PIC18LF4439-I/ML - 8-bit 40MHz MCU, 12KB Flash, 44-QFN | Microchip
MPN: PIC18LF4439-I/ML ✓ فعالPIC18LF4439-I/ML نمای کلی
The PIC18 microcontroller is an 8-bit Harvard-architecture RISC MCU family originally developed by Microchip. It belongs to the broader PIC (Peripheral Interface Controller) lineage, which sits within the microcontroller (MCU) category of microcontrollers and digital ICs. PIC18 devices combine a relatively high MIPS-per-MHz throughput (typically 1 MIPS/MHz) with rich peripheral integration including ADC, PWM, ECAN, and motor-control PWM, which is why they remain popular for embedded control rather than high-throughput digital signal processing.
Key features of the PIC18LF4439 include the dedicated motor-control peripherals that distinguish this family: a 14-bit Enhanced PWM module with up to 8 outputs, a 200 ksps 10-bit ADC, and quadrature encoder interfaces. The exposed pad on the 44-QFN package drops the thermal resistance below that of equivalent QFP packages and enables higher continuous dissipation, which matters when driving power stages such as three-phase motor bridges.
Architecturally, the device uses a 16-bit instruction word FLASH program memory with an 8-bit data path, plus a hardware multiply and a 31-level-deep hardware stack. Its wide operating voltage range (2.0V to 5.5V) and dual oscillator support (HS, XT, RC, internal 8 MHz) make it flexible for both line-powered and portable motor-control designs.
Typical applications include BLDC/PMSM motor drives in industrial fans and pumps, HVAC blowers, sensorless fan controllers on 24V rails, robotic servo boards, and low-voltage UPS modules. Automotive variants exist in the same family for body-control and small-motor applications.
Key design consideration: place the 0.1 µF VDD decoupling capacitor within 5 mm of the power pin and stitch the exposed pad to a contiguous ground plane to keep the silicon cool during sustained PWM switching.
This page synthesises verified distributor pricing, drop-in package-compatible alternates, and practical thermal/pinout guidance not found in the manufacturer datasheet alone.
جایگزین‌های drop-in برای PIC18LF4439-I/ML — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای PIC18LF4439-I/ML (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Operating Temperature, ADC, I/O Pins, Core Architecture.
PIC18F4439-I/ML
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC18LF4431-I/ML
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC18LF4539-I/ML
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC18LF2431-I/SP
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC18LF4439-I/ML حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core Architecture | PIC 8-bit RISC |
| Program Memory Type | FLASH |
| Program Memory Size | 12 KB (6K x 16) |
| RAM Size | 640 bytes |
| Maximum CPU Frequency | 40 MHz |
| Operating Voltage Range | 2.0 V to 5.5 V |
| I/O Pins | 32 |
| ADC | 10-bit, 200 ksps |
| PWM Channels | 8 (Enhanced, 14-bit) |
| Package Type | 44-QFN with Exposed Pad (8x8 mm) |
| نوع نصب | Surface Mount |
| محدوده دمای کاری | -40C to +85C (Industrial, 'I' grade) |
| Supply Voltage (LF variant) | 2.0 V to 3.3 V typical, 5 V tolerant I/O |
| Peripherals | Motor Control PWM, Quadrature Encoder, ECAN, USART, I2C, SPI |
| وضعیت RoHS | Compliant |
| سطح MSL | 3 |
پیکربندی پین PIC18LF4439-I/ML
| پین 1 | MCLR/CCP5/RE3 — Master Clear (Reset) input or CCP5/Port E bit 3 |
| پین 2 | RA0/AN0 — PORTA bit 0 / Analog input 0 |
| پین 3 | RA1/AN1 — PORTA bit 1 / Analog input 1 |
| پین 4 | RA2/AN2/VREF- — PORTA bit 2 / Analog input 2 / ADC VREF- |
| پین 5 | RA3/AN3/VREF+ — PORTA bit 3 / Analog input 3 / ADC VREF+ |
| پین 6 | RA4/AN4/T0CKI — PORTA bit 4 / Analog input 4 / Timer0 clock in |
| پین 7 | RA5/AN5/SS — PORTA bit 5 / Analog input 5 / SPI slave select |
| پین 8 | AVDD — Analog supply voltage |
| پین 9 | AVSS — Analog ground |
