اطلاعیه آخرین فرصت خرید: TJA1021T/10/C به پایان چرخه عمر نزدیک می‌شود. آخرین تاریخ سفارش: با ما تماس بگیرید. مشاهده قطعات جایگزین موجود →
NXP Semiconductors

TJA1021T/10/C - 10.4 kBd LIN Transceiver | NXP | SO-8

MPN: TJA1021T/10/C ✗ پایان تولید
8-pin SO Package 10.4 kBd Speed
حداقل سفارش: 1 |

TJA1021T/10/C نمای کلی

The NXP Semiconductors TJA1021T/10/C is a half LIN-bus transceiver optimized for 10.4 kBd operation and packaged in an 8-pin SO package. It supports LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602 and ISO 17987-4:2016 communication, providing the physical-layer interface between a LIN protocol controller and an automotive or industrial LIN network. The integrated transceiver includes the LIN bus driver and receiver needed to connect a host controller to the bus.

A LIN transceiver, also called a LIN physical-layer interface, converts logic-level signals from a LIN controller into the dominant and recessive states used on the physical bus. It also receives bus levels and presents compatible logic signals to the controller. Within the hierarchy of interface ICs, the TJA1021 belongs to the automotive LIN transceiver class and supports low-speed serial networking commonly used for distributed vehicle body and comfort systems.

The TJA1021T/10/C is specifically optimized for the 10.4 kBd maximum transmission speed specified by SAE J2602. NXP identifies the device as compatible with the TJA1020 and MC33662 (B), which supports reuse of established LIN hardware platforms. Its LIN 2.x protocol coverage and standardized bus interface allow it to be used alongside common automotive LIN controllers, while the 8-pin SO package keeps the physical implementation compact.

NXP describes the TJA1021 family as operating from 1 kBd to 20 kBd and supporting LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602 and ISO 17987-4:2016. The /10 derivative emphasizes 10.4 kBd performance, while /20 derivatives emphasize the maximum 20 kBd rate. This distinction is important when the physical bus topology, transceiver selection or protocol-controller timing was designed around a particular LIN operating speed.

Typical applications include automotive LIN master and slave nodes, door and seat modules, climate-control controllers, lighting modules, sensor gateways and body-control subsystems. The same physical interface can also support industrial LIN-compatible equipment where a standardized low-speed serial bus is used instead of a more complex CAN or Ethernet network.

When laying out a replacement board, confirm the exact pin functions and exposed-pad requirements against the NXP manufacturer datasheet. Pay particular attention to bus termination, ground connection, supply decoupling and the controller-side logic levels; changing a LIN transceiver package variant without checking these details can create interoperability or EMC problems even when the connector appears identical.

This product page combines protocol compatibility, package information, lifecycle status, verified source links and engineering-oriented selection guidance. It also identifies pin-compatible NXP family alternatives and explains when their optimized LIN baud rate or device generation changes the replacement decision.

جایگزین‌های drop-in برای TJA1021T/10/C — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای TJA1021T/10/C (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Product Type.

NXP Semiconductors
Package: 8-SO (SOIC-8) SMD
Product Type: LIN Transceiver (single-wire bus PHY)

TJA1020T/N1,118

✅ جایگزین مستقیم
📦 SO-8
Pin-compatible with TJA1021 per NXP; the /10 device is optimized for 10.4 kBd while the TJA1020 is an older-generation LIN transceiver.

📋 جایگزین مرجع (خارج از کاتالوگ)

MC33662B

✅ جایگزین مستقیم
📦 SO-8
NXP states TJA1021 pin compatibility with MC33662 (B); TJA1021 covers six named LIN/protocol variants versus the older MC33662B generation.

📋 جایگزین مرجع (خارج از کاتالوگ)

TJA1021AT/10

✅ جایگزین مستقیم
📦 SO-8
Same 10.4 kBd optimization and SO-8 pin arrangement; the AT variant is a distinct same-family device designation.

