XC2C256-7CPG132I - 256-Macrocell 152MHz CPLD | AMD
MPN: XC2C256-7CPG132I ✓ 啟用中XC2C256-7CPG132I 概覽
A CPLD is a semiconductor in the programmable-logic hierarchy: it sits between fixed-function logic devices and larger FPGAs. Unlike mask-programmed logic, a CPLD can be configured after manufacture, shortening development cycles and enabling field updates. The XC2C256 belongs to the CoolRunner-II family and combines a nonvolatile XPLA3 architecture with advanced CMOS technology, providing deterministic timing for control logic, bus arbitration, state machines, and peripheral interfacing.
The principal device characteristics include 256 macrocells, approximately 6K system gates, a 6.7 ns speed designation, and a maximum operating frequency listed as 152 MHz. The device also provides low-power behavior, including a listed quiescent current of approximately 13 microamperes. Its industrial temperature designation and 132-ball surface-mount package support compact industrial embedded systems while supporting in-system programming for configuration and recovery.
In-system programmability allows a board designer to load or update the CPLD logic without replacing the component. This is valuable when field configuration must follow product revision, board test, or system diagnostics. Because the macrocell array uses nonvolatile configuration, the device does not depend on an external configuration PROM for normal operation after programming, simplifying board design and reducing the number of associated support components.
Typical applications include industrial controller logic, data acquisition front ends, communications protocol bridges, low-power embedded control, display and keypad scanning, general-purpose I/O expansion, and programmable signal conditioning. The 256-macrocell capacity allows several parallel state machines and interface blocks to be consolidated into one device, while the 152 MHz operating capability supports timing-sensitive control paths and data movers.
PCB design should account for the dense 132-ball CSBGA footprint, clean supply distribution, ground-plane continuity, and controlled clock routing. Program, configuration, and I/O signals should be assigned according to the DS094 pin-description tables. Because package variants change ball availability, verify the selected replacement against the complete pin table before committing it to an existing layout rather than relying only on the family name.
This page combines the manufacturer device documentation, package information, lifecycle context, application guidance, and same-package CoolRunner-II alternatives to support design selection and sourcing. It also distinguishes true pin-compatible device options from family members offered in other packages, preventing a package-only match from being mistaken for a drop-in replacement.
直接替換替代品,適用於 XC2C256-7CPG132I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC2C256-7CPG132I (相同外形與佔位) — 差異在於 Device Type, Package, Temperature Grade, Quiescent Current, RoHS Status.
XC2C256-7CPG132C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC2C256-10CPG132I
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC2C256-10CPG132C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC2C256-6CPG132I
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC2C256-6CPG132C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC2C256-7CPG132I 最大額定值與電氣特性
| Device Type | CoolRunner-II complex programmable logic device (CPLD) |
| Macrocells | 256 macrocells |
| System Gates | Approximately 6,000 system gates |
| Logic Architecture | XPLA3 macrocell architecture with nonvolatile configuration |
| Specified Device Speed | 6.7 ns |
| Maximum Operating Frequency | 152 MHz |
| 靜態電流 | Approximately 13 uA |
| Programming Support | In-system programmable |
| 封裝 | 132-ball CSBGA |
| Package Pin Count | 132 balls |
| 安裝類型 | Surface mount |
| Temperature Grade | Industrial |
| Technology | Advanced CMOS |
| RoHS 狀態 | Compliant |
XC2C256-7CPG132I 132 balls 腳位配置指南
XC2C256-7CPG132I(132 balls 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC2C256-7CPG132I.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC2C256-7CPG132I 適用於 6 應用s: Industrial Control Logic, Communications Interface Bridge, Data Acquisition Front End, Low-Power Embedded Interface, Programmable Signal Conditioning, Secure Configuration and Boot Control.
Industrial Control Logic
The XC2C256-7CPG132I is suitable for industrial controllers that combine several deterministic state machines with compact I/O logic. Its 256 macrocells and approximately 6,000 system gates provide enough capacity to consolidate sequencing, interlocks, alarm handling, and actuator-control functions into one programmable device. The 6.7 ns speed class supports operation up to 152 MHz, while the industrial-temperature suffix addresses equipment operating outside consumer-temperature conditions. Nonvolatile configuration preserves the control logic through power cycles, and in-system programmability supports firmware-like logic updates without replacing the device. The main design consideration is maintaining uninterrupted power and ground distribution around the dense 132-ball CSBGA footprint.
推薦
Communications Interface Bridge
The XC2C256-7CPG132I can implement protocol conversion, framing, FIFO control, and bus arbitration between systems with dissimilar interfaces. A 256-macrocell CPLD is useful when deterministic latency and compact logic density matter more than the flexibility of a large FPGA. The device’s maximum operating frequency of 152 MHz provides headroom for synchronous data paths, while its listed 13 uA quiescent current is favorable in distributed interface modules. Engineers should use the AMD DS094 pin descriptions to identify clock and I/O resources and should keep high-speed routing short, impedance controlled, and referenced to a continuous ground plane.
推薦
Data Acquisition Front End
The XC2C256-7CPG132I is well suited to coordinating sensors, counters, filters, and data-capture paths in a data-acquisition subsystem. Its programmable macrocell array can implement parallel data capture, trigger logic, channel multiplexing, and test-sequence control without a collection of separate glue-logic ICs. The 6.7 ns device speed permits timing-critical control paths up to the listed 152 MHz frequency. Its nonvolatile XPLA3 configuration also supports deterministic startup behavior after power restoration. For sensitive analog interfaces, keep the CPLD’s digital switching activity and supply paths separated from high-impedance sensor nodes, and validate acquisition timing against the worst-case system clock tolerance.
