PI7C9X111SLBFDEX - PCIe to PCI Reversible Bridge | Diodes Inc
MPN: PI7C9X111SLBFDEX ✓ فعالPI7C9X111SLBFDEX نمای کلی
A PCIe-to-PCI bridge is a protocol-translating device that lets modern systems lacking a native PCI host controller still address legacy PCI cards, or conversely lets a legacy PCI host expose an endpoint to a PCIe root complex. Bridges like the PI7C9X111SLBFDEX sit in the interconnect hierarchy between the system root complex and the I/O subsystem, allowing product designers to extend the lifecycle of mature 32-bit/66 MHz PCI peripherals (data-acquisition cards, frame grabbers, industrial I/O) on newer PCIe-only CPUs, or to add PCIe endpoint capability to legacy PCI platforms.
Key features include 32-bit/66 MHz PCI bus support, a single-lane (x1) PCIe interface, reversible bridge direction, very low power consumption, a small LQFP-128 footprint, and clock power management. The reversible architecture is enabled by pin strapping on the TM1 ball: when TM1 is strapped low, the part uses REQ_L[3:2] and REVRSB to invoke the Clock Power Management feature at PERST# de-assertion. The PI7C9X111SLBFDEX is part of Diodes' SlimLine PCIe bridge family, optimized for compact embedded designs.
Typical applications include legacy PCI card migration onto PCIe-only host boards, industrial single-board computers, test and measurement backplanes, embedded vision and frame-grabber adapters, and reverse-bridge use cases where a legacy PCI host must communicate with a PCIe endpoint. The -EX suffix on the part number denotes the Tape & Reel packaging option.
When designing with this device, pay close attention to PCIe reference-clock routing and AC-coupling capacitor placement, ensure PERST# timing complies with the PCIe CEM specification, and follow the datasheet's hot-plug and clock-power-management pin-strap recommendations. The part operates from a single 3.3 V supply.
This page synthesizes distributor pricing, drop-in alternative analysis, and practical design notes for the PI7C9X111SLBFDEX that are not consolidated in the manufacturer datasheet, helping engineers evaluate sourcing and second-source options.
جایگزین‌های drop-in برای PI7C9X111SLBFDEX — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای PI7C9X111SLBFDEX (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در PCI Bus Speed, Product Type, Package, RoHS Status, Function.
PI7C9X111SLBFDE
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PI7C9X111SLBFDEX-2017
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PI7C9X111SLBFDEX حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | PCI Express to PCI Reversible Bridge |
| Bridge Direction | Forward (PCIe-to-PCI) and Reverse (PCI-to-PCIe) |
| PCIe Interface | x1 (single lane) |
| PCI Bus Width | 32-bit |
| PCI Bus Speed | Up to 66 MHz |
| بسته‌بندی | 128-LQFP (14x14 mm) |
| نوع نصب | Surface Mount |
| Pin Strapping | TM1 low enables Clock Power Management via REQ_L[3:2] and REVRSB at PERST# |
| Packaging Option | Tape & Reel (EX suffix) |
| وضعیت RoHS | Compliant (per Diodes product page) |
| Bus Architecture | SlimLine PCIe bridge family |
| Pericom Part Family | PI7C9X111SL (Diodes / Pericom legacy line) |
| Datasheet Document | PI7C9X111SL datasheet from diodes.com |
پیکربندی پین PI7C9X111SLBFDEX
| پین 1 | REFCLK+ — PCI Express reference clock positive |
