AMD

XC7Z035-1FFG900C - 275K Logic Cell Zynq SoC | AMD

MPN: XC7Z035-1FFG900C ✓ فعال
900-FCBGA (31 mm x 31 mm) Package 667 MHz Speed
حداقل سفارش: 1 |

XC7Z035-1FFG900C نمای کلی

The AMD XC7Z035-1FFG900C is a Zynq-7000 programmable SoC integrating a dual-core Arm Cortex-A9 MPCore processing system with a Kintex-7 FPGA fabric, 275K logic cells, and a 667 MHz processor operating frequency in a 900-FCBGA package measuring 31 mm by 31 mm. The device combines hard-processor peripherals, programmable logic, high-speed memory interfaces, and extensive general-purpose I/O within one heterogeneous system-on-chip.

A Zynq SoC is a programmable system-on-chip that combines a hardwired Arm Cortex-A9 processing system with an FPGA fabric in the same package. This product hierarchy—Zynq SoC, FPGA and CPLD, programmable logic, integrated circuit, and semiconductor—places the XC7Z035 at the intersection of embedded software execution and hardware-accelerated logic. The integrated architecture can reduce interconnects between the processor and programmable logic compared with a separate processor and FPGA design.

Key device characteristics include dual Arm Cortex-A9 MPCore cores, 275K FPGA logic cells, a 667 MHz operating frequency, a 900-FCBGA package, and 362 I/O according to the product listing data. The processing system includes on-chip memory and interfaces for external memory, while the Kintex-7 fabric supports hardware data processing, control logic, interface bridging, and accelerator functions. The Zynq-7000 architecture supports software control through the Arm Cortex-A9 subsystem and programmable hardware through the FPGA fabric.

The 31 mm by 31 mm FCBGA-900 construction provides a large ball array for high-density connectivity. Design implementation must account for the fine package pitch, multilayer PCB requirements, high-speed routing rules, power and ground distribution, and thermal performance. Because the device combines thousands of programmable logic elements with a complex processor subsystem, bitstream generation, embedded software configuration, memory-interface design, and signal-integrity verification form one integrated engineering workflow.

Typical applications include industrial automation, networked control systems, embedded vision, communications equipment, data acquisition, and high-performance embedded processing with FPGA-assisted acceleration. The programmable logic can implement parallel data paths, protocol interfaces, preprocessing pipelines, or custom accelerators while the Arm subsystem executes operating-system-level software, control logic, and network services.

A critical implementation requirement is to follow the AMD package pinout and PCB guidelines for the FFG900 package. Use the official package pinout files and Zynq-7000 documentation to assign power, ground, configuration, memory, high-speed transceiver, and I/O balls. Validate multilayer stack-up, ball escape routing, decoupling, clocking, and thermal design before fabrication.

This product page organizes the exact XC7Z035-1FFG900C identity, verified package and logic specifications, same-family replacement options, pricing status, and application guidance. It also emphasizes the engineering checks required when replacing a commercial-temperature FCBGA-900 Zynq device without changing the PCB footprint.

جایگزین‌های drop-in برای XC7Z035-1FFG900C — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای XC7Z035-1FFG900C (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Processor Core, Logic Cells, Product Type, Speed Grade.

AMD
Package: 900-FCBGA, 31 x 31 mm
Processor Core: Dual ARM Cortex-A9 MPCore
Logic Cells: 275,000 cells
مقایسه با XC7Z035-1FFG900C →
AMD
Package: 900-FCBGA (FFG900)
Processor Core: 2 x ARM Cortex-A9 MPCore
Product Type: Zynq-7000 Kintex-7 FPGA system-on-chip
مقایسه با XC7Z035-1FFG900C →

XC7Z035-1FFG900I

✅ جایگزین مستقیم
AMD
📦 900-FCBGA (31 mm x 31 mm)
Zynq-7000 adaptive system-on-chip · Kintex-7 · Dual ARM Cortex-A9 MPCore · 667 MHz · CoreSight · 275,000 cells · 18,022 Kb · 900 slices

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

XC7Z035-2FFG900I

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
AMD
📦 900-FCBGA (31 mm x 31 mm)
Zynq-7000 Kintex-7 FPGA system-on-chip · 275,000 cells · 2 x ARM Cortex-A9 MPCore · 800 MHz · 900 slices · 18,022 Kb · CoreSight · Zynq-7000

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

XC7Z035-L2FFG900I

✅ جایگزین مستقیم
📦 900-FCBGA (31 mm x 31 mm)
Same XC7Z035 family and 900-FCBGA footprint with an approximately 800 MHz speed class, about 20% faster than the 667 MHz target; L2 also changes the ordering specification.

