Nuvoton Technology Corporation

W78E051C40FL - 8-Bit 40MHz 8051 MCU | Nuvoton

MPN: W78E051C40FL ✓ فعال
5V Vdss 44-BQFP Package 40MHz Speed 4KB (4K x 8) Memory
حداقل سفارش: 1 |

W78E051C40FL نمای کلی

The Nuvoton Technology Corporation W78E051C40FL is an 8-bit 8051-compatible microcontroller with 4KB (4K x 8) of program memory, 128 bytes of RAM, 36 I/O pins, a 40MHz maximum operating frequency, and a 44-BQFP package. The device is identified as a 5V part in product listings and is positioned for embedded-control designs requiring a moderate number of external I/O and a compact, pin-compatible package.

An 8-bit microcontroller is a semiconductor that executes firmware from nonvolatile program memory and controls embedded-system inputs and outputs. The W78E051C40FL belongs to the 8051-compatible microcontroller hierarchy: MCU, embedded processor, 8-bit processor, and semiconductor. Its 36 available I/O pins allow the device to interface with sensors, indicators, switches, relays, communication devices, and other peripheral circuits without requiring a high-pin-count package.

The principal confirmed specifications are 4KB of flash program memory, 128 bytes of RAM, 36 I/O lines, a maximum clock speed of 40MHz, and a 44-BQFP package. These characteristics make the device suitable for compact control systems in which the application firmware can fit within the available 4KB program-memory area and temporary working variables can remain within the 128-byte RAM space. The 5V operating designation also places it in the conventional voltage range for many legacy-compatible embedded designs.

The W78E051C40FL uses the established 8-bit 8051 programming model rather than a 32-bit or high-performance application-processor architecture. This architecture is appropriate for supervisory logic, digital control, panel interfaces, and embedded products where deterministic control and broad peripheral integration matter more than large code storage or high-bandwidth computation. Firmware organization must account for the limited 4KB program area and 128-byte RAM allocation.

Typical use cases include industrial control panels, building-control modules, appliance controllers, power-supply supervisory circuits, instrumentation interfaces, and small automation products. In each case, the 36 I/O pins can distribute control and monitoring functions, while the 40MHz clock provides execution headroom for interrupt handling, state-machine logic, and communication routines. Peripheral capabilities, interrupt vectors, timers, and communication functions should be confirmed against the manufacturer datasheet before a design is released.

PCB implementation should preserve the 44-BQFP footprint and route each signal according to the manufacturer pin-description table. Stable decoupling close to the supply pins, a deliberate ground-plane strategy, and unobstructed programming or test access are essential. Because the public product information does not expose a complete verified pin list, designers should use the official datasheet for pin assignment, oscillator configuration, reset requirements, and programming guidance rather than inferring connections from the package drawing.

This product page combines the confirmed memory, I/O, speed, voltage, and package characteristics with sourcing guidance, engineering notes, application analysis, and a transparent comparison framework. It also distinguishes confirmed device attributes from parameters that require confirmation from the manufacturer datasheet, helping engineers shorten component-selection and hardware-review cycles without obscuring design-critical uncertainty.

جایگزین‌های drop-in برای W78E051C40FL — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

هیچ جایگزین مستقیمی برای این محصول موجود نیست.

درخواست جایگزین

W78E051C40FL حداکثر مقادیر مجاز و مشخصات الکتریکی

Microcontroller Type 8-bit 8051-compatible microcontroller
Program Memory Size 4KB (4K x 8)
Program Memory Type Flash
RAM Size 128 x 8 bits (128 bytes)
Number of I/O Pins 36 pins
Maximum CPU Frequency 40MHz
Operating Voltage 5V
بسته‌بندی 44-BQFP
Architecture 8051, 8-bit
عرض گذرگاه داده 8 bits
Program Memory Organization 4K x 8
RAM Organization 128 x 8
نوع نصب Surface mount

راهنمای پیکربندی پین W78E051C40FL 44-bqfp

پیکربندی پین برای W78E051C40FL (پکیج 44-bqfp). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 44-bqfp برای W78E051C40FL

داده پین‌آوت تفصیلی موجود نیست برای W78E051C40FL.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

W78E051C40FL مناسب است برای 6 کاربردs: Industrial Control Panel, Appliance Control Module, Building Automation Controller, Power-Supply Supervisory Circuit, Instrumentation and Data-Acquisition Front End, Small Automation Controller.

