Texas Instruments
TPS7A4701RGWR - 1A, 35V Ultra-Low Noise LDO | Texas Instruments
MPN: TPS7A4701RGWR ✓ فعال
1.4 V to 34 V Vdss
1 A Id
31.4 C/W Rds(on)
VQFN-20 (RGW) 5x5 mm Package
از $3.2467
USD / واحد
حداقل سفارش: 1 |
قیمت به‌روزرسانی شد: 2026-09-02
قیمت‌گذاری عمده
| تعداد | قیمت واحد | قیمت کل |
|---|---|---|
| 1 | $3.2467 | $3.25 |
ℹ️ همه قیمت‌ها به USD هستند
TPS7A4701RGWR نمای کلی
The Texas Instruments TPS7A4701RGWR is an ultra-low-noise, high-PSRR LDO linear regulator delivering up to 1A output current in a 20-pin VQFN (RGW) package with exposed thermal pad. It features an adjustable output voltage range of 1.4V to 34V and supports input voltages from 3V to 35V.
Key features include 4.17 uVrms output noise (20 Hz to 100 kHz), 72 dB PSRR at 1 kHz, and a low dropout voltage of 200 mV at full 1A load. The device also offers 6.4 mA quiescent current, an active-high enable pin for power sequencing, and thermal shutdown protection. The VQFN-20 package provides a thermal resistance of 31.4 C/W, enabling compact designs without external heatsinking at moderate power levels.
The TPS7A4701 utilizes a bipolar architecture with a precision bandgap reference, achieving noise performance comparable to discrete reference designs while maintaining regulator simplicity. The high PSRR minimizes ripple from upstream switching converters, making it suitable for noise-sensitive analog and RF signal chains where clean power rails are critical.
Typical applications include high-end audio DAC power supplies, PLL/VCO power rails in RF transceivers, precision ADC/DAC reference buffering, and test and measurement instrumentation. The wide input range also supports industrial 24V bus systems with adequate headroom.
When designing with this device, ensure adequate input-to-output voltage headroom to maintain regulation under all load conditions. The enable pin allows sequential power-up in multi-rail systems, which is essential for processors requiring specific rail sequencing.
Key features include 4.17 uVrms output noise (20 Hz to 100 kHz), 72 dB PSRR at 1 kHz, and a low dropout voltage of 200 mV at full 1A load. The device also offers 6.4 mA quiescent current, an active-high enable pin for power sequencing, and thermal shutdown protection. The VQFN-20 package provides a thermal resistance of 31.4 C/W, enabling compact designs without external heatsinking at moderate power levels.
The TPS7A4701 utilizes a bipolar architecture with a precision bandgap reference, achieving noise performance comparable to discrete reference designs while maintaining regulator simplicity. The high PSRR minimizes ripple from upstream switching converters, making it suitable for noise-sensitive analog and RF signal chains where clean power rails are critical.
Typical applications include high-end audio DAC power supplies, PLL/VCO power rails in RF transceivers, precision ADC/DAC reference buffering, and test and measurement instrumentation. The wide input range also supports industrial 24V bus systems with adequate headroom.
When designing with this device, ensure adequate input-to-output voltage headroom to maintain regulation under all load conditions. The enable pin allows sequential power-up in multi-rail systems, which is essential for processors requiring specific rail sequencing.
جایگزین‌های drop-in برای TPS7A4701RGWR — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای TPS7A4701RGWR (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Input Voltage Range, Output Voltage Range, Package, RoHS Status.
