W78E051C40FL - 8-Bit 40MHz 8051 MCU | Nuvoton
부품 번호: W78E051C40FL ✓ 활성W78E051C40FL 개요
An 8-bit microcontroller is a semiconductor that executes firmware from nonvolatile program memory and controls embedded-system inputs and outputs. The W78E051C40FL belongs to the 8051-compatible microcontroller hierarchy: MCU, embedded processor, 8-bit processor, and semiconductor. Its 36 available I/O pins allow the device to interface with sensors, indicators, switches, relays, communication devices, and other peripheral circuits without requiring a high-pin-count package.
The principal confirmed specifications are 4KB of flash program memory, 128 bytes of RAM, 36 I/O lines, a maximum clock speed of 40MHz, and a 44-BQFP package. These characteristics make the device suitable for compact control systems in which the application firmware can fit within the available 4KB program-memory area and temporary working variables can remain within the 128-byte RAM space. The 5V operating designation also places it in the conventional voltage range for many legacy-compatible embedded designs.
The W78E051C40FL uses the established 8-bit 8051 programming model rather than a 32-bit or high-performance application-processor architecture. This architecture is appropriate for supervisory logic, digital control, panel interfaces, and embedded products where deterministic control and broad peripheral integration matter more than large code storage or high-bandwidth computation. Firmware organization must account for the limited 4KB program area and 128-byte RAM allocation.
Typical use cases include industrial control panels, building-control modules, appliance controllers, power-supply supervisory circuits, instrumentation interfaces, and small automation products. In each case, the 36 I/O pins can distribute control and monitoring functions, while the 40MHz clock provides execution headroom for interrupt handling, state-machine logic, and communication routines. Peripheral capabilities, interrupt vectors, timers, and communication functions should be confirmed against the manufacturer datasheet before a design is released.
PCB implementation should preserve the 44-BQFP footprint and route each signal according to the manufacturer pin-description table. Stable decoupling close to the supply pins, a deliberate ground-plane strategy, and unobstructed programming or test access are essential. Because the public product information does not expose a complete verified pin list, designers should use the official datasheet for pin assignment, oscillator configuration, reset requirements, and programming guidance rather than inferring connections from the package drawing.
This product page combines the confirmed memory, I/O, speed, voltage, and package characteristics with sourcing guidance, engineering notes, application analysis, and a transparent comparison framework. It also distinguishes confirmed device attributes from parameters that require confirmation from the manufacturer datasheet, helping engineers shorten component-selection and hardware-review cycles without obscuring design-critical uncertainty.
드롭인 대체품: W78E051C40FL — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청W78E051C40FL 최대 정격 & 전기적 특성
| Microcontroller Type | 8-bit 8051-compatible microcontroller |
| Program Memory Size | 4KB (4K x 8) |
| Program Memory Type | Flash |
| RAM Size | 128 x 8 bits (128 bytes) |
| Number of I/O Pins | 36 pins |
| Maximum CPU Frequency | 40MHz |
| Operating Voltage | 5V |
| 패키지 | 44-BQFP |
| Architecture | 8051, 8-bit |
| 데이터 버스 폭 | 8 bits |
| Program Memory Organization | 4K x 8 |
| RAM Organization | 128 x 8 |
| 실장 유형 | Surface mount |
W78E051C40FL 44-bqfp 핀 구성 가이드
W78E051C40FL(44-bqfp 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: W78E051C40FL.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
W78E051C40FL 적합 용도: 6 애플리케이션s: Industrial Control Panel, Appliance Control Module, Building Automation Controller, Power-Supply Supervisory Circuit, Instrumentation and Data-Acquisition Front End, Small Automation Controller.
Industrial Control Panel
The W78E051C40FL fits compact industrial control-panel logic because it combines 36 I/O pins with an 8-bit 8051-compatible architecture and a 40MHz maximum CPU frequency. The I/O budget can accommodate push-button inputs, status indicators, relay-control lines, and supervisory signals without requiring a large connector-heavy package. Its 4KB flash and 128-byte RAM make it most appropriate for compact state-machine logic rather than feature-rich human-interface firmware. Firmware should keep buffers and call depth tightly bounded, while the design must verify the complete pin assignment, operating-temperature range, and electrical limits from the manufacturer documentation before production release.