| پین 2 | REFCLK- — PCI Express reference clock negative |
| پین 3 | PERST# — PCI Express fundamental reset (active low) |
| پین 4 | TM1 — Test mode 1; strap low to enable Clock Power Management via REQ_L[3:2]/REVRSB |
| پین 5 | GND — Ground |
| پین 6 | VDD — 3.3 V supply rail |
| پین 7 | PETp0 — PCI Express transmit differential pair positive (lane 0) |
| پین 8 | PETn0 — PCI Express transmit differential pair negative (lane 0) |
| پین 9 | PERp0 — PCI Express receive differential pair positive (lane 0) |
| پین 10 | PERn0 — PCI Express receive differential pair negative (lane 0) |
| پین 11 | REQ_L0 — PCI bus request line 0 (active low) |
| پین 12 | REQ_L1 — PCI bus request line 1 (active low) |
| پین 13 | REQ_L2 — PCI bus request line 2 (active low, also used as strapping input) |
| پین 14 | REQ_L3 — PCI bus request line 3 (active low, also used as strapping input) |
| پین 15 | GNT_L0 — PCI bus grant line 0 (active low) |
| پین 16 | GNT_L1 — PCI bus grant line 1 (active low) |
| پین 17 | GNT_L2 — PCI bus grant line 2 (active low) |
| پین 18 | GNT_L3 — PCI bus grant line 3 (active low) |
| پین 19 | AD31 — PCI address/data bit 31 |
| پین 20 | AD30 — PCI address/data bit 30 |
| پین 21 | AD29 — PCI address/data bit 29 |
| پین 22 | AD28 — PCI address/data bit 28 |
| پین 23 | AD27 — PCI address/data bit 27 |
| پین 24 | AD26 — PCI address/data bit 26 |
| پین 25 | AD25 — PCI address/data bit 25 |
| پین 26 | AD24 — PCI address/data bit 24 |
| پین 27 | C/BE_L3 — PCI command/byte enable 3 (active low) |
| پین 28 | IDSEL — PCI initialization device select |
| پین 29 | AD23 — PCI address/data bit 23 |
| پین 30 | AD22 — PCI address/data bit 22 |
| پین 31 | AD21 — PCI address/data bit 21 |
| پین 32 | AD20 — PCI address/data bit 20 |
| پین 33 | AD19 — PCI address/data bit 19 |
| پین 34 | AD18 — PCI address/data bit 18 |
| پین 35 | AD17 — PCI address/data bit 17 |
| پین 36 | AD16 — PCI address/data bit 16 |
| پین 37 | C/BE_L2 — PCI command/byte enable 2 (active low) |
| پین 38 | FRAME# — PCI cycle frame (active low) |
| پین 39 | IRDY# — PCI initiator ready (active low) |
| پین 40 | TRDY# — PCI target ready (active low) |
| پین 41 | DEVSEL# — PCI device select (active low) |
| پین 42 | STOP# — PCI stop (active low) |
| پین 43 | PAR — PCI parity |
| پین 44 | PERR# — PCI parity error (active low) |
| پین 45 | SERR# — PCI system error (active low) |
| پین 46 | AD15 — PCI address/data bit 15 |
| پین 47 | AD14 — PCI address/data bit 14 |
| پین 48 | AD13 — PCI address/data bit 13 |
| پین 49 | AD12 — PCI address/data bit 12 |
| پین 50 | AD11 — PCI address/data bit 11 |
| پین 51 | AD10 — PCI address/data bit 10 |
| پین 52 | AD9 — PCI address/data bit 9 |
| پین 53 | AD8 — PCI address/data bit 8 |
| پین 54 | C/BE_L0 — PCI command/byte enable 0 (active low) |
| پین 55 | AD7 — PCI address/data bit 7 |
| پین 56 | AD6 — PCI address/data bit 6 |
| پین 57 | AD5 — PCI address/data bit 5 |
| پین 58 | AD4 — PCI address/data bit 4 |
| پین 59 | AD3 — PCI address/data bit 3 |
| پین 60 | AD2 — PCI address/data bit 2 |
| پین 61 | AD1 — PCI address/data bit 1 |
| پین 62 | AD0 — PCI address/data bit 0 |
| پین 63 | REVRSB — Reverse-bridge strap (also strapping input at PERST# de-assertion) |
| پین 64 | GND — Ground |
| پین 65 | CLK0 — PCI clock output 0 |
| پین 66 | CLK1 — PCI clock output 1 |
| پین 67 | CLK2 — PCI clock output 2 |
| پین 68 | CLK3 — PCI clock output 3 |
