MAX394CAP+ - Quad SPDT 35Ω Analog Switch | Analog Devices
MPN: MAX394CAP+ ✓ فعالMAX394CAP+ نمای کلی
A CMOS analog switch is a semiconductor device that uses MOSFETs to connect or disconnect signal paths under digital control. The MAX394 belongs to the broader analog switch and multiplexer hierarchy, which sits within interface ICs and semiconductor signal-routing components. Each SPDT channel can select one of two signal sources or route a common node to a selected destination, depending on the application and external connection arrangement.
The MAX394CAP+ provides four 2:1 switch circuits with a specified 35 Ω on-resistance. Its low-voltage operation is suitable for systems using 5 V-powered logic and low-level analog signals. The 130 ns on-time and 75 ns off-time provide fast transition behavior, while break-before-make operation helps prevent two switched paths from conducting simultaneously during changeover. The 200 pA off-leakage specification supports low-level measurement and sampling circuits.
The 20-SSOP package provides a compact surface-mount footprint for multiplexed analog routing. Because the package is not thermally exposed, board layout and ambient conditions remain important when multiple channels switch continuously. Signal integrity is influenced by source and load impedance, cable or trace capacitance, supply bypassing, and the timing of control signals. The device’s analog characteristics should therefore be evaluated together with the complete signal path rather than treated as isolated switch ratings.
Typical uses include multimeter and oscilloscope input routing, data-acquisition systems, communication-interface signal multiplexing, automated test equipment, and industrial measurement modules. The four channels can support parallel routing or switching functions, reducing the number of discrete relays or mechanical switch elements required on a compact instrument board. The device is also useful when a circuit must select between sensors, amplifiers, or external test signals.
Designers should place the supply bypass capacitor close to the device and route high-impedance signal traces away from switching-node outputs to minimize coupling. Control signals should meet the device’s input logic levels, and unused inputs should be connected to defined potentials rather than left floating. Confirm that source and load voltages remain within the device’s absolute maximum ratings and signal limits before finalizing the analog front end.
This page combines the MAX394CAP+ device specifications, sourcing guidance, functional comparison, and application-focused design notes to support faster component selection and PCB implementation. It also distinguishes exact drop-in interchangeability from merely similar analog switches, helping engineers preserve package, pinout, timing, and channel requirements during redesigns.
جایگزینهای drop-in برای MAX394CAP+ — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
MAX394CAP
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
MAX394CAP+ حداکثر مقادیر مجاز و مشخصات الکتریکی
| Number of Circuits | 4 circuits |
| Multiplexer Configuration | 2:1 |
| Switch Configuration | SPDT |
| On Resistance | 35 Ω |
| ولتاژ تغذیه | 5 V |
| Maximum On Time | 130 ns |
| Maximum Off Time | 75 ns |
| Maximum Off Leakage | 200 pA |
| Switching Behavior | Break-before-make |
| Technology | CMOS |
| Product Type | Low-voltage quad SPDT CMOS analog switch |
| Number of Terminals | 20 terminals |
| بستهبندی | 20-SSOP |
| Package Code | SSOP |
| Package Shape | Rectangular |
| نوع نصب | Surface mount |
| Package Width | 5.30 mm |
| Package Body Length | 0.209 inch |
| Temperature Grade | Commercial |
راهنمای پیکربندی پین MAX394CAP+ 0.209 inch
پیکربندی پین برای MAX394CAP+ (پکیج 0.209 inch). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای MAX394CAP+.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
MAX394CAP+ مناسب است برای 6 کاربردs: Multimeter Signal Routing, Data Acquisition Multiplexing, Automated Test Equipment, Communication Signal Multiplexing, Industrial Sensor Selection, Oscilloscope Input Selection.
Multimeter Signal Routing
The MAX394CAP+ can route measurement signals among multiple input paths in a digital multimeter or handheld tester. Its four 2:1 channels provide compact SPDT routing, while 35 Ω on-resistance limits insertion loss and 200 pA off leakage helps preserve high-impedance measurements when a path is disconnected. The 130 ns on-time and 75 ns off-time support rapid range and function selection. Place the device near the measurement input so switched-node traces remain short, and account for the switch resistance when interpreting high-impedance readings.
پیشنهادی
Data Acquisition Multiplexing
The MAX394CAP+ is suitable for multiplexing sensor, amplifier, or test signals in a compact data-acquisition module. Each of its four 2:1 channels can select a signal path without requiring a separate mechanical relay. The 35 Ω resistance is practical for many low-impedance source networks, and the 75 ns off-time plus 130 ns on-time permit fast acquisition sequencing. Validate the source impedance, input capacitance, and settling time together because switching speed alone does not determine whether the selected node reaches an accurate measurement.
