Diodes Incorporated

PI7C9X1172BZHEX - Dual UART I2C/SPI Bridge | Diodes

MPN: PI7C9X1172BZHEX ✓ فعال
1.8 V Vdss 32-QFN Package
حداقل سفارش: 1 |

PI7C9X1172BZHEX نمای کلی

Diodes Incorporated PI7C9X1172BZHEX is a serial-interface bridge integrated circuit that converts I2C or SPI transactions into two-channel UART communication. The device operates from 1.8 V, 2.5 V, or 3.3 V supply rails and is packaged in a 32-QFN housing measuring 5 mm by 5 mm. Its principal function is to bridge a serial bus used by a host or embedded controller with two independent UART channels used by external equipment.

An I2C/SPI-to-UART bridge is an interface IC within the broader serial-interface and communication-controller category. It allows equipment that lacks convenient UART peripherals to exchange serial data through a host-oriented I2C or SPI bus. The PI7C9X1172BZHEX can therefore serve as a protocol-conversion and I/O-expansion element in systems that need to connect serial peripherals, control ports, or communication modules without dedicating multiple UART channels in the main controller.

The key documented characteristics include support for I2C and SPI host-side protocols, two UART channels, operation from 1.8 V, 2.5 V, or 3.3 V supplies, and a compact 32-QFN package. The 5 mm by 5 mm QFN construction supports dense PCB layouts, although its exposed-pad thermal and layout requirements must be implemented according to the manufacturer's package information. Because the package has 32 terminals, its footprint requires careful fanout routing between the fine-pitch perimeter pads and the exposed thermal pad.

The device is positioned for embedded control, industrial communication, instrumentation, and equipment-connection applications where an existing I2C or SPI processor interface must provide access to two UART channels. The selectable 1.8 V, 2.5 V, and 3.3 V operating options also permit integration with common low-voltage digital systems. Exact UART baud-rate limits, I2C/SPI timing, logic thresholds, electrical characteristics, and channel-configuration details should be confirmed in the manufacturer datasheet before a production design is released.

Typical implementations place the bridge beside the controlled peripheral and connect the host controller through I2C or SPI. Software then performs protocol translation while the UART side connects to the target equipment. A key design consideration is matching the bridge's supply voltage, host-bus logic levels, pin multiplexing, and UART signal requirements to the connected devices. Decoupling and exposed-pad handling should follow the manufacturer's recommended layout to limit supply disturbance and maintain reliable operation in compact assemblies.

This product page consolidates the confirmed interface function, supply options, package details, sourcing information, and replacement analysis into an engineering-focused reference. The PI7C9X1172BZHEX is most appropriate when a design requires a dedicated I2C/SPI-to-dual-UART bridge in a 32-QFN footprint. Production adoption should include verification of the complete electrical specification, pin assignment, timing limits, and package drawing against the current manufacturer documentation.

جایگزین‌های drop-in برای PI7C9X1172BZHEX — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

هیچ جایگزین مستقیمی برای این محصول موجود نیست.

درخواست جایگزین

PI7C9X1172BZHEX حداکثر مقادیر مجاز و مشخصات الکتریکی

Device Type I2C/SPI to dual-channel UART bridge
Host-Side Protocols I2C and SPI
UART Channel Count 2 channels
Supply Voltage Option 1 1.8 V
Supply Voltage Option 2 2.5 V
Supply Voltage Option 3 3.3 V
Package Type 32-QFN
Package Dimensions 5 mm x 5 mm
Device Classification UART interface IC
Manufacturer Diodes Incorporated

راهنمای پیکربندی پین PI7C9X1172BZHEX 5 mm x 5 mm

پیکربندی پین برای PI7C9X1172BZHEX (پکیج 5 mm x 5 mm). این قطعه قدرت دارای پایانه‌های گیت، درین و سورس است. برای پکیج‌های غیرقطبی، برای جهت دقیق پین ۱ و جزئیات فوت‌پرینت به دیتاشیت سازنده مراجعه کنید. کاربردهای رایج شامل طراحی منبع تغذیه، درایو موتور و سوئیچینگ بار است.

نمودار پین‌آوت پکیج 5 mm x 5 mm برای PI7C9X1172BZHEX

داده پین‌آوت تفصیلی موجود نیست برای PI7C9X1172BZHEX.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

PI7C9X1172BZHEX مناسب است برای 6 کاربردs: Embedded Control with Dual UART Peripherals, Industrial Sensor and Controller Networking, Instrumentation with Multiple Serial Devices, Communication Adapter and Protocol Converter, Portable and Battery-Powered Equipment, Data Acquisition Front End.

