STMicroelectronics

STM32F042F6P6 - 48MHz Cortex-M0 32KB MCU | STMicroelectronics

MPN: STM32F042F6P6 ✓ فعال
2.5 V to 3.3 V Vdss 20-pin TSSOP Package 48 MHz Speed 32 KB (32K x 8) Memory
حداقل سفارش: 1 |

STM32F042F6P6 نمای کلی

The STMicroelectronics STM32F042F6P6 is a 32-bit ARM Cortex-M0 microcontroller in a 20-pin TSSOP package, operating at up to 48 MHz with 32 KB of Flash memory, USB, and CAN connectivity. The device is designed for compact embedded systems that require a fast Cortex-M0 core and dedicated USB or CAN communication without the resource demands of a larger microcontroller family. According to the manufacturer product page, the STM32F042x4/x6 series combines high-performance embedded processing with a rich peripheral set for cost-sensitive control, communications, and human-interface applications.

A microcontroller is a programmable system-on-chip that integrates a CPU core, Flash program memory, SRAM, peripherals, and communication interfaces onto one package. Within the product hierarchy, the STM32F042F6P6 is an ARM Cortex-M0 microcontroller, a 32-bit RISC device within the STM32F0 family, and a member of the broader embedded-processing and power-management ecosystem. Its 48 MHz operating frequency supports responsive control loops, while the USB and CAN peripherals provide dedicated paths for personal-computer connectivity and industrial or automotive network communication.

Key features include a 48 MHz ARM Cortex-M0 core, 32 KB of Flash memory, a 12-bit ADC, USB and CAN interfaces, and operation from 2.5 V to 3.3 V. The 20-pin TSSOP package measures 4.4 mm in body width and is intended for surface-mount assembly. The -40 °C to +85 °C temperature range supports industrial-temperature commercial equipment, although extended-temperature variants should be selected when wider environmental margins are required.

The STM32F0 architecture provides a practical balance between processing performance, peripheral integration, and low system complexity. Its 32-bit instruction set and dedicated communication blocks allow firmware consolidation when a design otherwise needs separate USB and CAN interface controllers. Peripheral multiplexing should be checked against the selected board configuration because assigning USB, CAN, timers, and general-purpose I/O can limit the number of simultaneously available port pins.

Typical applications include USB-connected control panels, CAN-connected sensor nodes, compact industrial controllers, USB-to-serial adapters, small human-interface products, and embedded systems that require a low-pin-count Cortex-M0 implementation. The MCU also suits compact actuator controllers and peripheral modules where a USB service interface simplifies configuration and firmware updates.

When laying out the board, place the decoupling capacitors beside the power pins, route the USB data lines as a controlled impedance pair, and keep the CAN transceiver interface away from sensitive analog paths. Confirm the exact peripheral-pin multiplexing, clock configuration, and pin electrical limits in the manufacturer datasheet before releasing the PCB layout.

جایگزین‌های drop-in برای STM32F042F6P6 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای STM32F042F6P6 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در ADC Resolution, USB Interface, Flash Memory, Package, CAN Interface.

STMicroelectronics
ADC Resolution: 12-bit and 15-bit
Flash Memory: 16 KB (16K x 8)
مقایسه با STM32F042F6P6 →
STMicroelectronics
ADC Resolution: 12-bit
USB Interface: Yes, USB device line
Flash Memory: 16 KB (16K x 8)
مقایسه با STM32F042F6P6 →
STMicroelectronics
USB Interface: USB
Package: 20-TSSOP
CAN Interface: CAN
مقایسه با STM32F042F6P6 →

STM32F042F6P7

✅ جایگزین مستقیم
STMicroelectronics
📦 20-pin TSSOP
ARM Cortex-M0 32-bit microcontroller · STM32F0 · STM32F042x4/x6 · ARM Cortex-M0 · 32 bit · 48 MHz · 32 KB (32K x 8)

