Texas Instruments

TUSB215RGYR - USB 2.0 HS Signal Conditioner | Texas Instruments

MPN: TUSB215RGYR ✓ فعال
5 V Vdss VQFN-14 (RGY) Package
حداقل سفارش: 1 |

TUSB215RGYR نمای کلی

The Texas Instruments TUSB215RGYR is a USB 2.0 high-speed signal conditioner with DC boost, an integrated Charging Downstream Port, and VBUS supply capability. It operates from a 5 V supply, supports USB 2.0 high-speed signal conditioning, and is packaged in a 14-pin VQFN RGY package measuring 3.5 mm by 3.5 mm. The device is intended to compensate for channel-related signal loss and help improve USB electrical compliance.

A USB high-speed signal conditioner is an interface IC placed within a USB differential data path. It belongs to the USB interface and signal-processing hierarchy, where conditioning components address attenuation, edge distortion, and signal integrity before data reaches a host, device, hub, or cable assembly. Unlike a protocol controller, the TUSB215 does not interpret USB transactions; it reshapes the physical-layer signal traveling across the differential pair.

The principal features of the TUSB215 include USB 2.0 high-speed operation, DC boost capability, an integrated CDP function, VBUS supply support, and a 14-pin VQFN package. Its operating-temperature range is 0 °C to 70 °C. DC boost compensates for voltage loss encountered in a lossy channel, while the integrated charging function supports downstream-port behavior within compatible USB charging designs.

Signal integrity is the central design consideration for this device. TI specifies a 90 Ω differential impedance target for the complete USB high-speed signal path and directs designers to follow high-speed routing guidelines. Differential traces should therefore be length matched, continuously referenced, and routed away from noise-producing or discontinuous structures. Placement close to the source of degradation can provide more effective compensation than placement near the far endpoint.

Typical uses include USB 2.0 host-to-device links, hub connections, peripheral docking systems, cable assemblies, and test equipment that needs channel-loss compensation. The TUSB215 is also relevant to boards that require a CDP function within a compact interface subsystem. Designers must still validate the complete USB channel against applicable electrical compliance requirements because component insertion alone does not guarantee system compliance.

Thermal and layout planning should begin with the exposed-pad VQFN footprint. Place the input, output, and bypass capacitors close to their associated pins, provide a continuous ground reference, and follow the manufacturer land pattern for exposed-pad soldering. The 3.5 mm by 3.5 mm package supports compact designs, but its small thermal area requires careful copper and return-path construction.

This product page combines the device function, package information, application guidance, verified source links, and practical implementation considerations in one engineering-focused reference. It also identifies where electrical details require confirmation in the manufacturer datasheet before a PCB or compliance test is released.

جایگزین‌های drop-in برای TUSB215RGYR — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای TUSB215RGYR (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Product Type.

Texas Instruments
Product Type: USB 2.0 high-speed redriver with DC boost
مقایسه با TUSB215RGYR →

TUSB213RGYR

✅ جایگزین مستقیم
Texas Instruments
📦 VQFN-14 (RGY), 3.5 mm x 3.5 mm
USB 2.0 high-speed redriver with DC boost · USB 2.0, OTG 2.0, and BC 1.2 · 480 Mbit/s · 1 channel · Low-speed, full-speed, and high-speed · 4.4 V to 5.5 V · 4 selectable settings · Pin strap or I2C

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

TUSB213IRGYT

✅ جایگزین مستقیم
📦 VQFN-14 (RGY), 3.5 mm x 3.5 mm
Uses the same VQFN-14 footprint and USB high-speed signal-conditioning function; integrated charging and supply features differ from the TUSB215 and require schematic verification

📋 جایگزین مرجع (خارج از کاتالوگ)

TUSB213QRGYTQ1

✅ جایگزین مستقیم
📦 VQFN-14 (RGY), 3.5 mm x 3.5 mm
Uses the same VQFN-14 footprint with an automotive-oriented order code; charging functions, temperature grade, and exact pin behavior differ from the TUSB215

📋 جایگزین مرجع (خارج از کاتالوگ)

TUSB215RGYR مشخصات

Product Type USB 2.0 high-speed signal conditioner
USB Data Rate USB 2.0 high speed
ولتاژ تغذیه 5 V
DC Boost Supported
Charging Function Integrated CDP
VBUS Supply Supported
Differential Impedance Target 90 ohm
Package Type VQFN-14 (RGY)
Package Dimensions 3.5 mm x 3.5 mm
تعداد پایه 14 pins
Exposed Pad Present
دمای کاری 0 °C to 70 °C
نوع نصب Surface mount
Signal Processing Compensation for ISI signal loss
Compliance Objective Help passing USB electrical compliance tests

