XC2C256-7CPG132I - 256-Macrocell 152MHz CPLD | AMD
MPN: XC2C256-7CPG132I ✓ فعالXC2C256-7CPG132I نمای کلی
A CPLD is a semiconductor in the programmable-logic hierarchy: it sits between fixed-function logic devices and larger FPGAs. Unlike mask-programmed logic, a CPLD can be configured after manufacture, shortening development cycles and enabling field updates. The XC2C256 belongs to the CoolRunner-II family and combines a nonvolatile XPLA3 architecture with advanced CMOS technology, providing deterministic timing for control logic, bus arbitration, state machines, and peripheral interfacing.
The principal device characteristics include 256 macrocells, approximately 6K system gates, a 6.7 ns speed designation, and a maximum operating frequency listed as 152 MHz. The device also provides low-power behavior, including a listed quiescent current of approximately 13 microamperes. Its industrial temperature designation and 132-ball surface-mount package support compact industrial embedded systems while supporting in-system programming for configuration and recovery.
In-system programmability allows a board designer to load or update the CPLD logic without replacing the component. This is valuable when field configuration must follow product revision, board test, or system diagnostics. Because the macrocell array uses nonvolatile configuration, the device does not depend on an external configuration PROM for normal operation after programming, simplifying board design and reducing the number of associated support components.
Typical applications include industrial controller logic, data acquisition front ends, communications protocol bridges, low-power embedded control, display and keypad scanning, general-purpose I/O expansion, and programmable signal conditioning. The 256-macrocell capacity allows several parallel state machines and interface blocks to be consolidated into one device, while the 152 MHz operating capability supports timing-sensitive control paths and data movers.
PCB design should account for the dense 132-ball CSBGA footprint, clean supply distribution, ground-plane continuity, and controlled clock routing. Program, configuration, and I/O signals should be assigned according to the DS094 pin-description tables. Because package variants change ball availability, verify the selected replacement against the complete pin table before committing it to an existing layout rather than relying only on the family name.
This page combines the manufacturer device documentation, package information, lifecycle context, application guidance, and same-package CoolRunner-II alternatives to support design selection and sourcing. It also distinguishes true pin-compatible device options from family members offered in other packages, preventing a package-only match from being mistaken for a drop-in replacement.
جایگزینهای drop-in برای XC2C256-7CPG132I — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای XC2C256-7CPG132I (همان فرمفاکتور و فوتپرینت) — متفاوت در Device Type, Package, Temperature Grade, Quiescent Current, RoHS Status.
XC2C256-7CPG132C
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XC2C256-10CPG132I
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XC2C256-10CPG132C
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XC2C256-6CPG132I
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XC2C256-6CPG132C
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XC2C256-7CPG132I حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | CoolRunner-II complex programmable logic device (CPLD) |
| Macrocells | 256 macrocells |
| System Gates | Approximately 6,000 system gates |
| Logic Architecture | XPLA3 macrocell architecture with nonvolatile configuration |
| Specified Device Speed | 6.7 ns |
| Maximum Operating Frequency | 152 MHz |
| جریان سکون | Approximately 13 uA |
| Programming Support | In-system programmable |
| بستهبندی | 132-ball CSBGA |
| Package Pin Count | 132 balls |
| نوع نصب | Surface mount |
| Temperature Grade | Industrial |
| Technology | Advanced CMOS |
| وضعیت RoHS | Compliant |
راهنمای پیکربندی پین XC2C256-7CPG132I 132 balls
پیکربندی پین برای XC2C256-7CPG132I (پکیج 132 balls). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای XC2C256-7CPG132I.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
XC2C256-7CPG132I مناسب است برای 6 کاربردs: Industrial Control Logic, Communications Interface Bridge, Data Acquisition Front End, Low-Power Embedded Interface, Programmable Signal Conditioning, Secure Configuration and Boot Control.
Industrial Control Logic
The XC2C256-7CPG132I is suitable for industrial controllers that combine several deterministic state machines with compact I/O logic. Its 256 macrocells and approximately 6,000 system gates provide enough capacity to consolidate sequencing, interlocks, alarm handling, and actuator-control functions into one programmable device. The 6.7 ns speed class supports operation up to 152 MHz, while the industrial-temperature suffix addresses equipment operating outside consumer-temperature conditions. Nonvolatile configuration preserves the control logic through power cycles, and in-system programmability supports firmware-like logic updates without replacing the device. The main design consideration is maintaining uninterrupted power and ground distribution around the dense 132-ball CSBGA footprint.
پیشنهادی
Communications Interface Bridge
The XC2C256-7CPG132I can implement protocol conversion, framing, FIFO control, and bus arbitration between systems with dissimilar interfaces. A 256-macrocell CPLD is useful when deterministic latency and compact logic density matter more than the flexibility of a large FPGA. The device’s maximum operating frequency of 152 MHz provides headroom for synchronous data paths, while its listed 13 uA quiescent current is favorable in distributed interface modules. Engineers should use the AMD DS094 pin descriptions to identify clock and I/O resources and should keep high-speed routing short, impedance controlled, and referenced to a continuous ground plane.
پیشنهادی
Data Acquisition Front End
The XC2C256-7CPG132I is well suited to coordinating sensors, counters, filters, and data-capture paths in a data-acquisition subsystem. Its programmable macrocell array can implement parallel data capture, trigger logic, channel multiplexing, and test-sequence control without a collection of separate glue-logic ICs. The 6.7 ns device speed permits timing-critical control paths up to the listed 152 MHz frequency. Its nonvolatile XPLA3 configuration also supports deterministic startup behavior after power restoration. For sensitive analog interfaces, keep the CPLD’s digital switching activity and supply paths separated from high-impedance sensor nodes, and validate acquisition timing against the worst-case system clock tolerance.