Intel
Input Voltage Range: 2.2 V to 6 V
Output Voltage Range: 0.8 V to 5 V (adjustable)
Package: 10-DFN (3x3 mm), Pb-Free
مقایسه با TPS7A4701RGWR →
ابزار مقایسه سریع — قطعات جایگزین را برای مقایسه کنار به کنار انتخاب کنید:
TPS7A4700RGWR
Texas Instruments
Positive, adjustable (ANY-OUT programmable) · 1.4 V to 20.5 V (ANY-OUT via PCB layout) · 1 A · 3 V to 36 V · 4.17 uVRMS (20 Hz to 100 kHz)
✗ ناموجود
$3.6591 / واحد
مشاهده دیتاشیت ←TPS7A4701RGWR-Q1
same die/package, AEC-Q100 automotive grade
📋 جایگزین مرجع (خارج از کاتالوگ)
TPS7A4701RGWT
same die, tape and reel packaging variant
📋 جایگزین مرجع (خارج از کاتالوگ)
TPS7A4701RGWR حداکثر مقادیر مجاز و مشخصات الکتریکی
| نوع خروجی | Adjustable |
| محدوده ولتاژ خروجی | 1.4 V to 34 V |
| حداکثر جریان خروجی | 1 A |
| محدوده ولتاژ ورودی | 3 V to 35 V |
| ولتاژ افت | 200 mV at 1 A |
| نویز خروجی | 4.17 uVrms (20 Hz to 100 kHz) |
| PSRR | 72 dB at 1 kHz |
| جریان سکون | 6.4 mA |
| مقاومت حرارتی | 31.4 C/W |
| دمای کاری | -40C to +125C |
| بسته‌بندی | VQFN-20 (RGW) 5x5 mm |
| نوع نصب | Surface Mount |
| سطح MSL | 2 (1 year) |
| وضعیت RoHS | Compliant |
| پین فعال‌سازی | Yes (active-high) |
پیکربندی پین TPS7A4701RGWR
| پین 1 | OUT — Regulated output voltage |
| پین 2 | OUT — Regulated output voltage |
| پین 3 | OUT — Regulated output voltage |
| پین 4 | OUT — Regulated output voltage |
| پین 5 | GND — Ground |
| پین 6 | EN — Enable (active high) |
| پین 7 | IN — Input supply |
| پین 8 | IN — Input supply |
| پین 9 | IN — Input supply |
| پین 10 | IN — Input supply |
| پین 11 | NR/SS — Noise reduction/soft-start |
| پین 12 | FB — Feedback |
| پین 13 | GND — Ground |
| پین 14 | GND — Ground |
| پین 15 | GND — Ground |
| پین 16 | GND — Ground |
| پین 17 | GND — Ground |
| پین 18 | GND — Ground |
| پین 19 | GND — Ground |
| پین 20 | GND — Ground |
کاربردهای معمول
TPS7A4701RGWR مناسب است برای 6 کاربردs: High-End Audio DAC Power Supply, RF Transceiver Power Supply, Precision ADC Reference Buffer, Test and Measurement Instrumentation, Industrial 24V Bus Systems, Portable Medical Devices.
High-End Audio DAC Power Supply
Provides clean 5V rail for audio DACs with 4.17uVrms noise.
پیشنهادی
RF Transceiver Power Supply
Supplies low-noise power to PLL/VCO circuits in RF transceivers.
پیشنهادی
Precision ADC Reference Buffer
Buffers reference voltage for precision ADCs with low noise.
پیشنهادی
Test and Measurement Instrumentation
Provides clean power rails for sensitive measurement circuits.
پیشنهادی
Industrial 24V Bus Systems
Regulates 24V industrial bus down to low-noise rails for sensors and controllers.
پیشنهادی
Portable Medical Devices
Provides low-noise power for battery-operated medical monitoring equipment.
پیشنهادی
خلاصه محصولات پیشنهادی
PCM1794A
DAC requiring low-noise power استفاده‌شده در: High-End Audio DAC Power Supply
OPA1612
I/V converter op-amp استفاده‌شده در: High-End Audio DAC Power Supply
LMX2594
PLL synthesizer needing clean supply استفاده‌شده در: RF Transceiver Power Supply
TRF37B32
RF amplifier استفاده‌شده در: RF Transceiver Power Supply
ADS8881
18-bit SAR ADC استفاده‌شده در: Precision ADC Reference Buffer
REF5025
Voltage reference استفاده‌شده در: Precision ADC Reference Buffer
ADS1262
Texas Instruments استفاده‌شده در: Test and Measurement Instrumentation
OPA2188
Zero-drift op-amp استفاده‌شده در: Test and Measurement Instrumentation
MSP430FR5969
Low-power MCU استفاده‌شده در: Industrial 24V Bus Systems
ISO7741
Digital isolator استفاده‌شده در: Industrial 24V Bus Systems
ADS1292R
ECG front-end استفاده‌شده در: Portable Medical Devices
MSP432P401R
MCU استفاده‌شده در: Portable Medical Devices
What is the output voltage range of TPS7A4701?