راهنمای پیکربندی پین TUSB215RGYR 3.5 mm x 3.5 mm

پیکربندی پین برای TUSB215RGYR (پکیج 3.5 mm x 3.5 mm). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 3.5 mm x 3.5 mm برای TUSB215RGYR

داده پین‌آوت تفصیلی موجود نیست برای TUSB215RGYR.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

TUSB215RGYR مناسب است برای 6 کاربردs: USB 2.0 Host-to-Peripheral Links, USB Hub Expansion Boards, USB Docking Stations, USB Cable and Dongle Assemblies, USB Compliance Test Equipment, USB Charging-Aware Peripherals.

🔌

USB 2.0 Host-to-Peripheral Links

The TUSB215RGYR fits USB 2.0 high-speed paths in which connector launches, cable transitions, or long PCB routes degrade the differential signal. Its DC boost capability compensates for reduced signal amplitude, while the signal-conditioning function addresses channel-related ISI distortion. Place the device near the point where meaningful loss has accumulated rather than at the receiver, and maintain 90 Ω differential impedance across the complete route. Validate the completed link with eye measurements because compliance depends on the installed channel, connector, and enclosure.

🌐

USB Hub Expansion Boards

A USB hub PCB can use the TUSB215RGYR on high-speed routes where repeated connector and trace transitions reduce differential-swing quality. The device's DC boost function helps recover signal amplitude, making it useful near a downstream port after the channel's main loss mechanisms. The 3.5 mm by 3.5 mm VQFN package also saves board area in compact hub designs. Keep the high-speed pair impedance-controlled, route over an uninterrupted reference plane, and confirm hub eye masks and electrical compliance with the complete assembled board.

🖥️

USB Docking Stations

Dockings systems often combine exposed connectors, internal cables, adapters, and long PCB routes that can impair USB high-speed signaling. Placing the TUSB215RGYR between the degraded channel and the host receiver can improve signal amplitude and edge quality through DC boost and equalization. Its integrated CDP and VBUS supply support can also simplify compatible charging architectures. The designer should still budget connector clearance, maintain 90 Ω differential routing, and test eye height, rise time, and overshoot across representative dock cable lengths and loading conditions.

🔧

USB Cable and Dongle Assemblies

The TUSB215RGYR is appropriate for compact cable-end or dongle electronics where a long cable or connector assembly introduces USB high-speed loss. The 14-pin VQFN package provides a compact implementation, and DC boost helps compensate for attenuation near the far end of the channel. Because an exposed-pad package requires careful thermal and soldering control, verify assembly reflow capability and provide adequate copper around the pad. Validate the complete cable assembly because connector geometry, strain relief, shielding, and cable construction influence the achieved eye margin.

📟

USB Compliance Test Equipment

Instrumentation that measures USB eye diagrams, jitter, amplitude, and compliance can use the TUSB215RGYR as a controlled conditioning element in a fixture, channel emulator, or test article. Its DC boost behavior makes it useful when the intended test channel includes enough loss to distort a high-speed differential waveform. Because the device adds its own transfer function, measurements must distinguish conditioner behavior from the cable and fixture under test. Characterize the complete measurement path and calibrate it before using corrected amplitude or compliance results.

🔋

USB Charging-Aware Peripherals

The TUSB215RGYR can support USB peripheral designs that need high-speed data conditioning together with downstream-port charging behavior. Its integrated CDP and VBUS supply support reduce the number of separate functions required in compatible architectures, while the 14-pin VQFN package fits compact controller boards. The charging implementation must follow the device's application circuit and the applicable USB charging requirements. Confirm pin functions, VBUS limits, capacitor selection, and thermal performance before releasing a production design.

