STMicroelectronics

TS3022ID - Dual High-Speed Rail-to-Rail Comparator | STMicroelectronics

MPN: TS3022ID ✓ فعال
2 V to 5 V Vdss 0.3 µA maximum Id 8-SOIC Package
حداقل سفارش: 1 |

TS3022ID نمای کلی

The STMicroelectronics TS3022ID is a dual high-speed comparator with rail-to-rail input stages, push-pull outputs, and operation from 2 V to 5 V supply voltage. The device is specified for a wide -40 °C to +125 °C temperature range and is packaged in an 8-SOIC package. Each comparator channel provides independent inputs and a push-pull output, making the TS3022ID suitable for dual-threshold, window-detection, line-driver, and signal-conditioning applications.

A comparator is an analog integrated circuit that compares two input voltages and changes its output state when one input becomes higher than the other. The TS3022 belongs to the comparator hierarchy within analog and mixed-signal semiconductors, where its low supply-voltage operation and rail-to-rail inputs help simplify designs operating from 2 V to 5 V rails. Rail-to-rail input behavior is especially useful when the signal range approaches either supply rail, while the high-speed response supports applications requiring rapid threshold decisions.

The TS3022ID is identified as a general-purpose dual comparator with push-pull outputs. Its specified supply range is 2 V to 5 V, and the datasheet describes a high-speed response time. The TS3022 family is designed for micropower operation, with supply consumption described as being as low as a few tens of microamperes. The operating temperature range of -40 °C to +125 °C supports use across industrial, automotive, and consumer temperature conditions when the surrounding system satisfies the device's electrical requirements.

The rail-to-rail input architecture allows sensing of signals close to the positive or negative supply rails. This can reduce the need for artificial input biasing in low-voltage systems, although input common-mode behavior, output timing, and supply decoupling still require careful validation in the final application. Because the device contains two comparators, applications can use the two channels for independent decisions or for upper and lower thresholds that define a monitoring window.

Typical uses include battery-voltage threshold detection, overvoltage and undervoltage indication, signal crossing detection, pulse-width qualification, sensor-level conditioning, and fast logic-level generation. The 8-SOIC package is also convenient for prototypes and through-hole assembly. For battery-powered equipment, the low operating voltage and micropower characteristics can help reduce system energy use, provided the input signals remain within the specified common-mode range.

Designers should place supply bypass capacitance close to the device and use the pin descriptions in the manufacturer datasheet when assigning PCB tracks. Input filtering may be required when noisy signals are compared because propagation delay and input offset can cause repeated output transitions. The TS3022ID is therefore most appropriate when a designer needs two fast, low-voltage, rail-to-rail comparator channels in a conventional SOIC footprint.

جایگزین‌های drop-in برای TS3022ID — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

TS3022IDT

✅ جایگزین مستقیم
📦 8-SOIC
Same dual-comparator TS3022 family and 8-SOIC format; ordering suffix differs with no quantified electrical change stated in the cross-reference data.

📋 جایگزین مرجع (خارج از کاتالوگ)

TS3022IST

✅ جایگزین مستقیم
📦 8-SOIC
Same dual-comparator TS3022 family and 8-SOIC format; ST suffix denotes a distinct ordering option, with no quantified electrical difference stated.

📋 جایگزین مرجع (خارج از کاتالوگ)

TS3022IYST

✅ جایگزین مستقیم
📦 8-SOIC
Same dual-comparator TS3022 family and 8-SOIC format; automotive-oriented suffix differs, with qualification conditions requiring separate review.

📋 جایگزین مرجع (خارج از کاتالوگ)

TS3022ID حداکثر مقادیر مجاز و مشخصات الکتریکی

Comparator Type General-purpose dual comparator
Number of Channels 2 channels
Supply Voltage Range 2 V to 5 V
Input Type Rail-to-rail input
نوع خروجی Push-pull
محدوده دمای کاری -40 °C to +125 °C
Input Offset Voltage 10 mV maximum
Average Input Bias Current 0.3 µA maximum
جریان سکون A few tens of µA
بسته‌بندی 8-SOIC
نوع نصب Surface mount
Lead-Free / Terminal Finish Nickel-palladium-gold terminal finish

راهنمای پیکربندی پین TS3022ID 8-soic

پیکربندی پین برای TS3022ID (پکیج 8-soic). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 8-soic برای TS3022ID

داده پین‌آوت تفصیلی موجود نیست برای TS3022ID.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

TS3022ID مناسب است برای 6 کاربردs: Battery Voltage Monitoring, Overvoltage and Undervoltage Protection, Sensor Signal Conditioning, Fast Signal Crossing Detection, Pulse Width Qualification, Portable Device Level Detection.