The TPS7A4701 adjustable version outputs from 1.4V to 34V using external resistor dividers. According to TI datasheet SBOS708B, the output is set by two external resistors with the formula VOUT = 1.4V * (1 + R1/R2).
Does TPS7A4701 require a heatsink at 1A output?
At VIN=12V, VOUT=5V, and 1A load, the TPS7A4701 dissipates approximately 7W of power. With a thermal resistance of 31.4 C/W (theta_JA), the junction temperature would rise 220C above ambient. A heatsink or substantial copper pour (at least 1 square inch) is required for reliable operation above 2-3W dissipation.
What is the difference between TPS7A4701 and TPS7A4700?
The TPS7A4701 includes an active-high enable pin for power sequencing, while the TPS7A4700 does not have an enable pin. Both share identical noise (4.17 uVrms) and PSRR (72 dB at 1 kHz) specifications and the same VQFN-20 (RGW) package, making them drop-in replacements.
What is the output noise of TPS7A4701?
The TPS7A4701 has an output noise of 4.17 uVrms over the 20 Hz to 100 kHz bandwidth. This makes it suitable for noise-sensitive applications such as audio DACs, RF synthesizers, and precision ADC references.
Can TPS7A4701 be used for audio applications?
Yes, the TPS7A4701 is ideal for audio DAC power supplies due to its 4.17 uVrms ultra-low noise and 72 dB PSRR at 1 kHz. These specifications ensure clean power rails that do not introduce audible noise or interference into the audio signal path.
What is the input voltage range of TPS7A4701?
The TPS7A4701 operates with an input voltage range from 3V to 35V. This wide range allows it to be used in various applications, including industrial 24V bus systems and battery-powered devices.
What is the dropout voltage of TPS7A4701?
The TPS7A4701 has a low dropout voltage of 200 mV at full 1A load. This low dropout allows efficient regulation even when the input voltage is close to the output voltage, reducing power dissipation.
Is TPS7A4701 available in automotive grade?
The standard TPS7A4701RGWR is not AEC-Q100 qualified. However, the TPS7A4701RGWR-Q1 variant is AEC-Q100 qualified for automotive applications, sharing the same VQFN-20 (RGW) package and pinout.
What is the quiescent current of TPS7A4701?
The TPS7A4701 has a quiescent current of 6.4 mA. This relatively low quiescent current helps maintain efficiency in battery-powered applications while providing high performance.
What is the PSRR of TPS7A4701?
The TPS7A4701 achieves a PSRR of 72 dB at 1 kHz. This high power supply rejection ratio minimizes ripple from upstream switching converters, making it ideal for noise-sensitive analog and RF circuits.
What is the package of TPS7A4701?
The TPS7A4701 is available in a 20-pin VQFN (RGW) package measuring 5x5 mm with an exposed thermal pad. This compact package is suitable for space-constrained designs and provides good thermal performance.
What is the operating temperature range of TPS7A4701?
The TPS7A4701 operates over a temperature range of -40C to +125C. This wide range makes it suitable for industrial and automotive environments where extreme temperatures are common.
Does TPS7A4701 have thermal shutdown protection?
Yes, the TPS7A4701 includes thermal shutdown protection. This feature prevents damage from overheating by shutting down the regulator when the junction temperature exceeds safe limits.
What is the MSL level of TPS7A4701?
The TPS7A4701 has an MSL (Moisture Sensitivity Level) of 2, with a floor life of 1 year. This indicates the component can be stored for up to one year before soldering, provided it is kept in a dry environment.
Is TPS7A4701 RoHS compliant?
Yes, the TPS7A4701 is RoHS compliant. This ensures it meets the European Union's restrictions on hazardous substances, making it suitable for use in consumer and industrial products.
داده‌های مرجع مهندسی برای TPS7A4701RGWR — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
Choose TPS7A4701RGWR when you need a positive-output ultra-low-noise LDO with enable pin for power sequencing in industrial or consumer applications. Choose TPS7A4700RGWR if you do not need the enable pin (slight cost savings, same package). Choose TPS7A4701RGWR-Q1 for automotive applications requiring AEC-Q100 qualification. Choose TPS7A4701RGWT if you prefer a different tape and reel ordering option, but note it is electrically identical. All parts share the same VQFN-20 (RGW) package footprint, enabling PCB layout reuse across variants.