What is the Texas Instruments TUSB215RGYR?
The TUSB215RGYR is a USB 2.0 high-speed signal conditioner with DC boost, an integrated CDP, and VBUS supply support. It is designed to compensate for intersymbol-interference signal loss in a USB transmission channel and help systems pass USB electrical compliance tests. The device uses a 14-pin VQFN RGY package measuring 3.5 mm by 3.5 mm and operates from a 5 V supply. According to the Texas Instruments product documentation, it is intended for physical-layer signal conditioning rather than USB protocol processing.
What are the key specifications of TUSB215RGYR that engineers should know?
The key TUSB215RGYR specifications are USB 2.0 high-speed operation, a 5 V supply, DC boost, integrated CDP capability, VBUS supply support, and a 14-pin VQFN package. The package measures 3.5 mm by 3.5 mm, and the specified operating-temperature range is 0 °C to 70 °C. Texas Instruments also specifies a 90 Ω differential-impedance target across the complete USB high-speed signal path. These features make the device applicable to USB links whose physical signals are degraded by cable, connector, PCB, or interconnect loss.
Where can I download the TUSB215RGYR datasheet PDF?
Download the TUSB215RGYR datasheet from the official Texas Instruments product page at https://www.ti.com/lit/gpn/TUSB215. The manufacturer document should be used to confirm the complete pin descriptions, electrical characteristics, recommended application circuit, exposed-pad land pattern, and test conditions before layout release. The product is identified as a 14-pin RGY VQFN device with a 3.5 mm by 3.5 mm body, and its USB high-speed routing section specifies 90 Ω differential impedance for the entire signal path.
Where can I find the TUSB215RGYR pinout and VQFN footprint?
The TUSB215RGYR pinout and footprint information should be obtained from the manufacturer datasheet and the associated RGY land-pattern documentation. The device has 14 pins and an exposed pad in a 3.5 mm by 3.5 mm VQFN package. Use the pin-description table when assigning USB differential, supply, ground, configuration, and exposed-pad connections, and use the manufacturer land pattern for solder mask, paste, and thermal-pad construction. The exposed pad is part of the package design and should be tied according to the recommended schematic.
Does TUSB215RGYR compensate for USB channel signal loss?
Yes. The TUSB215RGYR is designed to compensate for intersymbol-interference signal loss within a USB transmission channel. This capability is most useful when connector launches, long traces, cable assemblies, or other interconnect structures attenuate and distort the USB high-speed differential signal. The conditioner is placed in the physical data path and improves signal shape before the receiver evaluates the waveform. Final effectiveness must be evaluated with eye measurements and applicable USB electrical compliance testing because installed-channel geometry strongly influences the result.
Does TUSB215RGYR support USB 2.0 high-speed signaling?
The TUSB215RGYR supports USB 2.0 high-speed signaling and is identified by Texas Instruments as a USB 2.0 high-speed signal conditioner. The device is not a general-purpose USB host controller and does not execute USB transactions; instead, it conditions the physical-layer differential signal. TI specifies 90 Ω differential impedance and general high-speed signal-routing practices for the complete path. The conditioner can therefore be considered for USB links that operate at high speed but show degradation across their combined PCB, connector, and cable channel.
What does DC boost do in the TUSB215RGYR?
DC boost in the TUSB215RGYR helps compensate for signal-amplitude loss along a degraded USB high-speed channel. Loss through long traces, connectors, and cables can reduce differential swing and alter the received waveform. By reshaping the signal in the data path, the device can improve the receiver's ability to distinguish the transmitted logic states. DC boost does not increase USB data rate and does not replace proper 90 Ω routing, matched differential pairs, or compliance testing. Its benefit depends on the actual insertion loss and channel characteristics of the installed design.
What is the operating temperature range of TUSB215RGYR?
The TUSB215RGYR is specified for an operating-temperature range of 0 °C to 70 °C. This range is the industrial-commercial temperature grade identified for the RGY package orderable and is appropriate for systems expected to operate within those limits. Designers requiring operation below 0 °C or above 70 °C should select a device with an explicitly broader temperature rating rather than extrapolating performance beyond the manufacturer specification. Ambient temperature, PCB copper area, and local heating should also be included in system-level thermal validation.
What USB layout requirements apply to TUSB215RGYR?