| پین 69 | M66EN — 66 MHz enable (high = 66 MHz PCI operation) |
| پین 70 | PCIRST# — PCI bus reset (active low) |
| پین 71 | INTA# — PCI interrupt A (active low) |
| پین 72 | INTB# — PCI interrupt B (active low) |
| پین 73 | INTC# — PCI interrupt C (active low) |
| پین 74 | INTD# — PCI interrupt D (active low) |
| پین 75 | REQ64# — PCI 64-bit request (active low, unused in 32-bit mode) |
| پین 76 | ACK64# — PCI 64-bit acknowledge (active low, unused in 32-bit mode) |
| پین 77 | VDD — 3.3 V supply rail |
| پین 78 | GND — Ground |
| پین 79 | JTAG_TCK — JTAG test clock |
| پین 80 | JTAG_TMS — JTAG test mode select |
| پین 81 | JTAG_TDI — JTAG test data in |
| پین 82 | JTAG_TDO — JTAG test data out |
| پین 83 | JTAG_TRST# — JTAG test reset (active low) |
| پین 84 | GPIO0 — General-purpose I/O 0 |
| پین 85 | GPIO1 — General-purpose I/O 1 |
| پین 86 | GPIO2 — General-purpose I/O 2 |
| پین 87 | GPIO3 — General-purpose I/O 3 |
| پین 88 | WAKE# — PCI Express wake (active low) |
| پین 89 | CLKREQ# — PCI Express clock request (active low) |
| پین 90 | PRSNT1# — PCI Express presence detect 1 (add-in card form factor) |
| پین 91 | PRSNT2# — PCI Express presence detect 2 (add-in card form factor) |
| پین 92 | SMBCLK — SMBus clock (optional management interface) |
| پین 93 | SMBDAT — SMBus data (optional management interface) |
| پین 94 | VDD — 3.3 V supply rail |
| پین 95 | GND — Ground |
| پین 96 | NC — Not connected (per datasheet) |
| پین 97 | NC — Not connected (per datasheet) |
| پین 98 | NC — Not connected (per datasheet) |
| پین 99 | NC — Not connected (per datasheet) |
| پین 100 | NC — Not connected (per datasheet) |
| پین 101 | NC — Not connected (per datasheet) |
| پین 102 | NC — Not connected (per datasheet) |
| پین 103 | NC — Not connected (per datasheet) |
| پین 104 | NC — Not connected (per datasheet) |
| پین 105 | NC — Not connected (per datasheet) |
| پین 106 | NC — Not connected (per datasheet) |
| پین 107 | NC — Not connected (per datasheet) |
| پین 108 | VDD — 3.3 V supply rail |
| پین 109 | GND — Ground |
| پین 110 | TEST1 — Factory test pin 1 - leave open or per datasheet |
| پین 111 | TEST2 — Factory test pin 2 - leave open or per datasheet |
| پین 112 | TEST3 — Factory test pin 3 - leave open or per datasheet |
| پین 113 | TEST4 — Factory test pin 4 - leave open or per datasheet |
| پین 114 | NC — Not connected (per datasheet) |
| پین 115 | NC — Not connected (per datasheet) |
| پین 116 | NC — Not connected (per datasheet) |
| پین 117 | NC — Not connected (per datasheet) |
| پین 118 | NC — Not connected (per datasheet) |
| پین 119 | NC — Not connected (per datasheet) |
| پین 120 | NC — Not connected (per datasheet) |
| پین 121 | VDD — 3.3 V supply rail |
| پین 122 | GND — Ground |
| پین 123 | NC — Not connected (per datasheet) |
| پین 124 | NC — Not connected (per datasheet) |
| پین 125 | NC — Not connected (per datasheet) |
| پین 126 | NC — Not connected (per datasheet) |
| پین 127 | NC — Not connected (per datasheet) |
| پین 128 | NC — Not connected (per datasheet) |
کاربردهای معمول
PI7C9X111SLBFDEX مناسب است برای 6 کاربردs: Legacy PCI Card Migration to PCIe Host, Industrial Single-Board Computers (SBCs), Test and Measurement Backplanes, Embedded Vision and Frame-Grabber Adapters, Reverse-Bridge Mode: Legacy PCI Host to PCIe Endpoint, PCIe-to-PCI Adapter Cards and Riser Boards.
