Texas Instruments

TLV2451CD - 6V, 220kHz, 23uA RRIO Op Amp | Texas Instruments

MPN: TLV2451CD ✓ فعال
6 V maximum Vdss 23 uA per channel Id 8-pin SOIC Package
حداقل سفارش: 1 |

TLV2451CD نمای کلی

The Texas Instruments TLV2451CD is a single, 6 V, rail-to-rail input and output operational amplifier with a 220 kHz gain-bandwidth product and 23 uA quiescent current, housed in an 8-pin SOIC package. Its combination of low supply current and moderate bandwidth targets compact, low-power analog systems that require input and output swing close to the supply rails. The TLV2451CD is intended for portable instrumentation, low-voltage sensor interfaces, and signal-conditioning circuits where a conventional rail-to-rail amplifier may consume excessive power.

An operational amplifier is an analog integrated circuit that uses high open-loop gain to amplify differences between signals applied to its inverting and non-inverting inputs. A rail-to-rail input stage accepts input voltages extending toward the positive and negative supply rails, while a rail-to-rail output stage can produce output voltages close to those rails. Within the broader semiconductor hierarchy, the TLV2451CD belongs to the amplifier IC family and the operational-amplifier subcategory, providing analog signal conditioning ahead of measurement, control, or data-conversion stages.

The principal operating characteristics are a 6 V maximum supply, 220 kHz gain-bandwidth product, and 23 uA quiescent current. Rail-to-rail input and output capability provides useful signal-range flexibility in low-voltage circuits. These features make the device appropriate for battery-powered sensor nodes, industrial measurement interfaces, and low-voltage control systems. Its 220 kHz bandwidth supports general-purpose amplification rather than demanding high-speed video or precision signal-chain applications.

The TLV2451 is part of a broader low-power operational-amplifier family, and the TLV2451CD configuration provides one amplifier per 8-pin SOIC package. Compared with a higher-bandwidth amplifier, the TLV2451CD emphasizes lower power consumption while retaining enough bandwidth for many slow analog signals. Compared with a conventional non-rail-to-rail amplifier, its input and output stages offer greater usable range on low-voltage supplies. Designers should still verify gain stability, capacitive loading, output swing, and noise requirements for the intended feedback network and signal source.

Typical uses include bridge or thermistor sensor conditioning, current-loop signal processing, low-voltage data-acquisition front ends, portable measurement instruments, and embedded control systems powered from small batteries or low-current rails. In a sensor interface, the amplifier can convert small differential signals into a voltage suitable for an ADC or controller input. In a portable instrument, the 23 uA quiescent current helps limit continuous power demand when the signal bandwidth remains below the device's 220 kHz capability.

A practical design consideration is to check the feedback network against the required closed-loop gain and signal bandwidth, and to place the device close to its decoupling and feedback components. The power-supply pins must be bypassed as directed by the manufacturer datasheet, and input common-mode and output swing limits must be checked at the actual supply voltage and load. These checks are especially important when signals approach either supply rail.

This product page combines the manufacturer device description, exact-MPN distributor references, package information, drop-in alternatives, application guidance, and design checks to support faster engineering evaluation. It also distinguishes documented TLV2451CD characteristics from parameters that require confirmation against the current manufacturer datasheet before production release.

جایگزین‌های drop-in برای TLV2451CD — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

TLV2451IDR

✅ جایگزین مستقیم
📦 8-pin SOIC
Same TLV2451 single-amplifier family and 8-pin SOIC footprint; ordering suffix indicates different grade conditions, with the exact temperature and qualification limits requiring datasheet confirmation.

📋 جایگزین مرجع (خارج از کاتالوگ)

TLV2451AIDR

✅ جایگزین مستقیم
📦 8-pin SOIC
Same TLV2451 family and 8-pin SOIC footprint; the A ordering designation may change specified electrical or ordering conditions, so the exact suffix differences require datasheet confirmation.

