Texas Instruments

TLV2454ID - 23µA Quad RRIO Op Amp | Texas Instruments

MPN: TLV2454ID ✓ فعال
2.7 V to 6 V Vdss 23 µA Id SOIC-14 Package
حداقل سفارش: 1 |

TLV2454ID نمای کلی

The Texas Instruments TLV2454ID is a quad rail-to-rail input and output operational amplifier operating from 2.7 V to 6 V, with 23 µA of quiescent current per channel, 220 kHz gain-bandwidth product, and a 14-pin SOIC package. Its low-power design provides four amplifiers in a compact package for portable instrumentation, sensor interfaces, and low-voltage analog systems. The device supports an operating temperature range of -40°C to +125°C and is specified for RoHS-compliant surface-mount assembly.

An operational amplifier is an analog signal-processing IC that amplifies the voltage difference between its inverting and non-inverting inputs. The rail-to-rail input stage accepts signals extending close to the positive and negative supply rails, while the rail-to-rail output stage can swing close to those rails under suitable load conditions. Within the power-management hierarchy, the TLV2454ID is a low-voltage, micropower amplifier suitable for battery-operated equipment where four precision amplifier channels are needed without the higher current demand of general-purpose quad op amps.

The TLV2454ID combines 220 kHz gain-bandwidth product with approximately 23 µA quiescent current per amplifier. Its typical input offset voltage is 20 µV, input bias current is 4.5 nA, and input voltage noise is 49 nV/√Hz at 100 Hz. The device also provides 70 dB common-mode rejection, 110 V/ms slew rate, and output drive capability of 10 mA. These characteristics make it useful for precision dc signal conditioning, low-level sensor amplification, and buffered analog measurement nodes.

The quad architecture implements four independent amplifiers in one 14-pin SOIC, reducing board area compared with discrete single or dual amplifier packages. Rail-to-rail input common-mode range and rail-to-rail output capability improve signal-chain flexibility on 2.7 V to 6 V supplies. Because the operating current is specified per channel, designers should calculate the total static demand from four channels and include the load current of the application when assessing battery life.

Typical uses include portable medical monitoring, low-power sensor acquisition, industrial current measurement, battery-powered test equipment, and general-purpose analog buffering. In sensor circuits, the low offset voltage and low bias current can minimize errors from slow-changing sensor signals. For bidirectional current sensing, the low-noise input stage supports small shunt voltages, while the 10 mA output-drive rating provides useful capability for driving subsequent analog stages.

Choose stable, low-ESR bypass capacitors and route each supply connection to its decoupling capacitor through low-impedance PCB traces. Confirm output swing, input common-mode limits, capacitive-load stability, and total channel current under worst-case conditions. Avoid using the output as a high-current buffer and verify that the selected gain and feedback network remain stable at the intended operating voltage.

This product page combines the TLV2454ID's principal electrical characteristics with same-family replacement guidance and practical PCB guidance. It helps engineers distinguish exact drop-in options from higher-speed or otherwise different amplifier families before committing a 14-pin SOIC footprint to a low-power design.

جایگزین‌های drop-in برای TLV2454ID — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

TLV2454AIDG4

✅ جایگزین مستقیم
📦 SOIC-14
Core ratings match at 23 µA per channel and 220 kHz gain-bandwidth product; the ordering suffix identifies a different grade designation.

📋 جایگزین مرجع (خارج از کاتالوگ)

TLV2455IDR

✅ جایگزین مستقیم
📦 SOIC-14
Quiescent current remains 23 µA per channel, while gain-bandwidth product increases from 220 kHz to approximately 1 MHz, a gain of about 355%.

📋 جایگزین مرجع (خارج از کاتالوگ)

TLV2464AID

✅ جایگزین مستقیم
📦 SOIC-14
Quad rail-to-rail topology and SOIC-14 package match, while gain-bandwidth product rises from 220 kHz to 10 MHz and quiescent current rises from 23 µA to 200 µA per channel.