The TUSB215RGYR signal path should maintain 90 Ω differential impedance across the complete USB high-speed route, as stated in the Texas Instruments product documentation. Use tightly coupled differential traces, a continuous reference plane, controlled via transitions, and balanced length routing. Keep the conditioner positioned where the channel has accumulated meaningful loss, and avoid splitting the differential pair unnecessarily. Decoupling and configuration connections should follow the manufacturer application circuit, while the exposed thermal pad requires the prescribed land pattern and adequate ground-plane connection.
Is TUSB215RGYR suitable for USB hub and peripheral connections?
The TUSB215RGYR is suitable for USB 2.0 high-speed connections where the physical channel introduces sufficient loss to distort the differential waveform. Typical candidates include hub-to-peripheral links, host-to-device paths, docking systems, and cable assemblies with long interconnect sections. The integrated DC boost, CDP, and VBUS-supply features can simplify compatible designs, but the selected connector and charging architecture must be checked carefully. USB compliance depends on the complete system, so eye diagrams and electrical tests remain necessary after PCB integration.
TUSB215RGYR vs TUSB213RGYR - which is better for a USB high-speed link?
Choose the TUSB215RGYR when a design requires its integrated CDP, VBUS supply support, and DC boost functionality. The TUSB213RGYR is a closely related 14-pin VQFN USB high-speed signal-conditioner family member and is the more relevant comparison part for a footprint-focused redesign. The two devices must not be treated as automatically interchangeable: confirm every pin, exposed-pad connection, control input, and charging function against both manufacturer datasheets. The TUSB215 provides the broader integrated feature set, while the TUSB213 should be selected only when its defined functions satisfy the complete design.
When should I choose TUSB215RGYR over another USB signal conditioner?
Choose the TUSB215RGYR when the USB 2.0 high-speed channel requires active loss compensation together with integrated CDP and VBUS-supply functions in a 14-pin VQFN footprint. Its DC boost is useful for channels exhibiting reduced differential amplitude or edge degradation. Consider a simpler conditioner when the channel loss is mild, no charging function is needed, or fewer functions allow a lower-cost implementation. Validate the choice with channel-loss data, eye measurements, power analysis, and the manufacturer's application circuit rather than selecting the device from nominal USB data rate alone.
What can replace TUSB215RGYR in an existing design?
The closest documented same-brand replacement candidates are TUSB213RGYR, TUSB213IRGYT, and TUSB213QRGYTQ1, all associated with the 14-pin VQFN TUSB213 family. A replacement should be selected only after checking its complete pin map, exposed-pad connection, DC-boost behavior, charging functions, temperature grade, and USB compliance performance. The TUSB215 includes an integrated CDP and VBUS supply support, so a device that omits either function may require additional circuitry even when the package dimensions match. The manufacturer datasheets are the controlling documents for a board-level substitution.
Is TUSB215RGYR the same as TUSB213RGYR?
No. The TUSB215RGYR and TUSB213RGYR are related 14-pin VQFN USB high-speed signal conditioners, but they are not identical in their integrated feature sets. The TUSB215 is specifically identified with DC boost, an integrated CDP, and VBUS supply support. Because those capabilities can require different external connections and validation, treat them as different devices rather than a simple order-code substitution. A drop-in board change should proceed only after a pin-by-pin comparison confirms electrical compatibility and the required charging functions remain available.
What is the best Texas Instruments equivalent for TUSB215RGYR?
The best Texas Instruments alternatives identified for the TUSB215RGYR are TUSB213RGYR, TUSB213IRGYT, and TUSB213QRGYTQ1 because they are 14-pin VQFN signal-conditioner devices in the same TI family. Their practical suitability depends on whether the original design requires the TUSB215's DC boost, integrated CDP, and VBUS supply functions. Use the official TI datasheets to compare pin assignments, operating conditions, and application circuits. If those integrated functions are mandatory, retaining the TUSB215 is generally the lower-risk choice unless a redesign is planned.
Where can I buy TUSB215RGYR and what is its lead time?
Use the Request a Quote form on this page to request current TUSB215RGYR availability, lead time, and a quantity quotation. The component is identified as an active 14-pin VQFN Texas Instruments interface IC, but current inventory and lead time must be confirmed for the exact orderable MPN and requested quantity. Do not infer availability from general USB-interface inventory or use a family-level listing as confirmation. The RGY package includes an exposed pad, so quote requests should specify the intended reel or tray configuration and the production quantity.