🔧

Embedded Control with Dual UART Peripherals

The PI7C9X1172BZHEX fits systems whose main controller exposes I2C or SPI but must also communicate with two UART-based peripherals. The host-side bridge connection consolidates both UART channels behind a serial processor interface, reducing the need for dedicated UART hardware in the primary controller. Its documented 1.8 V, 2.5 V, and 3.3 V supply options support common low-voltage embedded platforms. During implementation, confirm the host-bus timing, configuration method, UART baud-rate limits, and exact 32-QFN pin assignments before releasing the PCB.

🏭

Industrial Sensor and Controller Networking

The PI7C9X1172BZHEX can connect two UART-oriented industrial sensors or controllers to an I2C- or SPI-capable supervisory processor. This arrangement is useful when the supervisory controller handles higher-level sequencing while external modules retain conventional UART command interfaces. The bridge's two-channel structure avoids assigning separate processor UART resources to each module. For industrial equipment, verify electrical levels, isolation requirements, surge exposure, and timing margins against the exact manufacturer specification.

🔧

Instrumentation with Multiple Serial Devices

Test and measurement instruments often combine an I2C or SPI control processor with legacy UART instruments. The PI7C9X1172BZHEX provides a protocol-conversion path for two UART devices while retaining the processor's preferred host-side bus. Its compact 5 mm by 5 mm 32-QFN package helps conserve board area in dense instrumentation. Designers should confirm supported baud rates, parity and data-bit configurations, and host command timing, then validate protocol translation with representative peripherals.

🌐

Communication Adapter and Protocol Converter

The PI7C9X1172BZHEX can serve as the interface-conversion element in a communication adapter that accepts I2C or SPI commands and forwards them to two UART endpoints. This topology is useful for retrofitting UART-based modules into I2C- or SPI-oriented control ecosystems without redesigning the endpoint firmware. The three documented supply options, 1.8 V, 2.5 V, and 3.3 V, permit use across different logic domains, subject to confirming compatible voltage levels and the manufacturer's operating limits.

📱

Portable and Battery-Powered Equipment

In portable equipment, a system processor may use I2C or SPI internally while a few external modules still require UART links. The PI7C9X1172BZHEX adds those links through a compact 5 mm by 5 mm 32-QFN device rather than requiring a larger external bridge. Its 1.8 V supply option is relevant to low-voltage portable designs. Battery-operated implementations should still evaluate idle current, active current, sleep behavior, and regulator headroom using the exact manufacturer electrical characteristics.

🖥️

Data Acquisition Front End

A data-acquisition controller using I2C or SPI for configuration can use the PI7C9X1172BZHEX to connect two UART-facing measurement or communication modules. The dual-channel bridge reduces host pin count and centralizes protocol conversion in a dedicated interface IC. Because measurement accuracy can be affected by supply noise and timing margins, place the bridge with appropriate decoupling, route UART signals away from sensitive analog nets, and confirm acquisition-device baud-rate and framing requirements.