📋 جایگزین مرجع (خارج از کاتالوگ)

TLV2454ID حداکثر مقادیر مجاز و مشخصات الکتریکی

Number of Amplifiers 4 channels
Supply Voltage Range 2.7 V to 6 V
Quiescent Current per Channel 23 µA
Gain-Bandwidth Product 220 kHz
Input Offset Voltage 20 µV typical
Input Bias Current 4.5 nA typical
Input Voltage Noise 49 nV/√Hz at 100 Hz
Input Offset Voltage Drift 300 nV/°C
Common-Mode Rejection 70 dB
Slew Rate 110 V/ms
Output Drive Capability 10 mA
Input Common-Mode Range -3 V to -1.35 V and 1.35 V to 3 V
محدوده دمای کاری -40°C to +125°C
بسته‌بندی SOIC-14
نوع نصب Surface mount
وضعیت RoHS Compliant

پیکربندی پین TLV2454ID

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
پین 1 OUTA — Amplifier A output
پین 2 INA- — Amplifier A inverting input
پین 3 INA+ — Amplifier A non-inverting input
پین 4 V+ — Positive supply voltage
پین 5 INB+ — Amplifier B non-inverting input
پین 6 INB- — Amplifier B inverting input
پین 7 OUTB — Amplifier B output
پین 8 OUTC — Amplifier C output
پین 9 INC- — Amplifier C inverting input
پین 10 INC+ — Amplifier C non-inverting input
پین 11 V- — Negative supply voltage
پین 12 IND+ — Amplifier D non-inverting input
پین 13 IND- — Amplifier D inverting input
پین 14 OUTD — Amplifier D output

کاربردهای معمول

TLV2454ID مناسب است برای 6 کاربردs: Portable Medical Sensor Acquisition, Battery-Powered Industrial Sensing, Precision Current Measurement, Portable Test and Measurement, Low-Voltage Signal Conditioning, Battery Charging and Power Monitoring.

💊

Portable Medical Sensor Acquisition

The TLV2454ID fits portable medical-sensor front ends that operate from a 2.7 V to 6 V rail and require several low-power analog channels. Its 23 µA quiescent current per channel limits static battery demand, while 4.5 nA typical input bias current helps preserve high-impedance sensor signals. Four rail-to-rail input/output amplifiers can condition pressure, temperature, or bio-sensor nodes without using four separate packages. The 220 kHz gain-bandwidth product is appropriate for low-frequency physiological signals rather than wideband waveform reconstruction.

🏭

Battery-Powered Industrial Sensing

The TLV2454ID supports battery-powered industrial sensor nodes where several low-level signals must be amplified without a high quiescent-power penalty. The 23 µA current per channel is useful when four channels operate continuously, and the 20 µV typical input offset helps preserve accuracy from slow-changing bridge or resistive sensors. Rail-to-rail input operation allows more of a 2.7 V to 6 V supply range to be used. The 110 V/ms slew rate supports signal changes that are faster than static dc measurements but do not require high bandwidth.

⚡

Precision Current Measurement

The TLV2454ID is suitable for amplifying the small differential voltage produced by a shunt in precision current-measurement circuits. Its 4.5 nA typical input bias current and 70 dB common-mode rejection help reject errors from common-mode voltage and source impedance, while 49 nV/√Hz input noise at 100 Hz supports low-level signal conditioning. Four channels can monitor several loads or provide differential and common configurations. The 10 mA output-drive rating is adequate for intermediate analog stages but not for low-ohmic direct loads.

🖥️

Portable Test and Measurement

The TLV2454ID is useful in handheld test and measurement equipment requiring four general-purpose amplifier channels in a compact 14-pin SOIC. It can buffer sensor outputs, amplify intermediate signals, and provide gain stages for low-frequency waveforms while drawing only 23 µA per channel. The 2.7 V minimum supply supports single-cell-derived 3 V systems, and rail-to-rail operation improves usable signal range. Instrument designers should still account for the 220 kHz bandwidth limit when evaluating step response and precision near the upper operating frequency.

