Texas Instruments

THS3115ID - 110 MHz Dual Current-Feedback Amplifier | Texas Instruments

MPN: THS3115ID ✓ فعال
2.9 pA/√Hz Id 14-pin SOIC (D), 3.90 mm width Package
حداقل سفارش: 1 |

THS3115ID نمای کلی

The Texas Instruments THS3115ID is a dual, low-noise, high-output-current current-feedback amplifier with a 110 MHz bandwidth, supplied in a 14-pin SOIC package. Each channel supports shutdown, and the device is intended for signal paths that combine high bandwidth, low noise, and strong output-current capability. The THS3115ID also operates across an extended temperature range of -40°C to +85°C.

A current-feedback amplifier, or CFA, is a voltage-feedback amplifier architecture that uses feedback impedance to set gain and can maintain bandwidth more effectively than a conventional voltage-feedback amplifier across a wide gain range. In the broader electronics hierarchy, the THS3115ID is an operational amplifier, an analog signal-conditioning IC, and a semiconductor used in communication equipment, video distribution systems, motor drivers, and piezo drivers.

Each amplifier channel features low noninverting current noise of 2.9 pA/√Hz and low inverting current noise of 10.8 pA/√Hz. These current-noise levels are particularly useful when working with photodetectors, transducers, and other high-impedance sources because they limit the input-referred noise contributed by the amplifier. The 110 MHz bandwidth supports rapid signal transitions, while the high-output-current architecture is designed for loads requiring substantially greater drive than a conventional small-signal amplifier.

The THS3115 family also includes a low-power shutdown function that consumes only 300 µA of shutdown quiescent current per channel. Shutdown can reduce system consumption when an active signal path is not required, although timing, logic levels, and signal settling must be checked in the final application. Because a current-feedback amplifier does not follow the gain-versus-frequency behavior of a conventional voltage-feedback amplifier, its feedback resistor value is central to gain control and stability.

Typical uses include communication equipment, video distribution, motor drivers, and piezo drivers. The high-current output capability is particularly relevant when driving capacitive inputs such as coaxial cables, while the low-noise architecture benefits instrumentation and high-resolution signal chains. These applications also require careful attention to feedback networks, output-stage stability, power-supply bypassing, and grounding.

For a new design, begin with the manufacturer's recommended feedback resistor values for the intended gain and load, then verify stability with the actual source impedance, cable capacitance, and supply layout. Place bypass capacitors close to the supply pins and avoid long traces between the amplifier and sensitive input nodes. A PCB with a solid ground return and short feedback paths is especially important when operating near the device's 110 MHz bandwidth.

This product page consolidates the confirmed device characteristics, application guidance, package information, and available drop-in alternatives into an engineering-focused reference. It also identifies the data that still requires confirmation from the manufacturer datasheet, helping designers distinguish published facts from items that must be checked during component selection and board validation.

جایگزین‌های drop-in برای THS3115ID — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای THS3115ID (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Amplifier Type, Shutdown Function.

Texas Instruments
Package: 8-SOIC, 0.154 inch (3.90 mm) body width
Amplifier Type: Dual current-feedback amplifier
مقایسه با THS3115ID →
Texas Instruments
Package: 14-SOIC
Shutdown Function: Yes
مقایسه با THS3115ID →

THS3115CDRG4

✅ جایگزین مستقیم
📦 14-pin SOIC (D)
Same THS3115 dual current-feedback family and 14-pin SOIC construction; published comparison states complete replacement with consistent terminals and principal performance characteristics.

📋 جایگزین مرجع (خارج از کاتالوگ)

THS3112ID

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Texas Instruments
📦 14-pin SOIC (D)
Dual current-feedback amplifier · 2 circuits · 110 MHz · 2.9 pA/√Hz · 10.8 pA/√Hz · High output current · Current feedback · 8-SOIC, 0.154 inch (3.90 mm) body width

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

THS3112CDRG4

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 14-pin SOIC (D)
Same manufacturer, dual current-feedback amplifier family, and 14-pin SOIC footprint; gain-bandwidth, shutdown, and exact ordering-suffix differences require confirmation before substitution.