Legacy PCI Card Migration to PCIe Host
The PI7C9X111SLBFDEX is the protocol bridge of choice when a modern PCIe-only host CPU must still address one or more legacy 32-bit/66 MHz PCI cards. Plugged between the system's x1 PCIe root port and a 32-bit/66 MHz PCI slot on the carrier board, it transparently translates PCIe TLP transactions to PCI cycles and back, preserving the software/driver stack of the legacy card. Its 32-bit/66 MHz PCI bus keeps data-acquisition, frame-grabber, motion-control, and serial-port cards in production. The reversible architecture also lets the same silicon work in reverse-bridge mode when the legacy host is on the PCI side.
پیشنهادی
Industrial Single-Board Computers (SBCs)
Embedded SBCs and COM Express carrier designs use the PI7C9X111SLBFDEX to expose legacy 32-bit/66 MHz PCI expansion slots on platforms whose application processor only offers PCIe. With the 128-LQFP (14x14) footprint and low power, the bridge fits compact industrial form factors while delivering deterministic 66 MHz PCI bus performance. Clock power management, activated via TM1 low and the REQ_L[3:2]/REVRSB strap, lets the SBC gate downstream PCI clocks when idle - useful for fanless, thermally constrained industrial PCs.
پیشنهادی
Test and Measurement Backplanes
PXI and proprietary test-and-measurement chassis often retain 32-bit/66 MHz PCI instrument modules for decades of installed-base reasons. The PI7C9X111SLBFDEX lets a modern PCIe-only PXI controller slot talk to those legacy modules without re-spinning the chassis backplane. The 32-bit/66 MHz PCI bus keeps the original instrument's data throughput, while the x1 PCIe upstream port cleanly interfaces the system controller. This is also useful for retrofitting new test slots into existing 32-bit/66 MHz PCI test rigs.
پیشنهادی
Embedded Vision and Frame-Grabber Adapters
Many mature machine-vision frame grabbers and industrial cameras ship on the 32-bit/66 MHz PCI form factor. The PI7C9X111SLBFDEX lets an ARM- or x86-based edge-AI SBC interface those frame grabbers over its PCIe port, extending the life of installed vision pipelines. The reversible bridge direction also enables a 32-bit/66 MHz PCI host to expose a PCIe-attached vision module - useful for hybrid factory-floor retrofits. The 128-LQFP package is small enough to fit on the same adapter card as the bridge itself.
پیشنهادی
Reverse-Bridge Mode: Legacy PCI Host to PCIe Endpoint
In reverse-bridge mode the PI7C9X111SLBFDEX sits on a legacy 32-bit/66 MHz PCI host bus and exposes a PCIe downstream port to a PCIe endpoint - the inverse of the typical use case. This is valuable in long-lifecycle industrial controllers where the host CPU still has only PCI and a new PCIe-only sensor, NIC, or storage device must be added. The REVRSB strap pin (read at PERST# de-assertion) configures direction, and the rest of the protocol translation is transparent to host software.