推薦
Low-Power Embedded Interface
The XC2C256-7CPG132I can expand the I/O capacity of a low-power embedded controller by implementing keypad scanning, display multiplexing, indicators, and peripheral selection logic. Its approximately 13 uA quiescent current complements the nonvolatile configuration architecture, which avoids retaining an external configuration PROM in the power path. The 132-ball CSBGA package supports compact board layouts, although its density requires careful escape-routing and multilayer construction. For battery-operated equipment, calculate the complete mode-dependent current budget, inhibit unnecessary clock trees, and ensure that all I/O levels remain compatible with the selected supply configuration.
推薦
Programmable Signal Conditioning
The XC2C256-7CPG132I can implement configurable digital signal conditioning around sensors, switches, and data converters. Typical functions include pulse shaping, edge alignment, programmable delays, event qualification, and redundant channel monitoring. With 256 macrocells and operation up to 152 MHz, the device can process multiple parallel channels while preserving deterministic behavior. Its in-system programmability allows the conditioning configuration to change with different external modules. Engineers should constrain timing-critical paths, use the manufacturer’s recommended clock and I/O conventions, and confirm that every alternate pin used in the design remains available in the exact 132-ball package ordering code.
推薦
Secure Configuration and Boot Control
The XC2C256-7CPG132I can support configuration sequencing, bus arbitration, peripheral enable control, and monitor signals in embedded systems that retain logic in nonvolatile form. Its in-system programming capability allows authorized configuration updates during manufacturing or service, reducing the need for external programmable logic. The industrial-temperature grade and 152 MHz maximum frequency make it suitable for coordinated startup and status-management functions in industrial equipment. To preserve configuration integrity, isolate programming access, define a deterministic fallback state, validate the supply during programming, and follow the AMD DS094 guidance for configuration pins, termination, and reset behavior.
推薦
推薦產品摘要
工程參考資料,適用於 XC2C256-7CPG132I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC2C256-7CPG132C | XC2C256-10CPG132I | XC2C256-10CPG132C | XC2C256-6CPG132I | XC2C256-6CPG132C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 132-ball CSBGA | 132-ball CSBGA - same | 132-ball CSBGA - same | 132-ball CSBGA - same | 132-ball CSBGA - same | 132-ball CSBGA - same |
| Macrocells | 256 macrocells | 256 macrocells | 256 macrocells | 256 macrocells | 256 macrocells | 256 macrocells |
| System Gates | Approximately 6,000 system gates | Approximately 6,000 system gates | Approximately 6,000 system gates | Approximately 6,000 system gates | Approximately 6,000 system gates | Approximately 6,000 system gates |
| Speed Class | 6.7 ns | 6.7 ns | 10 ns | 10 ns | 6 ns | 6 ns |
| Temperature Grade | Industrial | Commercial | Industrial | Commercial | Industrial | Commercial |
| Programming | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
| Architecture | XPLA3 CoolRunner-II | XPLA3 CoolRunner-II | XPLA3 CoolRunner-II | XPLA3 CoolRunner-II | XPLA3 CoolRunner-II | XPLA3 CoolRunner-II |
主要差異化特點
- Combines industrial-temperature operation with a compact 132-ball CSBGA footprint (對比XC2C256-7CPG132C)
- Provides a faster 6 ns speed class in the same package (對比XC2C256-7CPG132I)
- Retains the same package and macrocell count while offering a slower timing grade (對比XC2C256-10CPG132I)
設計說明
Treat the 132-ball CSBGA as a high-density escape-routing problem. Follow the AMD DS094 package drawing and recommended land pattern, maintain the stated ball-pitch geometry, and use a multilayer board so power, ground, and signal routing can be separated. Provide short connections from supply balls to their plane and place local decoupling close to the associated device pins. Do not substitute another CoolRunner-II package drawing merely because the family and macrocell count match.
Assign core and I/O supplies from the manufacturer pin tables and the design’s actual voltage plan. The published device summary identifies advanced CMOS technology but does not establish the complete power-tree limits, so verify the required supply rails, sequencing, and operating combinations in DS094 before layout. Use low-impedance power planes, generous via arrays, and local high-frequency bypass. Confirm that every I/O driver remains within its voltage domain during configuration, reset, and power-down states.
Route clocks and high-speed interfaces over continuous reference planes and avoid crossings that force return-current discontinuity. Match trace lengths where source-synchronous timing requires it, keep configuration and programming nets away from sensitive analog or high-speed nodes, and terminate unused inputs according to the manufacturer’s recommendations. Because a speed-grade change can alter edge rates and timing margins, rerun static timing analysis after any replacement selection.
Do not treat every XC2C256 member as a drop-in equivalent. The XC2C256-7VQG100I and XC2C256-7TQG144C use different packages from the target’s 132-ball CSBGA, while the XC2C256-7FTG256I uses a different package and device class. Verify the exact ordering code, temperature grade, speed class, pin table, supported supply combination, and configuration-file compatibility before substituting any listed option.
合規資訊
The XC2C256-7CPG132I is listed as RoHS compliant. REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the cited material.