📋 جایگزین مرجع (خارج از کاتالوگ)

XC7Z035-1FFG900C حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type Zynq-7000 system-on-chip FPGA
FPGA Family Kintex-7
Processor Core Dual-core Arm Cortex-A9 MPCore
Processor Frequency 667 MHz
Logic Cells 275K logic cells
Programmable I/O 362 I/O
بسته‌بندی 900-FCBGA (31 mm x 31 mm)
Package Pin Count 900 balls
نوع نصب Surface mount
SoC Architecture Zynq-7000 first-generation architecture

راهنمای پیکربندی پین XC7Z035-1FFG900C 900 balls

پیکربندی پین برای XC7Z035-1FFG900C (پکیج 900 balls). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 900 balls برای XC7Z035-1FFG900C

داده پین‌آوت تفصیلی موجود نیست برای XC7Z035-1FFG900C.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

XC7Z035-1FFG900C مناسب است برای 6 کاربردs: Industrial Automation and Motion Control, Embedded Vision and Image Processing, Communications and Network Equipment, Data Acquisition and Signal Processing, Secure Embedded Control, Aerospace and Defense Test Equipment.

🏭

Industrial Automation and Motion Control

The XC7Z035-1FFG900C fits industrial controllers that require deterministic I/O handling alongside a capable embedded processor. Its dual Arm Cortex-A9 cores can execute control software, diagnostics, communications, and supervisory logic at 667 MHz, while the 275K-cell Kintex-7 fabric can implement timing-critical motion paths, encoder interfaces, pulse processing, or custom fieldbus logic. The 900-FCBGA package exposes 362 I/O according to the product listing, supporting dense board-level integration. Designers should partition deterministic operations into programmable logic while keeping supervisory functions in software, then validate timing against the AMD device characterization and package requirements.

📺

Embedded Vision and Image Processing

The XC7Z035-1FFG900C is suitable for embedded vision systems that need sensor capture, preprocessing, and system control in one programmable device. The Kintex-7 fabric can accelerate parallel pixel operations, thresholding, filtering, or interface conversion, while the dual Cortex-A9 subsystem handles control, image configuration, networking, and application logic. Its 275K logic cells provide substantial parallel-processing capacity without using a separate FPGA link. Board-level implementation must account for the FCBGA-900 escape-routing density, memory-interface integrity, and thermal performance under sustained logic utilization.

🌐

Communications and Network Equipment

The XC7Z035-1FFG900C can serve as the central processing element in communication equipment requiring flexible hardware and software partitioning. The Arm subsystem can manage protocol stacks, management planes, and control services, while programmable logic handles packet framing, data-rate conversion, aggregation, or custom physical-layer interfaces. Its 667 MHz processor class and 275K logic cells permit a compact architecture that avoids using a separate processor and FPGA where the Zynq interconnect offers an advantage. Designers must use the official AMD transceiver, memory, and package guidance rather than infer interface capabilities solely from the logic-cell count.

🖥️

Data Acquisition and Signal Processing

The XC7Z035-1FFG900C fits high-throughput data-acquisition systems because its programmable fabric can execute parallel sampling, filtering, correlation, and buffering logic while the Cortex-A9 cores manage acquisition control, calibration, storage, and communications. The 275K logic cells and 362 listed I/O permit substantial integration in a single surface-mount device. For best results, place the parallel datapath in the FPGA fabric, use the processor for configuration and supervisory tasks, and separate analog input conditioning from the digital implementation. Memory topology, clock jitter, and high-speed routing must be reviewed against the AMD data sheet.