📋 جایگزین مرجع (خارج از کاتالوگ)

TJA1021T/20/C

✅ جایگزین مستقیم
NXP Semiconductors
📦 SO-8
LIN Transceiver (single-wire bus PHY) · LIN 2.0 / 2.1 / 2.2 / 2.2A / SAE J2602 / ISO 17987-4:2016 · 20 kBd (/20 variant) · 1 kBd · 3.0 V to 5.5 V (typical 5 V) · 5 V to 27 V (extended -27 V to +40 V with load dump) · 1 (half-duplex LIN bus + TXD/RXD logic) · 8-SO (SOIC-8) SMD

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

TJA1021BT/20

✅ جایگزین مستقیم
📦 SO-8
Same-family SO-8 pin arrangement with newer SOI3+ implementation; the /20 suffix is optimized for 20 kBd rather than 10.4 kBd.

📋 جایگزین مرجع (خارج از کاتالوگ)

TJA1021T/10/C مشخصات

Product Type LIN bus transceiver
Transceiver Configuration Half LINbus
بسته‌بندی 8-pin SO
نوع نصب Surface mount
Optimized LIN Transmission Speed 10.4 kBd
Family Supported Baud Rate Range 1 kBd to 20 kBd
LIN 2.0 Support Supported
LIN 2.1 Support Supported
LIN 2.2 Support Supported
LIN 2.2A Support Supported
SAE J2602 Support Supported
ISO 17987-4:2016 Support Supported
Pin Compatibility Compatible with TJA1020 and MC33662 (B)
Integrated Functions LIN bus driver and receiver

راهنمای پیکربندی پین TJA1021T/10/C 8-pin so

پیکربندی پین برای TJA1021T/10/C (پکیج 8-pin so). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 8-pin so برای TJA1021T/10/C

داده پین‌آوت تفصیلی موجود نیست برای TJA1021T/10/C.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

TJA1021T/10/C مناسب است برای 6 کاربردs: Automotive LIN Master Node, Vehicle Body Control Module, Door and Seat Control Module, Automotive Lighting Controller, Industrial LIN Sensor Gateway, Climate Control Node.

🚗

Automotive LIN Master Node

The TJA1021T/10/C fits an automotive LIN master node where the host controller must communicate with slave modules over the physical LIN bus. Its 10.4 kBd optimization aligns with the SAE J2602 operating point, while support for LIN 2.0, LIN 2.1, LIN 2.2 and LIN 2.2A provides compatibility with common automotive control architectures. The integrated driver and receiver reduce the external interface circuitry required between the controller and bus. Because the device is End of Life, a replacement review should confirm supply continuity, protocol timing and the exact 8-pin SO footprint before committing a new production design.

🚗

Vehicle Body Control Module

A body-control module can use the TJA1021T/10/C to connect a local microcontroller to LIN-attached door, mirror, lighting or climate-control modules. The 10.4 kBd-optimized interface suits established SAE J2602 network segments, while the eight-pin SO package supports compact board layouts. Its documented support for LIN 2.2A and ISO 17987-4:2016 can be valuable when the host controller and attached nodes implement newer LIN behavior. Design reviews should verify the bus termination strategy, ground reference and controller-side signal levels against the NXP datasheet, particularly for an End of Life production continuation.

🚗

Door and Seat Control Module

The TJA1021T/10/C is appropriate for distributed door or seat-control nodes that exchange commands and sensor status with a vehicle master through a LIN bus. The half LIN-bus configuration integrates the physical driver and receiver while the 10.4 kBd suffix targets a conservative SAE J2602 operating rate suitable for low-bandwidth body systems. Using a standard SO-8 footprint also simplifies mechanical integration beside the node microcontroller. Before release, validate wake-up, sleep and standby behavior, bus overvoltage tolerance and operating temperature because those electrical details must be taken directly from the manufacturer datasheet.

💡

Automotive Lighting Controller

A LIN-connected lighting controller can employ the TJA1021T/10/C as the physical interface between its controller and the vehicle LIN network. The device's 10.4 kBd optimization and support for six named LIN and related protocol versions provide a standardized basis for command exchange with distributed lighting nodes. Integration in an 8-pin SO package limits board-area impact in compact electronic control units. Engineers should confirm that the module's LIN controller timing, supply range and fault-recovery requirements match the selected transceiver, and should plan early for EOL availability or a qualified pin-compatible replacement.

