Texas Instruments

SN74AC240N - 8-Channel 3-State Inverter | Texas Instruments

MPN: SN74AC240N ✓ فعال
2 V to 6 V Vdss 20-pin PDIP Package
حداقل سفارش: 1 |

SN74AC240N نمای کلی

Texas Instruments SN74AC240N is an eight-channel CMOS octal buffer and line driver with inverting, three-state outputs, a 2 V to 6 V supply range, and a 20-pin PDIP package. The device is organized as two four-channel groups with separate output-enable controls, allowing eight bus outputs to be driven, disabled, or placed in a high-impedance state without changing the logic polarity of the incoming signals.

An octal buffer/line driver is a logic IC used to increase drive strength and isolate a data bus from the load presented by downstream inputs. A three-state output can actively drive a logic level, remain at high impedance, or be placed in the high-impedance state by its output-enable input. This family belongs to the CMOS logic hierarchy, where AC-series devices operate from a 2 V to 6 V supply and are designed for low-voltage digital systems requiring buffered bus signals.

The SN74AC240N provides eight inverting channels and separate controls for two four-channel output groups. Its principal features are the 2 V to 6 V operating range, eight channels, three-state output capability, and separate output enables. These characteristics make it useful when a system needs controlled bus isolation, increased source current for lightly loaded interconnects, or a defined way to disconnect portions of a bidirectional bus during a shared-bus architecture.

Each output section combines an input buffer with an output driver capable of assuming a high-impedance state when its associated output-enable input is inactive. The two four-channel groups can be enabled independently, which supports segmented bus control. Because the outputs are inverting, system logic must account for reversed polarity at every driven signal. A three-state output does not actively hold the bus at a valid level while disabled; the receiving system must provide suitable pull-up or pull-down behavior when another device can drive that net.

Typical uses include memory address buffering, clock distribution, bus-oriented receivers and transmitters, control-signal isolation, and industrial digital interfaces. The part is also suitable when several compatible devices share a common data path and only selected groups should drive it at a given time. Independent output-enable control simplifies arbitration, test access, and expansion of a shared bus.

PCB design should keep the 20-pin PDIP footprint free of unintended shorts and route high-speed or noise-sensitive nets away from supply and return-current paths. Input and output-enable signals should have defined levels at every operating state, including power-up. Designers should also verify that all devices connected to a shared bus have compatible voltage levels and that their output-enable controls cannot overlap in an unintended drive condition.

This product overview combines the device function, package, supply range, and bus-driver use cases with practical guidance for output-state control, polarity, and shared-bus implementation. It also organizes drop-in replacement information and engineering-oriented comparisons to support component selection before PCB release.

جایگزین‌های drop-in برای SN74AC240N — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

MC74AC240NG

✅ جایگزین مستقیم
📦 20-PDIP
Same octal AC240 three-state buffer function; exact timing, current, and qualification differences require datasheet comparison.

📋 جایگزین مرجع (خارج از کاتالوگ)

CD74AC240E

✅ جایگزین مستقیم
📦 20-PDIP
Same octal AC240 inverting three-state buffer function; exact electrical and qualification differences require datasheet comparison.

📋 جایگزین مرجع (خارج از کاتالوگ)

CD74AC240EE4

✅ جایگزین مستقیم
📦 20-PDIP
Same octal AC240 three-state buffer function in a PDIP option; timing, temperature grade, and qualification require comparison.

📋 جایگزین مرجع (خارج از کاتالوگ)

SN74AC240N حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type Octal inverting buffer/line driver with three-state outputs
Number of Channels 8 channels
Channel Organization 2 groups of 4 channels
Output Polarity Inverting
Output State Three-state, including high-impedance
Supply Voltage Range 2 V to 6 V
Output Enable Control Separate control for each 4-channel group
بسته‌بندی 20-pin PDIP
نوع نصب Through-hole
Logic Family AC CMOS
Number of Inputs 8 data inputs and 2 output-enable inputs
تعداد خروجی‌ها 8 three-state outputs

راهنمای پیکربندی پین SN74AC240N 20-pin pdip

پیکربندی پین برای SN74AC240N (پکیج 20-pin pdip). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 20-pin pdip برای SN74AC240N

داده پین‌آوت تفصیلی موجود نیست برای SN74AC240N.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

SN74AC240N مناسب است برای 6 کاربردs: Memory Address Buffering, Clock Signal Distribution, Shared Bus Isolation, Control Signal Isolation, Industrial Digital Interface, Test and Measurement Logic.