What is the PI7C9X1172BZHEX?
The PI7C9X1172BZHEX is a Diodes Incorporated interface IC that bridges an I2C or SPI host bus to two UART channels. According to the manufacturer product listing, it is categorized as an I2C/SPI-to-two-channel UART bridge and is packaged in a 32-QFN housing measuring 5 mm by 5 mm. It is useful when a main controller has an I2C or SPI interface but the connected equipment requires one or two UART ports.
What is the operating voltage of PI7C9X1172BZHEX?
The PI7C9X1172BZHEX supports 1.8 V, 2.5 V, and 3.3 V operation. These values are confirmed by the Diodes Incorporated product details carried in the DigiKey and Mouser listings. The chosen rail should match the logic requirements of the host controller and connected UART equipment, while the power design must also account for the bridge's peak current consumption when the corresponding operating and current limits are confirmed in the manufacturer datasheet.
Where can I find the PI7C9X1172BZHEX datasheet PDF?
The PI7C9X1172BZHEX datasheet should be obtained from Diodes Incorporated's official product documentation or through the datasheet link associated with the exact manufacturer listing. The available product pages identify the part as a 32-QFN, 5 mm by 5 mm dual-UART bridge, but they do not expose a verified manufacturer PDF URL in their summaries. Request the current manufacturer datasheet before finalizing pin assignments, timing, electrical limits, and PCB layout.
Where can I find the PI7C9X1172BZHEX pinout?
The PI7C9X1172BZHEX pinout must be taken from the manufacturer's 32-QFN pin-description table because the product summaries do not provide the numbered terminal assignments. Do not infer terminal functions from a similarly named part or from the 28-TSSOP version. Use the exact PI7C9X1172BZHEX package drawing and pin table to assign supplies, ground, host-interface signals, UART signals, configuration inputs, and the exposed pad.
What protocols does the PI7C9X1172BZHEX support?
The PI7C9X1172BZHEX supports I2C or SPI on its host side and provides two UART channels on its peripheral side. According to the Diodes Incorporated product descriptions, the device is an I2C/SPI-to-two-channel UART bridge. This combination allows embedded controllers to manage two serial peripherals through a host bus, although exact address allocation, baud-rate generation, and configuration commands require the current manufacturer datasheet.
What package does the PI7C9X1172BZHEX use?
The PI7C9X1172BZHEX uses a 32-QFN package measuring 5 mm by 5 mm. The manufacturer listing identifies the package as 32-QFN (5x5), and the part-number suffix identifies the QFN format. Its exposed-pad construction requires the land pattern and thermal-via arrangement specified for this package, so an existing 32-QFN footprint must not be assumed to be compatible without checking pad dimensions and exposed-pad geometry.
What can replace the PI7C9X1172BZHEX?
No verified drop-in replacement for the PI7C9X1172BZHEX can be identified from the available cross-reference results. A valid replacement must use the same 32-QFN footprint, preserve pin-to-pin assignments, and match the 1.8 V, 2.5 V, or 3.3 V operating requirements and dual-UART function. The related PI7C9X1172BLE is not a drop-in option because its listed 28-TSSOP package differs from the target's 32-QFN package.
Can the PI7C9X1172BZHEX be used with a 3.3 V microcontroller?
The PI7C9X1172BZHEX can operate from a 3.3 V supply, making it a candidate for 3.3 V embedded systems. The Diodes Incorporated product information explicitly lists 3.3 V alongside 1.8 V and 2.5 V. Compatibility still depends on matching input and output logic levels, respecting absolute maximum ratings, configuring the two UART channels correctly, and confirming the timing of the selected I2C or SPI host interface.
How many UART channels does the PI7C9X1172BZHEX provide?
The PI7C9X1172BZHEX provides two UART channels. This is confirmed by the Diodes Incorporated product descriptions, which identify the part as an I2C/SPI-to-two-channel UART bridge. The dual-channel arrangement lets one host-side serial connection serve two UART peripherals, potentially reducing the number of dedicated UART peripherals required in the host controller.
Where can I buy the PI7C9X1172BZHEX and check its price?
Use the Request a Quote form on this page to ask for PI7C9X1172BZHEX pricing, stock, minimum order quantity, and delivery. The available listings identify authorized distribution channels, but their summaries do not print qualifying quantity-break prices for this exact MPN, so no static price is published here. A firm quotation should also confirm the 32-QFN package, shipping configuration, lead time, and authorized-channel status.
What is the lead time for the PI7C9X1172BZHEX?
The current lead time for the PI7C9X1172BZHEX should be requested through the Request a Quote form on this page. The product listings show that the part is cataloged for order, but they do not state a reliable production lead time or guaranteed stock quantity in their summaries. For planning purposes, ask the supplier to confirm manufacturing availability, allocation, reel quantity, and the date on which the order can ship.
Is the PI7C9X1172BZHEX currently available?
The PI7C9X1172BZHEX is listed by multiple distribution channels and is shown as orderable in the available catalog information. Exact inventory can change rapidly, so use the Request a Quote form on this page for the current allocation rather than treating the existence of a listing as a stock guarantee. The quotation should identify the manufacturer, exact suffix, package, quantity, and expected ship date.
PI7C9X1172BZHEX vs PI7C9X1172BLE — which fits a 32-QFN PCB?
The PI7C9X1172BZHEX is the appropriate choice for a PCB designed around a 32-QFN footprint because the manufacturer listing identifies that package as 32-QFN (5x5). The PI7C9X1172BLE is listed in 28-TSSOP, so it is not pin-compatible and would require a different footprint. Both provide the general I2C/SPI-to-dual-UART function, but package compatibility is decisive for a drop-in decision.
When should I choose the PI7C9X1172BZHEX over a software UART implementation?
Choose the PI7C9X1172BZHEX when the design needs two UART channels and the host already communicates reliably over I2C or SPI. The dedicated bridge offloads serial framing and channel management from the host software while using a compact 5 mm by 5 mm 32-QFN package. A software UART may be simpler when timing margins are generous and the host has enough processing capacity, but it can make baud-rate accuracy and interrupt load more design-sensitive.
What are the key specifications of PI7C9X1172BZHEX that engineers should know?
The PI7C9X1172BZHEX is a Diodes Incorporated I2C/SPI-to-two-channel UART bridge with 1.8 V, 2.5 V, and 3.3 V supply options in a 32-QFN, 5 mm by 5 mm package. Its confirmed feature set centers on protocol bridging, dual UART output, low-voltage operation, and a compact surface-mount footprint. Maximum baud rate, timing, current consumption, logic thresholds, and terminal assignments must be taken from the exact manufacturer datasheet.

