STM32F042F6P6 - 48MHz Cortex-M0 32KB MCU | STMicroelectronics
部品番号: STM32F042F6P6 ✓ 生産中STM32F042F6P6 概要
A microcontroller is a programmable system-on-chip that integrates a CPU core, Flash program memory, SRAM, peripherals, and communication interfaces onto one package. Within the product hierarchy, the STM32F042F6P6 is an ARM Cortex-M0 microcontroller, a 32-bit RISC device within the STM32F0 family, and a member of the broader embedded-processing and power-management ecosystem. Its 48 MHz operating frequency supports responsive control loops, while the USB and CAN peripherals provide dedicated paths for personal-computer connectivity and industrial or automotive network communication.
Key features include a 48 MHz ARM Cortex-M0 core, 32 KB of Flash memory, a 12-bit ADC, USB and CAN interfaces, and operation from 2.5 V to 3.3 V. The 20-pin TSSOP package measures 4.4 mm in body width and is intended for surface-mount assembly. The -40 °C to +85 °C temperature range supports industrial-temperature commercial equipment, although extended-temperature variants should be selected when wider environmental margins are required.
The STM32F0 architecture provides a practical balance between processing performance, peripheral integration, and low system complexity. Its 32-bit instruction set and dedicated communication blocks allow firmware consolidation when a design otherwise needs separate USB and CAN interface controllers. Peripheral multiplexing should be checked against the selected board configuration because assigning USB, CAN, timers, and general-purpose I/O can limit the number of simultaneously available port pins.
Typical applications include USB-connected control panels, CAN-connected sensor nodes, compact industrial controllers, USB-to-serial adapters, small human-interface products, and embedded systems that require a low-pin-count Cortex-M0 implementation. The MCU also suits compact actuator controllers and peripheral modules where a USB service interface simplifies configuration and firmware updates.
When laying out the board, place the decoupling capacitors beside the power pins, route the USB data lines as a controlled impedance pair, and keep the CAN transceiver interface away from sensitive analog paths. Confirm the exact peripheral-pin multiplexing, clock configuration, and pin electrical limits in the manufacturer datasheet before releasing the PCB layout.
ドロップイン代替品: STM32F042F6P6 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: STM32F042F6P6 (同一形状・フットプリント) — 相違点: ADC Resolution, USB Interface, Flash Memory, Package, CAN Interface.
STM32F042F6P7
✅ ドロップイン価格はお問い合わせください
データシートを見る →STM32F042F6P6TR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
STM32F031F6P6
✅ ドロップイン価格はお問い合わせください
データシートを見る →STM32F030F4P6
✅ ドロップイン価格はお問い合わせください
データシートを見る →STM32F042F4P6
✅ ドロップイン価格はお問い合わせください
データシートを見る →STM32F042F6P6 最大定格&電気的特性
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| CPU Core | ARM Cortex-M0 |
| Maximum CPU Frequency | 48 MHz |
| Word Length | 32 bit |
| Flash Memory | 32 KB (32K x 8) |
| ADC Resolution | 12 bit |
| USB Interface | Yes |
| CAN Interface | Yes |
| Operating Voltage | 2.5 V to 3.3 V |
| 動作温度 | -40 °C to +85 °C |
| パッケージ | 20-pin TSSOP |
| Package Body Width | 4.40 mm |
| Package Length | 0.173 inch (4.40 mm) |
| 実装タイプ | Surface mount |
| RoHS ステータス | Compliant |
| REACH Status | Compliant |
| AEC-Q100 Qualification | Not applicable |
| Lead-Free Status | Yes |
STM32F042F6P6 ピン構成
| ピン 1 | VBAT — Backup supply input |
| ピン 2 | PC14 — General-purpose I/O or oscillator pin |
| ピン 3 | PC15 — General-purpose I/O or oscillator pin |
| ピン 4 | NRST — Active-low reset input |
| ピン 5 | VDDA — Analog supply input |
| ピン 6 | PA0 — General-purpose I/O or analog input |
| ピン 7 | PA1 — General-purpose I/O or analog input |
| ピン 8 | PA2 — General-purpose I/O or alternate-function pin |
| ピン 9 | PA3 — General-purpose I/O or alternate-function pin |
| ピン 10 | PA4 — General-purpose I/O or analog input |
| ピン 11 | PA5 — General-purpose I/O or analog input |
| ピン 12 | PA6 — General-purpose I/O or alternate-function pin |
| ピン 13 | PA7 — General-purpose I/O or alternate-function pin |
| ピン 14 | PB1 — General-purpose I/O or alternate-function pin |
| ピン 15 | VSS — Ground |
| ピン 16 | VDD — Digital supply input |
| ピン 17 | PA9 — General-purpose I/O or USB alternate function |
| ピン 18 | PA10 — General-purpose I/O or USB alternate function |
| ピン 19 | PA13 — Debug or general-purpose I/O |
| ピン 20 | PA14 — Debug or general-purpose I/O |
主な用途
STM32F042F6P6 の用途: 6 件s: USB-Connected Control Panel, CAN-Based Sensor Node, Compact Industrial Controller, USB-to-Serial Adapter, Human Interface and Configuration Module, Compact Actuator Controller.