🏭

Industrial LIN Sensor Gateway

The TJA1021T/10/C can bridge a microcontroller or embedded controller to a LIN-compatible sensor network in industrial equipment. Although LIN is most strongly associated with automotive body systems, its single-wire bus and standardized physical layer are also suitable for low-cost distributed controls. The transceiver operates in a half-bus arrangement, supports LIN 2.x protocol versions and is optimized for 10.4 kBd communication. The SO-8 package simplifies assembly into compact gateways. Verify the industrial environment's temperature range, EMC requirements and bus topology because those specifications are not established by the family-level product description alone.

🏭

Climate Control Node

A climate-control node can use the TJA1021T/10/C to connect temperature, fan or actuator controllers over a LIN subnetwork. The 10.4 kBd operating point is appropriate for low-bandwidth control traffic and provides a defined match to the SAE J2602 specification cited by NXP. Protocol support across LIN 2.0 through LIN 2.2A improves the chance of compatibility with established vehicle controllers, while the eight-pin SO package keeps the interface compact. During schematic review, confirm logic thresholds, supply decoupling and pin assignments in the NXP datasheet, then review an approved substitute if the End of Life status affects procurement continuity.

خلاصه محصولات پیشنهادی

TJA1021T/10/C NXP Semiconductors استفاده‌شده در: Automotive LIN Master Node, Automotive Lighting Controller TJA1021AT/10 same-family 10.4 kBd alternative استفاده‌شده در: Automotive LIN Master Node, Automotive Lighting Controller, Climate Control Node TJA1020T/N1,118 pin-compatible legacy LIN interface استفاده‌شده در: Vehicle Body Control Module, Industrial LIN Sensor Gateway MC33662B pin-compatible LIN transceiver family استفاده‌شده در: Vehicle Body Control Module, Industrial LIN Sensor Gateway TJA1021T/20/C NXP Semiconductors استفاده‌شده در: Door and Seat Control Module, Climate Control Node TJA1021BT/20 SOI3+ family alternative استفاده‌شده در: Door and Seat Control Module
What is the TJA1021T/10/C?
The TJA1021T/10/C is an NXP Semiconductors half LIN-bus transceiver optimized for 10.4 kBd communication and packaged in an 8-pin SO package. According to the NXP manufacturer datasheet, it interfaces a LIN protocol controller with the physical bus and supports LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602 and ISO 17987-4:2016. Its integrated driver and receiver make it suitable for automotive master or slave nodes as well as industrial LIN-compatible equipment.
What LIN baud rate is TJA1021T/10/C optimized for?
The TJA1021T/10/C is optimized for a maximum LIN transmission speed of 10.4 kBd, as specified by SAE J2602. The NXP manufacturer datasheet contrasts this /10 version with /20 versions optimized for 20 kBd, although the TJA1021 family supports operation from 1 kBd to 20 kBd. Select the /10 derivative when the existing bus and controller are designed around the 10.4 kBd SAE J2602 operating point.
Where can I download the TJA1021T/10/C datasheet PDF?
The official TJA1021T/10/C datasheet PDF is available from the NXP document link on this page. It contains the authoritative pin descriptions, electrical characteristics, timing information and recommended application circuit. Use the manufacturer document for PCB assignments and replacement validation rather than relying on distributor summaries, and compare the selected /10 suffix against the application circuit because the family also includes parts optimized for 20 kBd.
Where can I find the TJA1021T/10/C pinout?
The TJA1021T/10/C pinout is shown in the NXP manufacturer datasheet under the package and pin-description information for the 8-pin SO device. The public product listing confirms the 8-pin SO package, but it does not reproduce every terminal name. When assigning PCB tracks or checking a substitute, use the pin-description table and footprint drawing in the NXP datasheet to verify supply, ground, controller-interface and LIN-bus connections.
What standards and LIN versions does TJA1021T/10/C support?
The TJA1021T/10/C supports LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602 and ISO 17987-4:2016 communication. According to the NXP product information, the family operates from 1 kBd to 20 kBd, with this /10 version optimized for the 10.4 kBd SAE J2602 rate. This standards coverage allows the transceiver to be used in established LIN controller and physical-bus designs without changing the communication architecture.
Is TJA1021T/10/C still active?
No, the NXP product page identifies TJA1021T as End of Life. The manufacturer still provides the product information and datasheet needed for design review, while new production availability may be limited. Engineers should confirm lifecycle status and supply continuity for the exact ordering suffix, then consider a documented drop-in replacement when long-term availability is required.