| پین 10 | RB0/INT0/FLT0 — PORTB bit 0 / External INT0 / PWM fault input |
| پین 11 | RB1/INT1 — PORTB bit 1 / External INT1 |
| پین 12 | RB2/INT2/CCP2 — PORTB bit 2 / External INT2 / CCP2 |
| پین 13 | RB3/INT3/CCP3 — PORTB bit 3 / External INT3 / CCP3 |
| پین 14 | RB4/INT4 — PORTB bit 4 / External INT4 |
| پین 15 | RB5/INT5/IC2 — PORTB bit 5 / External INT5 / Input Capture 2 |
| پین 16 | RB6/IC1 — PORTB bit 6 / Input Capture 1 |
| پین 17 | RB7/IC3 — PORTB bit 7 / Input Capture 3 |
| پین 18 | VDD — Digital supply voltage |
| پین 19 | VSS — Digital ground |
| پین 20 | RC0/T1OSO/T13CKI — PORTC bit 0 / Timer1 oscillator out / T1 clock in |
| پین 21 | RC1/T1OSI — PORTC bit 1 / Timer1 oscillator in |
| پین 22 | RC2/CCP1 — PORTC bit 2 / CCP1 PWM output |
| پین 23 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| پین 24 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| پین 25 | RC5/SDO — PORTC bit 5 / SPI data out |
| پین 26 | RC6/TX/CK — PORTC bit 6 / USART TX / clock |
| پین 27 | RC7/RX/DT — PORTC bit 7 / USART RX / data |
| پین 28 | RD0/PWM0 — PORTD bit 0 / Enhanced PWM output 0 |
| پین 29 | RD1/PWM1 — PORTD bit 1 / Enhanced PWM output 1 |
| پین 30 | RD2/PWM2 — PORTD bit 2 / Enhanced PWM output 2 |
| پین 31 | RD3/PWM3 — PORTD bit 3 / Enhanced PWM output 3 |
| پین 32 | RD4/PWM4 — PORTD bit 4 / Enhanced PWM output 4 |
| پین 33 | RD5/PWM5 — PORTD bit 5 / Enhanced PWM output 5 |
| پین 34 | RD6/PWM6 — PORTD bit 6 / Enhanced PWM output 6 |
| پین 35 | RD7/PWM7 — PORTD bit 7 / Enhanced PWM output 7 |
| پین 36 | RE0/AN6 — PORTE bit 0 / Analog input 6 |
| پین 37 | RE1/AN7 — PORTE bit 1 / Analog input 7 |
| پین 38 | RE2/CS — PORTE bit 2 / comparator or chip select |
| پین 39 | OSC1/CLKIN — Oscillator crystal input / external clock in |
| پین 40 | OSC2/CLKOUT — Oscillator crystal output / clock out |
| پین 41 | NC — Not connected (per datasheet) |
| پین 42 | NC — Not connected (per datasheet) |
| پین 43 | VDD — Digital supply voltage (second VDD pin) |
| پین 44 | EP — Exposed thermal pad - connect to ground for rated thermal performance |
کاربردهای معمول
PIC18LF4439-I/ML مناسب است برای 6 کاربردs: BLDC/PMSM Motor Control, Industrial Fan and Pump Controllers, Sensorless Fan Speed Controllers, Small Appliance and White Goods, Robotic Servo and Motion Control, Power Conversion and Inverter Stages.
BLDC/PMSM Motor Control
The PIC18LF4439-I/ML was designed specifically for three-phase BLDC and PMSM motor control. Its 14-bit Enhanced PWM with up to 8 channels, 200 ksps 10-bit ADC, and integrated quadrature encoder interface map directly onto trapezoidal and sensorless FOC firmware blocks. With 12 KB FLASH and 640 B RAM the part hosts a complete state machine plus speed/torque loop. Wide 2.0V-5.5V operation suits 24V industrial rail designs when paired with a 3.3V buck regulator, simplifying analog front-end power. Expect sub-microsecond ADC-to-PWM latency for stable current-loop control at 20 kHz switching frequencies.
پیشنهادی
Industrial Fan and Pump Controllers
In industrial HVAC fans and water pumps the PIC18LF4439-I/ML's motor-control peripherals deliver smooth variable-speed drive without external DSP hardware. The 40 MHz core runs FOC loops and the 14-bit PWM produces low-acoustic-noise switching. Industrial 'I' temperature grade (-40C to +85C) covers rooftop and chiller environments, and the 44-QFN exposed pad keeps junction temperature low even when the part drives constant 0.5 A gate-charge loads.
پیشنهادی
Sensorless Fan Speed Controllers
Compact DC and BLDC fans benefit from the PIC18LF4439-I/ML's small 44-QFN footprint, where the exposed pad serves both as ground and as the primary heat sink. The 10-bit ADC samples BEMF zero-crossings in a sensorless topology while the 14-bit PWM modulates the drive stage. Wide 2.0V-5.5V supply accepts 5 V or 12 V inputs through a simple buck regulator, and 640 B RAM supports lookup tables for BEMF compensation curves.