🧩

Secure Embedded Control

The XC7Z035-1FFG900C supports secure embedded-control architectures in which the Arm Cortex-A9 subsystem runs operating-system software and the programmable logic enforces hardware-level timing or interface policies. Functions such as protocol termination, cryptographic acceleration, watchdog enforcement, and safe state control can be implemented close to external interfaces, reducing dependence on software latency. This partition is useful in gateways and secure controllers where the device must combine a conventional processor environment with specialized hardware. Designers should still perform system-level threat analysis, validate boot and update procedures, and isolate critical functions according to the applicable safety and security requirements.

✈️

Aerospace and Defense Test Equipment

The XC7Z035-1FFG900C can form the processing core of ruggedized test, telemetry, and electronic warfare equipment when its environmental, qualification, and operating-temperature requirements satisfy the program specification. Its dual-core Arm subsystem can manage control software and telemetry, while the Kintex-7 fabric performs parallel channel processing, waveform generation, or protocol conversion. The device must be treated as a complex mixed-signal system: power sequencing, derating, radiation or environmental requirements, and long-term component sourcing may be more important than nominal processor speed. Obtain exact ordering details and qualification records before including the C-suffix part in a controlled program.

What is the AMD XC7Z035-1FFG900C?
The AMD XC7Z035-1FFG900C is a Zynq-7000 programmable system-on-chip combining a dual-core Arm Cortex-A9 MPCore processing system with a Kintex-7 FPGA fabric. According to the AMD product listing, the device contains 275K logic cells, operates at 667 MHz, provides 362 I/O, and is packaged in a 900-FCBGA measuring 31 mm by 31 mm.
What are the key specifications of XC7Z035-1FFG900C?
The XC7Z035-1FFG900C integrates dual Arm Cortex-A9 MPCore cores, 275K FPGA logic cells, a 667 MHz operating frequency, and 362 I/O in an FCBGA-900 package. AMD lists the device as a Zynq-7000 SoC with a Kintex-7 programmable-logic fabric and a 31 mm by 31 mm package, making it suitable for embedded processing, parallel data paths, and hardware-assisted control.
Where can I download the XC7Z035-1FFG900C datasheet PDF?
The official AMD Zynq-7000 data sheet is available through the AMD documentation link on this page. It covers the XC7Z035 family and provides the authoritative source for electrical characteristics, package information, processor and FPGA resources, memory interfaces, and device-specific limits. Use the official document rather than a third-party copy when designing power, pin assignments, and high-speed interfaces.
Where can I find the XC7Z035-1FFG900C pinout and package files?
AMD provides official Zynq-7000 package pinout files for the FFG900 device, while the Zynq-7000 technical reference material includes an FFG900 package-placement diagram. These resources should be used to assign every ball and PCB escape route. The FCBGA-900 layout is too dense to reproduce reliably without the official pinout files.
What is the XC7Z035-1FFG900C used for?
The XC7Z035-1FFG900C is used when a design needs both embedded software processing and dedicated programmable hardware in one device. Its dual Arm Cortex-A9 cores can run control software, networking stacks, or real-time tasks, while the 275K-cell Kintex-7 fabric can accelerate parallel algorithms, implement custom interfaces, collect high-rate data, or bridge peripherals.
Can XC7Z035-1FFG900I replace XC7Z035-1FFG900C?
The XC7Z035-1FFG900I is a pin-compatible same-package option for the XC7Z035-1FFG900C because both use the 900-FCBGA package and the listing data identifies the same 275K logic-cell configuration and 667 MHz operating class. The principal distinction is the device suffix, which commonly identifies the environmental grade. Confirm the complete ordering information, temperature range, and production requirements before substitution.
XC7Z035-1FFG900C vs XC7Z035-1FFG900I: which one should I choose?
Choose the XC7Z035-1FFG900C when its specified commercial environmental grade matches the product requirements; choose the XC7Z035-1FFG900I when the industrial-grade ordering option is required. Both are identified as 667 MHz, 275K-logic-cell Zynq devices in FCBGA-900 packages, so the decision depends on qualification, operating-temperature, and sourcing constraints.
When should I choose XC7Z035-1FFG900C over a faster XC7Z035 variant?