What can replace TJA1021T/10/C?
Documented pin-compatible options include the NXP TJA1020T/N1,118, MC33662B and TJA1021AT/10 in the same SO-8 class, while TJA1021T/20/C and TJA1021BT/20 are family alternatives optimized for 20 kBd rather than 10.4 kBd. The NXP product page explicitly states TJA1021 pin compatibility with TJA1020 and MC33662 (B). Verify protocol coverage, supply limits, bus timing and the exact footprint before approving any substitution.
Can TJA1021T/10/C replace a TJA1020T/N1,118?
The TJA1021T/10/C can be used as a replacement candidate because NXP states that the TJA1021 is pin-compatible with the TJA1020. However, a true drop-in decision must also confirm controller logic compatibility, operating temperature, supply voltage, bus timing and EMC performance. The TJA1021 family supports LIN 2.0 through LIN 2.2A plus SAE J2602 and ISO 17987-4:2016, which can provide broader protocol coverage than an older TJA1020 design.
Is TJA1021T/10/C the same as TJA1020T/N1,118?
The devices are not identical, but the NXP TJA1021 is stated to be pin-compatible with the TJA1020. TJA1021T/10/C is the 10.4 kBd-optimized derivative and supports the LIN 2.x family plus SAE J2602 and ISO 17987-4:2016, while MC33662 (B) is also identified as a pin-compatible family reference. Confirm every electrical limit and the package footprint before treating either device as a production replacement.
TJA1021T/10/C vs TJA1021T/20/C: which is better for a 10.4 kBd LIN bus?
TJA1021T/10/C is the better match for a bus deliberately optimized around the 10.4 kBd SAE J2602 operating point. NXP describes the /10 version as optimized for 10.4 kBd, whereas the /20 version is optimized for the maximum specified LIN speed of 20 kBd. Both belong to the same transceiver family, but the selection should follow the existing controller timing, bus margin and qualification requirements rather than treating the suffixes as interchangeable packaging codes.
When should I choose TJA1021T/10/C over a 20 kBd TJA1021 alternative?
Choose TJA1021T/10/C when the design specifically targets the 10.4 kBd SAE J2602 operating point or requires the documented 10 kBd derivative behavior. Choose a 20 kBd-optimized alternative when the LIN controller, wiring and system timing are designed for the higher rate and the design requires that maximum operating point. The shared family architecture helps replacement, but the baud-rate optimization should match the original system requirement.
Where can I buy TJA1021T/10/C and check current availability?
Use the Request a Quote form on this page to request current availability, minimum order quantity and lead time for TJA1021T/10/C. The NXP product page identifies the family as End of Life, so supply status may vary by exact ordering code. Include your required quantity, package suffix and target date in the request so the quote reflects the precise production and logistics requirement.
What is the price of TJA1021T/10/C?
Current pricing for TJA1021T/10/C should be requested through the Request a Quote form on this page because the device is identified as End of Life and commercial terms can vary with quantity and availability. The quote request should specify the exact suffix TJA1021T/10/C, required quantity and delivery destination. This approach also lets procurement confirm whether any obsolete or excess stock is available for production continuity.
What is the lead time for TJA1021T/10/C?
The current lead time for TJA1021T/10/C must be confirmed through the Request a Quote form on this page. NXP identifies the TJA1021 family as End of Life, and no universal lead time can be inferred from the product lifecycle status. Request a quote with your required quantity and production schedule so the response can reflect current component sourcing, traceability requirements and delivery timing.
Is TJA1021T/10/C in stock?
Stock for TJA1021T/10/C should be confirmed through the Request a Quote form on this page. The NXP product page reports the TJA1021 family as End of Life, and a listing's availability indication does not guarantee a fixed quantity for a production order. State the required order quantity, date code preference and traceability requirement in the quote request to obtain an actionable availability response.
What are the key specifications of TJA1021T/10/C that engineers should know?
The key TJA1021T/10/C specifications are its 10.4 kBd optimization, 8-pin SO package, half LIN-bus configuration and support for LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602 and ISO 17987-4:2016. According to the NXP product information, the TJA1021 family supports baud rates from 1 kBd to 20 kBd and is pin-compatible with the TJA1020 and MC33662 (B), providing useful constraints for replacement planning.