🖥️

Memory Address Buffering

The SN74AC240N is suitable for buffering memory-address signals because it provides eight inverting channels, a 2 V to 6 V supply range, and three-state outputs in a 20-pin PDIP package. Two independently controlled four-channel groups can drive address-related sections selectively, reducing loading on the originating logic. The inverting polarity must be reflected in address decoding or corrected upstream. Because a disabled output becomes high impedance, the connected memory bus should include suitable pull-up or pull-down arrangements so its inactive level remains defined.

⏱️

Clock Signal Distribution

The SN74AC240N can distribute clock signals to multiple logic destinations when isolation and controlled bus participation are important. Its eight inverting three-state outputs and two separate output-enable groups support segmented clock routing, while the 2 V to 6 V operating range matches low-voltage CMOS systems. Because each output reverses polarity, the receiving clock domain must tolerate the inverted transition. Timing margin should be evaluated at the system level, particularly when several clocked devices are connected to the driven net.

🌐

Shared Bus Isolation

The SN74AC240N is useful on a shared bus where multiple devices must connect without driving the same net simultaneously. Eight three-state outputs reduce the risk of contention when the two output-enable groups are controlled separately, and the device operates across a 2 V to 6 V supply range. The design must guarantee exclusive drive ownership in every operating state, including reset and power-up. Pull resistors or another valid biasing method should keep disabled bus nets from floating.

🏭

Control Signal Isolation

The SN74AC240N can isolate groups of control signals between logic sections while providing stronger drive than a direct source-to-load connection. Its two four-channel groups can be enabled independently, allowing one control group to remain active while another is disconnected. Since every channel is inverting, system logic must account for reversed control polarity. The 20-pin PDIP format also supports straightforward through-hole assembly and prototype rework compared with a fine-pitch surface-mount implementation.

⚙️

Industrial Digital Interface

The SN74AC240N fits low-voltage industrial control logic that requires buffered digital outputs and controlled bus connection. Its eight three-state channels provide flexibility for separating command, status, or inter-board signals, while the 2 V to 6 V range supports common low-voltage CMOS rails. The implementation must account for inverted logic and cannot rely on a disabled output to establish a valid high or low level. Firmware and hardware should ensure that output-enable outputs never allow conflicting devices to drive one bus simultaneously.

🔧

Test and Measurement Logic

The SN74AC240N can serve as a controllable signal-buffer element in test and measurement systems where selected outputs must drive fixtures while others remain disconnected. The two independently enabled output groups simplify segmented test-bus control, and the eight inverting channels provide consistent signal conditioning at a 2 V to 6 V supply. Inverting behavior must be included in the test-vector design. The output-enable timing and propagation delay should also be evaluated to ensure the selected group enters or leaves the drive state within the instrument's acquisition window.