🔧

Low-Voltage Signal Conditioning

The TLV2454ID is appropriate for general low-voltage signal conditioning between sensors, converters, and data-conversion stages. Four rail-to-rail amplifiers can amplify, level-shift, or buffer channels within a 2.7 V to 6 V system. Its low 23 µA per-channel current reduces overhead in continuously powered equipment, while the 110 V/ms slew rate and 10 mA output drive provide useful performance for moderate-speed analog signals. Feedback-network design remains important because each channel must remain stable at the selected gain and supply voltage.

🔋

Battery Charging and Power Monitoring

The TLV2454ID can support low-current battery monitoring and power-management signal chains where a 2.7 V to 6 V rail is available. Its four channels may monitor temperature, current, voltage thresholds, or charger status while keeping each channel's quiescent demand at 23 µA. Rail-to-rail inputs and outputs improve signal utilization in compact power systems, and the 14-pin SOIC reduces footprint compared with four single amplifiers. Designers should verify the actual output swing under load and confirm that transient currents from the charger do not violate output-drive or supply limits.

What are the key specifications of TLV2454ID that engineers should know?
The TLV2454ID is a quad, 2.7 V to 6 V operational amplifier with 23 µA quiescent current per channel and 220 kHz gain-bandwidth product in a 14-pin SOIC package. According to the Texas Instruments TLV2454 datasheet, it provides rail-to-rail input and output operation, 20 µV typical input offset voltage, 4.5 nA typical input bias current, 70 dB common-mode rejection, 110 V/ms slew rate, and 10 mA output-drive capability. Its -40°C to +125°C operating range makes it suitable for low-power industrial, portable, and instrumentation designs.
Where can I download the TLV2454ID datasheet PDF?
The official TLV2454ID datasheet PDF is available from the Texas Instruments literature server at https://www.ti.com/lit/gpn/TLV2454. The manufacturer product page at https://www.ti.com/product/TLV2454 provides the ordering table, device options, and supporting technical information. Use the manufacturer datasheet for the authoritative pin assignments, electrical characteristics, recommended operating conditions, and application guidance for the 14-pin SOIC configuration.
Where can I find the TLV2454ID pinout?
The TLV2454ID pinout is defined in the pin-configuration section of the Texas Instruments TLV2454 datasheet. The 14-pin SOIC provides four amplifier channels, two supply pins, and the associated input and output terminals. Confirm every PCB net against the package drawing and pin-description table before layout release because the exposed package dimensions, lead pitch, and numbering orientation must match the selected SOIC-14 footprint.
Is the TLV2454ID suitable for low-voltage sensor interfaces?
Yes, the TLV2454ID is well suited to low-voltage sensor interfaces because it combines rail-to-rail input operation with 23 µA quiescent current per channel. Its 4.5 nA typical input bias current reduces disturbance in high-impedance sensing nodes, while the 20 µV typical offset is useful for slow, low-level signals. According to the Texas Instruments datasheet, operation is specified from 2.7 V to 6 V, allowing the same quad device to serve multiple low-voltage analog channels.
What is the operating voltage range of TLV2454ID?
The TLV2454ID operates from 2.7 V to 6 V. The Texas Instruments TLV2454 datasheet identifies the 6 V maximum supply family and a 2.7 V lower operating limit, making the amplifier appropriate for 3 V and 5 V systems. Designers should maintain the specified input and output common-mode limits at each rail voltage and verify the complete analog signal range rather than assuming identical input swing under every supply condition.
How much current does the TLV2454ID consume?
The TLV2454ID consumes 23 µA of quiescent current per channel, or 92 µA for all four amplifiers under the specified no-load conditions. The Texas Instruments datasheet identifies the family as a 23 µA micropower operational-amplifier series. Actual supply demand also includes output load current and switching activity, so battery-life calculations should combine the four-channel static current with the average load current of the signals being driven.
Is TLV2454ID the same as TLV2454AIDG4?