پیشنهادی
PCIe-to-PCI Adapter Cards and Riser Boards
Standard PCIe-to-PCI adapter cards that slot into a desktop PCIe x1 and break out a 32-bit/66 MHz PCI slot on the rear bracket are built around the PI7C9X111SLBFDEX. The 128-LQFP package is a natural fit for a small riser PCB, the low-power consumption avoids exceeding the PCIe slot's 25 W budget, and the same silicon supports both forward and reverse modes for bidirectional retrofits. These cards keep legacy audio cards, modems, and specialty I/O running on modern motherboards.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای PI7C9X111SLBFDEX — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | PI7C9X111SLBFDE | PI7C9X111SLBFDEX-2017 |
|---|---|---|---|
| Package | 128-LQFP (14x14 mm) | 128-LQFP (14x14 mm) - same | 128-LQFP (14x14 mm) - same |
| Brand | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated |
| PCIe Interface | x1 | x1 | x1 |
| PCI Bus Width | 32-bit | 32-bit | 32-bit |
| PCI Bus Speed | 66 MHz | 66 MHz | 66 MHz |
| Bridge Direction | Reversible (forward + reverse) | Reversible (forward + reverse) | Reversible (forward + reverse) |
| Packaging | Tape & Reel (1000/reel) | Tray | Tape & Reel (1000/reel) |
| Clock Power Management | Yes (TM1 strap low + REQ_L[3:2] / REVRSB) | Yes (same strapping) | Yes (same strapping) |
| RoHS Status | Compliant | Compliant | Compliant |
تفاوت‌های کلیدی
- Reversible bridge - forward and reverse operation in one IC (در مقابلPI7C9X111SLBFDE)
- SlimLine low-power architecture in 128-LQFP (14x14 mm) (در مقابلPI7C9X2G404SVAFDEEX)
- Tape & Reel packaging for SMT production (در مقابلPI7C9X111SLBFDE)
یادداشت‌های طراحی
Route the PCIe differential pair (PETp0/PETn0, PERp0/PERn0) with 85 ohm differential impedance and 100 ohm differential reference plane return, with length matching to within 5 mils. Place the 100 nF AC-coupling capacitors on the transmit pair close to the bridge as required by the PCIe spec. REFCLK+/REFCLK- should also be 100 ohm differential, length-matched to the PCIe device, with the 100 MHz reference clock sourced from a low-jitter clock generator or PCIe-compliant oscillator.
The PI7C9X111SLBFDEX operates from a single 3.3 V supply rail. Provide bulk decoupling (10 uF) and high-frequency decoupling (100 nF) close to every VDD pin, and stitch the LQFP ground paddle (if present, per datasheet) to a low-impedance ground plane with multiple vias. Verify in-rush current does not exceed the 3.3 V rail's capacity when the upstream PCIe port enumerates the bridge. Estimated: peak supply current is in the 100-300 mA range for active x1 traffic; final current must be measured on the bench.
PERST# must be de-asserted a minimum Tpvperl after REFCLK is stable, per the PCIe CEM specification. If your system drives PERST# from a power-good signal, add a delay line or RC network to meet the spec. The REVRSB, M66EN, and TM1 strap pins must each have a defined level (high or low) at the rising edge of PERST#; use 10 kohm pull-ups or pull-downs as required by your topology. Strapping these pins via GPIO is acceptable only if the GPIO is tri-stated at the strap sample instant.
Do not omit the 100 nF AC-coupling capacitors on the PCIe transmit pair (PETp0/PETn0) - the upstream PCIe device will not link-train without them. Do not leave any of the CLK0-CLK3 PCI clock outputs floating if not used - either terminate per the PCI spec or disable them via the clock power management strapping. Do not route the 32-bit PCI bus (AD[31:0], C/BE_L[3:0], FRAME#, IRDY#, TRDY#, etc.) over a split ground plane - the 66 MHz bus edges have very tight setup/hold margins.
اطلاعات انطباق
RoHS compliance per Diodes product page. AEC-Q100 not applicable - this is an industrial/commercial interface bridge, not an automotive-qualified part. Halogen-free status not stated in the verified web data - set to unknown.
