XC7A50T-L2CSG324E - Artix-7 FPGA, 52,160 LUTs | AMD
MPN: XC7A50T-L2CSG324E ✓ فعالXC7A50T-L2CSG324E نمای کلی
An FPGA is a programmable logic device in which configurable logic blocks, routing resources, transceivers, memory, and I/O blocks are arranged into a flexible digital system. In the semiconductor hierarchy, an FPGA sits between fixed-function logic devices and highly integrated programmable SoCs. Its LUT-based architecture allows designers to implement parallel control, datapath, signal-processing, and interface logic in one device, then update the configuration without changing the PCB.
The XC7A50T provides 52,160 logic cells organized in 4,075 logic array blocks, along with 2,764,800 total RAM bits. Its 210 user I/O support high-speed board-level connectivity, while the 28 nm process technology targets a balance between performance, density, and power. The 324-ball CSPBGA package also exposes dedicated configuration, clock, power, and user-interface resources through the AMD package pinout files.
Programming is performed through the standard Xilinx 7-series configuration architecture, allowing the device to be loaded by a configuration flash device, processor, or another suitable configuration source. Designers use the associated device project files, constraints, and Vivado implementation flow to map the required logic, place and route it, and generate the programming image for the exact XC7A50T-L2CSG324E target.
Typical uses include industrial automation and motion control, embedded vision preprocessing, robotics, communications gateways, test equipment, and low-cost high-speed signal-processing systems. The Artix-7 family is particularly useful when parallel logic, deterministic control, and programmable interface logic are more valuable than a large hard-processor subsystem.
Board design should follow the AMD package pinout files and the device power, decoupling, and configuration guidelines. Confirm that the PCB stack-up supports the 0.8 mm-pitch BGA geometry, provide the specified core and auxiliary supplies, and route configuration signals so the device remains in a safe state during power-up and reset.
This page consolidates the device's logic, RAM, I/O, package, and thermal characteristics with practical migration guidance. It also identifies speed- and temperature-grade alternatives that retain the 324-ball Artix-7 footprint, helping engineers compare upgrade paths without changing the board layout.
جایگزینهای drop-in برای XC7A50T-L2CSG324E — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای XC7A50T-L2CSG324E (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Speed Grade, Logic Cells, Process Technology, RoHS Status.
XC7A50T-3CSG324E
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
XC7A50T-2CSG324I
✅ جایگزین مستقیم✓ موجود
$25.4545 / واحد
مشاهده دیتاشیت ←XC7A50T-1CSG324I
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XC7A50T-L2CSG325E
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XC7A50T-L2CSG324E حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | Artix-7 Field Programmable Gate Array (FPGA) |
| Logic Cells | 52,160 cells |
| Logic Array Blocks | 4,075 LABs |
| Total RAM Bits | 2,764,800 bits |
| User I/O | 210 pins |
| Core Supply Voltage | 0.95 V to 1.05 V |
| Process Technology | 28 nm |
| Speed Grade | L2 |
| دمای اتصال کاری | 0 °C to 100 °C |
| بستهبندی | 324-LFBGA, CSPBGA |
| Package Code | CSG324 |
| Package Type | Square ball grid array |
| Ball Pitch | 0.8 mm |
| Terminal Form | Ball |
| Number of Terminals | 324 |
| نوع نصب | Surface mount |
| Programmable Logic | Configurable LUT-based architecture |
| Manufacturer | AMD / Xilinx |
راهنمای پیکربندی پین XC7A50T-L2CSG324E square ball grid array
پیکربندی پین برای XC7A50T-L2CSG324E (پکیج square ball grid array). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای XC7A50T-L2CSG324E.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
XC7A50T-L2CSG324E مناسب است برای 6 کاربردs: Industrial Automation and Motion Control, Embedded Vision Preprocessing, Robotics Control Platform, Communications Gateway, Test and Measurement Instrumentation, Video Signal Processing.
Industrial Automation and Motion Control
The XC7A50T-L2CSG324E is appropriate for deterministic machine-control systems that combine parallel motion logic, encoder decoding, and multiple communication interfaces. Its 52,160 logic cells and 4,075 LABs provide enough configurable resources for control-state machines and moderate datapath functions, while 2,764,800 RAM bits support packet buffering and status history. The 210 user I/O accommodate digital sensors, actuator outputs, and field-bus transceivers. A 0.95 V to 1.05 V core supply and 0 °C to 100 °C junction range fit controlled industrial enclosures when the board-level thermal design maintains the required margins.
پیشنهادی
Embedded Vision Preprocessing
The XC7A50T-L2CSG324E can implement parallel image filtering, thresholding, and frame-format conversion ahead of a higher-level processor. The LUT-based Artix-7 architecture allows multiple pixel lanes to be processed concurrently, and its 2,764,800 RAM bits provide line buffers, look-up tables, and FIFO storage. With 210 user I/O, the device can interface parallel sensors and memory while leaving logic resources for color conversion or object-detection prefiltering. The compact 324-ball CSPBGA package helps limit board area, but the 0.8 mm pitch requires a controlled PCB assembly process and careful high-speed routing.
پیشنهادی
Robotics Control Platform
The XC7A50T-L2CSG324E fits the parallel control architecture of an intelligent robot because it can run sensor fusion, trajectory generation, and actuator sequencing in programmable hardware. The 52,160 logic cells support concurrent control paths, while block RAM can hold calibration tables, trajectory parameters, and sensor history. Its 210 user I/O allow direct connection to encoders, motor drivers, limit switches, and auxiliary processors. This parallelism reduces the load placed on a separate host processor and provides predictable hardware response. The 324-ball package supports dense integration, although power delivery, thermal spreading, and connector signal integrity remain critical board-design responsibilities.