USB-Connected Control Panel
The STM32F042F6P6 suits a compact USB control panel because it combines a 48 MHz Cortex-M0 core with an integrated USB interface and 32 KB of Flash. Firmware can scan buttons, drive indicator LEDs, update a local display, and exchange configuration data with a host computer without a separate USB controller. The 20-pin TSSOP package also supports dense layouts where board area is constrained. Place the USB data pair on a controlled-impedance trace, provide the required series resistance, and separate the USB connector and protection network from sensitive analog routing. Validate enumeration behavior, bus-powered current limits, and suspend current in the final product configuration.
おすすめ
CAN-Based Sensor Node
The STM32F042F6P6 is appropriate for a compact CAN sensor node because it provides a 48 MHz ARM Cortex-M0 core, a 12-bit ADC, 32 KB of Flash, and a dedicated CAN interface. It can acquire analog sensor readings, apply filtering and calibration, and publish scaled measurements to a vehicle or industrial network. A separate CAN transceiver is still required to convert the MCU logic signals into differential bus voltage. Keep the transceiver and protection network away from precision analog inputs, use the datasheet-recommended termination arrangement, and validate timing with representative bus loading. Choose STM32F042F6P7 when an extended temperature range is required.
おすすめ
Compact Industrial Controller
The STM32F042F6P6 fits compact industrial controller roles that require deterministic embedded control, analog measurement, and both USB and CAN connectivity. Its 48 MHz Cortex-M0 core can execute control loops and communication tasks, while 32 KB of Flash provides space for application code and bootloader logic. The 20-pin TSSOP body width of 4.40 mm supports panel and module designs where connector spacing limits component size. Allocate pins for inputs, outputs, and analog channels only after reviewing alternate-function conflicts. Add an industrial connector, transient protection, and power supervision appropriate to the installation environment, and verify operation across the full -40 °C to +85 °C temperature range.
おすすめ
USB-to-Serial Adapter
A USB-to-serial adapter can use the STM32F042F6P6 to bridge between a USB host and a serial peripheral while adding buffering, configuration storage, and status indication. Its 48 MHz Cortex-M0 performance provides ample headroom for protocol handling, and 32 KB of Flash is suitable for a compact USB stack and application firmware. The integrated USB peripheral reduces external component count compared with an MCU that lacks USB. Use a dedicated UART transceiver when the serial interface requires RS-232 signal levels, and ensure the USB descriptor supports the operating system and driver expectations of the target product. Provide a recovery path so a firmware fault does not permanently prevent USB enumeration.
おすすめ
Human Interface and Configuration Module
The STM32F042F6P6 can serve as the controller in a small human-interface module containing buttons, rotary encoders, status LEDs, and a USB service connection. At 48 MHz it can debounce inputs and update indicators while managing USB communication, while the 20-pin TSSOP package leaves board space for connectors and protection components. Use timer-based input scanning rather than blocking delays where response consistency matters, and debounce mechanically noisy switches in firmware. Keep high-current LED drivers and switch transients away from the MCU supply pins. A product that must operate above +85 °C should use the STM32F042F6P7 ordering option.
