map. Use the Broadcom PEX 8606 datasheet and reference-design material for the numbered ball assignment and PCB footprint. Confirm every power, ground, reference-clock, auxiliary, and differential-pair connection directly against the manufacturer document before releasing a layout.
What is the best drop-in replacement for the PEX8606-BA50BI?
No independently verified, pin-compatible replacement for the PEX8606-BA50BI appears in the available component records. The closely identified PEX8606-BA50BI-G shares the PEX 8606 six-lane, six-port, Gen 2, 196-pin PBGA configuration, but its G suffix must be checked against ordering and environmental requirements before it is treated as an exact substitution. PCB changes should not be assumed.
Can the PEX8606-BA50BI-G replace the PEX8606-BA50BI?
The PEX8606-BA50BI-G is a closely related Broadcom ordering designation for the same documented six-lane, six-port Gen 2 PCIe switch configuration in a 196-pin PBGA. It is the only verified alternative designation identified. Before replacing the PEX8606-BA50BI, confirm the complete Broadcom ordering code, environmental suffix, firmware expectations, and exact ball map in the manufacturer documentation.
PEX8606-BA50BI vs PEX8606-BA50BI-G: which is the better choice?
Both designations are associated with the Broadcom PEX 8606 six-lane, six-port Gen 2 PCIe switch in a 196-pin PBGA. The available listing records do not establish a meaningful electrical difference between PEX8606-BA50BI and PEX8606-BA50BI-G. Select the suffix that matches the approved Broadcom ordering table and environmental requirements, and verify both package documentation and design files before production use.
When should I choose the PEX8606-BA50BI over another PCIe switch?
Choose the PEX8606-BA50BI when a design needs six PCIe Gen 2 lanes, six downstream-facing switch ports, and a 196-pin PBGA implementation with support for lane reversal and polarity reversal. Its Revision 1.1 and Revision 1.0a backward compatibility is useful for mixed-generation equipment. Choose another switch only when its lane topology, port count, package, power design, and protocol features are validated against the system requirements.
Is the PEX8606-BA50BI suitable for embedded packet-processing systems?
The PEX8606-BA50BI is suitable for embedded control-plane and packet-processing modules that need multiple PCIe endpoint connections. Broadcom specifically identifies packet-processing modules as an application for the PEX 8606. Six lanes and six ports can consolidate several endpoint links behind one switch, while lane and polarity reversal improve board-level integration flexibility.
Where can I buy the PEX8606-BA50BI online?
Use the Request a Quote form on this page to request Broadcom PEX8606-BA50BI sourcing, current availability, and lead time for the exact ordering designation. The form is the appropriate channel for obtaining a firm quotation and confirming package, suffix, quantity, and production requirements without relying on a static listing price.
What is the price of the PEX8606-BA50BI?
Current pricing for the PEX8606-BA50BI depends on quantity, suffix, packaging, and component condition, so it should be confirmed through the Request a Quote form on this page. The available listing information does not present qualifying quantity-break prices for the exact target designation. Include your required quantity and delivery location with the request to obtain a current quotation.
What is the lead time for the PEX8606-BA50BI?
The current lead time for the PEX8606-BA50BI should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, procurement status, suffix, packaging, and manufacturing conditions. Providing the complete Broadcom ordering designation, annual and prototype quantities, and target delivery date enables the supplier to confirm an accurate schedule.
Is the PEX8606-BA50BI in stock?
Stock availability for the exact PEX8606-BA50BI designation should be confirmed with the Request a Quote form on this page. Marketplace records for related Broadcom order codes do not establish guaranteed stock for the target suffix. Include the required quantity and package details in the request so that availability can be matched to the exact BOM line.
What are the key specifications engineers should know about the PEX8606-BA50BI?
The PEX8606-BA50BI combines six PCIe lanes, six ports, two channels, and Gen 2 operation in a 196-pin, 15 x 15 mm PBGA. Broadcom documents PCI Express Revision 2.0 compliance, backward compatibility with Revisions 1.1 and 1.0a, automatic negotiation, lane reversal, and polarity reversal. The device is positioned for embedded control-plane systems and packet-processing modules.
What are the power and thermal considerations for the PEX8606-BA50BI?
The PEX8606-BA50BI requires careful multi-rail power design because its 196-pin PBGA provides the ball density needed for six PCIe lanes and six ports. The available component information does not state the exact supply voltages, current limits, or junction-temperature limits. Use the Broadcom datasheet for those ratings, then evaluate power loss, copper area, airflow, and adjacent heat sources during thermal analysis.
Is the PEX8606-BA50BI compliant with RoHS and REACH?
The RoHS and REACH status of the exact PEX8606-BA50BI ordering designation is not stated in the available product records. Do not infer compliance solely from the Broadcom name or the related G-suffix listing. Request the current material-declaration and environmental-compliance documents for the exact MPN, and check whether any qualification or customer-specific requirement such as AEC-Q100 also applies to the design.