Choose the XC7Z035-1FFG900C when 667 MHz processing and 275K logic cells are sufficient and the commercial-grade ordering option meets the environmental requirement. A faster same-family variant can improve processor-bound performance but may change cost, power, thermal demand, and device availability. Use workload profiling rather than processor frequency alone to determine whether the additional speed is valuable.
Is XC7Z035-1FFG900C suitable for industrial control systems?
The XC7Z035-1FFG900C is architecturally suitable for industrial control because it combines deterministic programmable logic with an Arm Cortex-A9-based processing system. The processing system can execute control software while the FPGA fabric handles fast sampling, protocol conversion, motion-control timing, or peripheral interfacing. The final suitability depends on the specified temperature grade, voltage requirements, and qualification of the complete assembled system.
What is the best drop-in replacement for XC7Z035-1FFG900C?
The XC7Z035-1FFG900I is the closest identified same-package drop-in candidate because it retains the FFG900 package, 667 MHz operating class, 275K logic cells, and Zynq-7000 architecture. Faster same-family FFG900 options can also use the footprint, although they change the processor speed class. Verify pinout, power behavior, firmware support, temperature grade, and lifecycle status before approving a substitution.
What can replace XC7Z035-1FFG900C?
The identified replacement path is the XC7Z035 same-family FFG900 range, including the XC7Z035-1FFG900I for an industrial-grade alternative and faster FFG900 speed grades for workloads needing more processor performance. All candidates must remain in the 900-FCBGA package and be checked against the official pinout and device characteristics before being treated as drop-in replacements.
Is there a cross-brand drop-in equivalent for XC7Z035-1FFG900C?
No verified cross-brand drop-in equivalent is established for the XC7Z035-1FFG900C. Its combination of Arm Cortex-A9 processing, a specific Kintex-7 FPGA fabric, proprietary configuration system, and 900-ball package prevents a generic FPGA or SoC from being treated as interchangeable. Use the same-family AMD options for footprint reuse or request a formal engineering review through the Request a Quote form.
Where can I buy XC7Z035-1FFG900C online?
Use the Request a Quote form on this page to request current XC7Z035-1FFG900C availability, volume pricing, and lead time. The part is listed by several authorized supply channels, but inventory and commercial terms can change quickly. Providing the required quantity, date code preference, and target package or packing information helps obtain an actionable quotation.
What is the price of XC7Z035-1FFG900C?
Current XC7Z035-1FFG900C pricing depends on quantity, date code, warranty terms, and supply availability. Submit the required quantity through the Request a Quote form on this page for a current offer. Avoid using a starting-price figure as a production budget because it does not represent a guaranteed quantity-break quotation.
What is the lead time for XC7Z035-1FFG900C?
The current lead time for XC7Z035-1FFG900C should be confirmed through the Request a Quote form on this page. Lead time depends on factory inventory, scheduled production, package allocation, and the requested order quantity. Providing a target delivery date and acceptable date-code range enables the supply channel to confirm the most realistic schedule.
Is XC7Z035-1FFG900C in stock?
Stock for XC7Z035-1FFG900C varies by seller, quantity, and date code, so current availability should be requested through the Request a Quote form on this page. The device is currently represented in multiple distribution listings, but a listing alone does not guarantee material quantity at the requested grade. Specify quantity, target date code, and acceptable alternative date codes when requesting availability.

داده‌های مرجع مهندسی برای XC7Z035-1FFG900C — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the XC7Z035-1FFG900C when a design requires the confirmed 667 MHz dual-Cortex-A9 and 275K-logic-cell configuration in the 900-FCBGA package and its C-suffix ordering grade satisfies the environmental requirements. Select the XC7Z035-1FFG900I when the industrial-grade option is preferable and the same processing speed and footprint are required. Consider the XC7Z035-L2FFG900I when processor-bound performance justifies an approximately 800 MHz speed class, after checking power, thermal, software, and supply implications. The XC7Z035-2FFG900I is another same-family FFG900 candidate, but its exact electrical characteristics must be confirmed before release. No verified cross-brand drop-in replacement is available because the processor subsystem, FPGA architecture, configuration system, and dense package ballout are closely tied to the Zynq-7000 platform.