⚡

Battery Voltage Monitoring

The TS3022ID is well suited to detecting upper and lower battery-voltage thresholds because its two comparator channels operate from a 2 V to 5 V supply and accept rail-to-rail inputs. One channel can monitor the battery against a high threshold while the other detects a low threshold, allowing a controller input to identify an overvoltage or undervoltage condition. The 8-SOIC package simplifies assembly in industrial and portable systems, while rail-to-rail sensing improves utilization of a low-voltage signal range. Hysteresis should be added around the switching thresholds to prevent repeated output transitions when the battery voltage slowly changes. The push-pull outputs can directly drive a digital input or logic gate when voltage-level compatibility is confirmed.

🏭

Overvoltage and Undervoltage Protection

The TS3022ID can implement independent overvoltage and undervoltage supervision with its two rail-to-rail comparator channels. The 2 V minimum supply supports low-energy systems, and the specified -40 °C to +125 °C range provides useful temperature coverage for industrial equipment. Each channel compares an adjusted input against a reference voltage and produces a push-pull logic result for downstream control. Input dividers should be calculated for the full monitored range, with resistor tolerance and input offset voltage included in the threshold error budget. Positive feedback can introduce controlled hysteresis and avoid chatter around the protection boundary. The dual-channel arrangement also reduces the number of separate comparator footprints compared with two discrete single-channel devices.

🧩

Sensor Signal Conditioning

The TS3022ID can convert a sensor or conditioned analog signal into a fast digital threshold event using its rail-to-rail input stage. It is useful when a sensor output crosses a known level and the system needs a clean logic indication rather than continuous analog measurement. The high-speed response supports rapid threshold crossing, while the push-pull output provides a strong driven state suitable for digital inputs or control logic. Place the sensor and comparator paths to minimize coupling from switching nodes, and add filtering only where the required response time permits. With two channels, the same device can monitor one sensor against an upper threshold and another against a lower threshold, reducing board area in compact sensing modules.

🌐

Fast Signal Crossing Detection

The TS3022ID is appropriate for detecting when an analog waveform crosses a threshold, because the family is specified for high-speed response and rail-to-rail input operation. A divided input can be compared with a stable reference, creating a binary transition at a defined crossing point. The push-pull output can then trigger capture logic, interrupt a controller, or inhibit a downstream stage. Keep the reference source low impedance and minimize parasitic capacitance on the input node to preserve edge timing. If noisy or slow-moving signals are compared, intentional hysteresis is necessary to prevent repeated transitions. The dual comparator package can handle two related crossings without requiring two separate IC footprints.

🖥️

Pulse Width Qualification

Two TS3022ID channels can support pulse-width qualification by defining a lower crossing and an upper crossing and combining the resulting comparator states in external logic. The rail-to-rail inputs help detect signals that occupy much of the 2 V to 5 V supply range, while the high-speed response supports short events. The design must account for propagation delay and reference timing when pulses approach the qualification window, so validate timing over process, voltage, and temperature. Add hysteresis or use a small amount of controlled feedback to prevent retriggering near each threshold. The 8-SOIC package is convenient for timing and industrial control boards that already use through-hole-compatible assembly methods.

📱

Portable Device Level Detection

The TS3022ID can supervise a portable device's internal rail or battery condition while consuming only a few tens of microamperes according to the manufacturer family description. Its 2 V minimum supply supports operation from low-energy rails, and the two channels can monitor separate system conditions without requiring two comparator packages. The rail-to-rail input range allows direct sensing near the supply limits when divider scaling is appropriate. For battery systems, output transitions should be interpreted cautiously during supply collapse because dynamic behavior near the lower operating limit can differ from steady-state specifications. A quote request can establish current availability for the exact ordering suffix and required delivery quantity.