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

STM32F042F6P6TR

✅ جایگزین مستقیم
📦 20-pin TSSOP
Same STM32F042F6P6 electrical configuration with identical 48 MHz core, 32 KB Flash, USB, and CAN; the TR suffix changes the order code and tape-and-reel delivery format rather than the device function

📋 جایگزین مرجع (خارج از کاتالوگ)

STM32F031F6P6

✅ جایگزین مستقیم
STMicroelectronics
📦 20-pin TSSOP
32-bit ARM Cortex-M0 microcontroller · 48 MHz · 32 KB · 32K x 8 bits · ARM Cortex-M0 32-bit RISC · 9 timers · Integrated analog-to-digital converter · 20-pin TSSOP, 4.40 mm body width

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

STM32F030F4P6

✅ جایگزین مستقیم
STMicroelectronics
📦 20-pin TSSOP
Arm Cortex-M0 32-bit RISC · 48 MHz · 16 KB (16K x 8) · 4 KB · 2.4 V to 3.6 V · Arm-based 32-bit RISC · 12-bit and 15-bit · 20-pin TSSOP

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

STM32F042F4P6

✅ جایگزین مستقیم
STMicroelectronics
📦 20-pin TSSOP
32-bit ARM Cortex-M0 microcontroller · ARM Cortex-M0 · 48 MHz · 16 KB (16K x 8) · 6 KB · 2.4 V to 3.6 V · -40 °C to +85 °C · Yes, USB device line

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

STM32F042F6P6 حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type 32-bit ARM Cortex-M0 microcontroller
CPU Core ARM Cortex-M0
Maximum CPU Frequency 48 MHz
Word Length 32 bit
Flash Memory 32 KB (32K x 8)
ADC Resolution 12 bit
USB Interface Yes
CAN Interface Yes
Operating Voltage 2.5 V to 3.3 V
دمای کاری -40 °C to +85 °C
بسته‌بندی 20-pin TSSOP
Package Body Width 4.40 mm
Package Length 0.173 inch (4.40 mm)
نوع نصب Surface mount
وضعیت RoHS Compliant
REACH Status Compliant
AEC-Q100 Qualification Not applicable
Lead-Free Status Yes

پیکربندی پین STM32F042F6P6

TSSOP-20 Package Pinout Diagram TSSOP-20 4.4x6.5mm, P0.65mm, JEDEC MO-153. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 TSSOP-20
پین 1 VBAT — Backup supply input
پین 2 PC14 — General-purpose I/O or oscillator pin
پین 3 PC15 — General-purpose I/O or oscillator pin
پین 4 NRST — Active-low reset input
پین 5 VDDA — Analog supply input
پین 6 PA0 — General-purpose I/O or analog input
پین 7 PA1 — General-purpose I/O or analog input
پین 8 PA2 — General-purpose I/O or alternate-function pin
پین 9 PA3 — General-purpose I/O or alternate-function pin
پین 10 PA4 — General-purpose I/O or analog input
پین 11 PA5 — General-purpose I/O or analog input
پین 12 PA6 — General-purpose I/O or alternate-function pin
پین 13 PA7 — General-purpose I/O or alternate-function pin
پین 14 PB1 — General-purpose I/O or alternate-function pin
پین 15 VSS — Ground
پین 16 VDD — Digital supply input
پین 17 PA9 — General-purpose I/O or USB alternate function
پین 18 PA10 — General-purpose I/O or USB alternate function
پین 19 PA13 — Debug or general-purpose I/O
پین 20 PA14 — Debug or general-purpose I/O

کاربردهای معمول

STM32F042F6P6 مناسب است برای 6 کاربردs: USB-Connected Control Panel, CAN-Based Sensor Node, Compact Industrial Controller, USB-to-Serial Adapter, Human Interface and Configuration Module, Compact Actuator Controller.