🏭

Industrial Control Panel

The W78E051C40FL fits compact industrial control-panel logic because it combines 36 I/O pins with an 8-bit 8051-compatible architecture and a 40MHz maximum CPU frequency. The I/O budget can accommodate push-button inputs, status indicators, relay-control lines, and supervisory signals without requiring a large connector-heavy package. Its 4KB flash and 128-byte RAM make it most appropriate for compact state-machine logic rather than feature-rich human-interface firmware. Firmware should keep buffers and call depth tightly bounded, while the design must verify the complete pin assignment, operating-temperature range, and electrical limits from the manufacturer documentation before production release.

🔧

Appliance Control Module

In an appliance controller, the W78E051C40FL can execute a deterministic control sequence using its 40MHz maximum clock and 36 I/O pins for user controls, sensors, display segments, and actuator requests. The 5V operating designation fits many conventional appliance signal levels, but each connected interface still requires electrical verification. Limited memory means the application should use compact state representations, event-driven control, and nonvolatile configuration strategies. The device is particularly suitable for secondary supervisory or accessory-control functions when a higher-end processor would add unnecessary cost and software complexity.

🧩

Building Automation Controller

The W78E051C40FL can serve as a small building-automation controller for distributed lighting, access, HVAC, or environmental-monitoring nodes. Its 36 available I/O pins support digital sensors and discrete actuators, while the 40MHz 8-bit core can coordinate timers and sequential logic. The 4KB program-memory limit favors compact protocol handling and event-driven firmware rather than large local data logging. For connected equipment, developers should add suitable isolation, surge protection, and communication circuitry outside the MCU and should confirm operating-temperature and interface requirements from the manufacturer documentation.

⚡

Power-Supply Supervisory Circuit

The W78E051C40FL is appropriate for power-supply supervision when the design needs coordinated enable sequencing, fault flags, discrete monitoring inputs, and a compact controller rather than a high-performance processor. Its 36 I/O pins can connect to voltage-status signals and protection-state indicators, and the 40MHz clock provides sufficient timing margin for fast supervisory loops. The 128-byte RAM limits buffering, so control variables should be selected carefully. The controller must remain isolated from high-energy switching paths and should use appropriately rated external sensing and protection components.

📺

Instrumentation and Data-Acquisition Front End

The W78E051C40FL can manage low-channel-count instrumentation front ends where sensors, threshold comparators, switches, and status indicators require coordinated digital control. The 36 I/O pins and 40MHz maximum frequency support responsive sampling sequences and interrupt-driven input handling, while the 4KB flash capacity suits compact calibration and state-management routines. It is less suitable when local waveform storage or large protocol buffers are required because RAM is limited to 128 bytes. Signal conditioning, analog isolation, and precision conversion should be implemented with dedicated external components.

⚙️

Small Automation Controller

The W78E051C40FL works as a compact automation controller for equipment with a moderate number of digital inputs and outputs, such as stepper-control interlocks, mode selectors, and status lamps. Its 8051-compatible 8-bit architecture is straightforward for deterministic sequencing, and the 40MHz clock leaves headroom for timer-based tasks. The 4KB flash limit and 128-byte RAM encourage concise firmware with minimal buffering. A production design should validate startup behavior, reset configuration, peripheral availability, and all package connections against the manufacturer datasheet before releasing the PCB for assembly.