پیشنهادی
Communications Gateway
The XC7A50T-L2CSG324E is useful in protocol-conversion gateways where several serial links, packet buffers, and routing tables must operate concurrently. Its 210 user I/O support multiple interface lanes and control signals, while 2,764,800 RAM bits accommodate dual-port buffers and protocol state. The configurable logic can implement frame processing, checksum generation, and stream arbitration without relying entirely on a microcontroller. The 28 nm Artix-7 implementation also allows logic to be updated for new protocol revisions. Design teams should still apply the manufacturer's timing and routing guidance to every high-speed interface and verify signal integrity against the selected grade.
پیشنهادی
Test and Measurement Instrumentation
The XC7A50T-L2CSG324E can implement acquisition pipelines, pattern generation, and real-time analysis in a compact instrument. Parallel logic blocks are well suited to sampling control and timing checks, while the device's RAM supports circular capture buffers and calibration tables. Its 210 user I/O provide flexible connectivity to converters, trigger logic, and memory. Compared with a fixed-function controller, the FPGA permits measurement pipelines to be revised in software during development. The 0.95 V to 1.05 V core range requires careful decoupling and clock-power planning, while the 0 °C to 100 °C junction specification must be reconciled with enclosure temperature and airflow.
پیشنهادی
Video Signal Processing
The XC7A50T-L2CSG324E supports parallel video timing, pixel processing, and test-pattern generation when multiple channels or moderate-resolution streams are required. Its 52,160 logic cells can be divided among horizontal and vertical timing generators, color-processing pipelines, and diagnostic overlays, while 2,764,800 RAM bits can hold line and frame buffers. The 210 user I/O give designers a generous number of pixel, sync, and control connections. Because this is a BGA device, layer-transition planning and matched-length routing are essential for reliable video timing. Final timing closure must be verified for the exact L2 speed grade and operating conditions.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای XC7A50T-L2CSG324E — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | XC7A50T-3CSG324E | XC7A50T-2CSG324I | XC7A50T-1CSG324I | XC7A50T-L2CSG325E |
|---|---|---|---|---|---|
| Brand | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx | AMD / Xilinx |
| Package | 324-LFBGA, CSPBGA | 324-LFBGA, CSPBGA | 324-LFBGA, CSPBGA | 324-LFBGA, CSPBGA | 324-LFBGA, CSPBGA |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 52,160 | 52,160 | 52,160 | 52,160 | 52,160 |
| Logic Array Blocks | 4,075 LABs | 4,075 LABs | 4,075 LABs | 4,075 LABs | 4,075 LABs |
| Total RAM Bits | 2,764,800 bits | 2,764,800 bits | 2,764,800 bits | 2,764,800 bits | 2,764,800 bits |
| User I/O | 210 | 210 | 210 | 210 | 150 |
| Core Supply Voltage | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Speed Grade | L2 | 3 | 2 | 1 | L2 |
تفاوتهای کلیدی
- The L2 grade identifies the intended performance class while preserving the full 52,160-cell Artix-7 resource set. (در مقابلXC7A50T-1CSG324I)
- The E temperature designation identifies the operating grade used for this exact orderable device. (در مقابلXC7A50T-2CSG324I)
- The 210-user-I/O CSG324 configuration supports a broader parallel interface than the reduced-I/O CSG325 device. (در مقابلXC7A50T-L2CSG325E)
- The CSG324 package retains the higher-I/O Artix-7 variant for designs needing additional parallel connectivity. (در مقابلXC7A50T-3CSG324E)
یادداشتهای طراحی
Design the PCB around the CSG324 0.8 mm-pitch ball grid and follow the AMD package pinout files for land patterns and ball assignments. Confirm the board stack-up, pad design, solder-mask definition, and assembly process with the package drawing. Reserve unobstructed access for inspection or X-ray analysis because fine-pitch BGA solder joints cannot be visually verified from the top side.
Use the power rails, sequencing, and decoupling requirements specified for the XC7A50T in the manufacturer data sheet. Place bulk and high-frequency decoupling capacitors close to their associated supply and ground balls, and provide a low-impedance return path beneath the device. Treat the stated 0.95 V to 1.05 V range as the core operating range and do not infer limits for auxiliary rails from it.
Plan high-speed configuration, clock, and user interfaces before routing the rest of the board. Follow the manufacturer guidance for clocking and configuration pins, keep sensitive routes away from noisy switching nodes, and match interface topology to the selected I/O standard. After any grade change, rerun timing analysis and board-level signal-integrity checks rather than relying on the shared footprint alone.
The 324-ball CSPBGA offers many thermal-via and copper-plane opportunities, but those features must be connected to the device's thermal balls in accordance with the package drawing. Estimate junction rise from total device power, board thermal resistance, enclosure temperature, and airflow, then compare the result with the 0 °C to 100 °C operating junction range. A board that works on the bench may require added airflow in a sealed enclosure.
اطلاعات انطباق
No explicit compliance declarations for this exact orderable MPN were included in the manufacturer or distributor documentation. Confirm RoHS, REACH, halogen-free, and conflict-minerals status for the selected ordering code with AMD before release.