WM8259SCDS/RV - 16-Bit 3 MSPS CIS/CCD AFE | Cirrus Logic
MPN: WM8259SCDS/RV ✓ فعالWM8259SCDS/RV نمای کلی
An analog front end, or AFE, is an integrated signal-processing block placed between an image sensor and the system digital electronics. In the broader hierarchy, an AFE is an integrated circuit, an interface device, and part of the image-signal-processing chain. The WM8259SCDS/RV combines analog input conditioning with a 16-bit SAR-type conversion function and a digital output interface, reducing the number of separate components required in scanner, camera, and optical measurement equipment.
The key features of this device include one analog channel, 16-bit resolution, 3 MSPS operation, a 4-bit-wide output, and 132 mW operation. The wide output is intended to carry the converted digital result efficiently to downstream circuitry. Its single-channel architecture makes it appropriate for systems where one sensor output is processed at a time, while the 3 MSPS rate supports imaging workflows requiring faster sequential sampling than low-speed general-purpose signal converters.
The WM8259SCDS/RV is identified as a CMOS image sensor and charge-coupled device AFE. Its architecture is therefore centered on receiving sensor-generated analog information, applying the required gain and signal conditioning, and converting that information into a digital representation. The 16-bit word length provides substantially more numerical resolution than an 8-bit or 12-bit interface, which can be useful when preserving low-level image detail or reducing quantization error in downstream processing.
Typical applications include document scanners, imaging modules, machine-vision systems, barcode and inspection equipment, and other CIS or CCD signal-chain designs. In these systems, the device can be positioned after the image sensor and before the image processor, allowing the sensor output to be conditioned and digitized before digital processing begins. The 3 MSPS operating rate supports practical throughput for line-scan and area-scan imaging workflows.
PCB implementation should follow the manufacturer datasheet pin description and recommended application circuit. Pay particular attention to analog input routing, decoupling, clocking, and the digital output interface. Because the device combines analog and digital functions, keeping sensitive sensor and reference paths away from high-current switching nodes reduces the risk of coupling unwanted noise into the image signal.
This product page combines the WM8259SCDS/RV device description, package information, technical identification, sourcing details, and practical interface guidance. It is intended to help engineers evaluate whether the Cirrus Logic AFE matches their CIS or CCD signal-chain requirements before moving into detailed circuit design.
جایگزینهای drop-in برای WM8259SCDS/RV — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای WM8259SCDS/RV (همان فرمفاکتور و فوتپرینت) — متفاوت در Package.
WM8259SCDS/V
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←WM8259SCDS/RV حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | Single-channel analog front end (AFE) |
| Manufacturer | Cirrus Logic |
| Analog Channels | 1 channel |
| ADC Resolution | 16 bit |
| Conversion Rate | 3 MSPS |
| Power Consumption | 132 mW |
| Sensor Interface | CIS and CCD |
| Output Width | 4 bit |
| ولتاژ تغذیه | 3.3 V |
| بستهبندی | 20-SSOP |
| نوع نصب | Surface mount |
| Packing Suffix | RV |
| Output Interface | 4-bit-wide digital output |
راهنمای پیکربندی پین WM8259SCDS/RV 20-ssop
پیکربندی پین برای WM8259SCDS/RV (پکیج 20-ssop). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای WM8259SCDS/RV.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
WM8259SCDS/RV مناسب است برای 6 کاربردs: Document Scanner Imaging, Machine Vision Inspection, CMOS Image Sensor Interface, Barcode and Print Inspection, Optical Measurement Equipment, Security Camera Imaging.
Document Scanner Imaging
The WM8259SCDS/RV fits document-scanner signal chains that receive analog output from a CCD or CIS sensor. Its single-channel architecture processes one sensor signal path, while the 16-bit conversion resolution preserves fine grayscale information before image processing. The 3 MSPS operating rate supports sequential line scanning at practical image-transfer rates. It also helps simplify the analog section by combining sensor-side conditioning and conversion in one 20-SSOP device. Designers should preserve clean sensor routing, provide the specified bypassing, and follow the manufacturer timing and level requirements. The result is a compact front end suitable for office scanners and document-capture products where image fidelity and repeatable data transfer matter more than a multi-channel sensor interface.
پیشنهادی
Machine Vision Inspection
The WM8259SCDS/RV is suitable for machine-vision inspection equipment where a CCD output must be conditioned and digitized before feature analysis. The 16-bit resolution preserves low-contrast intensity differences that may be important when detecting edges, scratches, alignment marks, or dimensional anomalies. A 3 MSPS conversion rate provides the throughput needed to examine successive sensor regions without moving all conversion into a slower external ADC. The single-channel AFE is most natural for a one-sensor inspection head, while the 20-SSOP package supports surface-mounted production assembly. Designers should account for sensor timing, analog input conditioning, digital output routing, and layout separation between sensitive image signals and unrelated switching circuitry when establishing measurement accuracy.