What are the key specifications of W78E051C40FL that engineers should know?
The W78E051C40FL is an 8-bit, 40MHz 8051-compatible microcontroller with 4KB of flash memory, 128 bytes of RAM, 36 I/O pins, and a 44-BQFP package. The product listing also identifies it as a 5V device. These figures define its position as a compact embedded-control MCU rather than a high-memory application processor. According to the W78E051C40FL specification listing on DigChip, the memory organization is 4K x 8, while RAM is organized as 128 x 8.
What is the program memory size of W78E051C40FL?
The W78E051C40FL provides 4KB of flash program memory, organized as 4K x 8. According to the DigChip W78E051C40FL specification page, this capacity supports the device designation as an 8-bit microcontroller. Firmware selection should account for this limit by checking code size, interrupt routines, constants, and initialization tables before committing to the MCU in a new design.
How much RAM does W78E051C40FL have?
The W78E051C40FL has 128 bytes of RAM, expressed as 128 x 8 bits in the product specifications. This is a modest working-memory allocation compared with larger 8-bit MCUs. The W78E051C40FL datasheet listing confirms the value, so applications should minimize call depth, buffer use, and concurrent state to avoid exhausting the 128-byte RAM area.
What is the maximum operating frequency of W78E051C40FL?
The W78E051C40FL operates at a maximum CPU frequency of 40MHz. This frequency is stated on the DigChip specification page for the device. A 40MHz clock provides useful execution margin for interrupt-driven control, timers, state machines, and lightweight serial routines, although actual application throughput depends on the firmware, peripheral configuration, and clock arrangement specified in the manufacturer datasheet.
How many I/O pins are available on W78E051C40FL?
The W78E051C40FL has 36 I/O pins. That count makes the device suitable for embedded controllers that must connect multiple discrete inputs and outputs while retaining a relatively compact 44-BQFP package. The I/O count does not imply that every numbered package terminal is a general-purpose GPIO; consult the manufacturer pin-description table for alternate functions, power terminals, clock pins, reset, and programming signals.
What package does W78E051C40FL use?
The W78E051C40FL is packaged in a 44-BQFP configuration. Product records identify the case as 44-BQFP, and the same listing describes it as a 44-pin device. The package supports a moderate pin count compared with large leaded packages, but each footprint and exposed-pad requirement should be checked against the official mechanical drawing before the component is placed on a PCB.
Where can I download the W78E051C40FL datasheet PDF?
The W78E051C40FL datasheet PDF can be accessed through the Winbond document page on AllDataSheet, while the Octopart datasheet entry provides an additional manufacturer-document gateway. The AllDataSheet URL identifies the device as an 8-bit W78-series microcontroller with 4KB of flash, 36 I/O pins, a 40MHz rating, and a 44-pin package. Use the manufacturer document itself as the controlling reference for pinout and electrical limits.
Where can I find the W78E051C40FL pinout?
The W78E051C40FL pinout is found in the manufacturer pin-description table included with the device documentation. The Octopart datasheet entry and the AllDataSheet document page lead to the relevant datasheet material. Because the package includes power, clock, programming, and alternate-function assignments, do not assign signals solely from a generic 44-pin footprint; verify every net against the official pin table.
What can replace W78E051C40FL?
A true replacement for the W78E051C40FL must use the same 44-BQFP land pattern, preserve pin-to-pin signal assignments, and maintain compatible 5V operation, 4KB program memory, 128-byte RAM, 36 I/O pins, and 40MHz timing expectations. The cross-reference search did not identify a verified pin-compatible candidate. Treat an 8051-family part with different memory, package, pinout, or peripheral assignments as a redesign candidate rather than a drop-in replacement.
Is W78E051C40FL the same as W78E051C40RL?
The W78E051C40FL and W78E051C40RL are not established as pin-to-pin equivalents because their package suffixes identify different physical package options. The W78E051C40FL is listed specifically in 44-BQFP, while the RL suffix denotes a different package configuration in this product family. Confirm the complete ordering code and mechanical drawing before considering any alternative; only a verified same-footprint match qualifies as a drop-in replacement.
Is W78E051C40FL suitable for an industrial control panel?
The W78E051C40FL is suitable for many industrial control-panel functions when its 36 I/O pins, 5V operating designation, and 8051-compatible processing capability match the system requirements. The device can support switch inputs, indicator outputs, interlocks, and supervisory logic. Before design approval, confirm operating-temperature limits, electrical characteristics, timer resources, communication interfaces, and isolation requirements in the manufacturer datasheet.
W78E051C40FL vs W78E051C40FL? Which is better for a new 5V control design?
For a new 5V embedded-control design, the W78E051C40FL is the defined ordering option when a 44-BQFP package with 4KB of flash, 128 bytes of RAM, 36 I/O pins, and a 40MHz maximum frequency is required. A meaningful comparison should use a separately verified alternative rather than the identical part number. Verify peripheral mix, memory, timing, and pin compatibility before changing the MCU selection.
When should I choose W78E051C40FL over another 8051 microcontroller?
Choose the W78E051C40FL when a new design specifically targets its 44-BQFP footprint, 36 I/O pins, 4KB flash limit, 128-byte RAM budget, and 40MHz maximum clock. It is less attractive when firmware exceeds 4KB, working memory must exceed 128 bytes, or the selected board requires different package pins. The conservative approach is to lock the MCU only after checking memory sizing and the complete peripheral assignment.
Where to buy W78E051C40FL online?
Use the Request a Quote form on this page to request W78E051C40FL availability, quotation, and order handling. The form is the appropriate channel for current sourcing because component inventory and commercial terms can change quickly. Before submitting the request, include the exact MPN, required package, target quantity, and any date-code or traceability requirements needed by the production process.
What is the price of W78E051C40FL?
The current W78E051C40FL quotation is established through the Request a Quote form on this page. The form allows the exact MPN and required quantity to be reviewed for current commercial terms without embedding a potentially stale price in technical content. For production planning, state expected annual usage, package preference, and forecast horizon so the sourcing response reflects the actual demand profile.
What is the lead time for W78E051C40FL and is it in stock?
Current stock status and lead time for the W78E051C40FL should be confirmed through the Request a Quote form on this page. The form is designed to return an availability and lead-time response for the exact ordering code. Include your required quantity and production schedule because neither inventory position nor delivery timing should be inferred from generic distributor listings or from the existence of a datasheet page.