What is the TS3022ID?
The TS3022ID is an STMicroelectronics dual, general-purpose comparator with rail-to-rail inputs and push-pull outputs. According to the manufacturer datasheet, it operates from a 2 V to 5 V supply and is specified over -40 °C to +125 °C. Both comparator channels are integrated in an 8-SOIC package, making it suitable for dual-threshold and signal-crossing designs.
What are the key specifications of TS3022ID that engineers should know?
The TS3022ID provides two comparator channels, rail-to-rail inputs, push-pull outputs, a 2 V to 5 V supply range, and an operating temperature range of -40 °C to +125 °C. The manufacturer describes the device as a high-speed, micropower comparator with input offset voltage up to 10 mV and average input bias current up to 0.3 µA. Its 8-SOIC package is suitable for surface-mount assembly.
Where can I download the TS3022ID datasheet PDF?
The official TS3022 datasheet PDF is available from STMicroelectronics at https://www.st.com/resource/en/datasheet/ts3022.pdf. It contains the TS3022 family electrical characteristics, pin descriptions, typical performance curves, and application information. Use the manufacturer document for final schematic, layout, and component-selection decisions, including pin numbering for the 8-SOIC package.
Where can I find the TS3022ID pinout?
The TS3022ID pinout is shown in the pin-description section of the official STMicroelectronics TS3022 datasheet. The package is an 8-SOIC containing two complete comparator channels, with the datasheet also identifying supply pins and push-pull output pins. Assign PCB tracks directly from that table rather than inferring a generic dual-op-amp pinout.
What supply voltage does the TS3022ID require?
The TS3022ID operates from 2 V to 5 V. According to the STMicroelectronics datasheet, the supply voltage is specified across this range while the device maintains rail-to-rail input capability and an operating temperature range of -40 °C to +125 °C. The actual design should maintain the supply within the datasheet limits during startup, transients, and normal operation.
Is the TS3022ID suitable for low-voltage threshold detection?
Yes, the TS3022ID is suitable for low-voltage threshold detection because it operates from 2 V to 5 V and accepts rail-to-rail inputs. Its two independent channels can implement separate upper and lower thresholds or two separate signal comparisons. Add hysteresis where repeated switching at the threshold would otherwise cause output chatter.
What can replace the TS3022ID?
The closest same-family drop-in candidates are the TS3022IDT, TS3022IST, and TS3022IYST, all associated with the TS3022 dual-comparator family and 8-SOIC format. Their ordering, temperature, or automotive suffixes must still be checked against the required production conditions. Cross-brand replacement should not be assumed from a generic comparator description because input common-mode range and output behavior must match.
Is TS3022ID the same as TS3022IDT?
TS3022ID and TS3022IDT are versions of the same STMicroelectronics TS3022 dual comparator family in the same 8-SOIC format, but the ordering suffix identifies different ordering or temperature-grade options. They are not automatically interchangeable in every application. Confirm the exact temperature range, production status, and device marking before releasing either part into a BOM.
What is the best STMicroelectronics equivalent for TS3022ID?
TS3022IDT is the closest STMicroelectronics family alternative for an existing TS3022ID socket because it retains the dual-comparator architecture and 8-SOIC format. TS3022IST and TS3022IYST provide additional same-family ordering choices. The suffix determines the relevant ordering or qualification conditions, so select the variant that meets the application's temperature and reliability requirements.
TS3022ID vs TS3022IDT: which is better for a new design?
Choose the suffix that matches the required production and temperature conditions rather than selecting solely by electrical similarity. Both parts use the TS3022 dual-comparator family and 8-SOIC package, but TS3022IDT has a different ordering suffix and may correspond to a different orderable temperature option. Verify the current device page and datasheet ordering information before selection.
When should I choose TS3022ID instead of TS3022IDT?
Choose TS3022ID when its exact ordering suffix, temperature grade, qualification requirements, and lifecycle status fit the design. Choose TS3022IDT when that ordering option is required by the manufacturer or better matches the intended temperature range. Since both use the same family architecture and package, the decision should be based on ordering conditions rather than a PCB redesign.
How much current does the TS3022ID consume?
The TS3022ID is described by STMicroelectronics as a micropower dual comparator whose consumption can be as low as a few tens of microamperes. The exact current depends on supply voltage and operating conditions, so use the manufacturer datasheet's typical and maximum values for the selected configuration. Include output-state and load effects when calculating a complete power budget.
Does TS3022ID support automotive temperature grades?
The TS3022ID operating range of -40 °C to +125 °C is suitable for many harsh operating environments, but temperature range alone does not establish AEC-Q100 qualification. Use the qualified TS3022IYST ordering option when an AEC-Q100-grade part is specifically required. Confirm qualification and production status with the manufacturer for the exact suffix.
How do I design a hysteresis circuit with TS3022ID?
Use one TS3022ID channel as the reference comparator and add positive feedback from its push-pull output to the non-inverting input to create hysteresis. The feedback amount determines the switching separation and must remain stable over temperature and supply variation. The manufacturer datasheet should be used to confirm input common-mode limits and output behavior around the switching point.
Where to buy TS3022ID online and what is its lead time?
Use the Request a Quote form on this XAIPART page to ask for TS3022ID availability, current lead time, and order quantity. The part is offered as an 8-SOIC dual comparator by STMicroelectronics, but production status and delivery timing can change. Provide your required quantity, date code needs, and destination so the request can be answered accurately.
What is the price of TS3022ID?
The current TS3022ID quotation is generated through the Request a Quote form on this XAIPART page. The form allows the requested quantity and delivery requirements to be included in the offer without publishing a potentially stale unit figure. Use the official TS3022 product page and datasheet for technical confirmation before placing an order.
Is TS3022ID in stock?
Current TS3022ID inventory should be confirmed through the Request a Quote form on this XAIPART page. The manufacturer product page identifies the TS3022 family, while ordering status and available quantity can vary by package suffix and date code. State the required quantity and acceptable delivery date when requesting the quotation.