🔌

USB-Connected Control Panel

The STM32F042F6P6 suits a compact USB control panel because it combines a 48 MHz Cortex-M0 core with an integrated USB interface and 32 KB of Flash. Firmware can scan buttons, drive indicator LEDs, update a local display, and exchange configuration data with a host computer without a separate USB controller. The 20-pin TSSOP package also supports dense layouts where board area is constrained. Place the USB data pair on a controlled-impedance trace, provide the required series resistance, and separate the USB connector and protection network from sensitive analog routing. Validate enumeration behavior, bus-powered current limits, and suspend current in the final product configuration.

🌐

CAN-Based Sensor Node

The STM32F042F6P6 is appropriate for a compact CAN sensor node because it provides a 48 MHz ARM Cortex-M0 core, a 12-bit ADC, 32 KB of Flash, and a dedicated CAN interface. It can acquire analog sensor readings, apply filtering and calibration, and publish scaled measurements to a vehicle or industrial network. A separate CAN transceiver is still required to convert the MCU logic signals into differential bus voltage. Keep the transceiver and protection network away from precision analog inputs, use the datasheet-recommended termination arrangement, and validate timing with representative bus loading. Choose STM32F042F6P7 when an extended temperature range is required.

🏭

Compact Industrial Controller

The STM32F042F6P6 fits compact industrial controller roles that require deterministic embedded control, analog measurement, and both USB and CAN connectivity. Its 48 MHz Cortex-M0 core can execute control loops and communication tasks, while 32 KB of Flash provides space for application code and bootloader logic. The 20-pin TSSOP body width of 4.40 mm supports panel and module designs where connector spacing limits component size. Allocate pins for inputs, outputs, and analog channels only after reviewing alternate-function conflicts. Add an industrial connector, transient protection, and power supervision appropriate to the installation environment, and verify operation across the full -40 °C to +85 °C temperature range.

🖥️

USB-to-Serial Adapter

A USB-to-serial adapter can use the STM32F042F6P6 to bridge between a USB host and a serial peripheral while adding buffering, configuration storage, and status indication. Its 48 MHz Cortex-M0 performance provides ample headroom for protocol handling, and 32 KB of Flash is suitable for a compact USB stack and application firmware. The integrated USB peripheral reduces external component count compared with an MCU that lacks USB. Use a dedicated UART transceiver when the serial interface requires RS-232 signal levels, and ensure the USB descriptor supports the operating system and driver expectations of the target product. Provide a recovery path so a firmware fault does not permanently prevent USB enumeration.

🔧

Human Interface and Configuration Module

The STM32F042F6P6 can serve as the controller in a small human-interface module containing buttons, rotary encoders, status LEDs, and a USB service connection. At 48 MHz it can debounce inputs and update indicators while managing USB communication, while the 20-pin TSSOP package leaves board space for connectors and protection components. Use timer-based input scanning rather than blocking delays where response consistency matters, and debounce mechanically noisy switches in firmware. Keep high-current LED drivers and switch transients away from the MCU supply pins. A product that must operate above +85 °C should use the STM32F042F6P7 ordering option.

⚙️

Compact Actuator Controller

The STM32F042F6P6 can control a small actuator or electromechanical subsystem where logic, analog monitoring, and network diagnostics must share one controller. The 48 MHz Cortex-M0 core executes position or timing control, the 12-bit ADC monitors a feedback signal, and USB or CAN provides configuration and status reporting. Place transistor or MOSFET drive stages and their thermal copper away from the MCU and analog ground paths. Include flyback protection for inductive loads, verify current limits during startup, and use the MCU's communication interface for diagnostics rather than as the primary source of real-time motion control. The 32 KB Flash also permits logging fault codes and maintaining calibration parameters.