📋 جایگزین مرجع (خارج از کاتالوگ)

THS3115ID حداکثر مقادیر مجاز و مشخصات الکتریکی

Amplifier Type Current-feedback operational amplifier
Number of Channels 2 channels
Gain-Bandwidth Product 110 MHz
Noninverting Input Current Noise 2.9 pA/√Hz
Inverting Input Current Noise 10.8 pA/√Hz
Shutdown Quiescent Current 300 µA per channel
Shutdown Function Yes, low-power shutdown
بسته‌بندی 14-pin SOIC (D), 3.90 mm width
محدوده دمای کاری -40°C to +85°C
نوع نصب Surface mount

راهنمای پیکربندی پین THS3115ID 14-pin soic (d), 3.90 mm width

پیکربندی پین برای THS3115ID (پکیج 14-pin soic (d), 3.90 mm width). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 14-pin soic (d), 3.90 mm width برای THS3115ID

داده پین‌آوت تفصیلی موجود نیست برای THS3115ID.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

THS3115ID مناسب است برای 6 کاربردs: Video Distribution, Motor Driver Signal Stage, Piezo Driver Interface, Communication Equipment, Low-Noise Instrumentation, General-Purpose High-Speed Buffer.

📺

Video Distribution

The THS3115ID fits dual-channel video distribution because each channel provides a 110 MHz bandwidth and the family is specifically intended for high-output-current drive. The high-current capability helps retain signal integrity when driving terminated cables or other capacitive loads, while the dual configuration reduces the component count for two video channels. The 14-pin SOIC package is practical for conventional surface-mounted analog boards. During implementation, place the amplifier close to the source and load, keep feedback traces short, and include local supply bypassing. Cable capacitance, source impedance, and the required gain must be checked against the manufacturer stability guidance because high-speed current-feedback amplifiers can be sensitive to load and layout details.

🏭

Motor Driver Signal Stage

For motor-driver signal conditioning, the THS3115ID combines a 110 MHz bandwidth with the high-output-current capability highlighted for the THS3115 family. These characteristics are useful when the amplifier must preserve fast control edges while driving transistor input networks, gate-driver stages, or other relatively demanding loads. The dual-channel arrangement supports independent motor-control or feedback paths in one package. Design work should verify output swing, current limit, supply range, and capacitive loading in the exact gate-driver topology. Keep feedback loops compact, use a low-inductance ground return, and avoid long high-frequency traces that could increase ringing or reduce stability margin.

🔧

Piezo Driver Interface

The THS3115ID is suitable for the input stage of a piezo-driver circuit because its 110 MHz bandwidth supports rapid control signals and its high output current can provide stronger drive than a conventional small-signal amplifier. The dual format can handle a drive channel and a monitoring or feedback channel when the system architecture requires matched devices. Piezo loads are capacitive and frequency dependent, so the output stage must be checked for stability, peak current, and thermal load. Keep the amplifier-to-driver path short, use a ground plane with minimal return impedance, and evaluate the complete output network rather than treating the amplifier as an isolated voltage source.

🌐

Communication Equipment

The THS3115ID suits communication-equipment signal paths where low current noise, wide bandwidth, and high output drive are required. Its noninverting current noise of 2.9 pA/√Hz and inverting current noise of 10.8 pA/√Hz are valuable in source-impedance-sensitive receiver or transmitter interfaces. The dual 14-pin SOIC device provides two channels while keeping the footprint compact. Exact gain-bandwidth behavior depends on the current-feedback resistor selection, so use the manufacturer's recommended values rather than applying a conventional voltage-feedback gain formula. Keep input and feedback nodes compact, provide local supply bypass capacitance, and evaluate the design with the actual source impedance and cable loading.