داده‌های مرجع مهندسی برای TS3022ID — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose TS3022ID for a new 8-SOIC design that needs two general-purpose, rail-to-rail-input comparator channels operating from 2 V to 5 V. It is particularly useful for paired upper and lower threshold checks, dual signal-crossing detection, and compact low-voltage sensing. Select TS3022IDT when that exact orderable suffix satisfies the production and temperature requirements, or TS3022IST when its ordering conditions are preferred. Choose TS3022IYST when an automotive-oriented ordering option and its associated qualification requirements are required. All listed alternatives retain the TS3022 family architecture and 8-SOIC footprint, so selection should focus on suffix-specific qualification, temperature, lifecycle, and ordering conditions rather than package conversion. Verify the exact suffix against the manufacturer product page and current datasheet before release.

مقایسه با جایگزین‌ها

پارامتر این محصول TS3022IDT TS3022IST TS3022IYST
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Comparator Configuration Dual Dual Dual Dual
Supply Voltage Range 2 V to 5 V 2 V to 5 V 2 V to 5 V 2 V to 5 V
Input Type Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Output Type Push-pull Push-pull Push-pull Push-pull
Operating Temperature Range -40 °C to +125 °C -40 °C to +125 °C -40 °C to +125 °C -40 °C to +125 °C
Ordering Suffix ID IDT IST IYST

تفاوت‌های کلیدی

  • Two independent comparator channels in one package (در مقابلTS3022IDT)
  • Rail-to-rail input operation across a 2 V to 5 V supply (در مقابلTS3022IST)
  • Push-pull outputs with a -40 °C to +125 °C operating range (در مقابلTS3022IYST)

یادداشت‌های طراحی

Route the two comparator inputs as short, guarded traces, especially when the compared signal crosses a threshold rapidly. Keep switching outputs away from reference and high-impedance input nodes to reduce coupling. Place the supply bypass capacitor close to the device's supply and ground pins, and use the pin-description table in the STMicroelectronics datasheet to confirm the 8-SOIC land pattern.

Do not assume that rail-to-rail inputs make every signal condition acceptable. Check common-mode limits across the complete 2 V to 5 V supply range, including startup and transient conditions, and account for the maximum input offset voltage of 10 mV when setting precision thresholds. Add positive-feedback hysteresis when the input can remain near the comparison point, otherwise output chatter may increase system power and propagate false events.

Use a low-impedance reference source and short input routes for fast crossing applications. Filter the input only when the added capacitance will not undermine the required response time. Validate propagation behavior at the lowest expected supply voltage and highest operating temperature, since threshold timing margins can vary across operating conditions even though the TS3022 family is characterized as high speed.

Estimate total power from the 2 V to 5 V supply and the comparator operating current rather than relying only on the few-tens-of-microamperes family description. Account for both channels, output-state current, input bias current, and external load current. Low-power designs should also define behavior during supply ramp-down, when rail-to-rail input and output states may no longer represent valid comparisons.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The cross-reference data identifies a nickel-palladium-gold terminal finish, but it does not explicitly establish RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals status for TS3022ID.

تاریخ تأیید داده‌ها: 2026-11-16 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

TS3022ID datasheet TS3022ID pinout TS3022ID datasheet pdf TS3022ID equivalent TS3022ID replacement TS3022ID cross reference TS3022ID vs TS3022IDT TS3022ID 8-SOIC TS3022ID price TS3022ID stock STMicroelectronics TS3022ID TS3022ID application circuit

قطعات و اصطلاحات مرتبط

STMicroelectronics TS3022ID TS3022IDT TS3022IST TS3022IYST dual comparator comparator analog semiconductor rail-to-rail input push-pull output low-dropout comparator signal crossing detection threshold detection 2 V to 5 V supply 8-SOIC SOIC package family surface mount SMD battery monitoring overvoltage protection sensor signal conditioning propagation delay input offset voltage input bias current hysteresis
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