The TLV2454ID and TLV2454AIDG4 share the quad rail-to-rail amplifier architecture, 14-pin SOIC package, 2.7 V to 6 V supply range, 23 µA per-channel quiescent current, and 220 kHz gain-bandwidth product. The primary documented difference is the ordering suffix and associated grade or qualification designation rather than the core amplification function. Check the current ordering table for the exact suffix, temperature treatment, marking, and lifecycle status before approving it as a production substitution.
What is the difference between TLV2454ID and TLV2464AID?
The TLV2454ID emphasizes low quiescent current at 23 µA per channel with a 220 kHz gain-bandwidth product, whereas the TLV2464AID belongs to a faster amplifier family. The comparison data identifies TLV2464AID as a quad rail-to-rail operational amplifier in the same 14-pin SOIC footprint, but its speed and current requirements are materially different. The TLV2454ID is preferable when micropower operation matters more than wide-band bandwidth.
When should I choose TLV2454ID over TLV2464AID?
Choose the TLV2454ID when battery life, portable-system current, or low-power sensor acquisition is the dominant requirement. Its 23 µA per-channel quiescent current and 220 kHz gain-bandwidth product are suited to slow analog signals that do not require the higher bandwidth of the TLV2464AID family. Both devices use a 14-pin SOIC format, so the choice should be based on complete electrical compatibility rather than package outline alone.
Is TLV2454ID suitable for portable medical instrumentation?
Yes, the TLV2454ID can fit portable medical-instrument signal chains that operate from a 2.7 V to 6 V supply and require several low-power analog channels. The 23 µA per-channel quiescent current limits static power demand, while rail-to-rail inputs improve utilization of a restricted voltage range. Application-specific safety, leakage, noise, and calibration requirements still determine whether the device is appropriate for a particular medical classification.
What is the best drop-in replacement for TLV2454ID?
TLV2454AIDG4 is the closest same-family drop-in candidate identified for the TLV2454ID because it retains the quad 14-pin SOIC package, 23 µA per-channel current, and 220 kHz gain-bandwidth product. TLV2464AID and TLV2455IDR share the package family but have different speed or feature tradeoffs. Verify the complete pin functions, electrical limits, grade, and lifecycle status in the manufacturer documentation before substitution.
What can replace TLV2454ID?
The strongest documented replacement is TLV2454AIDG4, which matches the TLV2454ID's quad configuration, SOIC-14 footprint, 2.7 V to 6 V supply range, 23 µA per-channel quiescent current, and 220 kHz gain-bandwidth product. TLV2464AID and TLV2455IDR are package-compatible alternatives with different bandwidth or functional characteristics. A valid replacement must satisfy pin-level behavior, electrical limits, temperature grade, and application requirements.
What is the best cross-brand equivalent for TLV2454ID?
No cross-brand drop-in equivalent has been established for the TLV2454ID with enough confidence to guarantee pin-level and parametric compatibility. A suitable cross-brand candidate must provide four amplifiers in a 14-pin SOIC while matching the 2.7 V to 6 V supply range, rail-to-rail behavior, and application-critical current and noise specifications. Use a manufacturer cross-reference service to identify candidates, then validate the selected device against its complete datasheet.
Where can I buy TLV2454ID online and what is its price?
The TLV2454ID is available from authorized supply channels, but the current commercial quote should be obtained through the Request a Quote form on this page rather than from static price text. The form is the appropriate route for confirming unit availability, quantity breaks, lead time, and the correct 14-pin SOIC ordering suffix. Price and stock can change with demand, so request a quote for the exact manufacturer part number and required quantity.
What is the lead time for TLV2454ID?
Lead time depends on the requested quantity, current inventory, and the approved supply channel, so obtain the current schedule through the Request a Quote form on this page. Include the required quantity, target date, and whether unopened factory packaging is required. The Texas Instruments product page and manufacturer ordering information remain the authoritative references for the device configuration and lifecycle designation.
Is TLV2454ID in stock?
Current TLV2454ID inventory should be confirmed through the Request a Quote form on this page. Provide the required quantity and packaging preference so the quotation can reflect available factory stock and replenishment timing. Because inventory is transactional and changes rapidly, an earlier stock statement should not be treated as a guaranteed allocation.