📋 جایگزین مرجع (خارج از کاتالوگ)

TLV2451CD حداکثر مقادیر مجاز و مشخصات الکتریکی

Amplifier Type Single operational amplifier
ولتاژ تغذیه 6 V maximum
Gain-Bandwidth Product 220 kHz
جریان سکون 23 uA per channel
Input Rail-to-Rail Yes
Output Rail-to-Rail Yes
Number of Circuits 1 circuit
بسته‌بندی 8-pin SOIC
نوع نصب Surface mount
Amplifier Class Standard general-purpose amplifier

راهنمای پیکربندی پین TLV2451CD 8-pin soic

پیکربندی پین برای TLV2451CD (پکیج 8-pin soic). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 8-pin soic برای TLV2451CD

داده پین‌آوت تفصیلی موجود نیست برای TLV2451CD.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

TLV2451CD مناسب است برای 6 کاربردs: Battery-Powered Sensor Conditioning, Portable Instrumentation Signal Chain, Industrial Current-Sense Amplification, Low-Voltage Data-Acquisition Front End, Low-Voltage Control and Monitoring, Precision Low-Frequency Amplification.

🧩

Battery-Powered Sensor Conditioning

The TLV2451CD fits low-power sensor front ends that operate from a limited supply and produce signals near either rail. Its 23 uA quiescent current minimizes amplifier contribution to continuous battery drain, while the rail-to-rail input stage expands the usable range for sensors operating close to the supply limits. The 220 kHz gain-bandwidth product is suitable for temperature, pressure, and resistive sensor signals that change slowly. Use the amplifier with a noise gain compatible with its stability characteristics, and verify actual input bias current, offset, output swing, and sensor-source impedance before deployment.

📱

Portable Instrumentation Signal Chain

The TLV2451CD is suitable for portable meters and low-current measurement instruments requiring analog amplification without a high-power amplifier. Its 23 uA quiescent current helps preserve operating time when the instrument remains on continuously, and the single-amplifier 8-pin SOIC package simplifies board partitioning. The 220 kHz gain-bandwidth product supports general-purpose measurements rather than high-frequency waveform analysis. For bridge, current-loop, or sensor-amplifier stages, select the feedback network so closed-loop noise gain remains compatible with the intended compensation and check common-mode range at the lowest supply voltage.

🏭

Industrial Current-Sense Amplification

The TLV2451CD can amplify a low-level current-sense voltage when the required signal bandwidth remains below its 220 kHz gain-bandwidth capability. Rail-to-rail input and output stages support operation from compact low-voltage supplies used in industrial control boards. The 23 uA quiescent current is useful in space-constrained systems where every milliamp of auxiliary load matters. Designers should calculate shunt dissipation, check input offset and bias-current effects, and ensure the amplifier remains in its linear operating region across the measured current range and common-mode excursions.

🖥️

Low-Voltage Data-Acquisition Front End

The TLV2451CD is appropriate for conditioning slower sensor channels before an ADC in a compact data-acquisition system. Its 220 kHz gain-bandwidth product provides ample bandwidth for many low-rate measurements, and the single-8-pin-SOIC implementation leaves board area for the converter and signal routing. The low 23 uA quiescent current benefits multi-channel systems where amplifier leakage and auxiliary power affect thermal design. Confirm the ADC input range, required gain, settling behavior, and antialiasing requirements; use the manufacturer datasheet to evaluate noise, offset, and settling characteristics.

🔧

Low-Voltage Control and Monitoring

The TLV2451CD can buffer control signals or amplify feedback voltages in embedded systems powered from a low-current rail. Rail-to-rail input and output behavior helps retain usable signal range when the control voltage occupies much of the supply span, while 23 uA quiescent current limits the amplifier's continuous overhead. The 220 kHz bandwidth accommodates many slow control loops and monitoring thresholds. Validate stability with the actual source and load impedances, verify output-current capability, and include appropriate protection if external wiring can introduce transients beyond the device's absolute maximum conditions.