پیشنهادی
Low-Power Embedded Interface
The XC2C256-7CPG132I can expand the I/O capacity of a low-power embedded controller by implementing keypad scanning, display multiplexing, indicators, and peripheral selection logic. Its approximately 13 uA quiescent current complements the nonvolatile configuration architecture, which avoids retaining an external configuration PROM in the power path. The 132-ball CSBGA package supports compact board layouts, although its density requires careful escape-routing and multilayer construction. For battery-operated equipment, calculate the complete mode-dependent current budget, inhibit unnecessary clock trees, and ensure that all I/O levels remain compatible with the selected supply configuration.
پیشنهادی
Programmable Signal Conditioning
The XC2C256-7CPG132I can implement configurable digital signal conditioning around sensors, switches, and data converters. Typical functions include pulse shaping, edge alignment, programmable delays, event qualification, and redundant channel monitoring. With 256 macrocells and operation up to 152 MHz, the device can process multiple parallel channels while preserving deterministic behavior. Its in-system programmability allows the conditioning configuration to change with different external modules. Engineers should constrain timing-critical paths, use the manufacturer’s recommended clock and I/O conventions, and confirm that every alternate pin used in the design remains available in the exact 132-ball package ordering code.
پیشنهادی
Secure Configuration and Boot Control
The XC2C256-7CPG132I can support configuration sequencing, bus arbitration, peripheral enable control, and monitor signals in embedded systems that retain logic in nonvolatile form. Its in-system programming capability allows authorized configuration updates during manufacturing or service, reducing the need for external programmable logic. The industrial-temperature grade and 152 MHz maximum frequency make it suitable for coordinated startup and status-management functions in industrial equipment. To preserve configuration integrity, isolate programming access, define a deterministic fallback state, validate the supply during programming, and follow the AMD DS094 guidance for configuration pins, termination, and reset behavior.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای XC2C256-7CPG132I — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | XC2C256-7CPG132C | XC2C256-10CPG132I | XC2C256-10CPG132C | XC2C256-6CPG132I | XC2C256-6CPG132C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 132-ball CSBGA | 132-ball CSBGA - same | 132-ball CSBGA - same | 132-ball CSBGA - same | 132-ball CSBGA - same | 132-ball CSBGA - same |
| Macrocells | 256 macrocells | 256 macrocells | 256 macrocells | 256 macrocells | 256 macrocells | 256 macrocells |
| System Gates | Approximately 6,000 system gates | Approximately 6,000 system gates | Approximately 6,000 system gates | Approximately 6,000 system gates | Approximately 6,000 system gates | Approximately 6,000 system gates |
| Speed Class | 6.7 ns | 6.7 ns | 10 ns | 10 ns | 6 ns | 6 ns |
| Temperature Grade | Industrial | Commercial | Industrial | Commercial | Industrial | Commercial |
| Programming | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
| Architecture | XPLA3 CoolRunner-II | XPLA3 CoolRunner-II | XPLA3 CoolRunner-II | XPLA3 CoolRunner-II | XPLA3 CoolRunner-II | XPLA3 CoolRunner-II |
تفاوتهای کلیدی
- Combines industrial-temperature operation with a compact 132-ball CSBGA footprint (در مقابلXC2C256-7CPG132C)
- Provides a faster 6 ns speed class in the same package (در مقابلXC2C256-7CPG132I)
- Retains the same package and macrocell count while offering a slower timing grade (در مقابلXC2C256-10CPG132I)
یادداشتهای طراحی
Treat the 132-ball CSBGA as a high-density escape-routing problem. Follow the AMD DS094 package drawing and recommended land pattern, maintain the stated ball-pitch geometry, and use a multilayer board so power, ground, and signal routing can be separated. Provide short connections from supply balls to their plane and place local decoupling close to the associated device pins. Do not substitute another CoolRunner-II package drawing merely because the family and macrocell count match.
Assign core and I/O supplies from the manufacturer pin tables and the design’s actual voltage plan. The published device summary identifies advanced CMOS technology but does not establish the complete power-tree limits, so verify the required supply rails, sequencing, and operating combinations in DS094 before layout. Use low-impedance power planes, generous via arrays, and local high-frequency bypass. Confirm that every I/O driver remains within its voltage domain during configuration, reset, and power-down states.
Route clocks and high-speed interfaces over continuous reference planes and avoid crossings that force return-current discontinuity. Match trace lengths where source-synchronous timing requires it, keep configuration and programming nets away from sensitive analog or high-speed nodes, and terminate unused inputs according to the manufacturer’s recommendations. Because a speed-grade change can alter edge rates and timing margins, rerun static timing analysis after any replacement selection.
Do not treat every XC2C256 member as a drop-in equivalent. The XC2C256-7VQG100I and XC2C256-7TQG144C use different packages from the target’s 132-ball CSBGA, while the XC2C256-7FTG256I uses a different package and device class. Verify the exact ordering code, temperature grade, speed class, pin table, supported supply combination, and configuration-file compatibility before substituting any listed option.
اطلاعات انطباق
The XC2C256-7CPG132I is listed as RoHS compliant. REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the cited material.