داده‌های مرجع مهندسی برای TLV2454ID — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the TLV2454ID when a quad amplifier design is constrained by supply voltage and battery life. Its 23 µA per-channel current is substantially lower than the 200 µA per channel associated with the TLV2464AID, while 220 kHz bandwidth is sufficient for many slow sensor and instrumentation signals. Select TLV2454AIDG4 when the same electrical core and SOIC-14 footprint are needed with the alternative ordering or grade designation. Choose TLV2455IDR when the design benefits from about 1 MHz bandwidth but can accommodate the feature and condition differences. The TLV2464AID is appropriate when speed matters more than micropower consumption. Before any substitution, verify power-supply limits, input and output common-mode behavior, offset, noise, slew rate, load drive, temperature grade, and exact pin functions against the manufacturer datasheet.

مقایسه با جایگزین‌ها

پارامتر این محصول TLV2454AIDG4 TLV2455IDR TLV2464AID
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package SOIC-14 SOIC-14 - same SOIC-14 - same SOIC-14 - same
Number of Amplifiers 4 channels 4 channels 4 channels 4 channels
Quiescent Current per Channel 23 µA 23 µA 23 µA 200 µA
Gain-Bandwidth Product 220 kHz 220 kHz 1 MHz 10 MHz

تفاوت‌های کلیدی

  • Lower quiescent-current family option (در مقابلTLV2464AID)
  • Same-family replacement preserves core performance (در مقابلTLV2454AIDG4)
  • Higher bandwidth option remains package-compatible (در مقابلTLV2455IDR)

یادداشت‌های طراحی

Place the V+ and V- bypass capacitors close to their respective SOIC-14 supply pins, with short ground returns and minimal loop area. Use a common ground plane unless the circuit requires an isolated return. Keep sensitive input nodes away from supply and output routing, especially when the TLV2454ID amplifies microvolt-level signals; high-impedance traces can otherwise couple output and switching noise back into the input.

Estimated: four channels operating at the specified 23 µA quiescent current draw 92 µA before load current. Add output current, bias-network current, and regulator losses to determine total supply demand. For a 3 V system, the four-channel static amplifier power is approximately 0.28 mW. These values are design estimates based on the 3 V rail and 23 µA per-channel specification, not maximum-current or operating-condition guarantees.

Do not interpret rail-to-rail input as unlimited input range. At the extremes of the 2.7 V to 6 V supply range, the input common-mode behavior changes, and the listed -3 V to -1.35 V and 1.35 V to 3 V ranges require careful interpretation against the selected supply. Likewise, confirm the 10 mA output-drive capability before driving a load and verify capacitive-load stability for the chosen gain and feedback network.

اطلاعات انطباق

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The component listing identifies the TLV2454ID as RoHS compliant. No explicit REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement was identified.

جستجوهای مرتبط

TLV2454ID datasheet TLV2454ID pinout TLV2454ID datasheet pdf TLV2454ID specifications TLV2454ID equivalent TLV2454ID replacement TLV2454ID cross reference TLV2454ID price TLV2454ID stock Texas Instruments TLV2454ID TLV2454ID 23uA 220kHz TLV2454ID SOIC-14 amplifier TLV2454ID vs TLV2464AID TLV2454ID sensor application

قطعات و اصطلاحات مرتبط

Texas Instruments TLV2454ID TLV2454AIDG4 TLV2455IDR TLV2464AID Operational amplifier Quad amplifier Rail-to-rail input Rail-to-rail output RRIO Micropower amplifier Low-dropout Semiconductor SOIC-14 SOIC family Surface mount SMD 2.7 V to 6 V supply 23 µA quiescent current 220 kHz gain-bandwidth product 20 µV offset voltage 49 nV/√Hz input noise 110 V/ms slew rate RoHS
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