📡

Precision Low-Frequency Amplification

The TLV2451CD is suitable for low-frequency precision-oriented stages when the required gain and settling performance remain within the device's 220 kHz gain-bandwidth capability. Rail-to-rail input and output stages improve flexibility on low-voltage supplies, and the single-amplifier SOIC package provides a straightforward PCB implementation. Precision applications still require review of input offset voltage, input bias current, voltage noise, current noise, and drift using the manufacturer datasheet. Resistor choice and PCB leakage can matter more than the nominal gain accuracy in high-impedance measurement circuits.

خلاصه محصولات پیشنهادی

TLV2451IDR Same-family single-amplifier option for alternate grade review استفاده‌شده در: Battery-Powered Sensor Conditioning, Portable Instrumentation Signal Chain, Industrial Current-Sense Amplification, Low-Voltage Data-Acquisition Front End, Low-Voltage Control and Monitoring, Precision Low-Frequency Amplification TLV2451AIDR Same-family single-amplifier option for feature comparison استفاده‌شده در: Battery-Powered Sensor Conditioning, Portable Instrumentation Signal Chain, Industrial Current-Sense Amplification, Low-Voltage Data-Acquisition Front End, Low-Voltage Control and Monitoring, Precision Low-Frequency Amplification
What are the key specifications of TLV2451CD that engineers should know?
The TLV2451CD is a single operational amplifier with a 6 V maximum supply voltage, 220 kHz gain-bandwidth product, 23 uA quiescent current, and rail-to-rail input and output stages in an 8-pin SOIC package. According to the Texas Instruments TLV2451 product page, this combination makes it a general-purpose, low-power amplifier for low-voltage systems. It is particularly useful when signal bandwidth is modest but supply current and input/output range are important.
What is the operating voltage of TLV2451CD?
The TLV2451CD supports operation from low-voltage supplies up to a 6 V maximum supply. Texas Instruments identifies the device as a single 6 V operational amplifier on its official product page. The exact minimum operating voltage, absolute maximum ratings, and voltage limits associated with each supply pin should be confirmed in the manufacturer datasheet before the amplifier is connected to a battery or an externally adjustable rail.
What is the gain-bandwidth product of TLV2451CD?
The TLV2451CD has a gain-bandwidth product of 220 kHz. According to the Texas Instruments product description, this is substantially higher than the bandwidth normally associated with very-low-power general-purpose amplifiers while remaining suitable for low-frequency analog conditioning. The usable closed-loop bandwidth also depends on the selected noise gain and the specific feedback and compensation arrangement.
How much quiescent current does TLV2451CD consume?
The TLV2451CD consumes 23 uA of quiescent current per channel. This low operating current is a central feature of the device and is documented in the Texas Instruments TLV2451 product-page summary. It helps preserve battery life in continuously powered sensor, monitoring, and portable-instrument applications, although total system current also includes load current and any attached indicator or interface circuitry.
Is TLV2451CD rail-to-rail input and output?
Yes, the TLV2451CD uses rail-to-rail input and output stages. According to the Texas Instruments product description, this permits input and output operation closer to the supply rails than a conventional amplifier topology. Rail-to-rail behavior does not mean the output reaches either rail exactly, so designers should check output swing, load, supply voltage, and output-current conditions in the manufacturer datasheet.
Where can I download the TLV2451CD datasheet PDF?
The official TLV2451 datasheet is available from the Texas Instruments product link at https://www.ti.com/lit/gpn/TLV2451. The document covers the amplifier family and ordering information relevant to the TLV2451CD. It is the controlling source for the complete pin description, electrical characteristics, recommended operating conditions, package drawings, and application guidance.
Where can I find the TLV2451CD pinout?
The TLV2451CD pinout is shown in the pin-configuration section of the Texas Instruments TLV2451 datasheet at https://www.ti.com/lit/gpn/TLV2451. The device is specified in an 8-pin SOIC package. Use the numbered package drawing and pin-description table from that document when assigning input, output, supply, and shutdown-related connections.
What can replace the TLV2451CD?
TLV2451IDR is the closest same-family drop-in candidate identified for the TLV2451CD because both use the 8-pin SOIC format and belong to the TLV2451 single-amplifier family. A final replacement decision must confirm electrical ratings, temperature grade, shutdown behavior, and pin function against the manufacturer datasheet. The TLV2451AIDR is another family member, but its exact functional differences require review before substitution.