مقایسه با جایگزین‌ها

پارامتر این محصول XC7Z035-1FFG900I XC7Z035-2FFG900I XC7Z035-L2FFG900I
Brand AMD AMD AMD AMD
Package 900-FCBGA (31 mm x 31 mm) 900-FCBGA (31 mm x 31 mm) 900-FCBGA (31 mm x 31 mm) 900-FCBGA (31 mm x 31 mm)
Processor Core Dual Arm Cortex-A9 MPCore Dual Arm Cortex-A9 MPCore Dual Arm Cortex-A9 MPCore Dual Arm Cortex-A9 MPCore
FPGA Family Kintex-7 Kintex-7 Kintex-7 Kintex-7
Logic Cells 275K logic cells 275K logic cells 275K logic cells 275K logic cells
Ordering Suffix C suffix I suffix I suffix L2I suffix
SoC Architecture Zynq-7000 first-generation architecture Zynq-7000 first-generation architecture Zynq-7000 first-generation architecture Zynq-7000 first-generation architecture

تفاوت‌های کلیدی

  • Matches the processor speed class and logic capacity of the target (در مقابلXC7Z035-1FFG900I)
  • Provides higher processor performance in the same footprint (در مقابلXC7Z035-L2FFG900I)
  • Combines hard-processor and programmable-logic resources (در مقابلGeneric FPGA alternatives)

یادداشت‌های طراحی

Use the official AMD FFG900 pinout and package-placement documentation before routing the PCB. A 900-ball FCBGA requires a qualified multilayer stack-up, dense via escaping, and controlled pad geometry. Confirm ball assignments, power and ground balls, configuration pins, high-speed transceiver pins, and external-memory routing directly from the device documentation; do not derive the layout from the FFG676 package.

Plan the XC7Z035 power tree from the official power-supply requirements and board-level current budget. Separate the processor and FPGA supply domains where the device documentation specifies distinct rails, provide local high-frequency decoupling at every supply ball group, and keep switching-regulator layout away from sensitive memory and transceiver routing. Review inrush, startup sequencing, and load-transient margins across the complete operating-temperature range.

Thermal design must account for both processor activity and dense FPGA utilization because power dissipation can vary substantially with workload. Use the package thermal model and board assumptions appropriate to the selected PCB stack-up, provide uninterrupted copper wherever permitted, and evaluate the enclosure with realistic airflow. Validate the hottest operating case rather than relying on typical processor activity or logic utilization figures.

Route external-memory and high-speed transceiver interfaces with the topology, impedance, and spacing rules specified by AMD. A mismatch between the PCB stack-up and device escape routing can degrade edge quality even when nominal logic timing passes. Incorporate length compensation, return-path continuity, reference-plane transitions, and package-ball effects into pre-layout and post-route simulation.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

Compliance status is unknown because no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration appears in the product data. Confirm current compliance and qualification documents for the exact ordering suffix before production release.

جستجوهای مرتبط

XC7Z035-1FFG900C datasheet XC7Z035-1FFG900C pinout XC7Z035-1FFG900C datasheet pdf AMD XC7Z035-1FFG900C xc7z035 1ffg900i xc7z035 2ffg900i xc7z035 l2ffg900i xc7z035 2ffg676i xc7z035 1ffg676i xc7z035 3ffg676e XC7Z035-1FFG900C replacement XC7Z035-1FFG900C price XC7Z035-1FFG900C stock XC7Z035-1FFG900C equivalent XC7Z035 FFG900 package pinout

قطعات و اصطلاحات مرتبط

AMD XC7Z035-1FFG900C XC7Z035-1FFG900I XC7Z035-2FFG900I XC7Z035-L2FFG900I Zynq-7000 Kintex-7 FPGA system-on-chip FPGA and CPLD programmable logic dual-core Arm Cortex-A9 MPCore 667 MHz 275K logic cells 362 I/O FCBGA-900 900-FCBGA surface-mount package industrial automation embedded vision data acquisition communications equipment embedded processing hardware accelerator AMD Zynq-7000 package pinout files Zynq-7000 SoC Technical Reference Manual
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