💊

Low-Noise Instrumentation

The THS3115ID can serve as a low-noise instrumentation amplifier in circuits that need to preserve small current signals from high-impedance sensors, transducers, or photodetectors. Its specified current-noise levels of 2.9 pA/√Hz and 10.8 pA/√Hz reduce amplifier-added input current noise, while the 110 MHz bandwidth provides headroom for filtering and signal shaping below that frequency. The shutdown capability can reduce consumption when measurement channels are inactive. Choose feedback resistors and noise-filtering networks according to the manufacturer guidance, maintain high-impedance leakage control on the PCB, and include sufficient input filtering to prevent wideband noise from reducing the usable measurement resolution.

🖥️

General-Purpose High-Speed Buffer

The THS3115ID also functions as a high-speed buffer for test, measurement, and signal-conditioning systems requiring more output drive than a conventional small-signal amplifier. The 110 MHz bandwidth supports higher-frequency waveforms, and the dual configuration permits two independent buffered channels in one 14-pin SOIC package. When using either channel as a follower, verify the exact follower stability, output-current, and capacitive-load limits from the manufacturer documentation. Preserve short feedback paths, avoid placing large capacitors directly at the output unless the load is characterized, and use a continuous ground plane. The shutdown function can reduce power use when a test channel is not required, subject to the documented control timing.