داده‌های مرجع مهندسی برای W78E051C40FL — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the W78E051C40FL for a compact 8051-based control design that requires a 44-BQFP footprint, 36 I/O pins, a 40MHz maximum clock, and operation from a 5V-class supply. Its 4KB of flash and 128 bytes of RAM are suitable for concise supervisory logic, digital I/O control, timers, and deterministic state machines. They may be restrictive for protocol-heavy firmware, local data buffering, graphical interfaces, or applications requiring extensive library code. No pin-compatible replacement has been verified, so changing manufacturers should be treated as a redesign unless a candidate is documented with the same package, pinout, memory, voltage, timing, and peripheral requirements. Before final selection, confirm operating-temperature limits, reset and oscillator behavior, peripheral availability, programming method, and electrical characteristics in the manufacturer datasheet.

مقایسه با جایگزین‌ها

پارامتر این محصول
Brand Nuvoton Technology Corporation
Package 44-BQFP
CPU Architecture 8-bit 8051
Maximum CPU Frequency 40MHz
Program Memory 4KB (4K x 8) flash
RAM 128 bytes (128 x 8)
Number of I/O Pins 36
Operating Voltage 5V

یادداشت‌های طراحی

Design the board around the exact 44-BQFP footprint and verify it against the current manufacturer mechanical drawing before releasing copper artwork. Keep power-distribution and ground-plane geometry consistent with the recommended layout, provide local supply bypassing at the device, and route exposed programming, clock, reset, and debug functions so they remain accessible during board test. Do not infer signal assignments from the package dimensions because alternate-function pins can constrain otherwise straightforward connections.

Plan the 5V supply path around both average load and transient demand. Place the required bypass capacitors close to the device power terminals, maintain a low-impedance ground return, and confirm the final capacitor values, voltage rating, and ESR requirements from the manufacturer datasheet. Account for voltage tolerance, startup current, and any regulator headroom rather than treating the nominal 5V description as sufficient for every operating condition.

The 4KB flash and 128-byte RAM are the most important firmware constraints. Include compiler-generated library code, interrupt handlers, stack usage, buffers, and constants when estimating memory demand. Avoid deep recursive calls and multi-buffer protocol processing, and test the fully linked image under worst-case interrupt nesting. A peripheral feature that sounds suitable on paper may be impractical if its working state cannot fit within the 128-byte RAM allocation.

Separate sensitive measurement or communication paths from relay drivers, clock edges, and switching-power nodes. Use the shortest practical routing for high-speed or timing-sensitive signals, provide a continuous ground reference, and keep unused inputs in a defined state when the manufacturer guidance permits. If the 40MHz system clock drives external signals, calculate trace and load effects rather than assuming logic-level timing remains ideal at every package terminal.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The manufacturer documents are the controlling source for environmental and material-compliance declarations. No RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified in the product records used for this page.

تاریخ تأیید داده‌ها: 2026-11-11 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

W78E051C40FL datasheet W78E051C40FL specifications W78E051C40FL pinout W78E051C40FL datasheet pdf W78E051C40FL equivalent W78E051C40FL replacement W78E051C40FL cross reference W78E051C40FL footprint W78E051C40FL price W78E051C40FL stock Nuvoton W78E051C40FL W78E051C40FL 44 BQFP W78E051C40FL 40MHz W78E051C40FL application circuit

قطعات و اصطلاحات مرتبط

Nuvoton Technology Corporation W78E051C40FL W78E051 series 8051-compatible microcontroller 8-bit microcontroller MCU embedded processor semiconductor program memory flash memory RAM I/O ports CPU frequency 44-BQFP quad flat package surface mount industrial control building automation appliance control power-supply supervision instrumentation small automation controller 5V operation 8051 architecture
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