داده‌های مرجع مهندسی برای TUSB215RGYR — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the TUSB215RGYR when the USB 2.0 high-speed path needs active channel compensation and the design can benefit from integrated CDP and VBUS supply support. Its 3.5 mm by 3.5 mm VQFN-14 package and 5 V operation suit compact host, hub, dock, cable, and peripheral designs. TUSB213RGYR is the practical same-family option when a redesign can omit the TUSB215's complete integrated charging feature set. TUSB213IRGYT offers another same-package family option for temperature-focused sourcing, while TUSB213QRGYTQ1 may suit automotive-oriented designs requiring that qualification route. In every case, review the pin map, DC-boost settings, exposed-pad connection, charging behavior, and operating-temperature requirements before approving a substitution.

مقایسه با جایگزین‌ها

پارامتر این محصول TUSB213RGYR TUSB213IRGYT TUSB213QRGYTQ1
Package VQFN-14 (RGY), 3.5 mm x 3.5 mm VQFN-14, 3.5 mm x 3.5 mm VQFN-14, 3.5 mm x 3.5 mm VQFN-14, 3.5 mm x 3.5 mm
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Primary Function USB 2.0 high-speed signal conditioner USB 2.0 high-speed signal conditioner USB 2.0 high-speed signal conditioner USB 2.0 high-speed signal conditioner
Integrated CDP Supported Not identified for the TUSB215 feature set Not identified for the TUSB215 feature set Not identified for the TUSB215 feature set
VBUS Supply Support Supported Not identified for the TUSB215 feature set Not identified for the TUSB215 feature set Not identified for the TUSB215 feature set
Channel Compensation Compensation for ISI signal loss USB high-speed signal conditioning USB high-speed signal conditioning USB high-speed signal conditioning

تفاوت‌های کلیدی

  • Integrated charging and VBUS features (در مقابلTUSB213RGYR)
  • Same 3.5 mm by 3.5 mm VQFN family footprint (در مقابلTUSB213IRGYT)
  • Automotive-oriented family alternative (در مقابلTUSB213QRGYTQ1)

یادداشت‌های طراحی

Treat the entire USB high-speed route as one controlled channel. Texas Instruments specifies 90 Ω differential impedance for the complete signal path, so use tightly coupled differential traces over a continuous reference plane, minimize layer transitions and stubs, and match the pair length. Place the TUSB215RGYR after the section where appreciable channel loss has accumulated. Verify eye height, differential swing, rise time, and overshoot on the assembled board because compliant component characteristics alone cannot guarantee system-level USB compliance.

Follow the manufacturer's RGY exposed-pad land pattern exactly, including paste geometry and solder-mask design. Provide a continuous ground connection beneath the thermal pad and adequate exposed copper for heat spreading without compromising the high-speed return path. Place input, output, and bypass capacitors close to their associated pins with very short ground returns. The package is only 3.5 mm by 3.5 mm, so small placement errors can add unwanted loop area and reduce the effectiveness of the DC boost and channel compensation.

Do not select TUSB215RGYR merely because another TUSB213-family device has the same VQFN-14 outline. The TUSB215 integrates a CDP and provides VBUS supply support in addition to DC boost, and removing either feature may require board changes. Before substituting an alternative, compare the complete pin-description table, exposed-pad connection, configuration pins, component values, and operating-temperature grade. Also confirm that the selected supplier is quoting the exact RGY orderable rather than a related package or temperature-grade variant.

Use the 5 V supply arrangement and capacitor values specified by the Texas Instruments application circuit. Keep the device's supply and ground connections short, and use a quiet return path to avoid injecting supply noise into the conditioned USB signal. Check the VBUS arrangement when the integrated CDP and VBUS supply functions are used, including source capability, discharge behavior, and protection requirements. The exact maximum currents, capacitor tolerances, and power limits must be confirmed from the manufacturer electrical-characteristics table before production release.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The device is intended to help pass USB 2.0 electrical compliance tests, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified.

تاریخ تأیید داده‌ها: 2026-11-10 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

TUSB215RGYR datasheet TUSB215RGYR pinout TUSB215RGYR datasheet pdf TUSB215RGYR equivalent TUSB215RGYR replacement TUSB215RGYR price TUSB215RGYR stock Texas Instruments TUSB215RGYR TUSB215 VQFN-14 pinout TUSB215 USB high-speed signal conditioner TUSB215RGYR vs TUSB213RGYR TUSB215RGYR application circuit TUSB215RGYR 90 ohm layout TUSB215RGYR VQFN footprint

قطعات و اصطلاحات مرتبط

Texas Instruments TUSB215RGYR TUSB215 TUSB213RGYR TUSB213IRGYT TUSB213QRGYTQ1 USB 2.0 high-speed signal conditioner USB interface IC signal-processing interface physical-layer signal conditioning DC boost integrated CDP Charging Downstream Port VBUS supply intersymbol interference ISI differential signal 90 ohm differential impedance USB electrical compliance VQFN-14 RGY package 3.5 mm by 3.5 mm VQFN exposed pad surface-mount package
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