What is the operating voltage of THS3115ID?
The THS3115ID is a dual current-feedback amplifier, but its exact supply-voltage limits must be confirmed from the manufacturer datasheet before power-supply selection. The Texas Instruments product page identifies the THS3115 family as a 110 MHz low-noise, high-output-current amplifier with shutdown. Use the device-specific recommended operating conditions and absolute-maximum ratings in the THS3115 documentation rather than assuming a conventional amplifier supply range.
What are the key specifications of THS3115ID that engineers should know?
The THS3115ID provides two amplifier channels, a 110 MHz bandwidth, low current noise, a shutdown function, and a 14-pin SOIC package. According to the Texas Instruments THS3115 product information, the noninverting input current noise is 2.9 pA/√Hz, the inverting input current noise is 10.8 pA/√Hz, and shutdown quiescent current is 300 µA per channel. The operating temperature range is -40°C to +85°C.
Where can I download the THS3115ID datasheet PDF?
The official THS3115 product page is the best starting point for the THS3115ID datasheet and ordering information. Texas Instruments describes the device as a dual, low-noise, high-output-current, 110 MHz amplifier with shutdown. Open the product page, select the THS3115ID ordering table, and use the linked technical documentation so the pin description, electrical characteristics, and recommended application circuit match the exact device.
Where can I find the THS3115ID pinout?
Use the pin-description table in the manufacturer THS3115 documentation to identify the 14 connections in the SOIC package. The THS3115ID is a dual current-feedback amplifier with shutdown, so both channels and their shutdown-control connections must be mapped correctly. The package diagram should be checked against the exact orderable part because exposed-pad versions of the THS3112 and THS3115 families use different package constructions.
Is THS3115ID suitable for video signal chains?
Yes, the THS3115ID is suitable for video distribution because it combines a 110 MHz bandwidth with high output-current capability. Texas Instruments lists video distribution as a typical application for the THS3115 family. The dual configuration supports two channels in one 14-pin SOIC package, while low current noise can help preserve signal integrity in source-impedance-sensitive paths. Cable capacitance and output stability still require simulation or bench validation.
Can THS3115ID drive motor and piezo loads?
The THS3115ID can be used for motor-driver and piezo-driver front ends because the THS3115 family is specifically characterized for high output current. Its 110 MHz bandwidth preserves fast signal content, and the dual-channel configuration allows complementary or independent drive functions. The load capacitance, output-current limit, supply voltage, and thermal dissipation must be checked against the manufacturer electrical characteristics before connecting the output stage.
What is the best drop-in replacement for THS3115ID?
THS3115CDRG4 is the strongest confirmed replacement candidate because a published comparison states that it is completely replaceable and that its terminals, package, and principal performance characteristics are consistent. Both devices belong to the Texas Instruments THS3115 family and use a 14-pin SOIC construction. Confirm the exact ordering suffix and mechanical drawing before production use, especially if reel packaging or temperature-grade markings differ.
What can replace THS3115ID on the same PCB?
THS3115CDRG4 is a candidate for a same-PCB replacement because the published comparison describes its package and terminals as consistent with THS3115ID and identifies it as a complete replacement. The device remains in the Texas Instruments THS3115 family and retains the dual current-feedback topology. Review supply limits, shutdown behavior, exact feedback recommendations, and production ordering requirements before approving the substitution.
Is THS3115ID the same as THS3115CDRG4?
THS3115ID and THS3115CDRG4 are closely related members of the Texas Instruments THS3115 dual current-feedback amplifier family. A published device comparison describes THS3115CDRG4 as a complete replacement with consistent package, terminals, and main performance characteristics. Orderable suffixes can still encode packaging or grade differences, so the manufacturer part-details page should be checked before treating the two markings as fully interchangeable.
When should I choose THS3115ID over another THS3115-family option?
Choose THS3115ID when the design specifically requires the 14-pin SOIC ordering option, the -40°C to +85°C temperature range, and the confirmed THS3115 low-noise, 110 MHz performance. It is appropriate for dual-channel communication, video-distribution, motor-driver, or piezo-driver signal paths. If another family member offers an equivalent footprint but different packaging, grade, or ordering suffix, select it only after checking those differences against the production requirements.
Is THS3115ID suitable for a low-noise instrumentation design?
The THS3115ID is suitable for many instrumentation front ends because its noninverting input current noise is 2.9 pA/√Hz and its inverting input current noise is 10.8 pA/√Hz. Those figures are especially relevant with high-impedance sensors and photodetectors. Actual system noise also depends on source impedance, resistor selection, bandwidth, supply noise, and PCB leakage, so an end-to-end noise calculation remains necessary.
How much power does the THS3115ID consume in shutdown?
The THS3115 family uses a low-power shutdown mode consuming 300 µA of shutdown quiescent current per channel, according to the Texas Instruments product page. This makes shutdown useful for reducing consumption in portable, communication, and intermittently active systems. Confirm the shutdown logic polarity and timing in the device documentation, and include output-state behavior when the amplifier transitions into or out of shutdown.
What design details matter for a 110 MHz current-feedback amplifier?
A 110 MHz current-feedback amplifier requires short feedback paths, low-inductance supply connections, careful grounding, and the manufacturer's recommended feedback resistance for the intended gain. Source impedance, load capacitance, and output-current demand can alter stability and frequency response. Keep bypass capacitors close to the supply pins, minimize input-node capacitance, and validate the final layout with the actual cable, sensor, or driver load.
What is the lifecycle status of THS3115ID?
The THS3115ID is currently treated as an active orderable device because Texas Instruments maintains a dedicated product page and ordering entry for the exact MPN. The exact package, temperature range, and qualification details should be read from the ordering table. Contact the manufacturer through the Request a Quote form on this page when long-term availability or a formal lifecycle statement is required for an approved design.
Where to buy THS3115ID online and what is the price?
Use the Request a Quote form on this page to request current THS3115ID pricing, stock, and lead time for your required quantity and package. No fixed price is stated because market pricing and availability can change without notice. Include the target quantity, acceptable shipment date, and whether reels, cut tape, or another approved packing method are required so the request can be evaluated accurately.
What is the lead time for THS3115ID?
The current lead time for THS3115ID should be requested through the Request a Quote form on this page because lead time can vary with quantity, package configuration, and inventory status. Provide the required order quantity, production date, and permitted delivery window. For an approved BOM, request a manufacturer lifecycle and supply statement in addition to a commercial quotation to reduce sourcing risk.
Is THS3115ID in stock?
Current THS3115ID inventory should be confirmed through the Request a Quote form on this page. A listing page may show changing availability, but it does not guarantee allocation for a specific production order. State the required quantity and desired shipment date in the request. For new production builds, also confirm the exact 14-pin SOIC ordering code and manufacturer packaging requirements.