What are the key specifications of STM32F042F6P6 that engineers should know?
The STM32F042F6P6 combines a 48 MHz ARM Cortex-M0 core, 32 KB of Flash, a 12-bit ADC, USB, and CAN in a 20-pin TSSOP package. According to the STMicroelectronics STM32F042F6 product page, this device is positioned as a high-performance Cortex-M0 member of the STM32F0 series. Its 2.5 V to 3.3 V operating range and -40 °C to +85 °C temperature rating support compact, cost-sensitive embedded products that require dedicated USB or network communication.
What is the STM32F042F6P6 and what is it used for?
The STM32F042F6P6 is a 32-bit microcontroller built around an ARM Cortex-M0 core and optimized for embedded control and connectivity. STMicroelectronics identifies the STM32F042x4/x6 series as a high-performance Cortex-M0 family operating up to 48 MHz. Typical uses include USB-connected peripherals, CAN-connected control modules, compact industrial controllers, sensor interfaces, and small human-interface products where a 20-pin surface-mount package and low system complexity are important.
Where can I download the STM32F042F6P6 datasheet PDF?
The official STM32F042F6 datasheet is available through the STMicroelectronics product page listed on this page. The manufacturer product documentation provides the pin definitions, peripheral multiplexing, electrical characteristics, package drawings, and application guidance. Use the manufacturer document for final schematic and layout decisions, particularly the alternate-function mapping for USB, CAN, ADC channels, oscillators, and debug signals.
Where can I find the STM32F042F6P6 pinout?
The STM32F042F6P6 pinout is documented in the manufacturer datasheet and its package diagrams. The device uses a 20-pin TSSOP layout with power, ground, reset, oscillator, debug, communication, and general-purpose I/O functions. Use the pin-description table in the datasheet to confirm each signal because several peripheral functions share the same port pins through alternate-function multiplexing.
What is the STM32F042F6P6 schematic pin configuration?
A practical STM32F042F6P6 schematic starts with the 2.5 V to 3.3 V supply network, local supply decoupling, reset conditioning, and clock implementation, followed by the selected USB or CAN interfaces. The 20-pin TSSOP also carries debug and general-purpose I/O. Consult the pin-description and alternate-function tables in the manufacturer datasheet before assigning functions so that USB, CAN, timers, and analog inputs do not conflict.
Is the STM32F042F6P6 suitable for a USB development board?
Yes, the STM32F042F6P6 is suitable for a USB-connected development board because it integrates USB alongside a 48 MHz Cortex-M0 core and 32 KB of Flash. The USB interface allows the board to use a standard USB connection for power, programming, or communication. A production design still requires correct USB data-pair routing, controlled impedance, connector protection, and the appropriate voltage and decoupling network.
Can the STM32F042F6P6 be used in a CAN-based sensor node?
Yes, the STM32F042F6P6 can be used in a CAN-based sensor node because it includes a dedicated CAN interface and operates at up to 48 MHz. The MCU can sample sensors through its 12-bit ADC, filter the measurements, and publish them over the CAN network. Production hardware requires a separate CAN transceiver because the MCU CAN pins are logic-level signals rather than bus-level differential connections.
What is the difference between STM32F042F6P6 and STM32F031F6P6?
The STM32F042F6P6 provides USB and CAN interfaces, while the STM32F031F6P6 is positioned as a more basic STM32F0 option without the same communication feature set. Both use the STM32F0 architecture and are available in a compact 20-pin TSSOP configuration, but the USB and CAN requirement is the decisive functional distinction. Confirm the exact alternate-function map and unused-pin treatment in each part's manufacturer datasheet before substituting one board design for the other.