پیشنهادی
Automated Test Equipment
The MAX394CAP+ helps automate signal routing in test systems by selecting among DUT pins, fixtures, references, or injected signals. Four independently controlled SPDT channels reduce the amount of board space needed for discrete switching hardware. Its break-before-make behavior helps prevent unintended path overlap during changeover, while 35 Ω on-resistance and 200 pA leakage support low-level test paths. Designers should terminate unused switch inputs, keep control traces away from sensitive analog nodes, and verify that source and load voltages remain within the device ratings.
پیشنهادی
Communication Signal Multiplexing
The MAX394CAP+ can multiplex low-voltage communication or control signals when a compact board needs selectable routes among multiple nodes. Its CMOS implementation and low 200 pA off leakage reduce interference between disconnected paths, while four channels provide parallel routing opportunities. The 35 Ω resistance may require correction when driving a high-impedance or capacitive load. Keep traces short, provide a local supply bypass capacitor, and use defined logic levels to ensure reliable control transitions at the operating temperature.
پیشنهادی
Industrial Sensor Selection
The MAX394CAP+ can select among multiple industrial sensor outputs before amplification or digitization. Four 2:1 SPDT circuits allow several sensor channels to share downstream conditioning hardware, while the low off leakage of 200 pA limits coupling into inactive inputs. The 35 Ω on-resistance can add to the source impedance and should be included in sensor-range calculations. Protect external sensor wiring from transients, maintain common ground quality, and verify the maximum switch voltage before connecting field-sourced signals.
پیشنهادی
Oscilloscope Input Selection
The MAX394CAP+ can select test signals or input channels in a compact oscilloscope frontend. Its four 2:1 channels offer more routing density than individual mechanical selectors, and the 130 ns maximum on-time is short for many low-frequency measurement paths. The 35 Ω on-resistance and associated capacitance can alter probe loading and edge shape, so the complete input network should be characterized. Locate the device close to the protected input node and maintain short, guarded traces to minimize pickup and switching crosstalk.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای MAX394CAP+ — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | MAX394CAP |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 20-SSOP | 20-SSOP |
| Number of Circuits | 4 circuits | 4 circuits |
| Multiplexer Configuration | 2:1 | 2:1 |
| Switch Configuration | SPDT | SPDT |
| On Resistance | 35 Ω | 35 Ω |
| Maximum On Time | 130 ns | 130 ns |
| Maximum Off Time | 75 ns | 75 ns |
| Maximum Off Leakage | 200 pA | 200 pA |
| Supply Voltage | 5 V | 5 V |
| Switching Behavior | Break-before-make | Break-before-make |
| Ordering Designation | Plus-designated lead-free ordering code | Ordering code without plus suffix |
تفاوتهای کلیدی
- Four routing channels in one compact package (در مقابلMAX394CAP)
- Lead-free ordering designation (در مقابلMAX394CAP)
- Fast transition performance for compact analog routing (در مقابلMAX394CAP)
یادداشتهای طراحی
Treat the 35 Ω on-resistance as part of the complete source-to-load network. It can produce a measurable voltage division with the source impedance and interact with switch capacitance to slow edges. For high-impedance sensors or long cables, use an amplifier with low input capacitance or redesign the interface so the MAX394CAP+ switches a signal that tolerates its resistance and capacitance.
Place the device close to the routed signal nodes and keep switched-node traces short. Route high-impedance analog paths away from digital control traces and switching outputs, and use a ground plane that provides a low-impedance return path. When four channels switch simultaneously, check whether crosstalk between channels is acceptable for the signal bandwidth and source impedance.
Do not treat the MAX394CAP and MAX394CAP+ ordering codes as separate electrical designs without checking the manufacturer ordering table. Both provide the same four-channel 2:1 SPDT function in 20-SSOP, but purchasing requirements may distinguish the plus designation. Also ensure all unused inputs are tied to a defined potential and that control signals meet the specified logic levels.
اطلاعات انطباق
The MAX394CAP+ ordering designation includes a plus suffix commonly associated with lead-free versions, but no explicit RoHS, REACH, halogen-free, or conflict-minerals statement was established from the manufacturer documentation. AEC-Q100 is not applicable because this product is not an automotive-qualified device.