مقایسه با جایگزین‌ها
| پارامتر | این محصول | TPS7A4700RGWR | TPS7A4701RGWR-Q1 | TPS7A4701RGWT |
|---|---|---|---|---|
| Package | VQFN-20 (RGW) | VQFN-20 (RGW) - same | VQFN-20 (RGW) - same | VQFN-20 (RGW) - same |
| Output Current | 1 A | 1 A | 1 A | 1 A |
| Output Voltage Range | 1.4V to 34V | 1.4V to 34V | 1.4V to 34V | 1.4V to 34V |
| Enable Pin | Yes (active-high) | No | Yes (active-high) | Yes (active-high) |
| Automotive Grade | No | No | Yes (AEC-Q100) | No |
| Output Noise | 4.17 uVrms | 4.17 uVrms | 4.17 uVrms | 4.17 uVrms |
| PSRR at 1 kHz | 72 dB | 72 dB | 72 dB | 72 dB |
| Quiescent Current | 6.4 mA | 6.4 mA | 6.4 mA | 6.4 mA |
تفاوت‌های کلیدی
- Only VQFN-20 family member with enable pin (در مقابلTPS7A4700RGWR)
- Automotive grade option available (در مقابلTPS7A4701RGWR-Q1)
- Tape and reel packaging variant (در مقابلTPS7A4701RGWT)
یادداشت‌های طراحی
At VIN=12V, VOUT=5V, and 1A load, power dissipation is 7W. The VQFN-20 package has theta_JA of 31.4 C/W, resulting in a 220C junction temperature rise. A heatsink or at least 1 square inch of copper pour is required for reliable operation above 2W dissipation.
Place input and output capacitors as close to the IC pins as possible. Use a 10uF ceramic capacitor on the input and a 10uF ceramic capacitor on the output. Add a 0.1uF ceramic capacitor in parallel for high-frequency noise bypass.
Do not exceed the maximum input voltage of 35V. Ensure the external resistor divider uses 1% or better tolerance resistors to maintain output voltage accuracy. The NR/SS capacitor controls startup time and noise bandwidth - do not omit it.
اطلاعات انطباق
RoHS
Compliant
REACH
Compliant
AEC-Q100
بدون سرب
بدون هالوژن
مواد معدنی درگیری
Compliant
RoHS compliant per TI product page. Not AEC-Q100 qualified - choose TPS7A4701RGWR-Q1 for automotive.
تاریخ تأیید داده‌ها: 2026-08-17
— داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است
جستجوهای مرتبط
TPS7A4701RGWR
TPS7A4701 datasheet
Texas Instruments TPS7A4701
ultra low noise LDO 1A 35V
VQFN-20 LDO regulator
TPS7A4701 audio DAC power supply
TPS7A4701 vs TPS7A4700
TPS7A4701 drop-in replacement
TPS7A4701RGWR buy price
what is the output noise of TPS7A4701
TPS7A4701 pinout VQFN-20
low noise voltage regulator RF application
قطعات و اصطلاحات مرتبط
Texas Instruments
TPS7A4701
TPS7A4701RGWR
TPS7A4700RGWR
TPS7A4701RGWR-Q1
TPS7A4701RGWT
LDO
linear regulator
PSRR
VQFN-20
RoHS
AEC-Q100
audio DAC
RF power supply
bandgap reference
thermal shutdown
enable pin
راهنماهای فنی مرتبط
TPS7A4701RGWR: Complete Guide to TI's 1A, 35V Ultra-Low Noise LDO Regulator
TPS7A4701RGWR: TI's 1A ultra-low noise LDO with 4.17 uVrms noise, 72 dB PSRR, 3-35V input, VQFN-20. In stock, $3.2467 as of 2026-09-02.
6 دقیقه مطالعه
TPS7A4700RGWR: 36V 1A Ultralow-Noise LDO — Complete Engineer's Guide, Specs, and Alternatives
TPS7A4700RGWR: TI 36V-input, 1A LDO with 4.17 µVRMS noise, ANY-OUT programming 1.4–20.5V, VQFN-20. In stock now at XAIPART.
8 دقیقه مطالعه
1 / 1