پیشنهادی
CMOS Image Sensor Interface
The WM8259SCDS/RV can serve as the analog front end for a CMOS image sensor output in compact imaging equipment. Its single-channel format matches a sensor architecture that presents one analog signal channel, and the integrated AFE role helps reduce the number of discrete amplification and conversion stages between the sensor and digital logic. The 16-bit conversion resolution supports detailed image capture, while the 3 MSPS rate allows sequential frames or rows to be digitized efficiently. Board layout is especially important because the sensor output may contain a small useful signal and any coupled noise can become part of the image record. Short analog traces, stable references, effective bypassing, and careful clock routing should follow the manufacturer application circuit to preserve signal quality.
پیشنهادی
Barcode and Print Inspection
The WM8259SCDS/RV is applicable to barcode readers and print-inspection systems that convert reflected-light sensor outputs into digital data. The 16-bit AFE resolution can retain tonal transitions and subtle print differences, while the 3 MSPS rate supports the rapid sequential sampling expected in automated production lines. A single sensor channel keeps the architecture economical for a focused scan line. The device fits between the optical sensor and the controller that performs decoding or defect analysis. Signal-integrity planning should keep the sensor return path compact and isolate it from motor, relay, and switching-regulator currents. The manufacturer’s recommended input network, clock arrangement, and output interface timing should be reproduced closely to prevent scan jitter or intermittent loss of narrow barcode features.
پیشنهادی
Optical Measurement Equipment
The WM8259SCDS/RV can be used in optical measurement instruments that convert low-level, continuously varying sensor signals into digital values for analysis. Its 16-bit resolution supports fine measurement granularity, and the 3 MSPS rate is suitable for rapid acquisition of successive readings. The single-channel format works well with a linear photodiode or line sensor where one analog output is sampled repeatedly. Because measurement accuracy can be affected by offset, noise, and clock coupling, the analog input and reference paths require careful layout and the output interface requires deterministic timing. Designers should verify the required sensor-output range and acquisition-control sequence against the datasheet. The 20-SSOP package also makes the AFE practical for compact instrumentation without relying on a large multi-channel converter.
پیشنهادی
Security Camera Imaging
The WM8259SCDS/RV can support compact image-acquisition stages in surveillance and security-camera designs built around CCD or CIS sensors. Its 16-bit conversion resolution preserves image detail and low-level scene information, while the 3 MSPS rate provides a practical sequential sampling capability. The single-channel AFE is most appropriate when the imaging module exposes one analog sensor output and the camera pipeline performs subsequent digital processing. In an enclosure containing switching regulators or motor-related loads, analog and digital partitioning becomes essential to avoid coupling periodic noise into the image. Use a quiet supply arrangement, maintain short sensor traces, and follow the specified clock and output timing. The device’s integrated AFE role can reduce external conditioning complexity while preserving a clear path from sensor output to digital image data.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای WM8259SCDS/RV — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | WM8259SCDS/V |
|---|---|---|
| Package | 20-SSOP | 20-SSOP |
| Brand | Cirrus Logic | Cirrus Logic |
| Product Type | Single-channel CIS/CCD AFE | Single-channel CIS/CCD AFE |
| ADC Resolution | 16 bit | 16 bit |
| Conversion Rate | 3 MSPS | 3 MSPS |
| Supply Voltage | 3.3 V | 3.3 V |
| Power Consumption | 132 mW | 132 mW |
| Output Width | 4 bit | 4 bit |
| Sensor Compatibility | CIS and CCD | CIS and CCD |
| Analog Channels | 1 channel | 1 channel |
تفاوتهای کلیدی
- Single-chip 16-bit imaging conversion (در مقابلWM8259SCDS/V)
- Direct same-package replacement path (در مقابلWM8259SCDS/V)
- Purpose-built CIS/CCD signal conditioning (در مقابلGeneric 20-SSOP AFE)
یادداشتهای طراحی
Keep the WM8259SCDS/RV sensor input path short and place the manufacturer-specified input-network components close to the relevant pins. Route clock and digital output signals away from the analog input and reference nodes. Because this AFE converts small CCD or CIS signals, even modest coupling from clocks, regulators, or fast digital edges can appear as image noise or timing-dependent artifacts.
Design the 3.3 V supply with the bypass network shown in the manufacturer application circuit and provide adequate settling time before sampling begins. The device is listed at 132 mW, but total system heat depends on conversion activity, adjacent circuitry, and supply efficiency. Confirm startup and shutdown sequencing so the sensor and AFE do not exchange invalid signals during rail transitions.
Use the datasheet timing diagram to define clock edges, conversion latency, and the interval in which the 4-bit-wide output is valid. Account for the receiving logic’s setup and hold requirements, and avoid loading output traces with unnecessary capacitance. Consistent clock generation and controlled output sampling are especially important when the source signal contains narrow lines or low-contrast features.
Do not assume that a generic 20-SSOP AFE can replace the WM8259SCDS/RV merely because the packages match. The functional replacement identified in the cross-reference data is the WM8259SCDS/V, whose terminals and principal characteristics are described as consistent. Before substitution, verify the suffix-specific ordering information, pin table, sensor-input requirements, timing, and qualification for the finished product.
اطلاعات انطباق
The available product information identifies the manufacturer, device function, resolution, conversion rate, supply voltage, power consumption, and package but does not provide explicit compliance declarations. The AEC-Q100 field remains unknown because automotive qualification was not stated.