داده‌های مرجع مهندسی برای THS3115ID — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose THS3115ID for a dual-channel 110 MHz current-feedback design that requires low input current noise, high output-current capability, shutdown, and a 14-pin SOIC footprint. It is especially suitable for communication equipment, video distribution, motor-driver interfaces, and piezo-driver interfaces. THS3115CDRG4 is the preferred same-family replacement candidate because a published comparison explicitly describes it as a complete replacement with consistent terminals and package. Consider THS3112ID or THS3112CDRG4 only after checking their exact bandwidth, supply limits, shutdown implementation, noise performance, and pin-level electrical behavior against the target design. Do not substitute solely because a device is labeled a current-feedback amplifier: source impedance, feedback resistance, capacitive loading, output-current demand, and PCB layout can determine whether a pin-compatible candidate operates identically in the finished circuit.

مقایسه با جایگزین‌ها

پارامتر این محصول THS3115CDRG4 THS3112ID THS3112CDRG4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 14-pin SOIC (D) 14-pin SOIC (D) 14-pin SOIC (D) 14-pin SOIC (D)
Amplifier Type Dual current-feedback operational amplifier Dual current-feedback operational amplifier Dual current-feedback operational amplifier Dual current-feedback operational amplifier
Number of Channels 2 channels 2 channels 2 channels 2 channels

تفاوت‌های کلیدی

  • Exact-family replacement candidate with confirmed package consistency (در مقابلTHS3115CDRG4)
  • Dual high-speed channels in a compact SOIC package (در مقابلTHS3112ID)
  • Low specified input current noise (در مقابلTHS3112CDRG4)
  • Defined low-power shutdown behavior (در مقابلTHS3112ID)

یادداشت‌های طراحی

Place the input, output, feedback, and bypass connections on the same PCB layer where practical. Keep feedback resistors and their associated input nodes compact to minimize parasitic inductance and capacitance at high frequency. Use a continuous ground plane and avoid routing sensitive input traces beneath noisy digital, switching, or power-conversion nodes. The 110 MHz bandwidth makes physical distance and return-path continuity significant even when the schematic appears simple.

Use the manufacturer-recommended supply and bypass configuration for the selected THS3115 ordering option. The confirmed 300 µA shutdown quiescent current per channel is a shutdown-state value, not the active operating current; active consumption depends on supply voltage, quiescent current, output swing, load, and frequency. Confirm those operating limits in the electrical-characteristics table before sizing the supply and calculating dissipation.

Do not calculate gain with the conventional voltage-feedback formula and then choose a feedback resistor independently of the source impedance. Current-feedback amplifiers require the recommended feedback resistance and often specific resistor values for target gains. Check the complete source, feedback, load, and cable network for stability. Large capacitive loads, long feedback loops, and mismatched source impedances can reduce phase margin or cause ringing.

Treat shutdown as a timed control signal rather than an ordinary static logic input. Confirm its polarity, assertion time, and output behavior from the manufacturer documentation. If the amplifier is disabled during a transition, its output may not follow the input normally. In systems that repeatedly enter and leave shutdown, include the timing in the system-level test plan and avoid sensitive nodes where shutdown transients could inject noise into downstream circuitry.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were available for the exact THS3115ID ordering option. Confirm these attributes on the manufacturer product and ordering pages before using the device in a regulated production design.

تاریخ تأیید داده‌ها: 2026-11-10 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

THS3115ID datasheet THS3115ID pinout THS3115ID datasheet pdf THS3115ID specifications THS3115ID equivalent THS3115ID replacement THS3115ID drop-in replacement THS3115ID vs THS3115CDRG4 THS3115ID SOIC-14 amplifier THS3115ID price THS3115ID stock Texas Instruments THS3115ID THS3115ID application circuit THS3115 current feedback amplifier 110 MHz dual SOIC-14 amplifier

قطعات و اصطلاحات مرتبط

Texas Instruments THS3115ID THS3115CDRG4 THS3112ID THS3112CDRG4 THS3115 current-feedback amplifier CFA operational amplifier analog signal-conditioning IC semiconductor 110 MHz bandwidth 2.9 pA/√Hz noninverting input current noise 10.8 pA/√Hz inverting input current noise 300 µA shutdown quiescent current per channel 14-pin SOIC package SOIC family surface-mount package SMD low-noise amplifier high-output-current amplifier video distribution communication equipment motor-driver interface piezo-driver interface
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