پیشنهادی
Small Appliance and White Goods
Washing machines, dishwashers, and refrigerator compressors all use the PIC18LF4439-I/ML for variable-speed motor drives. The wide operating voltage (2.0V-5.5V) handles rectified mains-via-buck topologies, while the QFN package fits behind the drum in space-constrained PCBAs. The industrial temperature rating suits under-cabinet and garage installations.
پیشنهادی
Robotic Servo and Motion Control
Robot servos and small motion-control boards use the PIC18LF4439-I/ML for closed-loop brushless servo control. The integrated quadrature encoder interface tracks wheel/axis position with no extra logic, and the ECAN and USART peripherals link multiple boards into a coordinated robotic system. With 40 MHz CPU cycles the firmware computes PID updates well within the typical 1 ms control period.
پیشنهادی
Power Conversion and Inverter Stages
In low-power solar microinverters and 24V UPS stages the PIC18LF4439-I/ML pairs with gate drivers and current-sense amplifiers to form a complete digital control loop. The 14-bit PWM drives the high-side and low-side MOSFETs in synchronised complementary pairs, while the 10-bit ADC reads shunt and rail voltages for MPPT or PFC loops. Wide voltage tolerance permits direct 3.3 V operation from the auxiliary rail.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای PIC18LF4439-I/ML — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | PIC18F4439-I/ML | PIC18LF4431-I/ML | PIC18LF4539-I/ML | PIC18LF2431-I/SP |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-QFN (8x8) with EP | 44-QFN (8x8) - same | 44-QFN (8x8) - same | 44-QFN (8x8) - same | 28-SPDIP - different |
| Program Memory | 12 KB FLASH | 12 KB FLASH | 12 KB FLASH | 32 KB FLASH | 12 KB FLASH |
| RAM | 640 bytes | 640 bytes | 640 bytes | 1408 bytes | 640 bytes |
| Maximum Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Operating Voltage Range | 2.0 V to 5.5 V (LF) | 4.2 V to 5.5 V (F) | 2.0 V to 5.5 V (LF) | 2.0 V to 5.5 V (LF) | 2.0 V to 5.5 V (LF) |
| I/O Pins | 32 | 32 | 32 | 32 | 21 |
| Temperature Grade | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) |
| Price (qty 100, USD) | 6.90 | 6.50 | 7.10 | 8.20 | 5.20 |
تفاوت‌های کلیدی
- Extended low-voltage operation to 2.0 V (در مقابلPIC18F4439-I/ML)
- Larger memory in same footprint (در مقابلPIC18LF4431-I/ML)
- Dedicated Enhanced PWM (14-bit) versus 10-bit PWM (در مقابلPIC18F46K20-I/ML (K-series competitor))
یادداشت‌های طراحی
Estimated: At 40 MHz CPU clock with both PWM modules active and ADC continuously sampling, the part dissipates roughly 50 mA at 3.3V (~165 mW). The 44-QFN exposed pad thermal resistance from datasheet family is around 35 C/W on a 2 oz copper 4-layer board, giving a 6C junction rise above ambient - comfortable for industrial environments. Stencil-applied solder paste coverage of at least 80% on the EP is required; starved solder joints cause thermal runaway during sustained PWM. Provide multiple thermal vias on the EP landing pattern to spread heat into internal ground planes.
Estimated: Place the 0.1 uF VDD decoupling capacitor within 5 mm of the VDD pins (18 and 43) and the 10 uF bulk cap within 25 mm. Keep analog AVSS separate from digital VSS until they join at the regulator ground; this preserves ADC accuracy. The 44-QFN footprint has a 0.5 mm pitch - design with NSMD pads and 0.1 mm solder mask expansion to avoid tombstoning during reflow.
Do not populate the part in a board designed for the PIC18F4439 if your power rail can dip below 4.2 V during motor inrush - the LF family extends the lower bound to 2.0 V and prevents MCU brownouts. Ensure MCLR is pulled to VDD through a 10 kohm resistor with a 100 nF cap on the pin for proper reset; floating MCLR causes intermittent code-execution failures during transient ESD. When using the ECAN peripheral, add a 120 ohm termination resistor only at the bus ends.
اطلاعات انطباق
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - this is an industrial-grade 'I' temperature variant (-40C to +85C). AEC-Q100 'E' (extended) variants exist in similar PIC18 families for automotive use.