داده‌های مرجع مهندسی برای TJA1021T/10/C — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose TJA1021T/10/C when maintaining a LIN subsystem designed around the 10.4 kBd SAE J2602 operating point and requiring an 8-pin SO physical-layer interface. TJA1021AT/10 is the closest same-speed family candidate, while TJA1021T/20/C or TJA1021BT/20 suit designs intentionally optimized for 20 kBd. TJA1020T/N1,118 and MC33662B are useful pin-compatible NXP references when maintaining an older LIN node. Because TJA1021T is End of Life, choose a replacement only after comparing the exact pinout, supply limits, LIN timing, protocol requirements, temperature range, sleep behavior and EMC implementation. Mechanical SO-8 compatibility alone is not sufficient; an automotive production decision also requires supplier traceability and lifecycle confirmation.

مقایسه با جایگزین‌ها

پارامتر این محصول TJA1020T/N1,118 MC33662B TJA1021AT/10 TJA1021T/20/C TJA1021BT/20
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package SO-8 SO-8 SO-8 SO-8 SO-8 SO-8
Documented Pin Compatibility TJA1021 family reference Pin-compatible with TJA1021 MC33662 (B) pin-compatible with TJA1021 Same TJA1021 family Same TJA1021 family Pin-to-pin and hardware/software compatible with TJA1021T/20

تفاوت‌های کلیدی

  • Application-specific 10.4 kBd optimization (در مقابلTJA1021T/20/C)
  • Broader documented protocol coverage (در مقابلMC33662B)
  • Established pin compatibility within the NXP portfolio (در مقابلTJA1020T/N1,118)

یادداشت‌های طراحی

Assign the PCB footprint and every net by comparing the exact ordering code with the pin-description and package drawings in the NXP manufacturer datasheet. The listing confirms an 8-pin SO package, but a mechanically similar package does not guarantee identical lead numbering or exposed-pad requirements. Place the transceiver close to the LIN connector and controller, maintain a continuous ground reference and route the bus away from switching nodes and sensitive analog traces.

Do not treat the /10 and /20 suffixes as packaging variants. TJA1021T/10/C is optimized for 10.4 kBd, while the TJA1021T/20/C is optimized for 20 kBd. Although both support the broader 1 kBd to 20 kBd family range, the optimized device choice should match the controller timing and bus design. Also verify that a selected substitute has the same pin arrangement rather than relying only on an SO-8 package designation.

Preserve the LIN bus topology and termination arrangement recommended for the controller and transceiver. Keep the LIN connection away from clocks, power inductors and high-current switching paths, and provide a low-impedance ground return beneath the transceiver and its decoupling network. EMC performance depends on the complete node implementation, so validate the assembled module against the applicable automotive or industrial requirements rather than judging the transceiver in isolation.

Follow the NXP recommended supply-decoupling arrangement and keep the input capacitor connection short between the device pins and ground. Confirm the production design's supply range, sleep current and transceiver state transitions against the datasheet before changing components. For an End of Life replacement, compare these electrical characteristics as well as the pinout; a mechanically identical substitute can still alter system power budget or controller timing.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free or conflict-minerals statement was identified in the source results. Automotive protocol standards shown for this device must not be interpreted as AEC-Q100 qualification.

تاریخ تأیید داده‌ها: 2026-11-18 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

tja1021t datasheet tja1021t lin transceiver tja1021t pinout TJA1021T/10/C datasheet pdf TJA1021T/10/C LIN transceiver TJA1021T/10/C pinout TJA1021T/10/C equivalent TJA1021T/10/C replacement TJA1021T/10/C vs TJA1021T/20/C NXP TJA1021T/10/C SO-8 TJA1021T/10/C automotive LIN TJA1021T/10/C price TJA1021T/10/C stock TJA1021T/10/C cross reference TJA1021T/10/C application circuit

قطعات و اصطلاحات مرتبط

NXP Semiconductors TJA1021T/10/C TJA1020T/N1,118 MC33662B TJA1021AT/10 TJA1021T/20/C TJA1021BT/20 LIN transceiver LIN physical-layer interface automotive LIN bus half LIN-bus transceiver interface IC serial interface IC SO-8 package surface-mount package LIN 2.0 LIN 2.1 LIN 2.2 LIN 2.2A SAE J2602 ISO 17987-4:2016 10.4 kBd 20 kBd body control module
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