Is TLV2451IDR the same as TLV2451CD?
TLV2451IDR and TLV2451CD are closely related TLV2451 single-amplifier variants in the 8-pin SOIC package, but they are not automatically identical for every application. The ordering suffix can indicate different temperature-grade or qualification conditions, and the datasheet must be used to confirm operating limits and orderable status. PCB compatibility is therefore credible, while unconditional functional equivalence is not.
When should I choose TLV2451CD over TLV2451IDR?
Choose TLV2451CD when its specified grade and operating range satisfy the design and the exact TLV2451CD ordering information is required for production traceability. Consider TLV2451IDR when its documented temperature grade is a better fit for the target environment and all electrical functions match. The key selection point is the operating-temperature requirement, not package compatibility, because both candidates use the 8-pin SOIC footprint.
TLV2451CD vs TLV2451AIDR - which is better for low-power instrumentation?
TLV2451CD is preferable when its documented operating limits match the instrumentation environment and no special TLV2451A feature is required. TLV2451AIDR should be considered when the A-version's manufacturer-defined electrical or ordering characteristics provide a needed advantage. Both belong to a low-power, 220 kHz RRIO family, so the decision should be based on verified temperature range, offset, shutdown, and qualification differences rather than bandwidth alone.
What is the best Texas Instruments equivalent for TLV2451CD?
TLV2451IDR is the leading same-brand family equivalent identified by the cross-reference information because it retains the single-amplifier configuration and 8-pin SOIC package. TLV2451AIDR is another same-brand possibility for review. Before either is called a drop-in replacement, verify the complete pin descriptions, electrical characteristics, shutdown behavior, temperature grade, and lifecycle status against the current manufacturer datasheet.
Is TLV2451CD suitable for battery-powered sensor circuits?
The TLV2451CD is suitable for many battery-powered sensor circuits because it combines rail-to-rail input and output operation with 23 uA quiescent current. According to the Texas Instruments product-page summary, its 220 kHz gain-bandwidth product handles low-bandwidth sensor signals efficiently. Continuous battery life must be calculated using the actual supply voltage, sensor current, amplifier load, switching activity, and regulator efficiency rather than the amplifier current alone.
What is the price of TLV2451CD?
Pricing for the TLV2451CD changes with quantity, market conditions, and requested packaging. Use the Request a Quote form on this page to obtain current pricing, stock confirmation, and lead-time information for the exact TLV2451CD ordering code. Submit the required quantity, target package, and delivery location so the quotation reflects the intended production schedule.
Where can I buy TLV2451CD online and is it in stock?
The Request a Quote form on this page is the recommended channel for obtaining TLV2451CD availability, current commercial terms, and lead time. State the required quantity, SOIC package, and destination so the response reflects the exact assembly need. A catalog listing alone does not guarantee current stock, so production planning should rely on the quotation response rather than an old inventory indication.
How should TLV2451CD be used in a low-voltage sensor interface?
Use the TLV2451CD as a transimpedance or differential gain stage, with the feedback network selected for the required gain and bandwidth. Its rail-to-rail input stage is useful when sensor signals approach a low supply rail, while 23 uA quiescent current supports low-power operation. Check source impedance, sensor capacitance, feedback stability, output swing, and the 220 kHz gain-bandwidth limit before finalizing the circuit.

داده‌های مرجع مهندسی برای TLV2451CD — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the TLV2451CD for a low-voltage, low-power analog signal-conditioning design that needs one rail-to-rail input/output amplifier, a 220 kHz gain-bandwidth product, and 23 uA quiescent current in an 8-pin SOIC. It is especially appropriate for battery-operated sensing, portable instrumentation, and slow industrial measurement channels where higher bandwidth would add unnecessary power or complexity. Consider TLV2451IDR when its documented ordering grade or temperature range better matches the deployment environment; it retains the same family architecture and package. Evaluate TLV2451AIDR when the A-version's manufacturer-defined characteristics address a specific project requirement. Before substituting any candidate, verify pin functions, electrical limits, operating temperature, shutdown behavior, and lifecycle status in the current manufacturer datasheet.