Appliance Control Module
In an appliance controller, the W78E051C40FL can execute a deterministic control sequence using its 40MHz maximum clock and 36 I/O pins for user controls, sensors, display segments, and actuator requests. The 5V operating designation fits many conventional appliance signal levels, but each connected interface still requires electrical verification. Limited memory means the application should use compact state representations, event-driven control, and nonvolatile configuration strategies. The device is particularly suitable for secondary supervisory or accessory-control functions when a higher-end processor would add unnecessary cost and software complexity.
Building Automation Controller
The W78E051C40FL can serve as a small building-automation controller for distributed lighting, access, HVAC, or environmental-monitoring nodes. Its 36 available I/O pins support digital sensors and discrete actuators, while the 40MHz 8-bit core can coordinate timers and sequential logic. The 4KB program-memory limit favors compact protocol handling and event-driven firmware rather than large local data logging. For connected equipment, developers should add suitable isolation, surge protection, and communication circuitry outside the MCU and should confirm operating-temperature and interface requirements from the manufacturer documentation.
Power-Supply Supervisory Circuit
The W78E051C40FL is appropriate for power-supply supervision when the design needs coordinated enable sequencing, fault flags, discrete monitoring inputs, and a compact controller rather than a high-performance processor. Its 36 I/O pins can connect to voltage-status signals and protection-state indicators, and the 40MHz clock provides sufficient timing margin for fast supervisory loops. The 128-byte RAM limits buffering, so control variables should be selected carefully. The controller must remain isolated from high-energy switching paths and should use appropriately rated external sensing and protection components.
Instrumentation and Data-Acquisition Front End
The W78E051C40FL can manage low-channel-count instrumentation front ends where sensors, threshold comparators, switches, and status indicators require coordinated digital control. The 36 I/O pins and 40MHz maximum frequency support responsive sampling sequences and interrupt-driven input handling, while the 4KB flash capacity suits compact calibration and state-management routines. It is less suitable when local waveform storage or large protocol buffers are required because RAM is limited to 128 bytes. Signal conditioning, analog isolation, and precision conversion should be implemented with dedicated external components.
Small Automation Controller
The W78E051C40FL works as a compact automation controller for equipment with a moderate number of digital inputs and outputs, such as stepper-control interlocks, mode selectors, and status lamps. Its 8051-compatible 8-bit architecture is straightforward for deterministic sequencing, and the 40MHz clock leaves headroom for timer-based tasks. The 4KB flash limit and 128-byte RAM encourage concise firmware with minimal buffering. A production design should validate startup behavior, reset configuration, peripheral availability, and all package connections against the manufacturer datasheet before releasing the PCB for assembly.
엔지니어링 참조 데이터: W78E051C40FL — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Brand | Nuvoton Technology Corporation |
| Package | 44-BQFP |
| CPU Architecture | 8-bit 8051 |
| Maximum CPU Frequency | 40MHz |
| Program Memory | 4KB (4K x 8) flash |
| RAM | 128 bytes (128 x 8) |
| Number of I/O Pins | 36 |
| Operating Voltage | 5V |
설계 노트
Design the board around the exact 44-BQFP footprint and verify it against the current manufacturer mechanical drawing before releasing copper artwork. Keep power-distribution and ground-plane geometry consistent with the recommended layout, provide local supply bypassing at the device, and route exposed programming, clock, reset, and debug functions so they remain accessible during board test. Do not infer signal assignments from the package dimensions because alternate-function pins can constrain otherwise straightforward connections.
Plan the 5V supply path around both average load and transient demand. Place the required bypass capacitors close to the device power terminals, maintain a low-impedance ground return, and confirm the final capacitor values, voltage rating, and ESR requirements from the manufacturer datasheet. Account for voltage tolerance, startup current, and any regulator headroom rather than treating the nominal 5V description as sufficient for every operating condition.
The 4KB flash and 128-byte RAM are the most important firmware constraints. Include compiler-generated library code, interrupt handlers, stack usage, buffers, and constants when estimating memory demand. Avoid deep recursive calls and multi-buffer protocol processing, and test the fully linked image under worst-case interrupt nesting. A peripheral feature that sounds suitable on paper may be impractical if its working state cannot fit within the 128-byte RAM allocation.
Separate sensitive measurement or communication paths from relay drivers, clock edges, and switching-power nodes. Use the shortest practical routing for high-speed or timing-sensitive signals, provide a continuous ground reference, and keep unused inputs in a defined state when the manufacturer guidance permits. If the 40MHz system clock drives external signals, calculate trace and load effects rather than assuming logic-level timing remains ideal at every package terminal.
규정 준수 정보
The manufacturer documents are the controlling source for environmental and material-compliance declarations. No RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified in the product records used for this page.