When should I choose STM32F042F6P6 instead of STM32F031F6P6?
Choose STM32F042F6P6 when the design requires integrated USB, CAN, or both. The additional dedicated communication hardware can reduce the need for external interface controllers and simplifies designs with a personal-computer connection or network bus. Choose STM32F031F6P6 only when those interfaces are unnecessary and the simpler STM32F0 implementation fully meets the control, analog, and I/O requirements of the product.
What can replace an STM32F042F6P6 on the same PCB?
The closest same-footprint candidates include the STM32F042F6P6TR temperature-ordering variant and the STM32F042F4P6 flash-size variant, but neither is a universal functional substitution. STM32F042F6P6TR keeps the 32 KB Flash configuration and changes the order code and delivery format, while STM32F042F4P6 reduces Flash capacity. Before replacing any part, verify peripheral availability, pin multiplexing, firmware memory assumptions, and the exact package and ordering configuration in the manufacturer documentation.
Is STM32F031F6P6 a drop-in replacement for STM32F042F6P6?
STM32F031F6P6 is not a complete drop-in replacement for STM32F042F6P6 when USB or CAN is required. Although it belongs to the STM32F0 family and uses a comparable low-pin-count package, the STM32F042F6P6 provides the dedicated USB and CAN peripherals identified in the manufacturer product data. A board swap should therefore be treated as a redesign unless the original schematic does not use those communication blocks and all pin-level requirements have been verified.
What is the best GigaDevice equivalent for STM32F042F6P6?
No verified GigaDevice drop-in equivalent for the STM32F042F6P6 is established by the available cross-reference information. The STM32F042F6P6 combines a specific Cortex-M0 configuration, 32 KB Flash, USB, CAN, 20-pin TSSOP footprint, and alternate-function map that must all be matched. Treat any second-source MCU as a board-level redesign until pin, peripheral, electrical, clock, and firmware compatibility have been independently validated.
Is STM32F042F6P6 in stock and what is its lead time?
The STM32F042F6P6 is shown as available in current distributor listings, and one listing reports 35,520 pieces in stock. Lead time and available quantity can change by region, purchasing volume, and supplier, so request the current allocation through the Request a Quote form on this page. Do not build a production schedule from cached inventory alone; confirm the exact order code, tube packaging, and delivery commitment before releasing a purchase order.
Where can I buy STM32F042F6P6 online and what does it cost?
Use the Request a Quote form on this page to buy STM32F042F6P6 and obtain current commercial terms for the exact tube-packaged order code. The verified listings include distributor stock records and unit-price references, but market pricing changes daily and may differ by volume and purchasing channel. The quote form is the appropriate route for current price, minimum order quantity, lead time, and shipment confirmation.
What is the lead time for STM32F042F6P6?
A current, guaranteed lead time for STM32F042F6P6 should be confirmed through the Request a Quote form on this page. Available distributor records describe the part as immediately shippable in some quantities, but lead time varies with order volume, packaging format, destination, and supplier inventory at the time of purchase. Provide your required quantity and tube-packaging preference with the request to receive a current schedule.
How do I choose between STM32F042F6P6 and STM32F042F4P6?
Choose STM32F042F6P6 when firmware capacity is important because it provides 32 KB of Flash, while STM32F042F4P6 provides 16 KB. The smaller-flash STM32F042F4P6 may reduce bill-of-material cost when the application and boot code fit comfortably within 16 KB. The decision should also include SRAM requirements, peripheral usage, firmware update strategy, and the minimum headroom needed for future code growth.