おすすめ
Compact Actuator Controller
The STM32F042F6P6 can control a small actuator or electromechanical subsystem where logic, analog monitoring, and network diagnostics must share one controller. The 48 MHz Cortex-M0 core executes position or timing control, the 12-bit ADC monitors a feedback signal, and USB or CAN provides configuration and status reporting. Place transistor or MOSFET drive stages and their thermal copper away from the MCU and analog ground paths. Include flyback protection for inductive loads, verify current limits during startup, and use the MCU's communication interface for diagnostics rather than as the primary source of real-time motion control. The 32 KB Flash also permits logging fault codes and maintaining calibration parameters.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STM32F042F6P6 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | STM32F042F6P7 | STM32F042F6P6TR | STM32F031F6P6 | STM32F030F4P6 | STM32F042F4P6 |
|---|---|---|---|---|---|---|
| Package | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 |
| Maximum Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 32 KB | 32 KB | 32 KB | 32 KB | 16 KB | 16 KB |
| USB Interface | Yes | Yes | Yes | No | No | Yes |
| CAN Interface | Yes | Yes | Yes | No | No | Yes |
| ADC Resolution | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit |
| Operating Voltage | 2.5 V to 3.3 V | 2.5 V to 3.3 V | 2.5 V to 3.3 V | 2.5 V to 3.3 V | 2.5 V to 3.3 V | 2.5 V to 3.3 V |
| Temperature Range | -40 °C to +85 °C | -40 °C to +105 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
主な差別化要因
- Provides both USB and CAN in a 20-pin TSSOP microcontroller (vs STM32F031F6P6)
- Doubles available Flash relative to the 16 KB STM32F0 options (vs STM32F030F4P6)
- Maintains USB, CAN, and 48 MHz operation in the smaller-flash STM32F042 variant (vs STM32F042F4P6)
- Offers an extended-temperature same-family configuration (vs STM32F042F6P6)
設計ノート
Place the required supply and analog-decoupling capacitors immediately beside the corresponding VDDA and VDD pins, with the shortest possible ground return. The STM32F042F6P6 operates from 2.5 V to 3.3 V, so confirm the voltage tolerance of every connected peripheral before sharing the rail. Keep regulator switching loops and USB connector surge-current paths away from the analog input area, and follow the decoupling and layout recommendations in the manufacturer datasheet.
Route USB D+ and D- as a short, coupled pair with a continuous reference plane and the interface layout prescribed in the manufacturer application guidance. A USB-connected product can be sensitive to impedance discontinuity, stubs, and ESD-event current. Place low-capacitance protection devices close to the connector and keep them off the data-pair path. Validate the completed layout with USB compliance and signal-integrity testing rather than relying only on schematic continuity.
Assign USB, CAN, ADC, debug, and general-purpose functions only after reviewing the alternate-function matrix in the STM32F042x4/x6 datasheet. In particular, PA9 and PA10 are commonly associated with USB, and several analog or peripheral inputs share I/O pins. Route the CAN RX and TX signals to the external transceiver rather than to a differential bus directly, and keep the transceiver and protection components near the connector while the MCU remains isolated from high-voltage edges.
Do not treat the STM32F031F6P6 as an unconditional substitute when USB or CAN is used, and do not select the 16 KB Flash variants without reviewing the boot code, application size, and update mechanism. The F042F6P6 and F042F6P6TR retain the same functional configuration but use different delivery formats. Check the complete order code, tube or tape-and-reel requirement, temperature grade, and pin multiplexing before authorizing a substitution.
コンプライアンス情報
RoHS and REACH compliance are identified in the STM32F042F6P6 versus STM32F031F6P6 comparison data. The component is a general-purpose commercial and industrial-temperature microcontroller rather than an AEC-Q100-qualified automotive device.