خلاصه محصولات پیشنهادی

MC74AC240NG Pin-compatible octal AC240 address-buffer alternative استفاده‌شده در: Memory Address Buffering, Clock Signal Distribution, Shared Bus Isolation, Industrial Digital Interface, Test and Measurement Logic CD74AC240E Functionally comparable octal AC240 buffer استفاده‌شده در: Memory Address Buffering, Shared Bus Isolation, Control Signal Isolation, Industrial Digital Interface CD74AC240EE4 Octal AC240 clock-driver alternative استفاده‌شده در: Clock Signal Distribution, Control Signal Isolation, Test and Measurement Logic
What is the SN74AC240N?
The SN74AC240N is an eight-channel CMOS octal buffer and line driver with inverting three-state outputs. According to the Texas Instruments SN74AC240 product page, the device operates from 2 V to 6 V and is organized into two four-channel groups with separate output-enable controls. It is packaged in a 20-pin PDIP and is intended for memory-address driving, clock driving, and bus-oriented signal isolation.
What is the operating voltage range of SN74AC240N?
The SN74AC240N operates from 2 V to 6 V. The Texas Instruments product description identifies it as an eight-channel AC-series logic device with three-state outputs, making the SN74AC240N suitable for low-voltage CMOS systems operating within that supply range. Logic thresholds, timing, output current, and absolute maximum ratings should be checked in the manufacturer datasheet for the selected operating conditions.
Where can I download the SN74AC240N datasheet PDF?
The official SN74AC240 datasheet and supporting documentation are available from the Texas Instruments product page. Open the SN74AC240N ordering table and select the documentation link for the 20-pin PDIP package. The page is also linked from the component data on this page, and its orderable-parts table helps distinguish SN74AC240N from other package and temperature-grade options in the same device family.
Where can I find the SN74AC240N pinout?
The SN74AC240N pinout is shown in the Texas Instruments SN74AC240 datasheet under the pin-configuration and pin-functions information for the 20-pin PDIP package. Use that diagram to identify each data input, inverting output, and output-enable connection. The exact signal assignment should be taken directly from the manufacturer drawing rather than inferred from another octal-buffer package.
What can replace the SN74AC240N?
The MC74AC240NG is a candidate drop-in replacement because the comparison identifies the same octal buffer/line-driver function and a compatible PDIP package option. The CD74AC240E and CD74AC240EE4 are also identified as functionally comparable AC240 devices. Final substitution still requires checking the exact pin assignment, supply range, timing, output-enable polarity, and package dimensions against the manufacturer datasheets.
What is the best Motorola equivalent for SN74AC240N?
The MC74AC240NG is the closest Motorola-family candidate identified for the SN74AC240N because both are octal AC240 buffer/line-driver devices with three-state outputs. Confirm that the selected suffix uses the same 20-pin PDIP footprint and matches the required supply voltage and enable timing. The comparison page is a starting point, but the manufacturer pin and timing tables should govern the final qualification.
SN74AC240N vs MC74AC240NG — which is better for a bus interface?
Choose between the SN74AC240N and MC74AC240NG by comparing their exact timing, output-current, enable-polarity, and package specifications for the bus being designed. Both are identified as octal AC240 devices with eight inverting three-state outputs, so their core function is closely aligned. The SN74AC240N is the primary choice when its manufacturer qualification and documentation meet the product requirements.
SN74AC240N vs CD74AC240E — what is the difference?
The SN74AC240N and CD74AC240E both belong to the octal AC240 inverting-buffer family with three-state outputs, but supplier, qualification, and detailed operating parameters should be compared before interchange. The verified comparison identifies both as functionally comparable. Check the 20-pin PDIP pin assignment, 2 V to 6 V operating requirements, propagation delay, output current, and operating temperature range in each manufacturer datasheet.
When should I choose SN74AC240N over another AC240 device?
Choose the SN74AC240N when its Texas Instruments qualification, electrical limits, and 20-pin PDIP documentation match the design requirements. It is particularly suitable for eight inverting, three-state bus outputs with two independently controlled four-channel groups. Select another AC240 implementation only when that manufacturer's supply range, timing, enable behavior, qualification, or sourcing requirements offer a specific engineering benefit.
Is SN74AC240N suitable for a shared data bus?
Yes, the SN74AC240N is suitable for a shared data bus because its eight outputs support three-state operation and its two four-channel groups have separate output-enable controls. Independent enable control allows selected output groups to drive while the remaining groups disconnect. Because the outputs are inverting, downstream logic must account for reversed polarity and require suitable pull-up or pull-down arrangements on disabled nets.
Where to buy SN74AC240N online?
The SN74AC240N can be requested through the Request a Quote form on this page, where the exact package suffix, quantity, delivery requirements, and current commercial terms can be reviewed. The component is identified as an active Texas Instruments octal buffer/line driver in a 20-pin PDIP package. Use the request form to confirm current lead time, stock status, and any authorized-channel considerations for the production build.
What is the price of SN74AC240N?
The current commercial terms for the SN74AC240N should be confirmed through the Request a Quote form on this page. The request identifies the exact SN74AC240N ordering code, quantity, and delivery requirements, allowing the platform to return the appropriate quote. This avoids presenting a temporary listing value that may not reflect production volume, date, packaging, or current availability.
What is the lead time for SN74AC240N?
The current lead time for SN74AC240N should be requested through the Request a Quote form on this page. Include the required quantity, target delivery date, and whether multiple production builds are planned. Texas Instruments lists the device in a 20-pin PDIP configuration, but current manufacturing and inventory status should be confirmed for the specific order rather than assumed from historical catalog data.
Is SN74AC240N in stock?
Current SN74AC240N stock status should be confirmed through the Request a Quote form on this page. Include the quantity required for prototype, production, and maintenance builds so the response reflects the appropriate supply scope. The part is offered as an eight-channel, 2 V to 6 V AC CMOS inverter/buffer in a 20-pin PDIP package, but live stock can change by region and order quantity.
What are the key specifications of SN74AC240N that engineers should know?
The key SN74AC240N specifications are eight channels, inverting outputs, three-state operation, a 2 V to 6 V supply range, two independently controlled four-channel groups, and a 20-pin PDIP package. Texas Instruments describes the device as an octal buffer/line driver intended for memory-address, clock, and bus-oriented applications. Timing, current, and temperature limits should be taken from the manufacturer datasheet before release.