داده‌های مرجع مهندسی برای STM32F042F6P6 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose STM32F042F6P6 when a compact design needs a 48 MHz Cortex-M0 core, 32 KB of Flash, and integrated USB and CAN in a 20-pin TSSOP package. Choose STM32F042F6P7 when the same electrical configuration is needed above +85 °C, up to the +105 °C grade. Choose STM32F042F4P6 when the board does not need USB or CAN and its firmware is certain to fit within 16 KB; STM32F030F4P6 is a lower-cost option for simpler control tasks without either communication interface. STM32F031F6P6 is appropriate when the STM32F0 core and package are sufficient but USB and CAN are not required. For every proposed substitution, verify the exact alternate-function map, exposed pin use, clock configuration, bootloader assumptions, and temperature grade. The STM32F042F6P6TR shares the target device's functional configuration but changes the order code and delivery format, so procurement teams should select the suffix that matches their incoming inspection and assembly process.

مقایسه با جایگزین‌ها

پارامتر این محصول STM32F042F6P7 STM32F042F6P6TR STM32F031F6P6 STM32F030F4P6 STM32F042F4P6
Package 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
CPU Core ARM Cortex-M0 ARM Cortex-M0 ARM Cortex-M0 ARM Cortex-M0 ARM Cortex-M0 ARM Cortex-M0
Maximum Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz
Flash Memory 32 KB 32 KB 32 KB 32 KB 16 KB 16 KB
USB Interface Yes Yes Yes No No Yes
CAN Interface Yes Yes Yes No No Yes
ADC Resolution 12 bit 12 bit 12 bit 12 bit 12 bit 12 bit
Operating Voltage 2.5 V to 3.3 V 2.5 V to 3.3 V 2.5 V to 3.3 V 2.5 V to 3.3 V 2.5 V to 3.3 V 2.5 V to 3.3 V
Temperature Range -40 °C to +85 °C -40 °C to +105 °C -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C

تفاوت‌های کلیدی

  • Provides both USB and CAN in a 20-pin TSSOP microcontroller (در مقابلSTM32F031F6P6)
  • Doubles available Flash relative to the 16 KB STM32F0 options (در مقابلSTM32F030F4P6)
  • Maintains USB, CAN, and 48 MHz operation in the smaller-flash STM32F042 variant (در مقابلSTM32F042F4P6)
  • Offers an extended-temperature same-family configuration (در مقابلSTM32F042F6P6)

یادداشت‌های طراحی

Place the required supply and analog-decoupling capacitors immediately beside the corresponding VDDA and VDD pins, with the shortest possible ground return. The STM32F042F6P6 operates from 2.5 V to 3.3 V, so confirm the voltage tolerance of every connected peripheral before sharing the rail. Keep regulator switching loops and USB connector surge-current paths away from the analog input area, and follow the decoupling and layout recommendations in the manufacturer datasheet.

Route USB D+ and D- as a short, coupled pair with a continuous reference plane and the interface layout prescribed in the manufacturer application guidance. A USB-connected product can be sensitive to impedance discontinuity, stubs, and ESD-event current. Place low-capacitance protection devices close to the connector and keep them off the data-pair path. Validate the completed layout with USB compliance and signal-integrity testing rather than relying only on schematic continuity.

Assign USB, CAN, ADC, debug, and general-purpose functions only after reviewing the alternate-function matrix in the STM32F042x4/x6 datasheet. In particular, PA9 and PA10 are commonly associated with USB, and several analog or peripheral inputs share I/O pins. Route the CAN RX and TX signals to the external transceiver rather than to a differential bus directly, and keep the transceiver and protection components near the connector while the MCU remains isolated from high-voltage edges.

Do not treat the STM32F031F6P6 as an unconditional substitute when USB or CAN is used, and do not select the 16 KB Flash variants without reviewing the boot code, application size, and update mechanism. The F042F6P6 and F042F6P6TR retain the same functional configuration but use different delivery formats. Check the complete order code, tube or tape-and-reel requirement, temperature grade, and pin multiplexing before authorizing a substitution.

اطلاعات انطباق

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
بدون سرب
Yes
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

RoHS and REACH compliance are identified in the STM32F042F6P6 versus STM32F031F6P6 comparison data. The component is a general-purpose commercial and industrial-temperature microcontroller rather than an AEC-Q100-qualified automotive device.

تاریخ تأیید داده‌ها: 2026-11-15 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

STM32F042F6P6 schematic STM32F042F6P6 development board STM32F042F6P6 board STM32F042F6P6 mcu klipper expander STM32F042F6P6 usb STM32F042F6P6 datasheet STM32F042F6P6 datasheet pdf STM32F042F6P6 pinout STM32F042F6P6 equivalent STM32F042F6P6 replacement STM32F042F6P6 vs STM32F031F6P6 STM32F042F6P6 footprint STM32F042F6P6 price STM32F042F6P6 stock STMicroelectronics STM32F042F6P6

قطعات و اصطلاحات مرتبط

STMicroelectronics STM32F042F6P6 STM32F042x4/x6 ARM Cortex-M0 32-bit RISC core microcontroller embedded processor 32 KB Flash 12-bit ADC USB CAN STM32F0 series 20-pin TSSOP TSSOP package family surface mount 48 MHz 2.5 V to 3.3 V RoHS REACH industrial control USB control panel CAN sensor node USB-to-serial adapter
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