مقایسه با جایگزین‌ها

پارامتر این محصول TLV2451IDR TLV2451AIDR
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments
Amplifier Configuration Single amplifier Single amplifier Single amplifier
Maximum Supply Voltage 6 V 6 V 6 V
Gain-Bandwidth Product 220 kHz 220 kHz 220 kHz
Quiescent Current 23 uA per channel 23 uA per channel 23 uA per channel
Input Common-Mode Range Rail-to-rail input Rail-to-rail input Rail-to-rail input
Output Swing Rail-to-rail output Rail-to-rail output Rail-to-rail output

تفاوت‌های کلیدی

  • Low quiescent current with moderate bandwidth (در مقابلTLV2451IDR)
  • Single-amplifier 8-pin SOIC implementation (در مقابلTLV2451AIDR)
  • Rail-to-rail signal range for low-voltage designs (در مقابلTLV2451IDR)

یادداشت‌های طراحی

Use the 23 uA per-channel quiescent current as the amplifier's baseline supply demand, but calculate the complete channel budget with load current, output state, and nearby circuitry. Place the bypass capacitor directly beside the supply pins and keep the return path short. Because rail-to-rail stages can draw additional current as the output approaches a rail, include worst-case output-current conditions in the supply-sizing calculation rather than relying only on the quiescent figure.

Select the feedback resistors and capacitor so the required signal gain is supported by the 220 kHz gain-bandwidth product without creating an unstable noise gain. Check the source impedance, sensor capacitance, PCB leakage, and feedback-node capacitance before finalizing high-impedance designs. For acquisition channels, confirm settling requirements with the actual gain, sampling interval, and external capacitance rather than relying on gain-bandwidth product alone.

Keep the amplifier, decoupling capacitor, feedback loop, and sensitive input nodes close together to minimize parasitic pickup and feedback-loop area. Route input signals away from supply and switching-node traces, and use a continuous ground reference beneath the signal path where practical. Verify the pin assignment against the pin-configuration drawing in the manufacturer datasheet before layout release, particularly for shutdown and supply connections.

Do not assume rail-to-rail input and output means the amplifier can accept every voltage at or beyond its supply rails. Check absolute maximum ratings, common-mode range, output swing, and output current under the worst load. Likewise, do not substitute a family member solely because it uses an 8-pin SOIC package; confirm the suffix-specific temperature grade, electrical limits, shutdown function, and qualification requirements.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

Compliance attributes were not stated in the manufacturer or distributor excerpts and must be confirmed from the current manufacturer product documentation.

تاریخ تأیید داده‌ها: 2026-11-15 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

TLV2451CD datasheet TLV2451CD pinout TLV2451CD datasheet pdf Texas Instruments TLV2451CD TLV2451CD 220kHz op amp TLV2451CD 23uA low power TLV2451CD 6V RRIO amplifier TLV2451 8-SOIC pinout TLV2451CD sensor amplifier TLV2451CD battery powered circuit TLV2451CD equivalent TLV2451CD replacement TLV2451CD vs TLV2451IDR TLV2451CD price TLV2451CD stock

قطعات و اصطلاحات مرتبط

Texas Instruments TLV2451CD TLV2451IDR TLV2451AIDR TLV2451 operational amplifier single amplifier amplifier IC analog integrated circuit semiconductor rail-to-rail input rail-to-rail output RRIO operational amplifier gain-bandwidth product quiescent current low-power amplifier 8-pin SOIC SOIC package surface-mount package battery-powered sensor conditioning portable instrumentation industrial current-sense amplification data-acquisition front end feedback network power-supply bypass capacitor
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