داده‌های مرجع مهندسی برای SN74AC240N — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the SN74AC240N when the design requires eight inverting CMOS outputs, three-state bus participation, two independently enabled four-channel groups, and a 2 V to 6 V supply in a 20-pin PDIP package. It is particularly appropriate for memory-address buffering, clock distribution, and shared-bus isolation where inverted signal polarity is acceptable or deliberately corrected. The MC74AC240NG is a cross-brand candidate for the same octal AC240 function, but its exact timing, current, qualification, and enable specifications must be compared with the SN74AC240N. The CD74AC240E and CD74AC240EE4 offer closely related Texas Instruments options in comparable PDIP configurations and should be selected when their detailed electrical and qualification attributes better fit the product requirements. No alternative should be released without checking pin functions, timing, logic thresholds, output current, absolute maximum ratings, and package dimensions.

مقایسه با جایگزین‌ها

پارامتر این محصول MC74AC240NG CD74AC240E CD74AC240EE4
Package 20-PDIP 20-PDIP 20-PDIP 20-PDIP
Brand Texas Instruments Motorola Texas Instruments Texas Instruments
Channel Count 8 channels 8 channels 8 channels 8 channels
Output Polarity Inverting Inverting Inverting Inverting
Output State Three-state Three-state Three-state Three-state
Output Group Organization Two groups of 4 channels Two groups of 4 channels Two groups of 4 channels Two groups of 4 channels
Output Enable Control Separate control for each 4-channel group Separate control for each 4-channel group Separate control for each 4-channel group Separate control for each 4-channel group
Technology Family AC CMOS AC CMOS AC CMOS AC CMOS

تفاوت‌های کلیدی

  • Provides two independently controlled groups within one octal package (در مقابلCD74AC240E)
  • Combines inverting three-state buffering with a 2 V to 6 V operating range (در مقابلMC74AC240NG)
  • Uses a readily handled 20-pin PDIP footprint (در مقابلCD74AC240EE4)

یادداشت‌های طراحی

Account for the inversion of every SN74AC240N data channel when defining control equations, address maps, or test vectors. Also distinguish an inactive output-enable input from a valid logic-low output: the disabled outputs enter a high-impedance state rather than actively driving a low level. Add suitable pull-up or pull-down resistors wherever a disabled shared-bus net must remain in a defined state.

Operate the SN74AC240N only within its 2 V to 6 V supply range and use a supply whose ground reference is common with every device connected to the same bus. Review the datasheet's input and output current limits before adding load capacitance or long interconnects. The component is a digital buffer rather than a power regulator, so supply decoupling and trace-current capacity should be handled by the board-level power design.

Place the logic source close to the relevant SN74AC240N input and keep the driven output path away from adjacent high-speed or switching nodes. Use a continuous ground-plane reference beneath the 20-pin PDIP footprint and avoid routing shared-bus traces beneath long power-conversion sections. Where multiple devices can connect to one net, review their physical proximity and enable-state sequencing to reduce simultaneous switching and contention risk.

Treat the two output-enable groups as independent bus-ownership controls and define their states during reset, power-up, and power-down. The system must prevent two drivers from actively opposing the same net. For long or lightly terminated lines, evaluate propagation delay, edge behavior, capacitive loading, and the receiver's threshold in the manufacturer datasheet before treating the buffered output as a guaranteed solution for high-speed communications.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The Texas Instruments product page identifies the SN74AC240 as a logic IC rather than an automotive-qualified device. Detailed RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations must be confirmed for the exact ordering code.

تاریخ تأیید داده‌ها: 2026-11-14 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

SN74AC240N datasheet SN74AC240N datasheet pdf SN74AC240N pinout SN74AC240N equivalent SN74AC240N replacement SN74AC240N vs MC74AC240NG SN74AC240N footprint SN74AC240N price SN74AC240N stock Texas Instruments SN74AC240N SN74AC240N application circuit SN74AC240 3-state buffer

قطعات و اصطلاحات مرتبط

Texas Instruments SN74AC240N SN74AC240 MC74AC240NG CD74AC240E CD74AC240EE4 octal buffer line driver three-state output inverting logic CMOS logic AC logic family logic IC digital bus memory address driver clock driver high-impedance state 20-PDIP through-hole package output-enable control 2 V to 6 V supply bus isolation Texas Instruments product page
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