엔지니어링 참조 데이터: PEX8606-BA50BI — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the PEX8606-BA50BI when an embedded or packet-processing system requires a six-lane, six-port PCIe Gen 2 switch in a 196-pin PBGA and must accommodate Revision 1.1 or 1.0a endpoints. The Broadcom PEX8606-BA50BI-G is the closest identified ordering designation and should be considered when procurement recognizes that suffix, but verify the exact ordering code, environmental status, and ball map before substitution. Neither designation is shown here as a cross-brand drop-in alternative because no competitor switch with the same six-lane, six-port, 196-pin PBGA configuration was verified. A different PCIe switch may offer another package or broader lane count, but it requires a separate design review rather than an assumed footprint substitution.

대체품과의 비교

파라미터 이 제품 PEX8606-BA50BI-G
Package 196-pin PBGA (15 x 15 mm) 196-pin PBGA (15 x 15 mm)
Brand Broadcom Broadcom
PCI Express Generation Gen 2 Gen 2
Lane Count 6 lanes 6 lanes
Port Count 6 ports 6 ports
Channel Count 2 channels 2 channels
PCI Express Specification Base Specification Revision 2.0 Base Specification Revision 2.0
Backward Compatibility Revision 1.1 and Revision 1.0a Revision 1.1 and Revision 1.0a
Link Features Automatic negotiation, lane reversal, and polarity reversal Automatic negotiation, lane reversal, and polarity reversal
Target Application Embedded control plane and packet processing Embedded control plane and packet processing

주요 차별점

  • Six-port Gen 2 switching topology (vs PEX8606-BA50BI-G)
  • Mixed-generation PCIe compatibility (vs PEX8606-BA50BI-G)
  • Board-routing flexibility (vs PEX8606-BA50BI-G)

설계 노트

Treat the 196-ball PBGA as a high-speed layout problem rather than a conventional breakout package. Follow the Broadcom reference layout for ball assignments, escape geometry, decoupling, and layer transitions. Keep each PCIe differential pair over a continuous reference plane, avoid plane splits beneath the links, and match pair length through the escape and routing stages. Validate the complete stackup with impedance-control targets before fabrication.

Assign the switch supplies, auxiliary rails, clocking, and ground connections exactly as specified in the manufacturer power tables. Place decoupling capacitance at the corresponding PBGA balls and use multiple vias between package and reference planes to limit inductance. Establish the required sequencing behavior between the host and downstream ports. Because exact voltage and current limits are not stated in the component listing, use the manufacturer documentation for the power tree and do not substitute inferred rail values.

Account for insertion loss, skew, and connector transitions in the complete PCIe path. Lane reversal and polarity reversal improve routing flexibility but do not correct excessive loss or impedance discontinuities. Use the Broadcom design checklist for trace geometry and test access, and validate operation with the intended mix of Gen 2 and legacy endpoints. A protocol-compliant switch can still fail link training when the channel is electrically marginal.

Assess heat generated by the switch and nearby components using the exact supply, current, and ambient conditions required by the equipment. The available product information does not identify the thermal resistance or maximum junction temperature, so obtain those limits from the Broadcom documentation. Use the exposed package features only as directed by the manufacturer and account for copper sharing, airflow, adjacent component heating, and the thermal profile of the finished enclosure.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The component records do not state environmental-material declarations for the exact target designation. AEC-Q100 is not applicable because the product is a general-purpose PCIe switch and no automotive qualification is identified.

데이터 검증일: 2026-11-11 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

PEX8606-BA50BI datasheet PEX8606-BA50BI pinout PEX8606-BA50BI datasheet pdf PEX8606-BA50BI equivalent PEX8606-BA50BI replacement PEX8606-BA50BI cross reference Broadcom PEX8606-BA50BI PEX8606-BA50BI 6 lane 6 port PEX8606-BA50BI 196 PBGA PEX8606-BA50BI packet processing PEX8606-BA50BI vs PEX8606-BA50BI-G PEX8606-BA50BI price PEX8606-BA50BI stock

관련 부품 & 용어

Broadcom PEX8606-BA50BI PEX8606-BA50BI-G PEX 8606 PCI Express switch PCIe interface IC interface IC semiconductor Gen 2 PCI Express PCI Express Base Specification Revision 2.0 PCI Express Base Specification Revision 1.1 PCI Express Base Specification Revision 1.0a automatic link negotiation lane reversal polarity reversal 196-pin PBGA PBGA package surface mount embedded control plane packet processing PCIe routing differential pair reference plane
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기