داده‌های مرجع مهندسی برای PI7C9X1172BZHEX — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the PI7C9X1172BZHEX when an embedded controller uses I2C or SPI and the design needs two UART channels, particularly where PCB density favors a 5 mm by 5 mm 32-QFN package. It is also suitable for industrial, instrumentation, communication-adapter, and portable applications operating from 1.8 V, 2.5 V, or 3.3 V. Software UART may be adequate when processing capacity is plentiful and timing margins are wide, but it can shift accuracy and interrupt-load risks into the firmware. The PI7C9X1172BLE can serve similar protocol-conversion functions, but its 28-TSSOP package prevents drop-in use on a PI7C9X1172BZHEX PCB. No same-package cross-brand replacement is established, so a redesign should be considered before changing manufacturers.

مقایسه با جایگزین‌ها

پارامتر این محصول
Brand Diodes Incorporated
Package 32-QFN (5x5 mm)
Device Type I2C/SPI to dual-channel UART bridge
Host-Side Protocols I2C and SPI
UART Channel Count 2 channels
Supply Voltage Options 1.8 V, 2.5 V, 3.3 V
Package Dimensions 5 mm x 5 mm
Mounting Technology Surface-mount QFN
Related 28-TSSOP Version Not applicable; PI7C9X1172BZHEX uses 32-QFN

تفاوت‌های کلیدی

  • Dedicated dual-UART conversion behind one host interface (در مقابلSoftware-UART implementation)
  • Three low-voltage supply options (در مقابلPI7C9X1172BLE)
  • Different package choices for different PCB constraints (در مقابلPI7C9X1172BLE)

یادداشت‌های طراحی

Design the 32-QFN footprint directly from the PI7C9X1172BZHEX package drawing rather than copying a generic QFN-32 land pattern. Confirm pad length, pad width, pitch, exposed-pad dimensions, solder-mask clearance, and paste stencil geometry. Connect the exposed pad to the intended ground or supply plane only as specified by the manufacturer, and place via arrays and decoupling capacitors in accordance with the recommended layout.

Provide a local supply rail and place the required bypass capacitor adjacent to the device's supply and ground terminals. Keep the I2C or SPI host traces and UART signals away from noisy switching-regulator paths. The bridge supports 1.8 V, 2.5 V, and 3.3 V operation, but the selected supply must also satisfy the connected devices' logic levels. Confirm peak current and startup behavior in the manufacturer datasheet before setting regulator margin.

Do not substitute a similarly named part solely because it performs I2C/SPI-to-UART conversion. The PI7C9X1172BZHEX uses a 32-QFN package, whereas the listed PI7C9X1172BLE uses a 28-TSSOP package and therefore cannot replace it without PCB changes. Verify the exact pin assignment, protocol mode, configuration method, address allocation, and timing behavior for the replacement before approving it for production.

Treat I2C, SPI, and UART routing as separate interface groups during PCB planning. Keep the I2C bus away from long, unterminated SPI traces and noisy UART edges, observe the bus timing required by the selected host speed, and provide the pull-ups and termination arrangements prescribed for each interface. Validate the assembled design with rise-time, timing-margin, and communication-error measurements across all three supported supply voltages.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The available product listings confirm manufacturer, interface function, supply options, and package, but do not state RoHS, REACH, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not indicated for this general-purpose interface device.

تاریخ تأیید داده‌ها: 2026-11-17 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

PI7C9X1172BZHEX PI7C9X1172BZHEX datasheet PI7C9X1172BZHEX datasheet pdf PI7C9X1172BZHEX pinout PI7C9X1172BZHEX equivalent PI7C9X1172BZHEX replacement PI7C9X1172BZHEX footprint PI7C9X1172BZHEX price PI7C9X1172BZHEX stock Diodes PI7C9X1172BZHEX PI7C9X1172BZHEX 32-QFN PI7C9X1172BZHEX I2C SPI UART PI7C9X1172BZHEX dual UART bridge PI7C9X1172BZHEX vs PI7C9X1172BLE PI7C9X1172BZHEX application circuit

قطعات و اصطلاحات مرتبط

Diodes Incorporated PI7C9X1172BZHEX PI7C9X1172BLE I2C SPI UART I2C/SPI-to-UART bridge interface IC serial interface protocol converter communication controller semiconductor 32-QFN QFN family surface mount SMD 5 mm x 5 mm package dual UART 1.8 V 2.5 V 3.3 V embedded control industrial communication data acquisition
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